|
| 1 | R.C.C. work of M 30 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. Column Firstfloor |
| 2 | Second Floor |
| 3 | Roof BeamFirstfloor |
| 4 | Second Floor |
| 5 | Roof Slab Firstfloor |
| 6 | Second Floor |
| 7 | ChajjaFirstfloor |
| 8 | Second Floor |
| 9 | LintelFirstfloor |
| 10 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. etc. complete as per specification and direction of the Engineer-in-Charge. First Floor |
| 11 | Second Floor |
| 12 | Flyash Brick masonary in cement mortar (1:6) by using 10\" size Fly ash Bricks including all cost, conveyance etc. complete as per specification and direction of the Engineer-in-Charge. First Floor |
| 13 | Second Floor |
| 14 | Filling foundation and plinth with sand and wel watered &rammedetc . Complete including cost of sandetc complete as per the direction of the Engineer -in –charge. Ground Floor |
| 15 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete as per the direction of the Engineer -in –charge. GroundFloor |
| 16 | Providing,fitting,fixing of Gypsum Board ceiling including all fitting,cost of all materials,all taxes,labour, T&P etc.complete as per direction of the Engineer-in-charge. FirstFloor |
| 17 | 16mm thick cement plaster with cement mortar (1:6) etc complete including all cost and conveyance etc complete as per direction of EIC. FirstFloor |
| 18 | Second Floor |
| 19 | 12mm thick cement plaster (1:6) for brick work etc complete as per direction of EIC.. FirstFloor |
| 20 | Second Floor |
| 21 | 20 mm thick grading plaster in cement mortar (1:4) for RCC work including all cost and conveyance etc compete as per direction of EIC. FirstFloor |
| 22 | Second Floor |
| 23 | 6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping &including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. FirstFloor |
| 24 | Second Floor |
| 25 | Supplying, fitting and fixing of Vetrified tile in floor of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.(for New work only) GroundFloor |
| 26 | Second Floor |
| 27 | Supplying, fitting and fixing of Vetrified tile in dadoo of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.(for New work only) Ground Floor |
| 28 | Second Floor |
| 29 | Providing iron grill or window etc complete including all cost and conveyance as per direction of EIC.First Floor |
| 30 | Second Floor |
| 31 | Supplying , fitting,fixing up window (sliding type) made up aluminium section 151-154, 151-155, as windows frame section No.151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials all taxes labour, T&P etc. complete as per direction of the Engineer-in-charge. First Floor |
| 32 | Providing, fitting, fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and staineless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case asper approved design and specification,buffling polishing etc including all cost of labour, T&P, hire charges of of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge.First Floor |
| 33 | Providing, fitting, fixing of Tata Pravesh Doorincluding all cost of labour, T&P, hire charges of of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge. First Floor |
| 34 | Painting two coat with any approved paint including cost of primer etc. complete as per direction of Engineer-in-charge.GroundFloor |
| 35 | First Floor |
| 36 | Second Floor |
| 37 | Finishing wall suface of walls with Acrylic wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes. Labour T & P etc complete in all respect as per direction of the Engineer in charge .Ground Floor |
| 38 | First Floor |
| 39 | SecondFloor |
| 40 | Weather coat two coats over one primer coat to walls of approved shade on new work to give an even shade including cost of weather coat etc.complete as per the instruction of Engineer-in-Charge . Ground Floor |
| 41 | First Floor |
| 42 | SecondFloor |
| 43 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade over a coat of oil bound cement primer including cost of distemrer & prime etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 44 | First Floor |
| 45 | SecondFloor |
| 46 | EI Work: PART- A ( Internal Electrification)Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )Group A |
| 47 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group B |
| 48 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group C |
| 49 | Recessed wiring to Fan Point in...Group B |
| 50 | Recessed wiring to Fan Point in... Group C |
| 51 | Swich Boards S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 52 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 53 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 54 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 55 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover. |
| 56 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection |
| 57 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover |
| 58 | 4 Modular box with base & cover |
| 59 | 6 Modular box with base & cover |
| 60 | 12 Modular box with base & cover |
| 61 | Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard). 2x1.5+1x1.5 (1.8.1) |
| 62 | 2x2.5+1x1.5 (1.8.2) |
| 63 | 2x4+1x1.5 (1.8.3) |
| 64 | 2x6+1x2.5 (1.8.4) |
| 65 | 4x4+2x2.5(1:8:9) |
