|
| 1 | AGE B/R SCHEDUEL PART-IDismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover filletscomplete all as specified and directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 3 | All as per item No 2 above but n.exc 1.5 sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 5 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground lever) complete all as specified and as directed. |
| 6 | Dismantlingboarding ,aluminium partitions any description fixed in any position with nails etc complete all as specified and directed. |
| 7 | Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 8 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick as in roof coveringof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 9 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in roof coveringof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 10 | S&F20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nailscomplete all as specified. |
| 11 | M&L Preparation surface of wood and wood based material new or old of any description and girth and treated with two coats of creosote oil complete , |
| 12 | S&F Anodised Aluminiumframe work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed . |
| 13 | M&L for 4mm E boards 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 15 | M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM(1:6). complete all as specified and directed. |
| 16 | M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7mm/300x600x7mm thick setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour over 10mm thick backing coatin CM 1:4 complete as specified and directed |
| 17 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 18 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in CM 1:4 complete all as specified and as directed |
| 19 | M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed |
| 20 | M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed |
| 21 | M&L 25 mm thick PCC 1:2:4 type B1 (20 mm graded aggregtae) as in sub floors and simmilar wok complete all as specified and as directed. |
| 22 | M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in path,plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed |
| 23 | M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counterfixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 24 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete |
| 25 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 26 | S&F powder coated(powder coating min 50 micron)anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 27 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 28 | M&L 12mm thick prelaminated particle board, interior gradeprelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified and directed. |
| 29 | S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed |
| 30 | M&L for solar control film/film with geometric design 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 31 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed. |
| 32 | S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete |
| 33 | S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed |
| 34 | M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed. |
| 35 | S&F 0.90 mm thickdecorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified |
| 36 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 37 | M/L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pan. |
| 38 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed |
| 39 | M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in cabinet / cup-board completed all as specified and directed. |
| 40 | S&FContinuous (Piano) hinges, mild steel , bright finish or electrogalvanised , width of flaps 30 mm (when open) complete all as specified and directed. |
| 41 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed |
| 42 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete |
| 43 | S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing. |
| 44 | S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 45 | S&F Butt hinges of 75mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 46 | S&F Extruded Aluminium, anodised, handles of size 150mm complete all as specified and directed. |
| 47 | S&F Extruded Aluminium, anodised, handles of size 100mm complete all as specified and directed. |
| 48 | S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed. |
| 49 | S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed. |
| 50 | S&F 300mm long aliminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts ans sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 51 | S&F extruded fancy type Brass handles fabricated type of size 100 mm complete |
| 52 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 53 | S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor complete all as specified and directed. |
| 54 | S&F in repair PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe complete all as specified and directed. |
| 55 | S&F in repair PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed. |
| 56 | S&F in repair PVC (SWR) bends, any radius, 75 mm bore complete all as specified and directed. |
| 57 | S&Fin repair 75mm dia PVC (SWR) floor trap with CP grating, including jointing to pipe complete all as specified and directed. |
| 58 | S&F in repair brass body CP Tubular towel rail 20mm dia 450mm long complete all as specified and directed.. |
| 59 | Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified and directed. |
| 60 | Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed. |
| 61 | S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed. |
| 62 | S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 63 | S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, fancy type, 32mm dia Brass Chromium Plated Waste Fitting and PVC connection pipe of 15mm x 600mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed .Make:- Prayag /Hindware/Cera |
| 64 | S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 65 | S&F in repair Water closet Pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chroimum plated or aluminised hinging device complete all as specified and directed. |
| 66 | S&F in repair Vitreous china squatting pan, \"Orissa\" pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cisterncomplete all as specified and directed. |
| 67 | S&F in repair PVC valveless, syphonic action type flushing cistern,low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including bracketscomplete all as specified and directed. |
| 68 | S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed. |
| 69 | S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed. |
| 70 | S&F Swivel shower chromium plated with shower arm 15mm size, 195mm long with bend of 45degree with flange for fixing with 15mm pipe complete all as specified. |
| 71 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mmcomplete all as specified and directed. |
| 72 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete |
| 74 | S&F in repair 15mm bore brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed (Make Prayag or equivalent) |
| 75 | S&F Stainless steel kitchen plate rack of size 36\" X 36\" X 10\" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack (Make : Blue star, Cat No - BSKPR-314 or equivalent) |
| 76 | S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhead shower complete with 115mm long bend pipe connecting legs & wall flange (without hand & over head shower) complete all as specified and directed of make Jaquar cat part No : OPP-15125PM) |
| 77 | S&F in repair towel ring square shape stainless steel fixed in position, making good surface complete all as specified and directed of Make Jaquar Cat Part No: CAN-1121N ) |
| 78 | S&F in repair corner glass shelf with bracket fixed in position making good surface complete all as specified and directed of make Jaquar Cat Part No : CAN-1173) |
| 79 | S&F in repair 25mm dia aluminium drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends (minimum) in one opening complete all as specified and directed. |
| 80 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 81 | M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed. |
| 82 | M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed. |
| 83 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 84 | S&F in repairsGun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 85 | S&Frotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed. |
| 86 | S&F in repair ball valve of size 20mm, high pressure, with polyethene float and fly nut, screwed for iron pipe complete all as specified and directed. |
| 87 | Demolition of precast concrete block walling built in cement mortar complete all as specified and directed. |
