Military Engineer Services-MES has published Tender For Repairs To Flooring Plastering Tiling Joinery Plumbing And Misc Repair Works Including Petty Repair To Bldgs In Wapti Area And Certain Repair To Geysers Fan And Electric Meter Including Misc Items At Afssr Under Ge Af Gurgaon. Submission Date for this Tender is 29-11-2023. Building Work Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-11-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brickwalls, etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extracement complete all as specified and as directed. Note:- Areaincludes in this items upto 4 stories of building. |
| 3 | M&L for rendering 15 mm thick onbrick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extracement complete all as specified and as directed. |
| 4 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1npatches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and as directed. |
| 5 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 6 | M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 7 | M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia / Roof projection over 20mm thick in CM 1:4 as doubing coat including cleaning of old wornout concrete,taking down plaster & applying a coat of RBR compund for proper bond of old and new concrete surface etccomplete all as specified and as directed. Notes : The Area includes in this items up to 4 th stories building. |
| 8 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames)incl cutting of frame with cutter and make good of disturb surface complete all as specified and as directed. |
| 9 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtreach with shutters ( without taking off shutters from the frames)incl cutting of frame with cutter and make good of disturb surface complete all as specified and as directed. |
| 10 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed |
| 11 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and as directed |
| 12 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 13 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roofs, chajjas,Shelves, beams complete all as specified and as directed. |
| 14 | M&L for Use and waste of form work to Chullah hoods, chajjas, shelves, weather shades,suspended slabs, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed |
| 15 | S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and as directed. |
| 16 | S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and as directed. |
| 17 | Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning in format of DD.MM.YYYYon tank complete all as specified and as directed. |
| 18 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 19 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed. |
| 20 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed. |
| 21 | S&F and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall surfaced/concelled incl Taking down or up steel tubing 15mm bore and connections and complete all as specified and as directed |
| 22 | S&F and testing galvanised steel tubing 20mm bore “medium grade” with all fittings complete fixed to wall incl Taking down or up steel tubing 20mm bore and connections and complete all as specified and as directed |
| 23 | Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and as directed. |
| 24 | Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and as directed. |
| 25 | S&F in repair 3mm thick Sheet glass, ordinary qualityand glazing with oil putty or fixing in NCL windows / Box type windowswith rubber beading in square n exc 0.5 sq.m. in each panecomplete all as specified and as directed. |
| 26 | M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface complete all as specified and as directed. |
| 27 | M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface complete all as specified and as directed. |
| 28 | M&L for preparing new plastered surface of walls and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and as directed. |
| 29 | M&L for completely removal of the existing treatment by wire brushing or sand paper or other scraping material as required from wall including prepration of surfaces complete as specified and as directed. |
| 30 | M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and as directed. |
| 31 | M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and as directed. |
| 32 | M&L for2mm thick white putty and making the surface smooth etc complete as specified and as directed. |
| 33 | M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint overr a coat of primer etc complete all as specified and as directed. Note : the area includes in this items upto 4th storied building. |
| 34 | M&L for preparation of newly plastered surface of wall,chajjas,facia and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and as directed. Note : the area includes in this items upto 4th storied building. |
| 35 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 36 | M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces complete all as specified and as directed. |
| 37 | S&F window/ventilator section of frame72x55 mmfixed to wall or concrete surface with rawl plugsmade, of galvanized steel powder coated and section of shutter 47x20 mm, mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick plain/figured sheet glass , 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed. Type-4000 series. |
