Military Engineer Services-MES has published Tender For Repairs And Maintenance Of B And R Items At Sub Stations, Ac Plants And Water Supply Installations And Other Mes Installations At Ins Tunir And Nad Area Under Age Br Ii At Naval Station Karanja. Submission Date for this Tender is 30-11-2023. HVAC Tenders in karanja Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land complete all as specified and as directed by Engr-in-charge. Notes: (i) Taking down earthing strips incl insulators from roof for treatment and re-fixing of same with existing specification in the same position after laid APP membrance including replacement of broken insulators, PVC rawl plus and screws etc., are deemed to be inclusive of rate quoted by the contractor. (ii) Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work. (iii) APP work shall be carried out on RCC BENT roof at 15-18m height (non accessible roof). |
| 2 | Demolition of cement concrete (unreinforced) roof or chajja padding of any description and any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for PCC 1:2:4 type B-1 (Using 20mm graded mechanically crushed stone aggregates) as in padding to roof to maintain the required slope same like as in chajjas, balconies, canopies, desk slabs and in shelves and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 4 | Material and labour for water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces. (b) A layer of 4mm thick APP polymeric membrane of weight not less than 4.80 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for applying two coats bitumen water proofing aluminium heat resistance paint @ 0.10 kg/ sqm over two coats of primer on the roof as per manufacture instructions complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for ready mix plaster 10mm thick cement plaster in CM 1:3 on roof top/ concrete surface including WPC by weight of 3% of total cement content complete all as specified and as directed by Engr-in-charge. Note: WPC will be paid and measured separately. |
| 8 | Supply only liquid water proofing compound as pedicrete URP mix with cement concrete/ cement plaster as per manufacture instructions complete all as specified and as directed by Engr-in-charge. |
| 9 | Dismantling AC (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for 6mm thick asbestos cement corrugated sheet in roof fixed with "L" or "J" type hook or crank bolts complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and fix for AC two piece adjustable serrated ridge for corrugated sheets in roof coverings, fixed witth "L" or "J" hook complete all as specified and as directed by Engr-in-charge. |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 15 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed by Engr-in-charge. |
| 16 | All as per item No.15 here-in-before but not exc 1.5 sqm complete all as specified and as directed by Engr-in-charge. |
| 17 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix for second class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered or ornamental type put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for second class hardwood 30mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for second class hardwood 35mm thickness, glazed and skeleton door shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for second class hardwood 30mm thickness, glazed and skeleton windows, ventilators, etc., are provided with stiles and rails as specified in SSR Part I, section 8 clause 8.24(b), open rebated and prepared to receive glass, gauze, etc., (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for factory made solid panel PVC door shutter 30mm thick (styled) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC, "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks and eyes, peg stays and handles including connected items, with and including rubber beading for 4 or 5mm thick glass, making good to the disturbed portion with its original specifications complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for 12mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for 4mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows /doors /partition etc., complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for rubber beading suitable for fixing 4mm/ 5mm thick glass in aluminium window /doors etc., complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix in repair aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of "F" section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix in repair for aluminium (extruded section) body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for extruded aluminium alloy handles fabricated type anodized 150mm size complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for stainless steel butt hinges medium weight, cold rolled and fixed 100mm long complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix for 300mm long aluminium alloy, anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 37 | Material and labour for petty repairs to taking down steel/wood window/ventilator frame with shutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minors such as screws, clamps, cleats etc and refixing in the same opening (no extra payment will be paid for external window shutters of upto 10th floor) complete all as specified and as directed by Engr-in-charge. |
| 38 | Material and labour for petty repairs to taking down wooden/PVC doorshutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minor items such as screws, cleats, clamps etc and refixing on the same opening (no extra payment will be paid for welding of new hinges on steel chowkat frame) complete all as specified and as directed by Engr-in-charge. |
| 39 | Dismantling of stone slabs and tiles of any description or thickness in floor aprons, cills etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-charge. |
| 40 | Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed by Engr-in-charge. |
| 41 | Material and labour for 20-25mm thick machine cut kota stone slab flooring over cement screed bed 15mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing finish complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for 20-22mm thick machine cut kota stone sin riser of steps, skirting, dado, and pillar laid over cement mortar 10mm thick 1:4 and jointed with with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing finish complete all as specified and as directed by Engr-in-charge. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge. |
| 44 | Material an labour for steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and as directed by Engr-in-charge. |
| 45 | Material and labour for framed work such as grills, gratings, post of angle iron etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engr-in-charge. Note: Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply and fix for framed work in doors or gates (oranamental) of angle or other section with gusset plates, rails, braces, holdfast etc., of grade Fe 410-W (Gde E-250) quality A complete drill for fixing of steel sheeting or other covering, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running, rails & guide) and hanging also fastening and fixing complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for painting to new or previously untreated steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint complete all as specified and as directed by Engr-in-charge. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and labour for joint free coloured non skid coloured ceramic tiles in patches matching with existing tile 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc., set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thick screed bed in cement mortar in 1:6 complete all as specified and as directed by Engr-in-charge. |
