|
| 1 | Removing Old lime or cement plaster including raking out joints 12mm deep and removing the debris within 50m leadwithcostofall labour etc. complete as directed by the Engineer in charge. Ground floor |
| 2 | Firstfloor |
| 3 | Dismantling & removing doors, windows & ventilators including removal of frame, hinges, fasteningand stacking the useful materials for reuse&removing the debris within 50m leadwithcostofall labour etc. complete as directed by the Engineer in charge.Ground floor |
| 4 | Dismentaling brick or stone masonry in lime or stone mortar above 3m. Height including stacking the useful materials for reuse and removing the debries within 50 m. lead withcostofall labour etc. complete as directed by the Engineer in charge. Ground floor |
| 5 | Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m leadwithcostofall labour etc. complete as directed by the Engineer in charge. Lead withcostofall labour etc. complete as directed by the Engineer in charge. Ground floor |
| 6 | Firstfloor |
| 7 | Earth work in excavation in foundation in all kinds of soil including dressing and leveling the bed and depositing the excavated earth at places awayfrom work site with all leadsand lifts including cost of alllabour ,T&Pand dewatering if required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 8 | Supplying filling in foundation and plinth with sand inlayersnot exceeding 22.5cm (9\") thick includingwatering and ramming withcost conveyance, royalties, taxes of the materials and labour with T&Prequired for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 9 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (1 ½\") size clean hard black H.G. metal of approved qualityand from approved quarryincluding hoisting, lowering andlaying concrete in layers not exceeding 15cm (6\")thickto the required level ramming watering and curing etc. completeincluding cost ,conveyance, royalty, taxes of all materials and labour with T&Prequired for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 10 | Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge. Foundation |
| 11 | Back Filling of surplus excavated earth at work site by initial lead and lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge |
| 12 | R.C.C. work of M.20 in Foundation using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing andnecessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 13 | R.C.C. work of M.20 in Plinth band using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing andnecessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 14 | R.C.C. work of M.20 in Column & Beam using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing andnecessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. Ground Floor |
| 15 | R.C.C. work of M.20 in Roof slab using12 mm size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing andnecessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. Ground Floor |
| 16 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required)the M.S. Rods or Tor steel and binding wires andtying the grills hoisting lowering and placing in proper position as required for RCC works withcost, conveyance and taxesof M.S. Rods or Tor steel and bindingwires of 18 to 20 gauge and labour with T&Prequired for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 17 | Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge. Ground Floor |
| 18 | Providing 12 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor |
| 19 | First Floor |
| 20 | Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 21 | First Floor |
| 22 | Providing 6 mm thick C.P. with C.M. (1:4) on inside surface of exposed RCC with sand for mortar and finished smooth to RCC work after closed deep chipping & slurry treatment including watering and curing etc complete with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground floor |
| 23 | First Floor |
| 24 | 25mmthick grading concretewith C.C ( 1:2:2 )with 6 mm size HGH .G. Chips of approved quality & from approved quarryincludinglaying concrete, watering curing including cost , conveyance , royalty, taxes of materials with all labour and T&P articles required for the worketc. complete in all respect as per direction of the Engineer in charge .Ground Floor |
| 25 | Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 26 | Supplying of M.S.Doors, M.S. Gate etc including cost, conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge . Ground Floor |
| 27 | Supplying, fitting, fixing of Kota tiles of size above 0.1sqm (Pulished) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 28 | First Floor |
| 29 | Supplying of M.S.Windows/ Ventilator of fully glazed etc including cost, conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge.Ground Floor |
| 30 | Supplying, fitting, fixing of Granite tiles of size 0.1 to 0.4sqm (Pulished) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 31 | Supplying, fitting, fixing of Granite tiles of size ab ove 0.1sqm (Pulished) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. . Ground Floor |
| 32 | Supply of Labour for shiftingof materials from rooms etc. complete in all respect as directed by the Engineer-in-charge. |
| 33 | Supplying of M.S. Grills etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge . |
