Military Engineer Services-MES has published Tender For Special Repair To Bldg No P439 Of Spear Offers Mess And Additional /Alternator To Bldg No Bcd11 12 13 14 31 32 And 33 In Q Zone Under Age Br Ii At Rms. Submission Date for this Tender is 18-12-2023. Building Work Tenders in rangapahar Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Nov-2023 | AMENDMENT IN BOQ FOR SPL REPAIR TO BLDG NO P439 OF SPEAR OFFRS MESS AND ADDN ALTN TO BLDG NO BCD11 12 13 14 31 32 AND 33 IN Q ZONE UNDER AGE BR II AT RMS | BOQ | 06-12-2023 |
| 2 | 28-Nov-2023 | AMENDMENT IN BOQ FOR SPL REPAIR TO BLDG NO P439 OF SPEAR OFFRS MESS AND ADDN ALTN TO BLDG NO BCD11 12 13 14 31 32 AND 33 IN Q ZONE UNDER AGE BR II AT RMS | BOQ | 06-12-2023 |
| 3 | 06-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-12-2023 |
| 4 | 13-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-12-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness,including Nanital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc complete all as specified and directed by Engr-in-Charge. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 4 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down Chowkhats or frames not exc. 1.5 sq. m each Ditto but with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engr-in-Charge. |
| 6 | Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by Engr-in-Charge. |
| 7 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by Engr-in-Charge. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge. |
| 10 | Demolition of reinforced cement concrete of any description and inany position not otherwise specifically provided for etc complete all as specified and directed by Engr-in-Charge. |
| 11 | Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed by Engr-in-Charge. |
| 12 | Dismantling boarding any description fixed in any position with nails etc complete all as specified and directed by Engr-in-Charge. |
| 13 | Demolition of unreinforced cement concrete of any description and inany position not otherwise specifically provided for etc complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 15 | all as per Item No 14 (here-in-before) but plain sheet as in ridges, roof covering or in cladding |
| 16 | S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre etc complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions etc complete all as specified and directed by Engr-in-Charge. |
| 19 | All as per ser item No 18 (here-in-before) but to curved surface |
| 20 | Extra over itemabove for any sunk or curved moulding etc complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of ceiling surfaces and applying two coats of oil bound distemper over a coat of primeretc complete all as specified and directed by Engr-in-Charge. |
| 22 | M & L for PCC (1:2:4) type B-0 (using 12.5mm gradedstone aggregate) 25 mm thick as in sub base to receive tiles finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.. |
| 23 | M&L for dark shade Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 24 | All as per ser item No 23 (here-in-before) but on vertical surfaces such as skirtinglaid over & including backing coat of 10 mm thick in CM 1:4. |
| 25 | M&L for dark shade Non-Skid Ceramic tiles 7 to 8 mm thick (Outdoor type) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed of 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles liad over & including screed bed of 10mm thick in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L for factory made flush shutters 35mm thick , solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 31 | All as per Item No 30 (here-in-before) but applying one coat of synthetic enamal paint on old surfaces |
| 32 | S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F 200 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F 150mm long aluminium alloy handled, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F in repairs 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller complete complete all as specified and as directed by Engineer-in-Charge.. |
| 37 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 38 | M&L for brick work with sub class "B" burnt bricks straight (using old size) or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 39 | All as per item No 38 (here-in-before) but in half brick thick wall built in CM (1:4). |
| 40 | M&L for Rendering 15mm thick cement plaster in CM (1:6) on brick work/concrete surfaces finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on brick work/concrete surfaces finished even and fair with & including WPC @ 2% by weight of cement content and without using extra cement complete all as specified and directed. |
| 42 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping, back filling, bed plates including necessary formwork etc complete all as specified and directed by Engr-in-Charge. |
| 43 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge. |
| 45 | S&Ffor providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19,aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows etc complete all as specified and directed by Engr-in-Charge. Note:- Glazing and Stainless steel wire mesh will be paid seperately. |
