Tender For Addition/Alteration And Up Gradation Of Offers / Jcos And Or Md Accommodation At Ambala Cantt Under Ge ( South ) Ambala Cantt ( Reload )., Ambala-Haryana

TDR : 40481573

Tender Notice
Corrigendum Details
BOQ

Expired

Ambala , Haryana

Tender Brief : Corrigendum : Tender For Addition/Alteration And Up Gradation Of Offers / Jcos And Or Md Accommodation At Ambala Cantt Under Ge ( South ) Ambala Cantt ( Reload ).

Document Fees
₹ 1000 /-

EMD
₹ 115435.0 /-

Tender Value
Refer document

Submission Date
22-11-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	15-11-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	22-11-2023

Name of Work: ADDITION / ALTERATION AND UPGRADATION OF OFFRS/JCOs AND OR MD ACCN AT AMBALA CANTT UNDER GE (SOUTH) AMBALA CANTT (Reload)

Sl. No.	Item Description
1	SCHEDULE A PART I (B/R WORKS)Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints hacking for key & scrubbing down with water etc and removal of debries to distance exc 250 mtr complete all as specified and directed.
2	M&L for rendering 15 mm thick in cement mortar 1:6, on fair/unfair faces of brick or concrete surfaces , trowelled to even and smooth without using extra cement, complete all as specified and directed.
3	M&L forrendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with water proofing compound @ 2% by weight of cement, trowelled to even and fair without using extra cement, complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid separately.
4	Material and labour for rough cast plastering over and including 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate (of size between 6 to 12 mm ) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed.Note :- Rough cast plaster shall be applied all asspecified in clause 14.22 of SSR Part-I 2009 .
5	Supply only liquid water proofing compound ISI marked complete all as specified and directed.
6	M&L for rendering 5 mm thick in cement mortar 1:4 as in soffits of slabs/Chajja/ sunshade finishing the plastered surface even & smooth without using extra cement etccomplete all as specified and directed.
7	Material and labour for preparation of untreated / oldexternal surfaces of walls including brooming down and applying white cement based wall care putty in two coats and minimum thickness 1.00 mm in each coat and finished thickness not less than 1.00 mm after applying emery paper or sand paper and two coats of weather proof exterior emulsion paint, over a coat of primer as per manufacturers instructions etc complete all as specified and directed.
8	Material and labour for preparation of newly plastered of wall surfaces and applyingtwo coats of cement base paintover a coat of alkali resistant primer complete all as specified and directed.
9	Material and labour for preparation ofnewly rough cast plastered surfaces of wallsand applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. (Note:- Flat surface shall be measured for measurment purpose)
10	Material and labour for preparation ofnewly rough cast plastered surfaces of wallsand applyingtwo coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. (Note:- Measurment purpose only flat surface shall be measured)
11	Material and labour for preparation of old decorated plastered/unplasteredwall surfaces and applyingtwo coats of cement base paint complete all as specified and directed.
12	Material and labour for complete removal of existing treatment on walls andpreparation of surface and applying two coats of acrylic distemper over a coat of primerincludingwhite cement based wall care putty in two coats and minimum thickness 1.0mm in each coat and finished thickness not less than 1.5 mm after applying emery paper or sand paper, if undulation is more than thickness may be more and make the wall undulation free complete all as specified and directed.
13	Material and labour for complete removal of existing treatment of old ceiling and preparation ofceiling surfaces &applying two coats of white washcomplete all as specified and directed.
14	Material and labour for preparation of new plastered surface of wall & preparation of surface and applying two coats of acrylic distemper over a coat of primerincludingwhite cement based wall care putty in two coats and minimum thickness 1.0mm in each coat and finished thickness not less than 1.5 mm after applying emery paper or sand paper, if undulation is more than thickness may be more and make the wall undulation free complete all as specified and directed.
15	Demolition of cement concrete (reinforced) and (reinforcement cut as required to facilitate demolition) asin roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended workand removal of debries to distance exc 250 mtr complete all as specified and directed.
16	Demolition of cement concrete (reinforced) and (reinforcement cut as required to facilitate demolition) of any description & in any position of facia / downward facia including cutting of reinforcement and finishing the surface with CM 1:4 including providing of throating/drip-course complete including cutting of reinforcement and removal of debries to distance exc 250 mtr complete all as specified and directed.
17	Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves inncluding supports, overhangs, etc. also splays between floors and beams, etc. (rough finished flat surfaces of concrete), complete all as specified and directed.
18	Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished flat surfaces of concrete), complete all as specified and directed.
19	Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges and similar work for fla and fair finish surfaces complete all as specified and directed.
20	Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surfaces of concrete), complete all as specified and directed.
21	Material and labour for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, bed block , copings and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork complete all as specified and directed.
