Public Health Engineering Department-PHED has published Tender For Facelifting And Interior Furishing Works For Junior Engineer Room-1 And Dpmu Room Under Jalpaiguri Division, Phe Dte.. Submission Date for this Tender is 04-12-2023. Building Work Tenders in jalpaiguri West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 3) Mazdoor (Male) |
| 2 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per approval and direction of Engineer-in-charge.[ excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor |
| 3 | i) 6 mm thickness |
| 4 | ii) 12 mm thickness |
| 5 | iii) 19 mm thickness |
| 6 | Supplying, fitting and fixing boiling water block board conforming to IS:1659-1990 conforming to IS: 848-1974of approved make and brand fitted and fixed as per design as per direction of Engineer-in-charge.[ excluding the cost of supporting frame workand teak wood batten/Lipping] In Ground Floor iii) 25 mm thickness |
| 7 | Wall panelling / partition with Melamine faced 3 layered flat pressed woodparticle board of approved make and brandas per direction of Engineer -in-charge of requisite grade bonded with phenol formaldehyde syntheticresinconforming to IS: 848-1974 [ excluding the cost of supporting frame work and teak wood battens/Lipping] i) One side decorative laminated (b) Interior Grade 12 mm thick |
| 8 | Supplying fitting , fixing decorative lamination conforming to IS : 2046 : 1995 as per approved make, brand, finish and thickness with fitting , fixing the same on Particle / MDF /Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as oer direction of Engineer-in-charge . The rate includes the cost of labour , adhesive and all incidental charges thereof. In ground floor. Glossy/Matt/Suede excluding surface texture or metallic Iustre.(i) Thickness of laminate 1.5mm |
| 9 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.vii) 8 mm thick clear glass |
| 10 | PWD BUILDING SCHEDULE (Item No-12, Page No 124) Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the doorof soild core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formldehyde as glue etc. Complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings in ground floor : (a) 35mm thick shutters ( single leaf) |
| 11 | 23 i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (a) Heavy type( I.S.I. size 3) |
| 12 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(a) 250mm long |
| 13 | Iron pad bolt (lock ) of approved quality rod and handle single cast: (ii) 200mm * 16mm dia rod 105 mm * 3 mm plate. |
| 14 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark . (viii) 100mm. * 75 mm. * 3.50mm. |
| 15 | (i) Door stopper.(Brass) |
| 16 | Supplying , fitting and fixing Godrej Multi Lock or equivallent. |
| 17 | Anodised aluinium barrel / tower / socket bolt ( full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws :(*) 300mm long * 12 mm dia. bolt. |
| 18 | Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete . (ii) 225 mm grip * 16 mm dia rod * 38 mm plate * 3.2 mm thick. |
| 19 | (iii) 300 mm grip * 20 mm dia rod * 50 mm plate * 3.2 mm thick. |
| 20 | (b) Supplying " Godrej " mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 21 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc . Including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white ) |
| 22 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | Supplying and fixing PVC casing-capping[ Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works.(B) 25 * 10 mm Size |
| 24 | Distn. Wiring in 22/0.3 (1.5 sqmm) singlecore stranded"FR"PVC insulated & unsheathed single core stranded copper wire ( Brand approved by EIC ) in 19 mm bore, 3mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S & F 240 V 5A3 pin flush type plug socket & piano key type switch (Anchor make) incl. S & F earth continuity wire , fixed on sheet metal (16 SWG) switch board with bakelite / perspex (wall matching colour ) top cover ( 3 mm thick) flushed in wall incl. mending good damages to original finish 2 * 22/0.3 as ECC on Board |
| 25 | Supply & Fixing 240 V, 4 nos.6A, plug socket with separate 4 nos. 6 A , plag socket with separate 4 nos. 6 A Piano key type switch , indicator & 16 A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240*200*65 mm MS (16SWG) switch board and bakelite / perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required |
| 26 | Add GST @ 18% |
| 27 | Add Labour Wlfare Cess @1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