| 46 | S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 47 | S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm etc complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply and fix sheet glass selected quality 4.0mm thick, any size, tinted of approved colour fixed with rubber beading complete all as specifed and directed by Engr-in-Charge. |
| 49 | Supply and fixing3 mm thick frosted glass, ordinary quality and glazing with oil putty insquare n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge. |
| 50 | M&L for Second class clean sawnhardwood in scantling fixed in timber framed work complete all as specified and dirtected by Engr-in-Charge. |
| 51 | M&L for 3mm thick wall care putty on wall surfaces complete all as specified and as directed by Engr-in-Charge. |
| 52 | S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lenght i.e. Within 20mm of the lenght indicated conforming Fe-410-W (Gde E-250 quality -A) complete all as specified and directed by Engr-in-charge. |
| 53 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and directed by Engr-in-charge. |
| 55 | S&F bands, straps or stays , plain angle cleats or flat irons cleats or securing purlins to wooden trusses or rafters, knee pieces and similar small articales etc conformings to Fe-290 Grade E-165 complete all as specified and directed by Engr-in-charge. |
| 56 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia etc complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for preparation two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any des-cription, over 10cm in width or girth, not otherwise described etc complete all as specified and directed by Engr-in-Charge. |
| 58 | All as per Item No 57 (here-in-before) but applying one coat of synthetic enamel paint on old surfaces |
| 59 | M&L for applying two coats of OBD on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge. |
| 60 | M&L for applying two coats of Cement base paints on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge. |
| 61 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred /stopped endsetc complete all as specified and directed by Engr-in-Charge. |
| 62 | M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in Plinth Protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L for applying one coat of OBD on old plastered surfaces of wallsincluding preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge. |
| 64 | M&L for applying one coat of cement base paint on old plastered surfaces of wallsincluding preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge. |
| 65 | M&L for plain cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate as in roof kerb etc complete all as specified and directed by Engr-in-Charge. |
| 66 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed by Engr-in-Charge. |
| 67 | Taking up or down steel tubing 15mm bore and connectionscomplete all as specified and directed by Engr-in-Charge. |
| 68 | Taking up or down steel tubing 20mm bore and connectionscomplete all as specified and directed by Engr-in-Charge. |
| 69 | Supply and fix 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd by Engr-in-Charge. |
| 70 | Supply and fix 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd by Engr-in-Charge. |
| 71 | Taking down AC/Salt glazed ware pipes and fittings upto 110mm etc complete all as specified and directed by Engr-in-Charge. |
| 72 | M & L for in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 73 | M & L for repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 74 | M & L for in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed by Engr-in-Charge. |
| 75 | M & L for in repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed by Engr-in-Charge. |
| 76 | S & Fin repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge . |
| 77 | S & F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge. |
| 78 | S & F in repair 110mm bore PVC (SWR) branch piece single (Single Y equal or unequal) complete all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixing as in replacement 75mm bore PVC (SWR) floor trap (ISI Marked),outlet with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded store aggregate) and making good the disturbed surfaceto match with existing complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | Supply and fixing 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed. |
| 81 | Supply & fixing as in replacement 15mm Bib taps, chromium plated cast copper alloy with screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed by the Engr-in-Charge. |
| 82 | Supply and fixing as in replacement for 15mm Stop valves fancy type, chromium plated, cast copper alloy, screweddown, highpressure, screwed both ends foriron pipe orfor unions and fixedcomplete all as specified and as directed by Engr-in-Charge. |
| 83 | S&F in repairs for 15mm dia of pipe Anglevalves (concealed type),fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixedetc complete all as specified and as directed by Engr-in-Charge. |
