|
| 1 | Contract Details |
| 2 | M&L of demolishing Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed and specified. |
| 3 | M&L of excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in hard soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as directed and specified. |
| 4 | M&L of cement concrete in foundations, filling and mass concrete of type B2 1:2:4 (40 mm graded aggregate) complete all as directed and specified. |
| 5 | M&L for Brick work with flyash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 6 | M&L for damp proof course to horizontal or vertical surfaces including necessary formwork In 25 mm thick cement concrete 1:2:4, type B-0 complete all as directed and specified. |
| 7 | M&L of Hardcore broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all complete as specified and directed. |
| 8 | M&L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) in RCC bench all complete as specified and directed. |
| 9 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. making flat rough finished surface of concrete also splays between floors and beams, etc all complete as specified and directed. |
| 10 | M&L for Reinforced cement concrete (nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5m span of TypeB0 1:2:4 (12.5mm graded aggregate) all complete as specified and directed. |
| 11 | M&L for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 12 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 13 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all complete as specified and directed. |
| 14 | M&L for Reinforced cement concrete (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all complete as specified and directed. |
| 15 | M&L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coatall complete as specified and directed. |
| 16 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:3 cement plaster all complete as specified and directed. |
| 17 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:4 cement plaster all complete as specified and directed. |
| 18 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:6 cement plaster all complete as specified and directed. |
| 19 | M&L of distempering walls with cement paint (both exterior and interior) all complete as specified and directed. |
| 20 | M&L of distempering ceiling with cement paint all complete as specified and directed. |
| 21 | M&L for fabrication and installation of Sign board with ACP sheet, Iron frame (327\"X36\"), Stainless Steel letters of size 12\"X3\" and Logo size 26\", back LED light including electric connection with 2.5 sqmm copper conductor cable(FRLS) etc.complete fixing and transpoartation at site complete all as specified and directed by Engg-in-Charge. |
| 22 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. |