| 34 | Providing fitting and fixing Roller Blind of 0.6mm or above to windows of approved make & shed including fitting fixing of all required accessories of approved quality including cost conveyance, royalty and taxes of all materials, all labour sundries T&P etc complete required for the work complete as directed by the Engineer-In-Charge. |
| 35 | Scarping old paints with scapers, sand papering & washing with soap water or soda including scaffolding charges up to 5.0m hetght with cost ofalllabour etc. complete in all respect as per direction of the Engineer-in-charge. |
| 36 | Finishing plastered surfaces with cement washing one coat using cement on outside plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor |
| 37 | Finishing plastered surfaces with cement putty (water based) of approved make on inside plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor |
| 38 | Finishing plastered surfaces with cement putty (water based) of approved make on Outside plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 39 | First Floor |
| 40 | Finishing inside plastered surfaces with water proofing cement paint of approved shade on new work of two coats over a coat of primer in all floors, all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor |
| 41 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Ground Floor |
| 42 | First Floor |
| 43 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.Ground Floor |
| 44 | First Floor |
| 45 | Painting two coats with distemper over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 46 | First Floor |
| 47 | Painting two coats with approved enamel paints of approved colour, shade Iron /work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Ground Floor |
| 48 | First Floor |
| 49 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer over new/ old Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Ground Floor |
| 50 | First Floor |
| 51 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer over new/ old Wood work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..Ground Floor |
| 52 | First Floor |
| 53 | EI Work: PART- A ( Internal Electrification)Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )Group A |
| 54 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group B |
| 55 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group C |
| 56 | Recessed wiring to Fan Point in...Group B |
| 57 | Recessed wiring to Fan Point in... Group C |
| 58 | Swich Boards S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 59 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 60 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 61 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 62 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover. |
| 63 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection |
| 64 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover |
| 65 | 4 Modular box with base & cover |
| 66 | 6 Modular box with base & cover |
| 67 | 12 Modular box with base & cover |
| 68 | Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard). 2x1.5+1x1.5 (1.8.1) |
| 69 | 2x2.5+1x1.5 (1.8.2) |
| 70 | 2x4+1x1.5 (1.8.3) |
| 71 | 2x6+1x2.5 (1.8.4) |
| 72 | 4x4+2x2.5(1:8:9) |
| 73 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 74 | Circuit Breakers S/F of \"B/C/D\" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 75 | S/F of \"B/C/D\" series FP MCB of 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required Four pole (FP) (2.5.5) |
| 76 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.). S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 77 | Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) .S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 78 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 79 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 80 | FittingsS/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 81 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-HS/Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS ) |
| 82 | S/F step type modular fan regulator |
| 83 | Supply & Fixing of 45-48 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 84 | PART-B(Upgradation to Smart Class Room) Supply and installation of Interactive Display with OPS - 75\" Automatic Data Processing Interactive Unit, 4K UHD Interactive Display with Built-In Android 11 OS,32 GB Memory,8GB RAM and recognizes up to 20 Unique Points of touch sensitive as well as Pen drive and OPS:- i5 Processor, 8GB RAM, 256 GB SSD, Windows 11 IoT (GAC). Make:LG/Samsung |
| 85 | Interactive Board Back Panel with Cabinet and sliding Green-White Board (15’ x 7’10”) |
| 86 | PART-C(Sound System)Supply and Fixing of One-Way C ompact PA Wall Speakers Make: Ahuja/Bosch/Sennheiser |
| 87 | Supply and Fixing of Conference System Chairman Unit Make: Ahuja/Bosch/Sennheiser |
| 88 | Supply and Fixing of PA Mixer Amplifiers with Digital Player200 WATTS Make: Ahuja/Bosch/Sennheiser |
| 89 | PH Work: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor C-PVC pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. a).20mm dia C-PVC pipes |
| 90 | b).25mm dia C- PVC pipes |
| 91 | b).32mm dia C- PVC pipes |
| 92 | supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.G.F |
| 93 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.(Jaguar Make) a).15mm dia CP Bib Cock (Short Body) |
| 94 | b)15mm dia CP Bib Cock (Long Body) |
| 95 | c).15mm dia CP Angle Stop Cock |
| 96 | d).15mm dia CP Pillar Cock |