| 38 | S&F powder coated (min thickness of powder coating 50 micron) aluminium three track window shutter (size 45x15mm) i.e two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and average width of apprature 1.40mm and sliding section confirming section cat No 20814 (from jindal) and frame (chowkat) of size 101.60x44.45x1.90mm thick etc including locking arrangement including Aluminium Grill from outside complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. |
| 39 | S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfacescomplete all as specified and as directed. |
| 40 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfacescomplete all as specified and as directed. |
| 41 | S&F solid PVC doorframe of size 50mm x 47mm made out of5 mm PVC sheet reinforced with MS Squre Tube in opening etc PVC sheet should be wood grain printed/plain as approved by Engr-in-charge complete all as specified and as directed. |
| 42 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed. |
| 43 | S&F 2nd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and as directed. |
| 44 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 45 | S&F 2nd class hard woodGlazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and as directed. |
| 46 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed. |
| 47 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 48 | Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete.The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts& grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured)complete all as specified and as directed. |
| 49 | M&L for 18/19mm thick Block Boards, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed. |
| 50 | S&F 100mm size, hasp and staple safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 51 | S&F factory made PVC shutter in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as specified and as directed. |
| 52 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed. |
| 53 | S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and as directed. |
| 54 | S&F 40 mm dia cup boards knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and as directed. |
| 55 | S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and as directed. |
| 56 | S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, withbolt complete all as specified and as directed |
| 57 | S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, withbolt complete all as specified and as directed. |
| 58 | S&F 150mm longmild steel pressed handle, oval type, stove enamelled complete all as specified and as directed. |
| 59 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed. |
| 60 | S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed. |
| 61 | S&F stainless steel 75 mm long butt hinges for PVC door shutters and frames complete all as specified and as directed. |
| 62 | Supply only Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 63 | S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed. |
| 64 | Demolition ofCement Concrete in sunken floors and pavings exc 15 cm thicknessabove ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed. |
| 65 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 with water proofing compound, finishing even and smooth without using extracement complete all as specified and as directed. |
| 66 | Supply only integral water proofing compound complete all as specified and as directed. |
| 67 | M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed. |
| 68 | M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) asin foundations, filling and mass concrete complete all as specified and as directed. |
| 69 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and as directed. |
| 70 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitionsetc complete all as specified and as directed. |
| 71 | M&L for Non skid , ceramic coloured tiles 9 to 10 mmthick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 72 | M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 300mmx300 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 73 | M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed. |
| 74 | M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and as directed. |
| 75 | M&L for granite (of any type) stone slab 16-18mm thick machine cut and machine polised, in skirting, Kitchen platform/dado etc laid over cement screedjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 76 | Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and as directed. |
| 77 | M&Lfor 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base complete all as specified and as directed. |
| 78 | M&L for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick( as approvedby GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid overincluding 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed. |
| 79 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls , or including fixing cantilever brackets and connecting union to waste pipe overall size 495mmx 330mmx 160mm including waste coupling and waste pipe complete all as specified and as directed. |
| 80 | S&F in repair vitreous ChinaSquatting pan "Orrisa" pattren size 580x440mm white with integral foot rest, "P" or "S" trap cement concrete beddingcomplete all as specified and as directed. |
| 81 | Supply and fixing 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directedwith glaged finish complete all as specified and as directed. |
| 82 | Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern complete all as specified and as directed. |
