|
| 1 | Computer CPU Repairing with Complete Programming with ABB Software SCADA |
| 2 | ABB PLC CPU for Additional Signals Memory 2MB with Programming |
| 3 | Analog Input/Output Card ABB |
| 4 | Mill No-2 chest Pressure Transmeter with Integration of existing DCS system Communication Modbus |
| 5 | Temperature sensor (Thermocouple) with Transmitter (HART) Probe Length-1000mm |
| 6 | Feed Water Control Valve (4 Inch) Of HP Blr. 45 kg/cm2 with smart Positioner & Integration with existing system, Installation & Commissioning |
| 7 | Temperature sensor (Thermocouple) with Transmitter (HART) Probe Length-300mm 04 Nos with Temperature Indication (Retransmission output 4 to 20 MA) panel complete panel with MCB, Terminal Blocks and SMPS-5A, Integration with existing DCS system of boiling House |
| 8 | SMPS-5 Amp |
| 9 | Single Channel Isolator |
| 10 | Dual channel; Isolator |
| 11 | Teflon Tape |
| 12 | PU tube OD-8mm |
| 13 | RPM Indicator (RC-100) |
| 14 | RPM Sensor (PNP) supply 5-40 VDC Load current-400 MA |
| 15 | Digital RPM Indicator with Sensor range-(0-9999) with cable |
| 16 | Temperature gauge (0-120 0C) S.S-316, 6\" dial, 1/2\" BSP, length-300mm (make-Forbe marshall/Waree) |
| 17 | Temperature gauge (0-500 0C) S.S-316, 6\" dial, 1/2\" BSP, length-300mm (make-Forbe marshall/Waree) |
| 18 | Spring coupling for Techo, Generator |
| 19 | Beacon make RPM Indicator model-AT-96, Sr.no.-31684 range-0-8000 RPM, FSD-3680 RPM BL-6500 RPM, AT TG-2990 RPM |
| 20 | Beacon make techo Generator model-TG-RN, Sr no.-45254 O/P:1VAC-100 RPM |
| 21 | Dial Guage- Dial dia-29-30mm |
| 22 | Scale internal minimal display-0.01mm Measuring Range-0.5mm, Minimum display-0.01 |
| 23 | Stainless Steel shim Thickness-0.01 mm, width-500mm length-1600mm |
| 24 | S.S. shim Thickness-0.1mm, width-500mm, length-1600mm |
| 25 | S.S. shim Thickness-0.2mm, width-500mm, length-1600mm |
| 26 | S.S. shim Thickness-0.5mm, width-500mm, length-1600mm |
