New Okhla Industrial Development Authority-NOIDA has published Tender For D/O Village (Repair And Maintenance Work In Community Center Of Bahlolpur Village), Noida.. Submission Date for this Tender is 21-11-2023. Building Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Providing wall Putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats. |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | 12 mm cement plaster of mix 1:4(1 cement: 4 coarse sand) |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work. |
| 6 | Kota stone slab flooring over 20mm (average) thick base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 (1 cement : 4 Coarse sand) : 25mm thick. |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). |
| 10 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battns, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove |
| 11 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m) having 50 no rounds per 6 metre length, upto 3 m height of wall with existing angle iron "Y"shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) /Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 12 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 13 | Laying old cement concrete interlocking paver blocks of any design /shape laid in required line, ldevel, curvature, colour and pattern over and including 50mm thck compacted bed of coarse sand, filling the joints wikth fine sand etc. all complete as per the direction of Engineer-in-charge. (Old C.C. paver blocks shall be supplied by the department free of Cost.) |
| 14 | Providing and laying 60 mm thick factory made cement concrete interlocking paver Bock of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 15 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead :For thicknessof tiles 10mm to 25mm. |
| 16 | Chequered terrazo tiles 22mm thick with graded marble chips on size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20mm thick bed of cement moartar 1:4 (1 cement : 4 coarse sand) : Ordinary Cement without any pigment (DSR-12/11.19.4/190) |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including geeting out the excavated soil and disposal of surflus excavated soil as directed, within a lead of 50m : All kinds of soil. |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement :4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement :2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on. New work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | P/F ISI Marked flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. :35mm thcik including ISI marked Stainless Steel butthinges with necessary screws. |
| 22 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300 x 16 mm (DSR-12/I-9.96.1/P-159) |
| 23 | P/F ISI marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. Complete : 125mm |
| 24 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.Complete : 200 x 10 mm |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-lll) : 3 graded stone aggregate 20 mm nominal size). |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo- Mechanically Treated bars of grade Fe-500D or more. |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, brassumers and cantilevers. |
| 28 | Supply of Beldar for cleaning of patri & molba |
| 29 | S/o Tractor with Trolley including Fuel and Driver complete as per direction of Engineer Incharge.. |
| 30 | P/F on wall face unplasticised Rigid PVC rian water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes : 75 mm diameter |
| 31 | Supplying and fixing reflective sinage boards made of 4mm thick aluminium coposide sheet face to be fully coveered wit 3M/Avery made High Intensity prismatic retro reflective sheeting conforming to Type-IV of ASTM-D-4956-07 as approved by Engineer-in-Charge letters boards etc. as IRC:67-2001 in silver white with respective colour back ground and with high intensity prismatic, pasted on substrate by pressure sensative adhersive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-07 and fixing the same to the plate of structural frame of M.S.Angle size 35x35x5mm with by means of suitable sizedaluminium alloys, rivets or nuts & bolts @ 300mm C/C all along the periphery as well as in two vertical rows along with theft resistance measures i/c the cost of painting. The rates includes the cost of rounding off the corners, lowring down the structual frame work from the gentry, fixing and erecting the same in position all complete as per drawings, specification and direction of Engineers in- Charge. (Structural frame work i/cSupplying and fixing reflective sinage boards made of 4mm thick aluminium coposide sheet face to be fully coveered wit 3M/Avery made High Intensity prismatic retro reflective sheeting conforming to Type-IV of ASTM-D-4956-07 asi/c M.S. Plate to be provided saparetely, Rectangular face of the sheet only shall be measured for payment.) Mandatory, cautionary, informatory road signage and all other regular pupose signs. |
| 32 | Finishing walls with water proofing cement paint of required shade :Old work (One or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 33 | Mirror polishing on marble work/Granite work/ Stone work where ever required to give high gloss finish complete. |