22	Material and labour for Reinforced Cement Concrete ofM-25 design mixusing graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.NOTE: Reinforcement shall be measured and paid for separately.
23	Material and labour for Reinforced Cement Concrete of M-25 design mix using graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.NOTE: Reinforcement shall be measured and paid for separately.
24	Material and labour for Reinforced Cement Concrete of M-25 design mix using graded crushed stone aggregate as in chajjas and the like complete all as specified and directed.NOTE: Reinforcement shall be measured and paid for separately.
25	Material and labour for mild steel TMT bars Fe 500/550 D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
26	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and removal of debries to distance exc 250 mtr complete all as specified and directed.
27	M & L for Non - skid coloured Ceramic tiles 400 x 400 x 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:4, jointed and pointed in white or coloured cement to match the tiles complete all as specified and directed.
28	M&L for Glazed ceramic colouredtiles 450 x 300 x 6 to 7mm thick onvertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles complete all as specified and directed.
29	M & L for vitrifiedceramic tiles light shade 9mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified and directed.
30	M & L for vitrifiedceramic tiles 9mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to matchthe shade selected quality laid over and including 10mm thick rendering in CM (1:3) complete all as specified and directed.
31	Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc of any description or thickness, laid, bedded and pointed in any mortar and removal of debries to distance exc 250 mtr complete all as specified and directed.
32	M & L for machine cut Kota stone slab flooring 18-22 mm thick, for staircase step in single piece (of length not more than 1200 mm), laid over over & including 15 mm thick screed bed in cement mortar (1:3)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting,rubbing and polishing (mirror finish) complete, includingmaking oftwo Nos 3x3mm grooves at tread of each step complete all as specified and directed.
33	M & L for machine cut Kota stone slab 18-22 mm thick on vertical surfaces like riser of stepsin single piece (of length not more than 1200 mm) over & including 10 mm thickrendering in cement mortar (1:3)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing (Mirror finish), complete all as specified and directed.
34	M & L for machine cut Kota stone slab flooring 20-25 mm thick,as in flooring (area of each slab not less than 55cmx55cm), laid over over & including 20 mm thick screed bed in cement mortar (1:6)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting,rubbing and polishing (mirror finish) complete all as specified and directed.
35	M & L for machine cut Kota stone slab 18-20 mm thick on vertical surfaces skirting, dado and pillar over & including 10 mm thickrendering in cement mortar (1:4)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing (Mirror finish), complete all as specified and directed.
36	M & L for granite jet black shade, 15-18 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished,bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 10 mm thickscreed bed in cement mortar(1:3) as in cookingplatform,shelves,RCCcounters,windowcills&similarsituations,complete all as specified and directed.
37	M & L for Baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut,laid over & including 15 mm thick (average thickness) screed bed in cement mortar (1:3) and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), over cooking platform complete all as specified and directed.NOTE: Full round nosing on exposed edges shall be paid separately under respectiveitem.
38	Rounding to edges of stone slabs (of any description), such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed.
39	Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
40	Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
41	Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. Note:- Rates quoted are inclusive of hinges, holdfast, lugs, PCC for hold fast and chowkhat filling, tie bars and one coat of red oxide primer.
42	Supply and fixing of pressed steel frames for doors of size 105x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. Note:- Rates quoted are inclusive of hinges, holdfast, lugs, PCC for hold fast and chowkhat filling, tie bars and one coat of red oxide primer.
43	Supply and fixing 30 mm Flush shutters, solid core construction, with block board coreand plywood face panels, commercial type on both sides etc., sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.25, complete all as specified and as directed.Note: Manufacturers test certificate shall be submitted before incorporation.
44	Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges offraming plain any numbers; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.
45	Supply and fixing of factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing inpening as per specification & drawing complete all as specified and as directed.
46	S & F of factory Made Solid PVC Moulded flush Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with wood grained printed 4mm thick moulded PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
47	M & L for factory madebox type steel windows with pressed steel frame complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with or without glazing barsdovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge.Note: (i) Window Fabrication shall be as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4 and these drgs may be referred from GE office.(ii) Mode of measurement Unit will be in Kilogram for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery and Grill/ Guard bar complete as per TD. The weight of windows will be finalized by the BOO to be convened by GE. The weight shall not include PCC back filling of the chowkhat.(iii) The PCC back filling in chowkhat of window, Sheet glass and wire gauge will be measured and paid separately against respective items.
48	M & L for factory made steel window fixed type (fabricated from P-tube sectionas shown on drawings) including necessary mild steel acessories etc. with glazing barsdovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-220R Sheet1/3 to 3/3 complete all as specified and directed. Note :- The drg as referred may seen in GE office.
49	Material and labour for 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed.
50	Supply andfixingofaluminium alloy anodised, 250mm long, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
51	Material and labour for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
52	M & L for Mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
53	Plain cement concrete (1:3:6) type C-2,using 20 mm graded mechanically crushed stone aggregate as in filling pressed steel frame /holdfast blocks etc and similarcomplete all as specified and directed.