| 83 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 84 | S&F in repair 600mm x 450mm mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers with aluminium beading all around complete all as specified and as directed. |
| 85 | S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed. |
| 86 | S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and as directed. |
| 87 | Demolitionof brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed |
| 88 | M&L forbrick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM1:6 complete all as specified and as directed. |
| 89 | S&F in repair stop valves/angle valves fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore dia pipe complete all as specified and as directed. |
| 90 | S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed. |
| 91 | S&F in repair Bib taps, cast copper alloy chromium plated,fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed. |
| 92 | S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed. |
| 93 | S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed. |
| 94 | S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and as directed. |
| 95 | S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and as directed. |
| 96 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cmx30cm complete fixed to brick/concrete wall, with screw including rawl plugcomplete all as specified and as directed. |
| 97 | M&L for Cutting holes inbrick walls built in cement mortar Exc half brick but not exc one brickor cement lime mortar and stone walls built in lime morta and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed. |
| 98 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening FE-410-W Gde (E-250 quality) and fixing complete all as specified and as directed. |
| 99 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore including stainless steel finale & bracket etc complete all as specified and as directed. |
| 100 | Taking down cast iron soil waste and vent pipesof any description with fitting and making good to disterbed surfaces complete all as specified and as directed. |
| 101 | S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed. |
| 102 | S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed. |
| 103 | S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed. |
| 104 | S & F for 100 mm bore cast iron branch piece, "T" , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and as directed. |
| 105 | S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and as directed. |
| 106 | S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed. |
| 107 | Taking down PVC (SWR) pipesof any description with fitting and making good to disterbed surfaces complete all as specified and as directed. |
| 108 | S&F in repairs 75mm bore PVC(SWR) pipes single socketed in any lengthpressure rating 4Kg/Sq cmmedium Grade with rubber ring joints fixed to walls with GI stack clamp dash true nut and bolt complete all as specified and as directed. |
| 109 | S&F in repair75mm bore PVC (SWR) bends any radiuscomplete all as specified and as directed. |
| 110 | S&F in repair75mm bore PVC (SWR) Junction single,(single Y/T) equal or unequal complete all as specified and as directed. |
| 111 | S&F in repairs 110mm bore PVC(SWR) pipes single socketed in any lengthpressure rating 4Kg/Sq cmmedium Grade fixed to walls with dash through nut and bolt at every 2mtr length including)includingall fittings complete all as specified and as directed. |
| 112 | S&F110mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed. |
| 113 | M&L Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, complete all as specified and as directed. |
| 114 | M&L for taking down unsv geyser of 25 Ltr capacity from existing position by disconnecting Elect/ water connectioions, from any position, locations and replacing the following unsv parts as mentioned below: - |
| 115 | (i) S&F in repairs thermostat suitable for 25 ltr storage type Vertical water heater ISI mark as per existing one complete all as specified and as directed. |
| 116 | (ii) S&F in repairs LED indication lamp suitable for Geysers in roud/ rectangular shape complete all as specified and as directed. |
| 117 | (iii) S&F in repairs Geyser assembly suitable to fix thermostat, heating elements as of the existng size suitable for 25 ltr capacity geyser including suitable washers, clamps with bolts & nuts suitable for 06/09 hole complete all as specified and as directed. |
| 118 | (iv) S&F in repairs fusible plug suitable for 25 ltr capacity Geysers as per existing complete all as specified and as directed. |
| 119 | (v) Taking down unsv bottom/ top cover plates (2 half) and S&F with new bottom/ top cover plates with machine coloumns of Geyser 25 ltr capacity complete all as specified and as directed. |
| 120 | (vi) S&F in repairs steel water tank suitable for 25 ltr capacity water heater vertical type as per existing model and size complete all as specified and as directed. |
| 121 | (vii) S&F safety plug suitable for 25 ltr capacity vertical type water heater as per existing model/ make complete all as specified and as directed. |
| 122 | (viii) S&F in replacement of M S heavy duty fabricated frame suitable for holding water tank of 25 ltr capacity geyser, as per sample and existng shape and size including suitable hole for mounting the Geyser complete all as specified and as directed. Note: Sample can be taken for the geyser by the contractor from concerned JE E/M sub division before quoting the rate. |
