Military Engineer Services-MES has published Tender For Additional / Alternator To Certain Buildings At Vayuvihar Under Ge ( Af ) Trivandrum.. Submission Date for this Tender is 04-12-2023. Building Work Tenders in trivandrum Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. |
| 2 | Returning filling in, inlcuding spreading, levelling, watering and well ramming in layers not exc 25cm thick of hard/dense soil complete all as specified and directed. |
| 3 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 4 | Material and labourfor PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation bed concrete all as specified and directed. |
| 5 | Material and labourfor Walling of random rubble, uncoursedwell bonded, bedded and solidly hearted, built in CM 1:6 all as specified and asdirected |
| 6 | Material and labourprecast cement concrete block masonry with solid blocks exc 10cm in width, built in cement mortar 1:3;6 using 20 mm graded aggregate incm 1:6 all as specified and asdirected |
| 7 | Material and labour10 mm thick rendering in CM 1:6 on concrete block masonry surfaces including finishing the surfaces even and smooth with using extra cementall as specified and directed. |
| 8 | Material and labour15 mm thick rendering in CM 1:4 onconcrete block masonry surfaces surfaces including finishing the surfaces even and smooth with using extra cement all as specified and directed. |
| 9 | Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified and directed. |
| 10 | Material and labourfor Pre painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 11 | Material and labour Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 12 | Material and labourpreparation of new steel surfaces of any description over 10 cm in width or girth not otherwise describedand applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 13 | Material and labourfor Hardcore using broken stones or boulders of gauge n exc 63 mm, deposited, spread & levelled in layers n exc 15 cm thick, watered & rammed to a true surfaceall as specified and directed. |
| 14 | Material and labourfor 75mm thick Cement concrete type C-2, 1:3:6(40mm graded aggregate), finished even and smooth without using extra cement |
| 15 | Material and labourfor 75mm thick Cement concrete type D-2, 1:4:8(40mm graded aggregate) as sub base to floor |
| 16 | Material and labourfor 40mm Cement concrete type B-1, 1:2:4 (20mm graded aggregate),finished even and smooth with using extra cement |
| 17 | Material and labourfor Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 18 | Material and labourfor Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 19 | Material and labourfor mild steel TMT bars 10 mm dia and over cut to length or bent to shape required cranking, bending spirally for hooping for columns, hooking ends and binding with and incluidng mild steel wire (anealed) not less than 0.9 mm dia or securing with clips quality confirming complete all as specified and directed. |
| 20 | All as per item No 19 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersall as specified and directed. |
| 21 | Material and labourfor RCC 1:2:4 type B-1(20mm graded aggregate),as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 22 | Material and labourfor RCC 1:2:4 type B-1 (20mm graded aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeall as specified and directed. |
| 23 | Material and labourfor 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 24 | Supply and fix Anodised aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling all as specified |
| 25 | Material and labourfor Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions |
| 26 | Material and labourrendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 including finishing the surfaces even and smooth (without using extra cement) with water proofing compound (sunken portion) complete all as specified and directed by Engineer in charge. |
| 27 | Material and labourforwater proofing treatment on horizontal or vertical surface with provision of oil bound bitumen primer @ 0.20kg per sqm and applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm and providing 4mm thk APP modified water proofing membrane weighing not less than 4 kg/sqm ,reinforced with non voven polyester matt weighing not less than 160 gm / sqm as per detailed specifications and as directed. |
| 28 | Material and labourfor precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed. |
| 29 | Surface excvation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil |
| 30 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. |
| 31 | Material and labourfor Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 32 | Material and labourfor 75mm thick Cement concretetype C-2, 1:3:6(40mm graded aggregate) as sub base to floor complete all as specified and directed. |
| 33 | Material and labourfor screed bed or bedding layer of cement mortar 1:6, 20 mm thick for laying floor finishes complete all as specified and directed. |
| 34 | Material and labourfor Chequeredcement concrete tiles 300X300X 20 mm thick,set & jointed and pointed in neat cement slurry in floors with grey cement and no pigments. |
| 35 | Material and labourfor granular metal/ stone chips 6.6 to 12.5mm size, spread, rolled and consolidated to gradient and camber required, 50mm thick as bas for interlocking tiles complete all as specified and directed. |
| 36 | Material and labourforMachine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 50 to60mm thickness, M-35 Grade With grey cement and no pigments complete all as specified and directed. |
| 37 | Material and labourfor Providing, cement concrete 1:2:4 as in benching or kerbs or mud stops, rounded or chamfered on edges, Ramp etc including necessary form work complete all as specified and directed. |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 39 | Taking down chowkats or frameswithout taking off shutter from the from not exc 1.5 sqmeachremoving to or from storeall as directed. |
| 40 | Taking down chowkats or frameswithout taking off shutter from the from exc 1.5 sqmbut not exc 4.00 Sqm eachremoving to or from storeall as directed. |
| 41 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store . |
| 42 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store . |
| 43 | Demolition and concrete in ground floors and lpavings n exc 15 cm thickness (below or above ground level) |
| 44 | Supply and fix joint free colouredNon skid ceramic tiles 7 t0 8mm thk (square /Rectangular ) area of each tile exc 0.18 sqm and n.exc 0.38 sqm ,in floors etcset and jointed in neat cement slurry and pointed with white cement or pigment to match with the shade of the tilesall as specified and as directed |
| 45 | Material and labourfor 25mm thick PCC 1:2:4, type B-0(12.50mm graded aggregate) as padding to floor. |