| 88 | M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 89 | M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking jointsand setting in CM 1:4 complete all as specified and directed. |
| 90 | M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed. |
| 91 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends |
| 92 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered). |
| 93 | M&L for rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete. |
| 94 | M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement stone masonry surfaces or surface other than fair face of brick-work or on other side of lathing using water proofing compound @ 3% complete. |
| 95 | Supply only for water proofing compound. |
| 96 | M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete. |
| 97 | Complete removal of existing treatment on old wall surfaces and applyingtwo finishing coat of oil bound distempering over 1mm of wall care putty complete. |
| 98 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 99 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 100 | M&L for waterproof cement based exterior wall putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step3) Allow 6-8 hrs time to dry the putty surface. Note : (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(b) Cost of scafolding upto 10m hight of building is included in this item.(c.)The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d)Masking of window/doors during spray painting using polythine film will be included. (e) Cleaning and clearing site of paint, mats etc. included. (f) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. |
| 101 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied)(b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(c) Cost of scafolding upto 10m hight of building is included in this item.(d.)The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (e) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. |
| 102 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed |
| 103 | Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 104 | S&F High density polyethylene pipes (HDPE \"B\" grade) 160mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed. |
| 105 | M&L for Concrete bed to160mm drain pipesincluding packing under and completely surrounding pipes with concrete after they are laid and tested; in ® |
| 106 | Dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and directed. |
| 107 | Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position complete all as specified and directed. |
| 108 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 109 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 110 | M&L forpreparation of new steel surfaces of any description ,over 10 cm in width or girth,not otherwise described and applyingtwo coat of synthetic enamel paint over a coat red oxide primer all as specified. |
| 111 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete. |
| 112 | Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point |
| 113 | Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil |
| 114 | M&L Hardcore broken stone boulders gauge n exc 63mm, deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface. |
| 115 | M&L 100mmthick cement concreteusing (40mm graded aggregate) type D-2 (1:4:8)as in sub base. |
| 116 | M & L 75mm thick PCC 1:2:4 type B2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 117 | M&L for construction of RCC septic tank for 25 users capacity, with and including necessary excavation, earth work, brick work, concrete work, plastering, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No.CESZ/2019/STD-1 & specification (without sluice valve and sludge chamber) complete all as specified and directed. |
| 118 | M&L for construction of soak well 1.8 mtr dia and 3 mtr effiective depth with and including necessary excavation, earth work, brick work, plastering, filling with brick bats, PCC on top, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No.78 specification complete all as specified and directed. |
| 119 | Materialo and Labour for PVC pipes 180mm half round fixed as valley gutter pipe at roof level and walls including joint bracket, running outlet, elbow, stop end stop end outlet, support brackets fixing at 1mtr distance each complete all as specified and directed by Engineer-in-charge. |
| 120 | AGE E/M SCHEDUEL PART-IITaking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. |
| 121 | Material and labour point wiring for one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including suitable size PVC conduit and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed. |
| 122 | All as per item No.121above but One 3 pin 5 Amps socket out let points on independent board |
| 123 | All as per item No.121above but5 Amp socket on same boardwith other switches. |
| 124 | All as per item No.121above butOne call Bell point controlled by one bell Push on independent Board |
| 125 | Material and labour point wiring for power point controlled by one, one wayswitch using2.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm width or higher size PVCconduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed. |
| 126 | Supply and fixing submain wiring for DBs/ Power Point,two single core ,4 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including suitable sizePVC conduit (ISI marked) including 4 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earthwireincluding taking down old unserviceable onecomplete all as specified. |
| 127 | Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified. |
| 128 | Supply and fix switch socket combination 2 in 1 multipurpose5 pin , (6 Amps ) flush typecontrolled by one switch complete all as specified. |
| 129 | Supply and fix socketoutlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only) |
| 130 | Supply and fix switch socket combination5 in 1 , 6 pin , (5/16 Amps ) flush typecontrolled by one switch complete all as specified. |
| 131 | Supply & fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified. |
| 132 | Supply and fix Bell push, flush type, 5 amp complete all as specified. |
| 133 | Supply and fix Buzzer, Ding Dong AC. 230 volts, single pole all as directed |
| 134 | Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. |
| 135 | Supply and fix 18 W LED light fitting wall mounted batten 4\"ft ,extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. |
| 136 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 137 | Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified. |
| 138 | Supply and fix Vertical distribution board double door MCB TPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps MCB as incomer with Bus bars, Neutral links complete with all accessories including taking down old unserviceable one complete all as directed. |
| 139 | Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contactincluding taking down old unserviceable one complete all as directed. |
| 140 | Supply and fixMCB SP,6 to 32 Amps, \"C\" series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. |
| 141 | Supply and fix MCB SPN 40 - 63 Amps,\"C\" series 10kA, 240 Volts and to be housed in DBscomplete including necessry connectionall as specified and directed. |
| 142 | Supply and fix MCB TPN 63 Amps,\"C\" series 10kA, 240 Volts and to be housed in DBscomplete including necessry connectionall as specified and directed. |
| 143 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed |
| 144 | Supply and fix 20 Amps SPN MCB metallic Plug and socket sheet metal enclosure complete all as specified and as directed |
| 145 | Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated complete all as specified and as directed |
| 146 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed |
| 147 | Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and as directed. |
| 148 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed. |
| 149 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 150 | Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured). |
| 151 | M&LFly Ashcompact modular bricks locally availableof size 23 x 11 x 7cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed |
| 152 | M&L 40 mm bore steel for tubing light grade ISI marked for protection of cable including necessary joint complete all as specified and as directed. (Make TATA/JINDAL/BANSAL). |
| 153 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased inand including 40 mm dia GI \"lightgrade\" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe \"light grade\" as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SSR Part I completeall as specified and directed and testing on completion. |