54	Dismantling stucturel steelwork as in door chowkats, shutters, guardbars and similar items but excluding framed truss complete all as specified and directed.
55	Mild steel framed work of Fe-410W (Gde E-250) quality as in gates made of angle and other sections with gusset plates rails braces etc. complete including drilling and welding for fixing of steel sheeting or other covering of doors , gates (as shown in drgs) etc to be prepared for hanging or sliding with and including drilling and welding for fixing of steel sheeting or other covering of doors gates etcto be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting( Exclusive of steel sheeting or other covering running rails and guides) and fastening and fixing, complete all as specified and directed.
56	Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.
57	M & L for sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips and using silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq.m in each pane, complete all as specified and directed.
58	M & L for 4 mm thick figured glass pin head type and glazing with oil putty in sq n exc 0.5 sqm each and using Silicon for fixing of glass in addition to glazing putty complete all as specified and directed.
59	Material and labour for preparation of new wooden surfaces, of any description not otherwise described, over 10 cm width or girth and applyingtwo coats of approved colour synthetic enamel paint, over a coat of pink primer complete all as specified and as directed.
60	Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applyingtwo coats of approved colour synthetic enamel paint complete all as specified and as directed.
61	Supply and fixing of 150 mm size mild steel helical door spring including roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames using with flat iron 40x3 mm size 75 cm long with necessary bolts, etc.complete all as specified and directed.
62	Supply only 100 mm long cold rolled mild steel butt hinges medium weight complete all as specified and directed.
63	Material and labour for preparation of old steel surfaces, of any description not otherwise described, over 10 cm width or girth and applyingone coat of approved colour synthetic enamel paint complete all as specified and as directed.
64	Supply and fixing of 100mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
65	Supply and fixing in replacement25mm dia stainless steel fancy type drapery rodof wall thickness 0.9 mm including taking out of old pelmet/bracket, including fixing arrangements complete all as specified and directed.
66	Supply and fixing of Stainless steel bracket and stainless steel fancy type fennelcomplete all as specified and directed.Note: The accounting unit Each Pair comprises of two brackets and two fancy type fennels.
67	M & L for factory made mild steel door shutter with frame (godrej pattern), fabricated from of 1 mm thickMS sheetincluding provision of steel handle & locking arrangement by providing 04 lever lock with duplicate keys (of make Godrej, Link or Harrison or equivalent makes as mentioned in Appendix B) & handle etc,including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitchwith MS Fasteners with cement & sand mortar, complete all as specified and directed.Note :(i) The shutter area only shall be measured for the payment.(ii) The shutter with frameshall be fabricated as per Drg No TD-161.2.1 & 161.2.2 and162.2.1 & 162.2.2. The drg may be referred from GE office.
68	S & F Stainless steel plate rack standard size 1000mm x 750mmX 300mm of wt not less than 8 kg each of sheet thickness not less than 1.25mm of grade 304 complete and fixing with rawl plug and steel screws including taking down old plate rack of any size where exist , complete all as specified and directed.
69	S & F Stainless steel plate rack standard size 600mm x 750mmX 250mm of wt not less than 5 kg each of sheet thickness not less than 1.25mm of grade 304 complete and fixing with rawl plug and steel screws including taking down old plate rack of any size where exist , complete all as specified and directed.
70	M & L for rubber strips 3 to 4mm thick and65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to avoid entry of insects,dust etc complete all as specified and directed.
71	S&F 18/19 mm thickpre-laminated particle board exterior gradewith decorative choice lamination face on one side and balancing white on other side as in cup board shutter, Kitchen Cabinet shutter, shelfs, showcase drawer fixed with screws to timber frame work complete all as specified and directed.
72	S & F of decorative laminate type 1 of thickness 0.9mm of surface finish, whiteas approved by GE, fixed with approved adhesive (Fevicol) as per manufacturer\"s instructions complete all as specified and directed.
73	S & F of Wooden plain fillets of second class hard wood sectional area exc 3 and n.exc 6 sqcm. complete all as specified and directed.
74	M & L for Stainless steel (302 grade) modular kitchen pull out trays, baskets, cutlery trays, big utensil trays etc. of shape & size as directed by Engineer-In-Charge alongwith fixing acessories complete all as specified and directed.
75	S & F of zinc Coated Mild steel telesopic channel ISI marked fixed as per manufacturer instructions complete all as specified and directed.
76	S& F of Stainless steelhandle150 mm long for kitchen cabinets/Cupboards of best quality complete all as specified and directed.
77	S & F of 100 mm long extruded Stainless steel handles, fabricated type polished complete all as specified and directed.