| 51 | Material and labour for glazed ceramic colour designer concept glazed ceramic tiles in patches matching with existing tile 200x300x7mm or 450x350x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar 1:4 and pointed in coloured cement to match for work on vertical surface such as skirting dado etc., complete all as specified and as directed by Engr-in-charge. |
| 52 | Demolition of cement concrete in ground floor and paving not exc 15cm thick below or above ground level (unreinforced) complete all as specified and as directed by Engr-in-charge. |
| 53 | Material and labour for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate), 75mm thick as in sub base of flooring complete all as specified and as directed by Engr-in-charge. |
| 54 | Material and labour for 60mm machine pressed precasted pressed cement concrete inter locking paver blocks with grey cement and pigment glazed coloured up to 6mm on the top in any shape and size, strength not less than M-35 complete all as specified and as directed by Engr-in-charge. |
| 55 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge. |
| 56 | Material and labour for chequered cement concrete tiles 300x300x25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions and pigments with red and yellow colour over including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 57 | Material and labour for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in kerbing all around tile complete all as specified and as directed by Engr-in-charge. |
| 58 | Material and labour for PCC 1:3:6, type C2 (Using 40mm graded stone aggregate) 75mm thick as in plinth protection without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 59 | Dismantlingof brick work built in cement mortar including all qoins, arches, pillars, etc., complete all as specified and as directed by Engr-in-charge. |
| 60 | Material and labour for brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 61 | All as per item No. 60 here-in-before but except bricks Note: Serviceable bricks obatined from item No. 59 shall be re-used in item No. 60 after cleaning etc., complete all as specified and as directed by Engr-in-charge. |
| 62 | Material and labour for PCC 1:3:6, type C1 (Using 20mm graded stone aggregate) coping or filling for hold fast without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 63 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc., including removing debries directed for a distance max upto 500m complete all as specified and as directed by Engr-in-charge. |
| 64 | Material and labour for using ready mix rendering 15mm thick on fair faces of brick/concrete surfaces cement plaster in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for using ready mix rendering 15mm thick on fair facesof brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and as directed by Engr-in-charge. |
| 66 | Material and labour for using ready mix rendering 5mm thick in CM 1:3 on ceiling finished even and smooth finish complete all as specified and as directed by Engr-in-charge. |
| 67 | Material and labour for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed by Engr-in-charge. |
| 68 | Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and as directed by Engr-in-charge. |
| 69 | Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for complete removal of existing treatment from wall and ceiling by scrapping with mechanical wall sander (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc., including preparation of old decorated surfaces of walls, cornices, asbestos sheet as false ceiling and any description etc and applying (multipurpose mixer) wall care putty upto 2 mm thick and applying two coats of oil bound distemper white or coloured with the help of fully automatic airless spray machine flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI by the skilled labour over one coat of primer upto 4th storey including necessary scaffoldingcomplete all as specified and as directed by Engr-in-charge. Notes: (i) Work will be strictly executed by mechinised means/ tools as required for smart periodical services. (ii) Allow 6-8 hrs to dry the surface for painting of subsequent coats. |
| 71 | Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of camouflage pattern over one coat of primer on wall/roof complete all as specified and as directed by Engr-in-charge. Note: Work will be strictly executed by mechinised means/ tools as required for smart periodical services. |
| 72 | Supply and fix for mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix for mild steel screw bolts 10mm dia with hexagonal or square heads at one end and screwed at other ends dia of shank 5 to 10mm and length of bolt exc 5 cm but not exc 10cm complete all as specified and as directed by Engr-in-charge. |
| 74 | Material and labour for PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) as in foundation, fillings and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 75 | Dismantling fencing wire mesh, any type complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply and fix for mild steel security chain link fencing 60x60mm with PVC coated mesh made out of 3mm dia MS wire and 1mm thick PVC coating throughout fixed to RCC post including binding wire complete all as specified and as directed by Engr-in-charge. |
| 77 | Material and labour for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying two coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 78 | Material and labour for preparing old painted steel surfaces of any decription over 10cm in width or girth and applying one coat of aluminium paint complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix for double side writing informatory stainless steel reflecting sign boards size 4"x3" having with aluminium sheet base of 2mm thickness having retro reflective tape base and front colour and matter of sign board will be furnished by Engr-in-charge. The frame of sign board shall be 2"" outer dia square/ circular stainless steel 304 SS grade pipe and having two legs of stainless steel square pipe 9" long Each of 2"" outer dia square pipe the board shall be grouted in PCC work of size 350x350x450mm including taking down of existing complete all as specified and as directed by Engr-in-charge. |
| 80 | Material and labour for PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) 100mm thick as in flooring, ramp, surfaced even and fair without using extra cement complete with metallic floor hardener @3 % by weight of complete all as specified and as directed by Engr-in-charge. Note: Metallic floor hardener shall be measured and paid separately. |
| 81 | Supply only metallic floor hardener complete all as specified and as directed by Engr-in-charge. General Note: Sand grading zone-II either river sand shall be used in plaster work, PCC work and roof padding etc., and confirming to IS-383:2016. It should have the finest modulus 2.5 to 3.5 and silt contents should not be more than 4%.(Gujrat Sand shall be used in the same). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