| 97 | e).15mm dia.C.P conceled stopcock |
| 98 | f).15mm dia CP Push Cock |
| 99 | g).CP Flange |
| 100 | h).CP Extention Piece |
| 101 | i).25mm dia GM fullwayValve |
| 102 | j).32mm dia GM fullwayValve |
| 103 | k) health fuccet |
| 104 | l) 2in 1 Bib cock |
| 105 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C 15 mm dia C.P Shower with arm (Jaguar make) |
| 106 | Supplying all material, labour, T&P and providing and fixing P.V.C water storage tank including cutting holes through the tank and fixing MS tubes and fitting and providing extra socket and jam nuts fixing ball valves etc. Including hoisting and placing the tank to the required position and including hoisting, laying, watering, curing, conveyance of all materials to worksite ,payment of royalty ,taxes etc. complete as per specification and direction of E.I.C. (Make: Sintex / Supreme / Oriplast / Hariplast). 2000 lits capacity on the roof of Second Floor |
| 107 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 lits capacity on the roof of secondfloor |
| 108 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm diameter U-PVCpipes |
| 109 | b).110mm U-PVC P-trap |
| 110 | c).110mm U-PVCsingle junction door |
| 111 | e).110mm U-PVCdoor bend |
| 112 | f).110mm U-PVCOffset |
| 113 | g).110mm U-PVCplain bend |
| 114 | h).110mm U-PVCvent cowl |
| 115 | i).125 mm dia C.P Grating |
| 116 | j).75mm diameter U-PVCpipes |
| 117 | k).75mm PVCBend |
| 118 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. a).375 mm thick wall |
| 119 | b).250 mm thick wall |
| 120 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrestetc all complete as per specification and direction of the E.I.C.(Parryware / Hindware /Cera / Neycer) .a).580mm size Orissa pan |
| 121 | b).580mm size EWC with P & S trap with seat cover |
| 122 | c) Flat back lipped wall Urinal (medium) with spreder |
| 123 | d) Partion wall for Urinal |
| 124 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. a).10 lit PVC L/L Cistern |
| 125 | Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.a).560mmx455mm Counter top basin (Parryware / Neycer/ Hindware/Cera) |
| 126 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size B.E Mirror (fixed type) |
| 127 | Supplying all materials,labour,T&P and fixing standard size shelf with C.P. brass brackets& guard rails complete fixed to woodenplugs with C.P.screws as per specification and direction ofE.I.C. |
| 128 | Supplying all materials,labour, T&P and fixing standard sized CP towel ring/rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. CP towel ring |
| 129 | 20mmx600mm long CP towel rail |
| 130 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. CP soap holder |
| 131 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 132 | Supplying all materials, labour, T&P and fixing granite in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 133 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. |
| 134 | Supplying all labour,materialsT&P and fitting , fixing of door frame made of FRP. profilesof size40mmx48mm.The vertical profiles joined to the horizontal after inserting MS/Fiber\"L\" angles of size 200mmx100mm and self tapping screws.A one meter run reinforcement provided along the sheet of the frame where the door is to be hanged.It is to be fixed to the walls with steelsecews and rawal plugs all complete as per thedirection of E.I.C. (FRP door frame) |
| 135 | Supplying all labour,materialsT&P and fitting , fixing of FRP door shutter to be made up of selective FRP. profiles .The styles and rails are made up of section measuring 24 mm x 59 mm.A lock rail each provided horizontallyat the required place for strength and firmness measuring 24mmx100 mm.The panel are provided of size measuring 200mmx20mm .All the four corner are provided with MS /fibre \"L\" angles of size 200mmx100mm and fitted with steel screws .The door to be hanged to the frame with the help of 100 mm S.S hinges and self tapping screws including all hardware fitting all complete as per thedirection of E.I.C.(FRP door shutter) |
| 136 | Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.a).Initial lift upto 1.5 mtr |
| 137 | b).From 1.50m to 3.00m depth |
| 138 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 139 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 140 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. a).In Foundation and Plinth in C:M (1:3) |
| 141 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 142 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 143 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 144 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a).12 mm thick C.P in CM (1:4) |
| 145 | b).20 mm thick C.P in CM (1:4) |
| 146 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 147 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C. |
| 148 | Supplying all labour, materials T&P and fixing of 2\" R.C.C.Baffle wall precast with C.C.(1;1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.M. Specification and direction of E.I.C |
| 149 | Supplying all materials, labour, T&P and providingpre-cast R.C.C.Manhole cover with C.C(1:1.5:3)12mm sizechipsincluding conveyance of all materials to work site, payment of royality, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 150 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 151 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded inP.C.C(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 152 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.(a).Inside size 250mmx250m |