78	S&F in repairs continuous (piano hinges) 40mm width of flap,Paino hinges, mild steel bright finish complete all as specified and directed.
79	S & F Magnetic catches with PVC body and MS plate and skirting plate including letting in and fixed complete all as specified and directed.
80	M & L for Beading of first class soft wood of cross sectional area 19 mm X3 mm fixed with polish head less nails to pre-laminated particle board including two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
81	Taking down Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning for refixing or removal to Store (Measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
82	Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
83	Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
84	Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete all as specified and directed.
85	Supply and fixing in replacement of Vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe), with PVC P or S trap and MS fixing bolts,PVC water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
86	Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed.
87	Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connectionsincluding taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.
88	S & F in replacement CP health faucetincluding 0.90 mtr long flexible tube complete all as specified and directed.Make: ESSCO Cat Part No ALE-583 or equivalent makes as mentioned in Appendix \"B\".
89	S & F in replacement PTMT jet spray with 1.00 metre PVC tube , (suitable for European seat)complete all as specified and directed. Make: PRAYAG Cat Part No 5221 or equivalent makes as mentioned in Appendix \"B\".
90	S & F in replacement cast copper alloy chromium plated toilet paper holder with flap model complete all as specified and directed.
91	S & F in replacement Pillar tap of 15mm bore fancy typechromium plated, screwed down high pressure, with or without lettered \"Hot\"or cold with cast copper alloy with capston head long screwed shanks and fly-nuts, screwed for iron pipecomplete all as specified and directed. Make:- ESSCO Cat Part No SQT-507KN or equivalent makes as mentioned in Appendix \"B\".
92	Supply andfixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with and including 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling CP of appropriate size, pillar tap 15mm cast copper alloy CP,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.
93	S & F in replacement Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and directed. Make:- ESSCO Cat Part No SQT-516KN or equivalent makes as mentioned in Appendix \"B\".Note: The quoted rate shall include the long braided hoses 450mm long for connection to mixer complete.
94	S & F in replacementbrass chromium plated fancy type bib tap for 15 mm bore pipe or union,long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down complete all as specified and directed.Make:- ESSCO Cat Part No SQT-512KN or equivalent makes as mentioned in Appendix \"B\".
95	S & F in replacement Bib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed.Make: ESSCO Cat Part No SQT-511KN or equivalent makes as mentioned in Appendix \"B\".
96	S & F in replacement Stainless steel grating doom openable 100mmsize (Minimum Weight 25 grams) with/without hole including fixing with white cement complete all as specified and directed.
97	S & F in replacement 15mm bore angle cock stop valve cast copperalloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed. Make ESSCO Cat Part No SQT-526KN or equivalent makes as mentioned in Appendix \"B\".
98	S & F in replacement Stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, of 20mm borecomplete all as specified and directed.
99	S & F in replacement Stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type) complete all as specified and directed.Make: ESSCO Cat Part No SQT-514AKN or equivalent makes as mentioned in Appendix \"B\".
100	S & F in replacement fancy type shower rose 125mm dia, sizeof rim and 30cm long CP brass pipe with swivel jointincluding fixing to steel pipe or union complete all as specified and directed. Make - ESSCO Cat Part No EOS-542A and ALE-536A or equivalent makes as mentioned in Appendix \"B\".
101	S & F in replacement chromium plated hand showerwith 1.5 mtr long flexible tubeincluding taking down existing complete all as specified and directed.Make: ESSCO Cat Part No EHS-1931 or equivalent makes as mentioned in Appendix \"B\".
102	S & F in replacement CP wall mixer telephonic type for mixing hot and cold water screwed down for 15 mm dia iron pipecomplete all as specified and directed.Make:-ESSCO Cat Part No SQT-517KN or equivalent makes as mentioned in Appendix \"B\".
103	S & F in replacement corner glass shelf, size not less than 240mm, with CP stand complete all as specified and directed.
104	S & F in replacement sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed.
105	S & F in replacement brass CP Soap dish, fixed to plugs with chromium plated brass screws, in repair complete all as specified and directed.
106	S & F in replacement brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.Make: ESSCO Cat Part No AEC-1111 or equivalent makes as mentioned in Appendix \"B\".
107	Material and labour for PVC connections 15mm size with PTMT nuts of length 450mm including taking down existing complete all as specified and directed.
108	Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, PVC waste pipe complete all as specified and directed.
109	Supply and fixing in replacement of looking mirror of size 450mmx600mm and 5.5mm thick, selected quality, bevelled edges, glass mounted on 6mm thick AC building board with aluminiumbeadingandrubber packing and fixed to wall with wooden plug with chromium plated brass screws and cup washers complete all as specified anddirected.
110	S&F in replacement of PVC cabinet with looking mirror of size 350 x 450mm complete all as specified and directed.
111	Dismantling of cast iron or RCC drain pipes 100 mm bore jointed in cement mortar from floors/walls etc. and taking out of trenches including necassary earth workcomplete all as specified and directed.
