Military Engineer Services-MES has published Tender For Maintenance And Repairs Of Eot And Hot Cranes Fire Fighting Lines/Control Valves Hydrants Hose Reels And Fire Alarm System And Connecteed Items Under Ge (Af) Bidar. Submission Date for this Tender is 19-12-2023. Alarm Systems Tenders in bidar Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-12-2023 |
| 2 | 14-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-12-2023 |
| Sl. No. | Item Description |
| 1 | Disconnection and removing the pipe line connections connected to the Diesel Engine of Capacity 125 KW /167 HP (at Parachute Building), Type 4R 1040, Make :- KOEL unit carefully for finding out the defects and Servicing/ Over hauling the sameand including Replacement of unserviceable Fuel Filters, Air filters, Oil filters, Fan belt, Hose Pipe sets, Engine Oil, Coolant, Bearings complete and refixing the same in its original position couple with the pumpset and connecting the pipe line testing and commisioning complete all as specified and as directed. Note : (i) All the misc items and Fuel Filters, Air filters, Oil filters, Fan belt, Hose Pipe sets, Engine Oil, Coolant, Bearings not covered under the scope of work but required for satisfactory completion of job is deemed to be included in the unit rate. |
| 2 | All as per Item No 1 here-in-above but of capacity 58 KW/79 HP (at New ATC Building) complete all as specified and as directed. |
| 3 | All as per Item No 1 here-in-above but of capacity 44.2KW/60 HP (at Air Field FF Pump house) complete all as specified and as directed. |
| 4 | Disconnection and removing the Fire Fighting Pumps of Capacity 167 to 170 HP, Head 90 Mtr, Discharge 4590 LPMconnected to the Diesel Engine of Capacity 125 KW /167 HP (at Parachute Building) alongwith connections and overhauling the same complete including reneuwal of worn out bearings, metalling & Polishing the shaft, Coupling Unit, Oil Seal, Gland, Impeller Sleeves, Impeller lock nuts, complete and re-fixing the pump in its original postion after completion of repairs and overhauling connecting the pipelines testing and commisioning complete all as specified and as directed. Note : (1) All the misc items not covered under the scope of work but required for satisfactory completion of job is deemed to be included in the unit rate. |
| 5 | All as per Item No 4 here-in-above but of capacity 50 to 60 HP (at Air Field FF Pump house) complete all as specified and as directed. |
| 6 | All as per Item No 4 here-in-above but of capacity 79 HP (at New ATC Bldg) complete all as specified and as directed. |
| 7 | Disconnection and removing the Fire Fighting Jockey Pumpset of Capacity 10 to 15 HP, 440V connected to the Fire Fighting system (at Parachute Building, Air Field FF Pump house & New ATC Bldg) alongwith connections and overhauling the same complete including reneuwal of worn out bearings, metalling & Polishing the shaft, Coupling Unit, Oil Seal, Gland, Impeller Sleeves, Impeller lock nuts complete and re-fixing the pump in its original postion after completion of repairs and overhauling connecting the pipelines testing and commisioning complete all as directed by Engineer-in-Charge :- Note : (1) All the misc items not covered under the scope of work but required for satisfactory completion of job is deemed to be included in the unit rate. |
| 8 | Disconnection and taking down unserviceable double headed yard hydrant valve 63mm and replacing the unserviceable End Cap, Lugs Grip and Rubber Washer, checknut and Polishing the hydrant carefully and refixing the same after repairs in its original postion complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 9 | All as per Item No 8 here-in-above but Single headed yard hydrant valve 63mm dia complete all as specified and as directed. |
| 10 | Disconnection and taking down unserviceable double headed yard hydrant valve 63mm and S&F New Double headed yard hydrant valve 63mm instantatenous with operating wheels, end caps and securing chains ISI Marked complete alongwith necessary fixing materials requried for completion of job all as specified and as directed. Make :- Getec/Newage/Padmini |
| 11 | All as per Item No 10 here-in-above but Single headed yard hydrant valve 63mm dia complete all as specified and as directed. |
| 12 | Taking down unserviceable hose reel drum alongwith hose including S&F new hose reel drum with 19mm dia 36.5 Mtr long re-inforced rubberised fabric hose including 6.35mm dia nozzle with a ball valve swing type, recessed as per sample complete, hose (BIS mark) conforming to IS : 636, type II and complying to IS : 903 as replacement at requirement basis of fire fighting area complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 13 | Taking down unserviceable corroded/broken Hose Box and S&F new Hose Box made of 18 gauge MS Sheet 800 x 600 x 250mm with double door with 4mm thick glass and door frame made of 16 gauge MS Sheet painted with fire red oxide and brilliant white inside the box complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 14 | Disconnection and removing unserviceable sprinklers from any height of the building carefully and S&F New Sprinkler universal type, quick/ early response type as per IS : 15105/TAC guidelines, 68 degree temperature rating complete in Hangers and other technical buildings complete all as specified and as directed. Make :- 7 Star/Tyco/Getech |