| 123 | (ix) S&F in replacement heating element 2 KW triangle type suitable for 25 ltr capacity vertical type water heater ISI mark complete all as specified and as directed. |
| 124 | (x) S&F glass wool heat insulation superior quality suitable for geyser ofCapacity 25/35/50 ltr complete all as specified and as directed. |
| 125 | (xi) S&F outer cover in replacement suitable for 25 ltr capacity vertical water heater as per existing model heavy duty complete all as specified and as directed. |
| 126 | (xii) Supply only nuts, bolts, washers suitable of existing size and model suitable for fixing of Geyser assembly with geyser tank complete all as specified and as directed. |
| 127 | (xiii) S&F PVC connection mesh type for HOT/ cold water supply 2" long heavy duty ISI mark as per sample complete all as specified and as directed. |
| 128 | M&L for point wiring complete with stranded copper conductor 4 Sqmm size (Nominal area) PVC insulated unsheathed FRLScable 1100 volts grade confirming to IS: 694 drawn in and including medium grade concealed PVC conduit confirming toISI marked not less than 25mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 4 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one 6 pin socket outlet two in one 16/6 Amps on an independent board (for geysers point) complete all as specified and as directed. Note : 1)Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. No Extra payment will be done on this account. |
| 129 | All as per item No 115 hereinbefore but with cable 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm stranded copper unsheathed complete all as specified and as directed. Note : 1)Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. No Extra payment will be done on this account. |
| 130 | Supply and fix switch socket combination 5 Amps/16 Amps, 5 in 1, flush type in replacement all as specified and directed at site complete all as specified and as directed. |
| 131 | Supply and fixing in replacement of MCB signle pole 6-32 Amps 230 volts "C" series complete all as specified and as directed. |
| 132 | Supply & fix in replacement of SPN enclosure with two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified and as directed. |
| 133 | Supply and fix in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed. |
| 134 | S&F submain wiring withunsheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- (i) Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories shall be measured as one length including cutting chasing in wall complete. (ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 135 | S&F submain wiring withunsheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 1.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- (i) Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories shall be measured as one length including cutting chasing in wall complete. (ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 136 | S&F cable copper flexible 3 Core cicular type 2.5 sqmm heavy duty complete all as specified and as directed. |
| 137 | S&F cable copper flexible 3 Core cicular type 4 sqmm heavy duty complete all as specified and as directed. |
| 138 | Supply and fixingball bearing suitable for ceiling fan,wall mounted fan, exhaust fan, pedestal fan of same size as that of existing defective one complete all as specified and as directed. |
| 139 | Supply and fixing bush bearing suitable for ceiling fan,wall mounted fan,exhaust fan and pedestal fans complete all as specified and as directed. |
| 140 | M&L for repairing of fan stator sheet as required complete all as specified and as directed. |
| 141 | S&F screws as per sample for fixing of fan blades with fan stator complete all as specified and as directed. |
| 142 | M&L for Cleaning and preparing the surfaces of ceiling fan removing the grease, carbon dust over the fans and painting with one coat of synthetic enamel paint of approved colour with brush painting and writing MES number on the fan complete all as specified and as directed. |
| 143 | M&L for Rewinding the stator complete with super enamelled bare copper conductor with the same size and number of turns as that of the old oneinsulating, varnishing and pre heating for the Ceiling fan 1200mm/1400mm sweep complete all as specified as directed. |
| 144 | M&L for Rewinding the stator complete with super enamelled bare copper conductor with the same size and number of turns as that of the old oneinsulating, varnishing and pre heating for the Exhaust fan 200mm / 300 mm sweep complete all as specified as directed. |
| 145 | M&L for Rewinding the stator complete with super enamelled bare copper conductor with the same size and number of turns as that of the old oneinsulating, varnishing and pre heating for the Exhaust fan above 450mm sweep complete all as specified as directed. |
| 146 | M&L for Removing the damaged and corroded exhaust fan louvers and replacement with new louvers of Exhaust fan 200mm upto 300mm sweep complete all as specified as directed. |
| 147 | M&L for Removing the damaged and corroded exhaust fan louvers and replacement with new louvers of Exhaust fan above 300mm upto 450mm sweep complete all as specified as directed. |
| 148 | M&L for Removing the damaged , corroded exhaust fan blades and replaced with new blades of Exhaust fan 150/200mm / 250mm sweep as per sample complete all as specified as directed. |