112	Dismantling of cast iron or RCC drain pipes 75 mm bore jointed in cement mortar from floors/walls etc. and taking out of trenches including necassary earth workcomplete all as specified and directed.
113	S&F in replacement75mm bore cast iron bends any radius with oval access door and diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
114	Material and labour for 75mm borecast iron soil waste and vent pipe in any length with or without ears with cement joints fixed to wall complete all as specified and directed.
115	Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm bore pipe include for hacking out cement joints or burning out lead joints and collecting useful materials and removing them to stores/credit complete all as specified and directed.
116	Excavation in trenches in Soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes etc. and not exceeding 10Sqm on plan and getting out complete, all as specified and directed by Engineer-in-Charge.
117	Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in trenchescomplete as in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.
118	Removingsurplussoil/ excavated material to a distance exceeding 250 m but n exc 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.
119	Supply and fixing in replacement, 75mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clampsor laid in trenches including taking down of old pipe as existing at site complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.
120	Supply and fixing in replacement, 110mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clampsor laid in trenches including taking down of old pipe as existing at site complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.
121	Supply and fixing in replacement 75mm dia, PVC (SWR) floor trap, plain without grating including jointing with solvent cement complete all as specified and directed.
122	Supply and fixing in replacement PVC (SWR) junction single, (Single\"T\" 110mm dia), equal or unequal complete all as specified and directed.
123	Supply and fixing in replacement PVC(SWR)bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed.
124	Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colourcylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight200 mm - 210 gms ) fixed as in repairs complete all as specified and directed.Note :(i) Inlet, outlet & wash out pipe will be measured paid for separately.(ii) The quoted rate is inclusive ofminimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.
125	Material and labour for factory made, machine pressed pre-cast concrete, interlocking paver block with grey cement & no pigmentof 60 mm thick, M-35 grade,conforming to(IS:15658-2006) set and jointed over and including 25 mm thick dry sand bedding as in floors cushioning layer below interlocking paver blocks including watering and consolidation complete and pavings of selectedshape and size as approved by GEcomplete all as specified and directed.
126	Material and labour for plain cement concrete (1:4:8) type D-2,using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, sub base to paver blocks / floors, sunken floor etc complete all as specified and directed.
127	Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.
128	Material and labour for brick work using bricks as specifiedstraight or curved on plan exceeding6.00 metre mean radius built in cement mortar (1:4) includingcorbellings etc, raking out joints internally and also externally (above G.L.) for plastering and externally joints pointed flush below ground level in the same mortar as the work proceedscomplete all as specified and directed.
129	Material and labour for brick work with sub class \"B\" bricks, old size bricks, straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
130	Material and labour for precast reinforced cement concrete (1:2:4) type B1 using 20mm graded mechanicallycrushed stone aggregate as in cover slabs for manholes / drains etc set in cement mortar 1:4 with and including using necessary formwork complete all as specified and directed.NOTE: Reinforcement will be measured and paid for separately.
131	Demolition of unreinforced cement concrete of any description and in any position such as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work removal of debries to distance exc 250mtr complete all as specified and directed.
132	Material and labour for 75 mm thick Plain cement concrete (1:3:6) type C-2,using 40 mm graded mechanically crushed stone aggregate as in path/plinth protection finished even and smooth completed without using extra cementcomplete all as specified and directed.
133	Material and labour for Plain cement concrete1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel/drains inside the manholes , copings, slabs, benching in manholes, haunching around manhole frame for settting and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed.
134	Material and labour for PCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete allas specified and directed by Engineer-in-Charge.
135	Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, wire brushing and cleaning the top surfaces of tiles, lime terracing or cement concrete, roof surfacesetc. with water including flashings and junction of parapets etc. complete all as specified and directed.
136	Demolition of mud in roof any thickness (whether full thickness removed or part thereof ) including plastering & leaping plaster and removal from site complete all as specified and directed.
137	Material and labour for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 Kg/Sqmblack finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface including heat resisting aluminium painting to APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and directed. Notes:-(i) Joint strength in logitudinal and transverse direction at 23\"Cat 650/450 N/5 cms (ii) Tear strength in logitudinal and transverse 150\"C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only.(iv) The contractor will carry out ponding test after application of APP treatment before claiming payment.
138	M & L for Plain Cement concrete1:2:4 type B-1using 20mm mechanically graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cementincluding weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed.
139	Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm gradedstone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges , coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed. Note : WPC shall be paid separately.
140	M & L for Precast PCC plain factory made tiles,ISI marked,22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry andfabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed.