| 15 | Disconnection and removing the AFPP Oscillating type system Foam Monitor of capacity not less than 1800 LPM and servicing/Overhauling of the Foam Monitoring unit complete including renewal of unserviceable Parts, check nuts,monitoring system, cover, proposing devicer by specialist and dual jet and re-fixing the same in its original position complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 16 | Disconnection and removing the unserviceable AFPP Oscillating type Foam Monitor system S&F NewAFPP Oscillating type foam monitor system unit of capacity not less than 1800 LPM complete all as specified and as directed by Engineer-in-Charge. Make :- Getec/Newage/Padmini |
| 17 | Disconnection and removing the AFPP Oscillating type system Water Monitor of capacity not less than 1800 LPM and servicing/Overhauling of the Water Monitoring unit complete including reneuval of unserviceable Parts, check nuts,monitoring system and cover and re-fixing the same in its original position complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 18 | Disconnection and removing the unserviceable AFPP Oscillating type Water Monitor system S&F New AFPP Oscillating type Water monitor system unit of capacity not less than 1800 LPM complete all as specified and as directed. Make :- Getec/Newage/Padmini |
| 19 | Disconnection and removing the unserviceable/ broken Stainless Steel Spindle along with the check nuts & gate from the Sluice valve of Size 80mm dia and M&L for New Spindle of same size & capacity with Brass/Stainless Steel Check nuts including polishing, mechining, threading & necessary lathe work complete all as specified and as directed. |
| 20 | All as per item No 19 here-in-above but of capacity 100mm dia sluice valve complete all as specified and as directed. |
| 21 | All as per item No 19 here-in-above but of capacity 150mm dia sluice valve complete all as specified and as directed. |
| 22 | Disconnection and removing the unservicable Sluice Valve 80mm dia and S & F Sluice Valve 80mm dia, IS-14846, PN 1.6 brass/stainless steel spindle with hand wheel head, screwed both ends for GI Pipe 80 mm dia complete all as specified and as directed. Make: Kirlosker/Upadhyaya/RMCO/Kartar |
| 23 | All as per item No 22 here-in-above but of capacity 100mm dia sluice valve complete all as specified and as directed. |
| 24 | All as per item No 22 here-in-above but of capacity 150mm dia sluice valve complete all as specified and as directed. |
| 25 | Disconnection and removing the unservicable Non Return Valve 150mm dia and S & F Non Return Valve 150mm dia, both end flanged including provn of new gasket and nuts, bolts and washers and fixed complete all as specified and directed. Make: Kirlosker/Upadhyaya/RMCO/Kartar |
| 26 | Disconnection and removing the unservicable CI Foot Valve and S & FCI Foot valve 100mm diawith all fittings includingflanges, leather washer, fasteners for fitting such as necessary size nut bolt and washer, rubber packings / joining materials complete including taking down the old unsv one complete all as specified and as directed. Make: Kirlosker/Upadhyaya/RMCO/Kartar |
| 27 | All as per item No 26 here-in-above but of capacity 150 mm dia CI Foot valve complete all as specified and as directed. |
| 28 | All as per item No 26 here-in-above but of capacity 200 mm dia CI foot valve complete all as specified and as directed. |
| 29 | Disconnection and removing the unservicable CI Butterfly Valve 80mm dia and S & F CI Butterfly Valve 80mm dia, (Wafer Type) PN 1.6 brass/stainless steel spindle with hand wheel head, screwed both ends, ISI Marked complete all as specified and directed. Make: Kirlosker/Upadhyaya/RMCO/Kartar/Audco |
| 30 | All as per item No 29 here-in-above but of capacity 100mm dia complete all as specified and directed. |
| 31 | All as per item No 29 here-in-above but of capacity 150mm dia complete all as specified and directed. |
| 32 | All as per item No 29 here-in-above but of capacity 200mm dia complete all as specified and directed. |
| 33 | Disconnection and removing the unservicable power contactor carefully from Panel board and S&F newpower contactor160 Amp Capacity , 440 V comprising of all accessories type MNX-110 complete all as specified and as directed. Make GE /Seimens/L&T. |
| 34 | Disconnection and removing the unservicable power contactor carefully from Panel board and S&F new 3 pole power contactor series CK75CA311 of capacity185Amp , 440 V comprising of all accessories complete all as specified and as directed. Make GE /Seimens/L&T. |