| 84 | Supply and fix as in replacement of 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed by Engr-in-Charge. |
| 85 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screwscomplete all as specified and as directed by Engr-in-Charge. |
| 86 | Supply and fixing as in replacement 125mm dia brass chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipecomplete all as specified and as directed by Engr-in-Charge. |
| 87 | S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia,complete all as specified and as directed by Engr-in-Charge. |
| 88 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair,complete all as specified and as directed by Engr-in-Charge. |
| 89 | Supply and fixing in replacement brass chromium plated towel rail 600mm long fixed with and including Chromium platedbrass screwscomplete all as specified and as directed by Engr-in-Charge. |
| 90 | Supply and fixing as in replacement 100mm dia grating doom withwaste hole of PTMT (minimum weight 25gms) complete all as specified and as directed. |
| 91 | Supply and fixed in repair vanity cabinet of size 60 x 46cm, with drawer, swan neck mixture and mirrorscomplete all as specified and as directed by Engr-in-Charge. |
| 92 | Supply and fixing in repair vitreous china premium/ist quality wash down water closet dual type including flushing cistern & flush pipe and all other necessary accessories like rag bolts/gel gasket etc.complete all as specified and as directed by Engr-in-Charge. |
| 93 | Supply and fixing as in repair 15mm dia PVC connection pipe450mm long with PTMT nutscomplete all as specified and as directed by Engr-in-Charge. |
| 94 | S&F in repairsfor Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and ringsetc. complete all as specified and as directed by Engr-in-Charge. |
| 95 | M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity etc complete all as specified and as directed by Engr-in-Charge. |
| 96 | S&F rotational moulded polyethylene (duoble layer) 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed by Engr-in-Charge. |
| 97 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and as directed by Engr-in-Charge. |
| 98 | S&F in repairs CP toilet paper holder complete all as specified and as directed by Engr-in-Charge. |
| 99 | S&F in repairs peg set of Six chromium plated including fixing screw complete all as specified and as directed by Engr-in-Charge. |
| 100 | Demolition and breaking up drain pipes(salt glazed,stoneware, AC or reinforced concrete) set in cement "mortar 150 mm dia fixed in position complete all as specified and as directed by Engr-in-Charge. |
| 101 | M&L in repair for DWCPE (SN8) 150 mm (ID) diameter pipes laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing etc complete all as specified and as directed by Engr-in-Charge. |
| 103 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed by Engr-in-Charge. |
| 104 | S&F 10mm thick Toughned glass as in hinged doors, partitions utomatic doors and similar work includingcutting to shape, drilling holes required etc complete all as specified and as directed by Engr-in-Charge. |
| 105 | M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats etc complete all as specified and as directed by Engr-in-Charge. |
| 106 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m. etc complete all as specified and as directed by Engr-in-Charge. |
| 107 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface :- (i) 15mm thick cement plaster in cement mortar 1:4 (ii) Applying one coat of bitumen"s primer polymerized primer oil based coat, evenly @ 0.3 litre/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely. (iii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method. (iv)Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface. |
| 108 | S&F for 12mm thick toughness glass as in cubical including all fitting,fixturesrubber beading, jointing cleats etc complete all as specified and as directed by Engr-in-Charge. |
| 109 | Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as specified and directed by Engr-in-Charge. |
| 110 | Demolition of reed, lathing, single or double, including battens and olaster or chicken wire lathing complete all as specified and directed by Engr-in-Charge. |
| 111 | Supply and fixing 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste etc complete all as specified and directed by Engr-in-Charge. |
| 112 | M & L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and drawing etc complete all as specified and directed by Engr-in-Charge.. |
| 114 | S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with eat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification and drawing etc complete all as specified and directed by Engr-in-Charge. |
| 115 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fixing 100mm size stainless steel butt hinges,medium weight, hot rolled complete all as specified and directed by Engr-in-Charge. |
| 117 | Supply and fixing 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge. |
| 118 | S & F Aluminium anodized, barrel tower bolts, 150mm long of extruded section etc complete all as specified and directed by Engr-in-Charge. |