141	Supply and fixing of anodised GI snap grid frame work for false ceiling grid 605x605 mmconsist of aluminium main/cross tee of size 24mm x 32mm x 0.30mm and wall grid angle 15mm x 32mm x 0.30mm thick , fixed with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including supply and fixinglaminated Gypsum Board 12mm thick as in ceilings fixed with screws as per manufactures instructions etcincluding dismantaling of wall and ceiling boards complete all as specified all as specified and directed.
142	Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 as in rafters, purlins, vertical posts etc complete all as specified and directed.
143	Material and labour for rolled Mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment for covering to steel doors, gates including necessary welding, confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.
144	Supply and fixing in replacement framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,chajjas and similar work conforming to Fe 290 Gde E-165 complete including PCC 1:3:6 as in hold fast as per site requirement complete all as specified and directed.
145	Material and labour for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, including taking down of old sheets as existing at site complete all as specified and directed.
146	Material and labour for pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge cover/cladding to wall, fixed with self tapping screwsetc including taking down of old sheets as existing at site complete all as specified and directed.
147	M & L for providing one layer of guniting of thickness not exceding 50 mm in CM 1:3 with steel reinforcement MS chicken wire mesh of weight exceeding 0.25 kg/sqm and n.exe 0.4kg/sqm if required by means of tinned tracks or welded to existing reinforcementfor top & bottom of roof slabs, beams, columns and staircase ets including scaffholding at any height as required complete all as specified and directed.
148	S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
149	M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) kerb stones with solid blocks exc 10cm in width & setting in mortar 1:4 complete all as specified and directed.
150	Demolition of lime concrete or cement conrete of any description and in any position as of sunken portion and debries to distance exc 250 mtr complete all as specified and directed.
151	Material and labour for PCC 1:5:10 type E2using40 mm graded crushed stone aggregate in foundations, filling and mass concreteas in sunken floor complete all as specified and directed.
152	M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floor rough finishescomplete as specified and directed.
153	Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applyingof the following specifications complete all as specified and directed.(i)Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. andremove all loose /unsound material, dirt, dust etc. (ii)Applying cement slurry mixed with acrylic based polymer modified cementitous composite compound coating.First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer modified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours.(iii)200 micron thick polythene film shall be pasted with help of adhesives over treatment.Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.
154	Supply and fixing in replacement of 25mm bore GI tubing, medium grade with and including all fittings, laid in trenches for water connection including, making good the distributed surface complete all as specified and directed. Note :- Earth work shall be measured and paid separetely.
155	Supply and fixing in replacement25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
156	Supply and fixing in replacement20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
157	Supply and fixing in replacement25mm bore GI tubing, medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc passing fixed to walls including, making good the distributed surface complete all as specified and directed.
158	Supply and fixing in replacement20mm bore GI tubing, medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc passing fixed to walls including, making good the distributed surface complete all as specified and directed.
159	Supply and fixing in replacement15mm bore GI tubing, medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc passing fixed to walls including, making good the distributed surface complete all as specified and directed.
160	Material and labour for cutting/tapping existing CI/GI pipe of any size/bore in position for insertion of new TEE/drilling and tapping existing water mains (in position) for branch connections of the 20/25mm bore of pipe dia complete all as specified and directed.
161	SCHEDULE A PART II (E/M WORKS)Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, bell push bell with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.
162	Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathedFRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (light point//fan point/bell point controlled by one one way switch complete all as specified and as directed.Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site.(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by JE/Engineer-in-Charge before making good the surfaces by plastering and other finishes.
163	Description all as per Srl item No. 163.00 here in before but for one 3 pin socket outletpoint 5 Amp on Independent board.
164	Description all as per Srl item No. 163.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.
165	Description all as per serial item No.163.00 above, but with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.
166	Description all as per serial item No.163.00 above, but for one power point for AC with 4.0 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one power point for AC socket, 1100 volts grade, ISI marked, including 4.0 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.
167	Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
168	Supply and fixing of switch modular, 16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.
169	Supply and fixing of bell push modular, 6 Amps, one module, single pole, 230 volts, ISI marked complete all as specified and directed.
170	Supply and fixing of socket modular, 2/3 pin, 6 amps, one way, two module, single pole, 230 volts complete all as specified and directed.
171	Supply and fixing of socket outlet, modular, 3/3 pin (6 pin), 6/16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.
172	Supply and fixing of electronic fan regulator, modular, 100 watt, two module suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.
173	Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathedFRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith and including MS sunken box or pressed steel terminal box made out of 1.6mm thick mild steel sheet metal confirming to IS 5139 (Pt-I) of 1969 and IS 14772 of 2000 and coated with two coat coats of anti corrossive paint over a coat of red oxide primer both internally and externally including provision of new 3mm thick plastic laminated sheet top cover extended upto 25mm over sunken box for housing the switches, socket outlets, fan regulators etc. with brass screws nad brass washers and making good the disturbed surfaces as per existing for one light / fan point controlled by one switch complete all as specified and as directed.Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site.(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by JE/Engineer-in-Charge before making good the surfaces by plastering and other finishes.