| 35 | Disconnection and removing the unservicable power contactor carefully from Panel board and S&F new 3 pole power contactor series CL12A311M of capacity160Amp , 440 V comprising of all accessories complete all as specified and as directed. Make GE /Seimens/L&T. |
| 36 | Disconnection and removing the unservicable power contactor carefully from Panel board and S&F newpower contactor25 to 32 Amp Capacity , 440 V comprising of all accessoriescomplete all as specified and as directed. Make GE /Seimens/L&T. |
| 37 | Disconnection and removing the unservicable Lead Acid Batteryand S&F Lead Acid Battery, 12Volt, 180 AH with Initial fully charged alongwith electrolyte and other accessories complete complete all as specified and directed. Make :- Exide/Amco/Amron |
| 38 | Disconnection and removing the unserviceable MCCB 63 Amps capacity and supply and fix MCCB 3 pole 25 KA 63 Amps 440 volts MCCB along with fixing arrangements complete all as specified and directed. Make L&Tor its equivalent in Legrand/ABB |
| 39 | Disconnection and removing the unserviceable MCCB200 Amps capacity and supply and fix MCCB 3 pole 36 KA 200 Amps 440 volts MCCB along with fixing arrangements complete all as specified and directed. Make L&Tor its equivalent in Legrand / ABB |
| 40 | Disconnection and removing the unserviceable pressure guage and S&F Pressure gauge 8"dial 0-21 kgsrating ISI Marked complete all as directed. |
| 41 | Disconnection and removing the unserviceable pressure guage and S&F Pressure gauge 4"dial 0-21 kgsrating ISI Marked complete all as specified and as directed. |
| 42 | Disconnection and removing the unserviceable battery lead connection and M&L for battery connected leads made out ofPVC Single core 1100 volts grade bunched copper conductor upto 1.5m long including one end soldered with a copper lug and the other end soldered with a brass terminal along with nut, bolt and washer complete all as specified and directed. |
| 43 | Disconnection and removing the unserviceable battery lead connection and M&L for battery connected leads made out ofPVC Single core 1100 volts grade bunched copper conductor upto 0.6 m long including both end soldered with a brass terminal along with nut, bolt and washer for interconnection of batteries complete all as specified and directed. |
| 44 | Taking up or down MS ERW steel tubing of 150 mm dia with fittings complete including cutting the pipe all as specified and as directed. Note : 1. Excavation and RFR will be measured and paid seprately under the respective items. |
| 45 | Supply and fixMS ERW pipe line suitable for existing fire fighting system of dia 150 mm bore , bearing ISI Mark , along with the fittings in trenches complete all as specified and directed. Make : Jindal /Tata / BST / Advance Steel Tubes |
| 46 | Supply and fixMS ERW pipe line suitable for existing fire fighting system of dia 200 mm bore , bearing ISI Marke , along with the fittings in trenches complete all as specified and as directed. Make : Jindal /Tata / BST / Advance Steel Tubes |
| 47 | Supply and fixMS ERW pipe line suitable for existing fire fighting system of dia 300mm bore , bearing ISI Marke , along with the fittings in trenches complete all as specified and directed. Make : Jindal /Tata / BST / Advance Steel Tubes |
| 48 | M&L painting with enamelled paint of postal red colour on iron/steel surface of any description over 10 cm in width or girth, not other wise described including preparation of old painted surface for free from dust and deposits all as specified and directed and directed. Make- Asian/Nerolac/Berger. |
| 49 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for and taking out / for laying underground pipes extra and getting out in soft / loose soil, complete all as specified and as directed. |
| 50 | Returning filling, incl spreading, levelling, watering & well ramming in layers n.exc 25 cm in soft/loose soil, complete all as specified and as directed. |
| 51 | Removing excavated soil to a distance not exc 50 m & depositing where directed at a level not .exc 1.5 m above the starting point. |
| 52 | Disconnection and removing the unservicable self starter unit 24 volts capacity carefully from the Diesel enginefor 125 KW/58KWfinding out the defects and to replace the u/s items such as field coils, bentex, armature solenoid switch etc and refixing the same in its original postion after completion repairs including testing and commissioning complete. Make : TVS Lucas/Fenner or as approved by the OEM. Note : Armature and bentex will be measured and paid unde respective item of the BOQ |