| 66 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 67 | Circuit Breakers S/F of \"B/C/D\" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 68 | S/F of \"B/C/D\" series FP MCB of 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required Four pole (FP) (2.5.5) |
| 69 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.). S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) |
| 70 | Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) .S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 71 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 72 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 73 | FittingsS/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 74 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-HS/Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS ) |
| 75 | S/F step type modular fan regulator |
| 76 | Supply & Fixing of 45-48 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 77 | PART-B(Upgradation to Smart Class Room) Supply and installation of Interactive Display with OPS - 75\" Automatic Data Processing Interactive Unit, 4K UHD Interactive Display with Built-In Android 11 OS,32 GB Memory,8GB RAM and recognizes up to 20 Unique Points of touch sensitive as well as Pen drive and OPS:- i5 Processor, 8GB RAM, 256 GB SSD, Windows 11 IoT (GAC). Make:LG/Samsung |
| 78 | Interactive Board Back Panel with Cabinet and sliding Green-White Board (15’ x 7’10”) |
| 79 | PART-C(Sound System)Supply and Fixing of One-Way C ompact PA Wall Speakers Make: Ahuja/Bosch/Sennheiser |
| 80 | Supply and Fixing of Conference System Chairman Unit Make: Ahuja/Bosch/Sennheiser |
| 81 | Supply and Fixing of PA Mixer Amplifiers with Digital Player200 WATTS Make: Ahuja/Bosch/Sennheiser |
| 82 | PH Work: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor C-PVC pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. a).20mm dia C-PVC pipes |
| 83 | b).25mm dia C- PVC pipes |
| 84 | b).32mm dia C- PVC pipes |
| 85 | supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.G.F |
| 86 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.(Jaguar Make) a).15mm dia CP Bib Cock (Short Body) |
| 87 | b)15mm dia CP Bib Cock (Long Body) |
| 88 | c).15mm dia CP Angle Stop Cock |
| 89 | d).15mm dia CP Pillar Cock |
| 90 | e).15mm dia.C.P conceled stopcock |
| 91 | f).15mm dia CP Push Cock |
| 92 | g).CP Flange |
| 93 | h).CP Extention Piece |
| 94 | i).25mm dia GM fullwayValve |
| 95 | j).32mm dia GM fullwayValve |
| 96 | k) health fuccet |
| 97 | l) 2in 1 Bib cock |
| 98 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C 15 mm dia C.P Shower with arm (Jaguar make) |
| 99 | Supplying all material, labour, T&P and providing and fixing P.V.C water storage tank including cutting holes through the tank and fixing MS tubes and fitting and providing extra socket and jam nuts fixing ball valves etc. Including hoisting and placing the tank to the required position and including hoisting, laying, watering, curing, conveyance of all materials to worksite ,payment of royalty ,taxes etc. complete as per specification and direction of E.I.C. (Make: Sintex / Supreme / Oriplast / Hariplast). 2000 lits capacity on the roof of Second Floor |
| 100 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 lits capacity on the roof of secondfloor |
| 101 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm diameter U-PVCpipes |
| 102 | b).110mm U-PVC P-trap |
| 103 | c).110mm U-PVCsingle junction door |
| 104 | e).110mm U-PVCdoor bend |
| 105 | f).110mm U-PVCOffset |
| 106 | g).110mm U-PVCplain bend |
| 107 | h).110mm U-PVCvent cowl |
| 108 | i).125 mm dia C.P Grating |
| 109 | j).75mm diameter U-PVCpipes |
| 110 | k).75mm PVCBend |
| 111 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. a).375 mm thick wall |
| 112 | b).250 mm thick wall |
| 113 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrestetc all complete as per specification and direction of the E.I.C.(Parryware / Hindware /Cera / Neycer) .a).580mm size Orissa pan |
| 114 | b).580mm size EWC with P & S trap with seat cover |
| 115 | c) Flat back lipped wall Urinal (medium) with spreder |
| 116 | d) Partion wall for Urinal |
| 117 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. a).10 lit PVC L/L Cistern |
| 118 | Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.a).560mmx455mm Counter top basin (Parryware / Neycer/ Hindware/Cera) |
| 119 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size B.E Mirror (fixed type) |
| 120 | Supplying all materials,labour, T&P and fixing standard sized CP towel ring/rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. CP towel ring |
| 121 | 20mmx600mm long CP towel rail |
| 122 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. 3 x 3.50 x 4.75 =49,87 |
| 123 | Supplying all materials, labour, T&P and fixing granite in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 124 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. GF3x 2 x (3.50 + 4.75) x 2.00 = 99.60 |
| 125 | Supplying all materials,labour,T&P and fixing standard size shelf with C.P. brass brackets& guard rails complete fixed to woodenplugs with C.P.screws as per specification and direction ofE.I.C. |