174	Description all as per Srl item No. 174.00 here in before but for one light point controlled by two 2 way switches.
175	Description all as per Srl item No. 174.00 here in before but for one 3 pin socket outletpoint 5 Amp on Independent board.
176	Description all as per Srl item No. 174.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.
177	Description all as per serial item No.174.00 above, but with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.
178	Supply and fixing of switch piano 5 Amps, one way, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
179	Supply and fixing of switch piano 15 Amps, one way,flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
180	Supply and fixing of switch piano 5/6 Amps, two way, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
181	Supply and fixing of bell push, 5 Amps, one way, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
182	Supply and fixing of socket outlet 3 pin, 5 amps, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
183	Supply and fixing of socket outlet 2 in 1, 3 pin, 5 & 15 amps, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.
184	Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.
185	Supply and fixing of electric bell buzzer, ding dong type, AC, 230 volts, single pole complete all as specified and as directed.
186	Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and as directed.
187	Supply and fixing in replacement of indoor decorative surface mounting LED tube light fitting, batten type, with opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz with and including 18/20 watt LED tube rod luminaries (warm/cool as per site requirement), environment friendly, high efficient, T8 with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting complete all as specified and as directed.
188	Supply and fixing in replacement LED light fitting 9-10W bulkhead luminaires with 800 lumen, industrial model, IP 65, aluminium housing, surge protection including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
189	Supply and fixing in replacement of surface mounted, mirror light, LED tube light wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, andcompact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fittingcomplete all as specified and directed.
190	Supply and fixing metal base 9/12 watt LED wall fixture light luminaire suitable for B22 LED lamp with and including lamp, compact and energy efficient, epoxy powder coated, CRCA sheetcomplete all as specified and as directed.
191	Supply and fixing of LED security light luminaire 35 watt , made up of die castaluminum housing with black epoxy powder coatingwith cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of MS pipe heavy grade, 25/32mm bore of length 0.90 metre with MS clamps, bolts, nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using cable complete all as specified and as directed.
192	Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and as directed.
193	S&F MCB DB4 way TPN double door powder coatedcomplete alongwith 200 Amp rated Bus bar, 415 Volts ratedbus bar IP 43 protection, suitable forMCB 4 Pole 63 Amp as incommer , complete allas specified and directed. Note: Thimble/lugs of rating of MCB TPNshould be used with wire for fixing in the MCB.
194	Supply and fixing of MCB TPN 63 Amps, 440 volt, 10 KA, \"C\" curve complete all as specified and directed.
195	Supply and fixing sheet metal enclosures distribution board SPN 8 way,double door , IP 43, as per IS 8623including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles including taking down the existing DB and MCBs any type complete all as specified and directed.
196	Supply and fixing sheet metal enclosures distribution board SPN 4 way,double door , IP 43, as per IS 8623including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles including taking down the existing DB and MCBs any type complete all as specified and directed.
197	Supply and fixing in replacement MCB SP single pole, 240 volts, 50 Hz, 6 to 32 Amps \"B\" curve , ISI marked, including taking down old existing MCB complete all as specified and directed.
198	Supply and fixing in replacement MCB SP single pole, 240 volts, 50 Hz, 40/63 Amps \"B\" curve , ISI marked, complete all as specified and directed.
199	Supply and fixing in replacement MCB SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA\"C\" curve, completeall as specified and directed.
200	Taking down ceiling fan of any size, any make or type, sealing cable end, dismantling blades for servicing and overhauling including greasing/oiling and replacing warnout bearing, bush, capacitor, locking pin, bolts, nuts, and hanging and refixing ceiling fan at the same location or other location and connecting up including connecting up with and including three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan including new fan hook, clamps and suitable down rod complete all as specified and as directed.
201	Taking downexhaust fans, wall brackets of any size for repairs and servicing and refixing exhaust fan on same or other location and connecting up including including connecting up with and including three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan complete all as specified and as directed.
202	Supply and fixing of exhaust fan heavy duty , metal body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete complete all as specified and as directed.
203	Supply and fixing of ceiling fans, AC, single phase, 230 volts, 1200mm sweep, with BLDC technology, maximum power input 26 to 32 watt without remote model, copper wire motor, with 5 star BEE rating along with canopy cover, down rod, U clamp, operated with existing electronic fan regulator, with and including 3 core PVC flexible cable 1 sqmm for making the connection of fan including hanging fan in clamp and connecting to existing electric connections complete all as specified and as directed.NOTE: Contractor shall write MES No. with black colour synthetic enamel paint on ceiling fan as directed.
204	Supply, installation and testing of storage type heater (Geyser) of 25 Litres Capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection and testing after installation to entire satisfaction of the Engineer-in-Charge with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body(c) Glass line coated tank (Ferro-glass technology) / Polymer coated.(d) Incoloy glass coated heating element. (e) Adjustable thermostat.(f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve.(j) Thermal Cutout Capillary Type.NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill.(a) For product - 02 Years (b) For metal tank 07 years.