| 53 | Disconnection and removing the unservicable self starter unit 12 volts capacity carefully from the Disel enginefor 44.2 KW finding out the defects and to replace the u/s items such as field coils, bentex, armature etc and refixing the same in its original postion after completionof repairs including testing and commissioning complete all as specified and as directed. Make : TVS Lucas/Fenner or as approved by the Engr in-charge. Note : Armature and bentex will be measured and paid under respective item of the BOQ |
| 54 | Supply only bentex unit made with brass suitable for 12 volts self starter unit complete all as specified and as directed. |
| 55 | Supply only bentex unit made with brass suitable for 24 volts self starter unit complete all as specified and as directed. |
| 56 | Supply only Armature unit with copper winding suitable for 12 volts self starter unit complete all as specified and as directed. |
| 57 | Supply only Armature unit with copper winding suitable for 24 volts self starter unit complete all as specified and as directed. |
| 58 | Disconnection,Supply and fixing in existing LT panel on load switch fuse unit 200 A 4 pole AC,415 Volt with HRC Fuses without enclosure complete all as specified and as directed . Make :GE/Havells/L&T |
| 59 | Disconnection,Supply and fixing in existing LT panel on load switch fuse unit 400 A 4 pole AC,415 Volt with HRC Fuses without enclosure complete all as specified and as directed. Make :GE/Havells/L&T |
| 60 | Supply and fixing battery charging unit of capacity suitable for 12/24 volts battery and fixing in inside the AMF panel enclosure including taking down U/s battery charging unit complete all as specified and as directed. |
| 61 | Taking down radiators by unscrewing carefully nut bolts, and transporting toworkshop for cleaning washing of blocked water coolingpipe and repair and soldeing/ weldingif any including necessery hard ware material like rubber bush and taking back to site.Fixing in original portion ofthe Diesel engineset forcapacities of 125 KW to 44.2 KW complete all as specified and as directed. Make :- Kirloskar |
| 62 | Disconnecting existing RPM/Hour meter and supply and fixing new RPM/Hour meter in the Diesel engine set as per existing make complete all as specified and as directed. |
| 63 | Supply and fixing oil pressure guage as per existing sample & capacity including removing old oil pressure gauge complete all as specified and as directed. Make: Yankey/ Pricol |
| 64 | Supply & fixing temprature gauge oil/water in the diesel engineincluding taking down old temp guage. Make :- Yankey / Pricol) |
| 65 | Taking down old fuel / Oil pipe line with benjo bolt, supply and fixing new fuel/oil pipe lines (High pressure ruber pipe covered with steel armoured complete all as specified and as directed. |
| 66 | Dismantlingthe fuel tank andfuel line/pipe complete clean ,replace the broken pipe lines andreconnect the fuel line and refixing the fuel tank in same position complete all as specified and as directed. |
| 67 | Disconnecting & Supply and fixing couplingof engine to pumping set including bolts including taking down damaged couplings all as directed. Supply and fixing couplingof engine including disconnecting and taking down the dameged couplings from pumping set complete all as specified and as directed. |
| 68 | Taking down dynamo assembly from engine for repair/replacement of worn out parts and refixing the sameincluding cheking of proper charging of batteries complete all as specified and as directed. |
| 69 | Disconnecting & Supply and replace unserviceable water body pump suitablefor 125KKWgreaves Diesel engine complete all as specified and as directed. |
| 70 | Disconnection and removing the unservicable PCB carefully from Panel board and S&F newPCB 24V DC W305suitable for Make Kirloskar Diesl enginet or its equivalent complete all as specified and as directed. |
| 71 | Comprehensive maintenance of EOT Crane, of 5 ton capacity of bay length 30.0 metres, span 7.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, load test (verticality test and deflection test) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc., once in a month complete all as specified and as directed. |
| 72 | Comprehensive maintenance of EOT Crane, of 2 ton capacity of bay length 12.0 metres, span 4.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, load test (verticality test and deflection test ) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc., once in a month complete all as specified and as directed. |
| 73 | Comprehensive Maintenance of EOT Crane, of 1.5 ton capacityof bay lenth 15.0 metres, span 4.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, load test (verticality test and deflection test ) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc., once in a month complete all as specified and as directed. |