| 126 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. CP soap holder |
| 127 | Supplying all labour,materialsT&P and fitting , fixing of door frame made of FRP. profilesof size40mmx48mm.The vertical profiles joined to the horizontal after inserting MS/Fiber\"L\" angles of size 200mmx100mm and self tapping screws.A one meter run reinforcement provided along the sheet of the frame where the door is to be hanged.It is to be fixed to the walls with steelsecews and rawal plugs all complete as per thedirection of E.I.C. (FRP door frame) |
| 128 | Supplying all labour,materialsT&P and fitting , fixing of FRP door shutter to be made up of selective FRP. profiles .The styles and rails are made up of section measuring 24 mm x 59 mm.A lock rail each provided horizontallyat the required place for strength and firmness measuring 24mmx100 mm.The panel are provided of size measuring 200mmx20mm .All the four corner are provided with MS /fibre \"L\" angles of size 200mmx100mm and fitted with steel screws .The door to be hanged to the frame with the help of 100 mm S.S hinges and self tapping screws including all hardware fitting all complete as per thedirection of E.I.C.(FRP door shutter) |
| 129 | Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.a).Initial lift upto 1.5 mtr 3.95 m x 3.45 m x 1.50 m=20.44 |
| 130 | b).From 1.50m to 3.00m depth3.95 m x 3.45 m x 1.00 m=13.63 |
| 131 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. 3.95 m x 3.45 m x 0.30 m=4.09 |
| 132 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 3.95 m x 3.45 m x 0.15 m=1.43 |
| 133 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. a).In Foundation and Plinth in C:M (1:3) 2 x 3.00 x 0.60 x 0.45 = 1.62 |
| 134 | b).In Foundation and Plinth in C:M (1:4)2 x (2.50+0.90) x 0.25 x 0.80 = 1.36 |
| 135 | Superstructure3 x 0.60 x 0.125 x 1.80 = 0.3375 |
| 136 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1 x 3.05 x 2.55 x 0.15 = 1.167 |
| 137 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1x1.20x1.20=1.44 |
| 138 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 139 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a).12 mm thick C.P in CM (1:3) 2 x ( 2.00 + 0.90 ) m x 1.90 m =11.02sqm |
| 140 | b).12 mm thick C.P in CM (1:4) 4.60 x 2.40 = 11.04 |
| 141 | b).20 mm thick C.P in CM (1:4) 2(3.05+2.25)2.15= 24.08 |
| 142 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 143 | 20mm CP 1:3 |
| 144 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C. |
| 145 | Supplying all labour, materials T&P and fixing of 2\" R.C.C.Baffle wall precast with C.C.(1;1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.M. Specification and direction of E.I.C 1.15 x 0.45 = 0.517 |
| 146 | Supplying all materials, labour, T&P and providingpre-cast R.C.C.Manhole cover with C.C(1:1.5:3)12mm sizechipsincluding conveyance of all materials to work site, payment of royality, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 147 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 148 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded inP.C.C(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 149 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.(a).Inside size 250mmx250m |
| 150 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size 760mm x 760mm x 460mm |
| 151 | Addl depth 0.15 to 0.90 |
| 152 | Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class K.B brickwork in c.m(1:6) for the remaining height attop,12mmthick C.P (1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty .taxes etc.all complete as per approved drawing,specifcation and direction of E.I.C.1.40m dia.x 2.00m deep Soakway pit |
| 153 | 1.20m dia.x 2.00m deep Soakway pit |
| 154 | Supplying all materials.labour.T&P and costructing soakway pit of the following sizes with pre cast R.C.C rings joined loose,gravel backing in the rear of well steining,precast R.C.C cover slab in c.c(1:2:4) using2mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works,watering,curing,conveyance of all materials to worksite,payment of royalty taxes etc.all complete as per approved drawing, specification and direction of E.I.C. 1.20mdia.x 2.10m deep |
| 155 | Supplying all labour.materials T&P and laying of U-PVCsoil waste pipe of the following internal diametre confirming to I.S.in trenches of the depth upto 1,2mtr including jointing with supply of approved rubber, lubricant by non - heat application method on beding with 150mm thick C.C.(1:3:6) using h.g. metal of 25mm to 40mm and then makingallround encasingincluding earth work excavation in all kinds of soil , refilling the trenches , watering, curring, conveyance of all materials to site , payment of royality , taxes etc. and testing all complete as per P.H. Specification and direction of Engineer in charge.100mm dia PVC pipe all round encasing. |
| 156 | supplying of all materials ,labours,T&P and installation of Aquaguard Hot and cold RO+UV water purifier with standard accessories with all fittings all complete as per specification and direction of E.I.C |
| 157 | supplying of all materials ,labours,T&P for fixing and fitting of MSdoor all complete as per specification and direction of E.I.C |