| 119 | Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge. |
| 120 | Supply and fixingfor 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engr-in-Charge. |
| 121 | Writing letters or figures with synthetic enamel paint (Block, Roman, Italic or Indian) not exceeding 30cm high over old painted surfacescomplete all as specified and directed by Engr-in-Charge. |
| 122 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge. |
| 123 | Supply and fixing as in replacement vitreous Chinawash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover and making all necessary connections complete as specified and as directed by the Engineer-in-Charge. |
| 124 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white withfront or back inlet with integral "foot rests including provn of lime concrete bedding including connections to "flushing cistern/pipe complete all as specified and directed including 100mm CI "P" trap. |
| 125 | S & F Vitreous china bowl urinal flat back, size of 465x355x265mm white with grating and union for discharge pipe( excluding flushing cistern, flush pipe and waste pipe etc complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fixing as in replacement 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Material and labour as in replacement looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. Make : Saint Gobain/Modi float /Atul / Kohinoor. |
| 128 | M&L for 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards etc complete all as specified and directed by Engr-in-Charge. |
| 129 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed by Engr-in-Charge. |
| 130 | Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesfor mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. ake: finolex/Richa/RR Kabel. Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa |
| 131 | Onelight/fan pointcontrolled by one, one way switch. |
| 132 | One 3 pin socket outlet 5 Amps on the same board with other switches |
| 133 | One 3 pin socket outlet 5 Amps on the independent board. |
| 134 | All as per item No 130 (here-in-before) but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly |
| 135 | M&L for Modular Switch 1 way 6A,1 moduleetc complete all as specified and directed by Engr-in-Charge. |
| 136 | M&L for modular switch 1 way 16A, 1 module etc complete all as specified and directed by Engr-in-Charge. |
| 137 | M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and directed by Engr-in-Charge. |
| 138 | M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and directed by Engr-in-Charge. |
| 139 | M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and directed by Engr-in-Charge. |
| 140 | M&L for Metal flush box 1/2 module etc complete all as specified and directed by Engr-in-Charge. |
| 141 | M&L for Metal flush box 3 module etc complete all as specified and directed by Engr-in-Charge. |
| 142 | M&L for Metal flush box 4 module etc complete all as specified and directed by Engr-in-Charge. |
| 143 | M&L for Metal flush box 6 module etc complete all as specified and directed by Engr-in-Charge. |
| 144 | M&L for Metal flush box 18 module etc complete all as specified and directed by Engr-in-Charge. |
| 145 | M&L for modular white cover plate with frame 2 module complete all as specified and as directed by Engr-in-Charge. |
| 146 | M&L for modular white cover plate with frame 3 module complete all as specified and as directed by Engr-in-Charge. |
| 147 | M&L for modular white cover plate with frame 4 module complete all as specified and as directed by Engr-in-Charge. |
| 148 | M&L for modular white cover plate with frame 6 module complete all as specified and as directed by Engr-in-Charge. |
| 149 | M&L for modular white cover plate with frame 18 module complete all as specified and as directed by Engr-in-Charge. |
| 150 | M&L for Modular bell push switch 5 amps piano type flush type etc complete all as specified and as directed by Engr-in-Charge. |
| 151 | M&L for replacement of Bell AC 230 volts musical type etc complete all as specified and as directed by Engr-in-Charge. |
| 152 | M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed by Engr-in-Charge. Make :Anchor/Plaza/SSK |
| 153 | S&F for LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incltaking down UNSV flexible hose from ceiling rose to fitting complete all as specified and as directedby Engr-in-Charge.Make : Havells/Bajaj/CG/Philips |
| 154 | S&F for LED light fitting 1 x 10 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incltaking down UNSV flexible hose from ceiling rose to fitting etc complete all as specified and as directed by Engr-in-Charge. |
| 155 | Supply , fixing and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down UNSV and all as specified and directed by Engr-in-Charge.Make : Havells/CG/ Bajaj/ Philips |
| 156 | M&L for Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5W LED filament lamp E27 base complete all as specified and directed by Engr-in-Charge. |