| 74 | NOTE FOR ITEM Nos : 71,72,73 (a) Cost of bearings, fixed/finger contacts, spare kits for starters, renewal of unserviceable gears, greasing to wheel drum and the ropes, renewal of push buttons, limit switch, control panel fuse, thermal relay, under voltage relay, power contactors, internal wiring of LT panel board, interconnections of other miscellaneous spares not covered under the scope of work but required for complete satisfactory comprehensive maintenance of the crane except those listed below under Serial item Nos. 04to 10 shall be deemed to include in the unit rate quoted. (b) Cost of repairs / testing such as load test with 10% extra load, thrusher brakes, rewinding of electric motors, steel ropes, control cables, gear oil will be measured and paid separately under relevant items of this BOQ. |
| 75 | (c) Labour element of spares listed below as SUPPLY ONLY also deemed to be included in the unit rate quoted. (d)The contractor has to employ minimum one experienced and trained electrician having full knowledge on cranes and one helper to carry out the regular maintenance once in a month or as required for smooth and effective functioning of Cranes and the cost is deemed to be included in the unit rate quoted by the contractor. |
| 76 | (e) Any complaints regarding breakdown will be attended with in 24 hours failing which an amount of Rs.522/per day for Electrician and Rs.370/per day for Helper as per rates circulated by Labour Commissioner will be deducted from the RAR due to the contractor. (f) Technician is responsible for cleaning and maintenance for EOT/HOT cranes under monthly maintenance. (g) Necessary tools & plants like ladder etc., required to attend the break down if any, shall be provided by the contractor and the cost is deemed to include in theunit rate quoted. (h) The contractor should submit the identity proof of Technician/Person visiting the site and also responsible for the integrity of the personnel attending the break down and monthly visits. (j) Full load test with 10% over load to be carried out once in the currency of the contract and the rates will be measured and paid under respective item accordingly. Make : Balaji Engineering Works / Tojym Steel Products / S K Cranes |
| 77 | M & L for carrying out full load test (with 10% extra load) of EOT Crane, of5 ton capacity including carrying out verticality test and deflection test in the presence of the user complete all as specified and as directed. |
| 78 | M & L for carrying out full load test (with 10% extra load) of EOT Crane, of2 ton capacity including carrying out verticality test and deflection test in the presence of the user complete all as specified and as directed. |
| 79 | M & L for carrying out full load test (with 10% extra load) of EOT Crane, of1.5 ton capacity including carrying out verticality test and deflection test in the presence of the user complete all as specified and as directed. NOTE FOR ITEM NOS: 74 ,75 & 76 (i) Cost of T&P required is deemed to be included in the unit rate quoted. (ii) Loads required for testing shall be arranged by the contractor and cost for the same is deemed to be included in the unit rate quoted. (iii) The contractor shall arrange the sealing with "O" ring and "D" shackles for connecting the loads and the cost deemed to be included in the unit rate quoted. Make : Balaji Engineering Works / Tojym Steel Products / S K Cranes |
| 80 | Supply only gear oil, grade 140 complete all as specified and as directed |
| 81 | Disconnecting and removing main motor connected to 5.0 ton capacity EOT crane and removing the unserviceable/ burntout winding and re-winding the same with single stranded super enamelled copper conductor of same gauge, weight and turns, applying insulating varnish and keeping the winding in hot air oven till the moisture completely evaporates and fixing the same back in its original position after completion of repairs, connecting the cables and all accessories, testing and commissioning complete all as specified and as directed. |
| 82 | Disconnecting and removing main motor connected to 2.0 ton capacity EOT crane and removing the unserviceable/ burntout winding and re-winding the same with single stranded super enamelled copper conductor of same gauge, weight and turns, applying insulating varnish and keeping the winding in hot air oven till the moisture completely evaporates and fixing the same back in its original position after completion of repairs, connecting the cables and all accessories, testing and commissioning complete all as specified and as directed. |
| 83 | Disconnecting and removing main motor connected to 1.5.0 ton capacity EOT crane and removing the unserviceable/ burntout winding and re-winding the same with single stranded super enamelled copper conductor of same gauge, weight and turns, applying insulating varnish and keeping the winding in hot air oven till the moisture completely evaporates and fixing the same back in its original position after completion of repairs, connecting the cables and all accessories, testing and commissioning complete all as specified and as directed. NOTES FOR SERIAL ITEM NOS: 78,79 and 80 (a) All miscellaneous items required for satisfactory completion of the job deemed to be included in the unit rate quoted. (b) The above repairs considered are anticipated only to meet any emergency requirement as per site conditions and the scope of work will be given/ shown to the contractor when necessitated. No claim whatsoever on this account will be entertained at a later stage. |