| 46 | Material and labourfor Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 47 | Material and labourScreed bed or bedding layerin cement mortar 1:4, 15mm thick for laying floor finishes |
| 48 | Material and labourfor coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match skirting/dado. |
| 49 | M&L10 mm thick plastering in cement mortar 1:4 as backing coat for receiving finishes as skirting /dado complete all as specified and directed. |
| 50 | Supply and fix powder coated anodized aluminium frame for window, door,ventilatorswith one or more rebates including joining cleats for fixing etc complete all as specified. |
| 51 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of"zinc alloyed (white powder coated), ransmission gear made of mild steel with multi point locking system] and 5.5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Note: Net opening will be measured for payment purpose.) Area exceeding 1.00 sqm but not exceeding 2.00 sqm each |
| 52 | All item No 51 above, but Area not exceeding 1.00 sqm each |
| 53 | Supply and fix Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 54 | Supply and fix powder coated anodized aluminium grill suitable for ventilators |
| 55 | Supply and fix 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane and sheet glass is ground or obscured or frosted, on one side |
| 56 | Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane and sheet glass is ground or obscured or frosted, on one side |
| 57 | Material and labourSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 58 | Supply and fix Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing |
| 59 | Supply and fix Butt hinges medium weight100 mm long complete all as specified and directed. |
| 60 | Supply and fix 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 61 | Supply and fix 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 62 | Supply and fix 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 63 | Supply and fix unplasticised PVC pipes 25 mm dia of prerssure rating 10 kgf/sqcm fixed complete to wall, ceiling or in floors any type of pipe |
| 64 | Supply and fix 20 mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 65 | Supply and fix in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe |
| 66 | Supply and fix in repairs Vitreous chinawash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer in charge. |
| 67 | Supply and fixVitreous chinawash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer in charge. |
| 68 | Supply only white colour plastic water closetseat cover,closed pattern with flat bottom and coner and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer in charge. Note fixing charge included in Item No 66 & 67 above. |
| 69 | Supply onlyflushing cistern 10 ltrs capacity PVC valveless,syphonic action type, low level with inlet, ball valve ,float including bracket complete all as specified and directed by Engineer in charge.Note fixing charge included in Item No 66 and 67 above. |
| 70 | Supply and fix in repairs Wash Basin, Vitreous China (flat back or angle back type) of size 550x400mm , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engineer in charge. |
| 71 | Supply and fixWash Basin, Vitreous China (flat back or angle back type) of size 550x400mm , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engineer in charge. |
| 72 | Supply and fix PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed by Engineer in charge. |
| 73 | S & FVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 74 | Supply and fix in repairs 15 mm bore fancy type pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. |
| 75 | Supply and fix health faucet with CP flexible arm 15 mm bore of pipe complete all as specified and directed by Engineer in charge. |
| 76 | Supply and fix in repairs Angle stop valvecast copper alloy fancy type 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends suitable for PVC pipe or for unions complete all as specified and directed by Engineer in charge. |
| 77 | Supply and fix in repairs 15 mm bore Bib tap cast copper alloy CP , fancy type chromium plated complete fixed to PPR pipes all as specified and directed by Engineer in charge. |
| 78 | Supply and fix in repairs 20mm dia towel railCP60 cm long between flanges fitted to wall with CP screw all as specified. |
| 79 | Supply and fix in repairs PVC connection 15 mm dia 450 mm long with check nut at both side all as specified. |
| 80 | Supply and fix in repairs looking mirror 600x450 mm size fixed with aluminium frame with 6mm ply wood/black board/AC building board fixed with screw fixed repairs complete all as specified and directed by Engineer in charge. |
| 81 | Demolition and breaking up drain pipes (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar100 mm internal dia of pipe complete all as specified and directed by Engineer in charge. |
| 82 | Demolition and breaking up drain pipes (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar 75 mm internal dia of pipe complete all as specified and directed by Engineer in charge. |
| 83 | Demolition and breaking up drain pipes (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar 50 mm internal dia of pipe complete all as specified and directed by Engineer in charge. |
| 84 | Supply and fix 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engineer in charge. |
| 85 | Supply and fix 50mm bore PVC (SWR) Soil, waste/rain waterand vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engineer in charge. |
| 86 | Supply and fix 110 mm bore PVC (SWR) Soil, waste/rain waterand vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engineer in charge. |
| 87 | Supply and fixPVC (SWR) bends 110mm diaany radius complete all as specified and directed by Engineer in charge. |
| 88 | Supply and fix PVC (SWR) vent cowl 110 mm complete all as specified and directed by Engineer in charge. |
| 89 | Supply and fix PVC (SWR) junction single, (single T equal or unequal) 110mm bore complete all as specified and directed by Engineer in charge. |
| 90 | Supply and fixPVC (SWR) bends 75mm diaany radius complete all as specified and directed by Engineer in charge. |
| 91 | Material and labourfor 12mm th Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed by Engineer in charge. |
| 92 | Supply and fix rotational moulded plolythene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position all as specified in repairs 1000 ltrs capacity including dismantling old water tank and removing to store. |
| 93 | Supply and fix 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe |
| 94 | Supply and fix 20 mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer in charge. |
| 95 | Material and labourfor Glass dividing strips, 3mm thick and 38mmwidth of strip inserted in position, conform to design complete all as specified and directed by Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