| 153 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size 760mm x 760mm x 460mm |
| 154 | Addl depth 0.15 to 0.90 |
| 155 | Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class K.B brickwork in c.m(1:6) for the remaining height attop,12mmthick C.P (1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty .taxes etc.all complete as per approved drawing,specifcation and direction of E.I.C.1.40m dia.x 2.00m deep Soakway pit |
| 156 | Supplying all materials.labour.T&P and costructing soakway pit of the following sizes with pre cast R.C.C rings joined loose,gravel backing in the rear of well steining,precast R.C.C cover slab in c.c(1:2:4) using2mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works,watering,curing,conveyance of all materials to worksite,payment of royalty taxes etc.all complete as per approved drawing, specification and direction of E.I.C. 1.20mdia.x 2.10m deep |
| 157 | Supplying all labour.materials T&P and laying of U-PVCsoil waste pipe of the following internal diametre confirming to I.S.in trenches of the depth upto 1,2mtr including jointing with supply of approved rubber, lubricant by non - heat application method on beding with 150mm thick C.C.(1:3:6) using h.g. metal of 25mm to 40mm and then makingallround encasingincluding earth work excavation in all kinds of soil , refilling the trenches , watering, curring, conveyance of all materials to site , payment of royality , taxes etc. and testing all complete as per P.H. Specification and direction of Engineer in charge.100mm dia PVC pipe all round encasing. |
| 158 | (A).Sinking of 125mmX100/50mm dia. TubeWell by DTH MethodSupplying all material, labour, T&P for drilling aperfectly vertical bore hole of specified dia for a specified depth below ground level in hard rock stone, boulder etc by DTH Method drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and Plants and consumables etc. for lowering of finished bore suitable for lowering of 125mm dia GI/PVC pipes housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe as per direction of EIC. (As per letter no 349 dt 11.01.2022 of Engineer-in-Chief, RWSS (O)0 Mtr. to100 Mtr. |
| 159 | Supplying all labour, T&P & joining materials & lowering the PVC casing pipes, fittings & well screens in position including fitting fixing of centralizer, rubber packer, cutter plug & washing the bore as per direction of Engineer-in-Charge. a)125 mm dia ND PVCCasing pipe |
| 160 | Supplying all materials, labour, T&P cleaning and developing the tube well by compresser continuouslytill sand free clear water is obtained as per direction of E.I.C. |
| 161 | Supplying all materials, labour, T&P for IM II hand Pump set with 32mm dia GI riser pipes. |
| 162 | Supplying all labour T&P & materials for construction of tube well platform etc. all complete as per PH specification and direction jof Engineer-in-charge. |
| 163 | Supplying all labour T&P & materials for construction of Drain etc. all complete as per PH specification and direction jof Engineer-in-charge. |
| 164 | COST OF MATERIALS125mm ND PVC Casing Pipe ( Sch- 80 ) |
| 165 | Supply of I.S.I mark 1.00 HP single phase Vertical submersible pump set with discharge of 1800-2200 itr/hour and a head of 40-65 mtr of reputed make like KSB/TEXMO & eqivalent including all cost,conveyance and taxes etc.all complete as per direction of E.I.C. |
| 166 | Supply of all labour,T&P and fitting and fixing of 1.00 HP single phase vertical submersible pump set with includingcommissioning and testingetc.all complete as per direction of E.I.C. |
| 167 | Supplying,fitting and fixing of I.S.I mark D.O.L starter of reputed make like BCH or equivalent for1.00 HP single phase vertical submersible pump set includingall cost,conveyance and taxes etc.all complete as per direction of E.I.C. |
| 168 | Supplying,fitting and fixing of three core flat cable (1.5 mm2) of I.S.I marked of reputed make like BCH/Finolex or equivalent and connecting the pump and starterincluding all cost,conveyance and taxes etc.all complete as per direction of E.I.C. |
| 169 | Supplying,fitting and fixing of plastic rope, M.S. well cover, M.S. clamp,stainless steel short piece,bend & socket including all cost,conveyance and taxes etc.all complete as per direction of E.I.C. |
| 170 | Supplying,fitting and fixing of HDPE pipe and fittings &matching with the delivery size of pump and making connection to pumpset includingall cost,conveyance and taxes etc.all complete as per direction of E.I.C. |
| 171 | supplying of all materials ,labours,T&P and fitting&fixing of 5 K.V.A Voltage stabiliser having voltage range from 50 volt to 260volt sutable to run 1.00H.P sumersible pump set including electrial connection form the existing mains &with the controal panels of the pump set etc.all complete as per specification and direction of E.I.C |
| 172 | supplying of all materials ,labours,T&P and fitting&fixing of sencer for pump motor with all fittings all complete as per specification and direction of E.I.C |
| 173 | supplying of all materials ,labours,T&P and installation of Aquaguard Hot and cold RO+UV water purifier with standard accessories with all fittings all complete as per specification and direction of E.I.C |