205	Taking downsingle or three phase electric meter of any size for repairs and servicing and refixing energy meter on same or other location and connecting up including including connecting upcomplete all as specified and as directed.
206	Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulatedunsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including cutting chasing and making good, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed.Note- Three runs of 6.0 sqmm cable and one run of concealed conduct shall be measured as one unit.
207	Material and labour for earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m belowground level with top edge of the earthplate not less than 1.5m belownormal groundlevel, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GImedium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion, complete all as specified and directed.
208	Material and labour for PVC conduit, 15mm dia with 1 run of 1.5 Sqmm copper wire drawn through including cutting and chasing in wall and accessories such as bend, T, socket etc. for invertor circuit complete all as specified and directed.
209	Supply and fixing ofheavy duty wall mounting fan, 400mm sweep, corrosion resistant metal body, minimal noise, operation and maintenance free design, totally enclosed, high efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynimically contoured blades, rigid frame, 1400 RPM, including fixing arrangement with anchor fastner/steel frame sheet etc and testing complete including making good the disturbed surfaces to match with existing by PCC/cement mortar work and finishing with white washing/colouring/distempering etc complete all as specified and directed.
210	Supply and fixing of modular TV socket complete all as specified and as directed.
211	Material and labour for PVC conduit, 15mm dia with 1 run of coaxial cable suitable for TV connection copper wire drawn through including cutting and chasing in wall and accessories such as bend, T, socket etc. for cable TV complete all as specified and directed.
212	Material and labour for PVC conduit, suitable for telephone connection including cutting and chasing in wall and accessories such as bend, T, socket etc. for telephone complete all as specified and directed.Note:- Telephone cable shall be provided by concerned telephone provider.
213	Supply and fixing of modular telephone socket complete all as specified and as directed.
214	Supply and fixing ofLED 9 watt lamp suitable for batten holder complete all as specified and as directed.
215	Supply and fixing sheet metal enclosures vertical distribution boardVTPN, (MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole, 100 Amps 16 KA as incomerand MCBsas out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangementincluding taking down the existing DB and MCBs any type and making connection with suitable size of lugs and making good the disturbed surface matching with existing surface all as specified and directed. Note:- MCB shall be measured and paid separetely.
216	Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete complete all as specified and as directed.
217	Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 6 sqmm 2 core with suitable size of PVCconcealed/ surface conduit alongwith necessary fixingaccessories (for gate light and garage) complete all asspecified and directed.
218	Supplying and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm 4 core, suitable for 1.1 KV earthed system, in trenches, floors, ducts passing through pipe for road crossing etc, including connecting and testing, and taking down old existing service wire /UG cable of any size/type complete all as specified and directed.Note : Excavation, earth work, cable cover protection, sand cushioningand GI pipe etc shall be measured & paid for separately.
219	Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes,for under ground cable / erection of poles, stays etc not exceeding 10 Square metre on plan and getting out in soft/loosesoil including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and as directed.
220	Supply and layingin replacement of GI tubing, 40mm bore, light grade, for cable protection along/on poles/culvert/drainage or under road crossing, complete, all as specified and as directed.
221	Material and labourfor Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cmsdeep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- Punned thickness 18cm shall be measured for payment purposes.
222	Supply and laying sub class ‘B’ bricks old sizes over the HT/LT cable laid flat with width equal to length of brick laid perpendicular to the cable for protection, complete all as specified and as directed.
223	Returning, filling in, in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of any description, complete, all as specified and as directed.
224	Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete, all as specified and as directed.
225	Material and labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fast, coping of pole and strut, bed plates and the like not more than 0.30m and 0.15m depth, finishing the surface fair and even, including necessary form work, complete all as specified and as directed.
226	Material and labour for excavation/ cutting the existing hard standing/PCC/WBM road at a depth not less than 45cm and 30cm in width for passing cable through GI pipe, returning filling complete all as specified and as directed.
227	Disconnecting and taking down existing unserviceable security light fitting any type and removal from site complete all as specified and directed.
228	Disconnecting and taking down existing unserviceable Earthing any type and removal from site complete all as specified and directed.
229	Note:-Amount of credit ofRs. 127194.50 for retrieved materials is mentioned in Schedule of Credit Page Nos. 17 & 18 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition/Alteration And Up Gradation Of Offers / Jcos And Or Md Accommodation At Ambala Cantt Under Ge ( South ) Ambala Cantt ( Reload )., Ambala-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition/Alteration And Up Gradation Of Offers / Jcos And Or Md Accommodation At Ambala Cantt Under Ge ( South ) Ambala Cantt ( Reload )., Ambala-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us