| 34 | P/F M.S. holder-bat clamps of approved design to Sand Cast iron/Cast iron ((spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of Cutting holes and making good the walls etc. For 100mm dia pipe. |
| 35 | Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 100 in foundation and plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 36 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 37 | Excaveting holes more than 0.10 cum & upto 0.5Cum i/c getting out the excavated soil, then returning the soil as required in layers not exculding 20cm in depth i/c consolidation each deposited layer by ramming, watering etc disposing of surplus excavated soil as directed with in a lead of 50m & lift upto 1.5m. All kinds of soil. |
| 38 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. : Range of three urina basins with 10 litre white P.V.C. automatic flushing cistern |
| 39 | Providing and fixingwater closet squatting pan (Indian type W.C. pan) with 100mm. Sand cast iron P or S trap, 10 litter low level P.V.C. flushing cistern with manually controlled device (handle lever) conforming toIS:7231, with all fitting and fixing complete including cutting and making good the walls and floors wherever required : Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585X480mm with flush pipe and integrated type foot rates. |
| 40 | Neat Cement punning |
| 41 | Providing and fixing white viteous china pedestal type water closed (European type W.C. pan) with seat and lid, 10 litre low level whte P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | P/F Wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous ChinaWash basin size 630X450mm with a single 15 mm C.P.bass pillar taps. |
| 43 | P/F Uplasticised PVC Connection pipe with brass unions : 45 Cm length :15mm nominal bore |
| 44 | P/F PVC waste pipe for sink or wash basin including PVC waste fittings complete : Flexible Pipe : 32mm dia |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 46 | Providing and Fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & Cold water supply including all CPVCplain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of jonts complete as per direction of Engineer in Charge. : External Work :15 mm nominal outer dia pipes |
| 47 | Providing and Fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & Cold water supply including all CPVCplain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of jonts complete as per direction of Engineer in Charge. : External Work :20 mm nominal outer dia pipes |
| 48 | P/F Gun metal gate valve with C.I. Wheel of approved quality (Screwed end): 25 mm nominal bore |
| 49 | Renewing glass panes, with Wooden fillets wherever necessary : Float glass panes of thickness 4 mm. |
| 50 | P/F C.P.Brass bib cock of approved quality conforming to IS : 8931 : 15mm nominal bore. |
| 51 | P/F C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931a) 15mm nominal bore |
| 52 | P/F C.P. brass stop cock (Concealed)of standard design and of approved make conforming to IS:8931 : 15mm nominal bore |
| 53 | P/L ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in all colours, shades, exceptWhite, lvory, Grey, Fume red Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) Including pointing the joints with white cement and matching pigment etc. complete. |
| 54 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level |
| 55 | Providing and fixing factory made precast RCC perforted drain covers having concrete of strength not less then M-25 of size 1000X450X50mm reinforced with 8 mm dia four Nos Longitudinal Nine Nos Cross sectional TMT hoop bar including Providing 50mm dia perforations @ 100 to 125mm C/C including providing edge binding with M.S. Flats of size 50mm X 1.6 mm Complete all as per direction of Engineer in Charge. |
| 56 | Providing gola 75x75 mm in cement in cement conrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase. |
| 57 | P/F Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. : 510x1040 mm bowl depth 225mm |
| 58 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fitting arrangement of approved quality and colour. : 600mm long towel rail with total length of 624mm, width 78mm and and effective height of 88mm, weighing not less than 190gms. |
| 59 | P/F Ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 20mm nominal bore |
| 60 | Providing and fixing PTMT Soap Dish holder having length of 138mm breadth 102mm hight 75mm with concealed. |
| 61 | P/F 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. (Area of slab over 0.50 Sqm) |
| 62 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (Two or more coats) over and including water thinnable priming coat with cement primer. |
| 63 | Filling availabe excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth : consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m. |
| 64 | P/F 600x450mm beveled edge miror of superor glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cheats with C.P. brass screws and wasbers complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