| 84 | Disconnecting and removing the unservicable hydraulic thruster & S & F new main hoist hydraulic thrusher brakes unit for 5.0 ton capacity EOT crane complete all as specified and as directed. Make: Speed O Control/ Suni Cranes |
| 85 | Disconnection & removing the unservicable hydraulic thruster & S & F new main hoist hydraulic thrusher brake unit for 2.0 ton capacity EOT crane complete all as specified and as directed. Make: Speed O Control/ Suni Cranes |
| 86 | Disconnecting and removing the unservicable hydraulic thruster & S & F new main hoist hydraulic thrusher brakes unit for 1.5 ton capacity EOT crane complete all as specified and as directed. Make: Speed O Control/ Suni Cranes |
| 87 | Disconnecting and removing the unservicable steel rope and S & F new steel rope of suitable size / dia to match the existing system suitable for 5.0/2.0/1.5 ton capacity EOT cranes complete all as specified and as directed. Make: USHA MARTIN. |
| 88 | Disconnection & removing the unservicable flexible trailing cable and S & F new PVC flexible trailing cable of size 24 core 0.75 Sqmm with multi stranded copper conductor, 1100 Volts grade suitable for 5.0 / 2.0 / 1.5 ton capacity EOT cranes complete all as specified and as directed. Make: FINOLEX / ORBIT / FINECAB. |
| 89 | Disconnection & removing the unservicable PVC flexible trailing cable S & F new PVC flexible trailing cable of size 3 core 2.5 Sqmm with multi stranded copper conductor, 1100 Volts grade suitable for 5.0 / 2.0 / 1.5 ton capacity EOT cranes complete all as specified and as directed. Make: FINOLEX / ORBIT / FINECAB. |
| 90 | Disconnection & removing the unservicable PVC flexible trailing cable S & F new PVC flexible trailing cable of size 4 core 1.0 Sqmm with multi stranded copper conductor, 1100 Volts grade suitable for 5.0 / 2.0 / 1.5 ton capacity EOT cranes complete all as specified and as directed. Make: FINOLEX / ORBIT / FINECAB. |
| 91 | Disconnecting and Removing the unservicable 5.0 HP Drive, including connected items and Supply and Fixing the 5.0 HP Drive, including connected items complete all as specified and directed by. Make: Speed O Control/ Suni Cranes |
| 92 | Disconnecting and Removing the unservicable 2.0 HP Drive, including connected items and Supply and Fixing the 2.0 HP Drive, including connected items complete all as specified and directed. Make: Speed O Control/ Suni Cranes |
| 93 | Disconnecting and Removing the unservicable 1.5 HP Drive, including connected items and Supply and Fixing the 1.5 HP Drive, including connected items complete all as specified and directed. Make: Speed O Control/ Suni Cranes |
| 94 | Disconnection and removing the unservicable Analogue Addressable Multi Sensor and Supply, Installation, Testing & Commissioning of Analogue Addressable Multi Sensor (Smoke -Heat) which is fully compatible with Analogue Addressable Protocol,having removable high performance chamber withTwin fire LED"s allow 360 degree veiwing, User selectable sensitivity modes 0 to 88 degree celsius, Incorporates Fixed Temperature and Rate Of RiseHeat and smoke elements, lock mechanism ( sensor to base), Electronically addressed, Pulsing/non-pulsing controlled from panel, rotary switches for addressing at base complete all as specified and directed.. Make :Notifier |
| 95 | Disconnection and removing the unservicable Addressable manual call point and Supply and fixing of Addressable manual call point resettable type including transparent safety cover with back box complete all as specified and directed. Make :Notifier |
| 96 | Disconnection and removing the unservicable Addressable electronic sounder cum strobe and Supply and fixing of Addressable electronic sounder cum strobe with back box,32 tone selction, EN 54 complete all as specified and directed. Make: Notifier |
| 97 | Disconnection and removing the unservicable Siren and Supply, Installation, testing & commissioning of Siren 2.0 KM Range Single Honeywell stage complete all as specified and as directed. Make :Khaitan |
| 98 | Disconnection of duracell LithiumCR 123A batteries from the Sensor and Supply 3 Volt lithium battery complete all as specified and as directed. Make :DURACELL |
| 99 | Disconnection and removing the unservicable Air vessel and S&F Air Vessel , 300 mm dia, 1 Mtr height, alongwith Auto air release valve spring loaded type complete all as specified and as directed. Make :- Getec / Newage / Padmini |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