| 157 | M&L for wall Picture light, 7 Watt, bronze finish for superior feel long life LED light source warm 3000k with good colour complete all as specified and directed by Engr-in-Charge. |
| 158 | Supply and fixing LED luminaire 600 mm x 600 mm, 36/42 watt, LED Tunable Panel light fixtures with remote enable220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete incl taking down old UNSV all as specified and as directed by Engr-in-Charge. Make :Havells/Bajaj/CG/Philips |
| 159 | M&L for 3 Watt Aluminium bedside light fitting , Warm white, standard complete all as specified and directed by Engr-in-Charge. |
| 160 | M&L for sub main wiringtwo run 6.0 Sq mm andone run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC conduit pipeetc complete all as specified and as directed by Engr-in-Charge. NOTE:- two runs of 6.0 Sq mm +one run of 6.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length |
| 161 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge. |
| 162 | M&L for LED strip 25W Non-integral flexible LED strip light high brightness for indoor applications. Strip can be cut at marked interval to suit desired lengthexisting space/ by cutting suitable space in false ceiling to mount light fitting with required handing/ fixing arrangementincl taking down old unsv light fittingcomplete all as specified and as directed by Engr-in-Charge. |
| 163 | M&L for 25W LED strip driver IP20 complete all as specified and as directed by Engr-in-Charge. |
| 164 | Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.Note : Old Wall mounted fan deposit MES Store (AGE E/M) Make : Crompton/Bajaj/Havells |
| 165 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, 15 Amp top plug complete all as specified and as directed by Engr-in-Charge. |
| 166 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge.Make : Usha/Bajaj/CG |
| 167 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by Engr-in-Charge.Make : Bajaj/CG/V-Guard |
| 168 | Supply and fix Rigid non-metallic PVC conduit 25 mm inclusive of all tees, bends, elbows, reducers, bell mouth tube ends, junction boxes and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed by Engr-in-Charge. |
| 169 | S&F for Distribution board flush type for connection ofTelephone socket including with PVC Conduit pipe andwall chasies cuttingmaking good the distrubed all accessorises etc complete all as specified and as directed by Engr-in-Charge. |
| 170 | M&L for motor starter S.P .32Acompleteincl taking downold UNSVall as specified and as directed by Engr-in-Charge. Make: Havells/HPL/Legrand |
| 171 | M&L Distribution board double door type (for incoming MCCB 100 Amps 4 Pole & out going MCBs) DPX 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity including taking down old unsv DB of any capacitycomplete all as specified and as directed by Engr-in-Charge. |
| 172 | M&L for PVC pole junction box of size 250x200x100mm with inbuilt aluminuim bus bar (02 Nos) of suitable size, with one MCB SPN 10 Ampsfitted over bus bar fixing topole incl clamps, nuts, bolts, washers etc complete all as specified and as directed by Engr-in-Charge. Make :Sintex/Hensel/C&S. |
| 173 | M&L for MCCB 4P, 415 Volts, adjustable type, 100 Amps with breaking capacity 16 KA, suitable for fixing in MCB DB including taking down old unsv MCCB complete all as specified and as directed by Engr-in-Charge. |
| 174 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity completeincl taking down old UNSVall as specified and as directed by Engr-in-Charge. Note :MCB SPN/SP will be measured and paid separately.M |
| 175 | Supply and fixing MCB SPN 32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old UNSV complete all as specified and as directed by Engr-in-Charge. M |
| 176 | Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down UNSV old complete all as specified and as directed by Engr-in-Charge. M |
| 177 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge. |
| 178 | M&L for Garden light LED 8w bamboo type of 1 mtr long IP65 energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source complete all as specified and directed by Engr-in-Charge. |
| 179 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 4 sq mm, 2 core complete all as specified and as directed by Engr-in-Charge. |
| 180 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 50 sq mm, 3.5 core complete all as specified and as directed by Engr-in-Charge. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 181 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed by Engr-in-Charge. |
| 182 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed by Engr-in-Charge. |
| 183 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed by Engr-in-Charge. |
| 184 | M&L for spread fine river sand in trenches complete all as specified ans as directed by Engr-in-Charge. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 185 | M&L for laying brick sub class "B" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed by Engr-in-Charge. |
| 186 | Supply & laying tubes "light grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. |
| 187 | Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