| 149 | M&L for Removing the damaged , corroded exhaust fan blades and replaced with new blades of Exhaust fan above 300mm / 450mm sweep complete all as specified as directed. |
| 150 | Material and labour for shifting & fixing of old serviceable exhaust fan and makingcircular opening by cutting stone wallin any size and shapecomplete with i PCC (1:2:4) B0 12.5mm graded aggregate and grouting 04 Nos bolts of size not less than 10mm dia and 100mm long with nut & washer and making good to distrubed surface complete all as specified as directed. (Note:- Neccessary support in high rise building (ground floor to third floor)forworking from out side shall be deemed inclusive). |
| 151 | Material and labour for Shifting & fixing ceiling fan with down rod including necessary holes, nuts and bolts, pin complete all as specified as directed. |
| 152 | Material and labour for fixing fan down rod 15mm dia 2 ft long including necessary holes, nuts and bolts, pin in replacment of old u/s down rod as per site requirement complete all as specified as directed. |
| 153 | Material and labour for fixing fan canopy in replacment of old broken u/s canopy as per site requirement complete all as specified as directed. |
| 154 | S&F ceiling fan blades suitable for 1200 mm sweep ceiling fan as per samplein replacment of old broken u/s ceiling fan blade as per site requirement complete all as specified as directed. |
| 155 | Taking down ceiling fan (C/F of any size/make), cleaning its dust properly oiling and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring complete all as specified as directed. Note :- (i) The spares like cotter pin, nuts & bolts, rubber bush & hooks etc defective/damage deemedto be replaced and make the ceiling fans functional. The rates quoted for the same deemed to be included in the quoted rates. |
| 156 | Taking down exhaust fan and re-connecting up including provision of cable from ceiling rose to exhaust fan after cleaning all dust complete all as specified and as directed. Note :- (i) The spares like nuts & bolts etc defective/damage deemed to be replaced and make thefans functional. The rates quoted for the same deemed to be included in the quoted rates. |
| 157 | Supply & fixcapacitor of 2.5 mfd complete all as specified and as directed. |
| 158 | Supply & fixcapacitor of 3.15 mfd complete all as specified and as directed. |
| 159 | Supply & fixcapacitor of 4 mfd complete all as specified and as directed. |
| 160 | Supply & fixcapacitor of 0.85/1.00 mfd complete all as specified and as directed. |
| 161 | Supply only PVC insulation tape 18mm width and 25 m Length complete all as specified and directed. |
| 162 | Suply and fixing and connecting flexible copper twisted twin core of size 23/.00076 complete all as specified and directed by Engineer-in-Charge. |
| 163 | S & F heavy dutyPVC cable1100 volts grade , insulated aluminium multi stranded conductor, twin core wire of size 4 sqmm complete all as specified and as directed. |
| 164 | S & Fheavy duty PVCcable , 1100 volts grade insulated aluminium multi stranded conductor, twin core wire of size 6 sqmm complete all as specified and as directed. |
| 165 | Supply and fixingrubber shackle complete with bolt, nut, split pin complete all as specified and as directed. |
| 166 | Material and labour for fixing plastic body exhaust fan blades for 250 mm sweep in replacment of old u/s platic body exhaust fan blade as per site requirement complete all as specified and as directed. |
| 167 | Material and labour for fixing fan motor with venitilated plastic cap suitable for plastic body exhaust fan for 250 mm sweep in replacment of old u/s motor of exhaust fan all per site requirement complete all as specified and as directed. |
| 168 | Supply and fix surface mounting frame less panel, square in shape, ABS housing and PC diffuser, inbuilt driver, 12 Watts complete all as specified and as directed. |
| 169 | S&F in replacement plastic frame suitable for 250 mm sweep ventilation fan as per existing make/ model complete all as specified and as directed. |
| 170 | S&F in replacement plastic frame suitable for 200 mm sweep ventilation fan as per existing make/ model complete all as specified and as directed. |
| 171 | S&F ventilation fan motor suitable for 300 mm sweep metal fans having double ball bearing, heavyduty motor suitable for existing make/model complete all as specified and as directed. |
| 172 | S&F ceiling fan 1250mm sweep, aerodyanamic profile blades for silent operation with high twist angles leading to high air delivery, rust free re-inforced ABS blades, dust and mark resistant caoting pearl white Stealth Air complete all as specified and as directed. |
| 173 | Taking unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and as directed. |
| 174 | Taking down unserviceable MCB of any size/rating complete all as specified and as directed. |
| 175 | S & Fplug top 16 Amps, 240 volts complete all as specified and as directed. |
| 176 | S&F in repair of single phase electric meter spair parts ie display,electric moter ,electronic crcuit plats ,phase neutral terminal, magneticmotor, push butten,indicator nut bolts washer complet etc as per site requrement complete all as specified and as directed. |
| 177 | S&F in repair of Three phase electric meter spair parts ie display,electric moter ,electronic crcuit plats ,phase neutral terminal, magneticmotor, push butten,indicator nut bolts washer completetc as per site requrement complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
