Tender For Renovation/Upgradation Of Laboratory & Duty Room Along With Verandah Of Mi Room At Nsg Camp Rk Puram, New Delhi., palam-Delhi

Tender For Renovation / Upgradation Of Laboratory & Duty Room Along With Verandah Of Mi Room At Nsg Camp Rk Puram, New Delhi. ; 1 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 2 Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Orwood ) Including Stacking Within 50 Metres Lead 3 Excavating Trenches Of Required Width For Pipes, Cables, Etc Includingexcavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : All Kinds Of Soil Pipes, Cables Etc. 4 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 5 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. 6.13.1 Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) 6 Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry. 7 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Coarse Sand ) 8 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:4 ( 1 Cement: 4 Coarse Sand ) 9 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 10 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Shelves ( Cast In Situ ) 11 Edges Of Slabs And Breaks In Floors And Wallsunder 20 Cm Wide 12 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 13 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 ( 1 Cement : 4 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 14 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Stone Slab Colour Black, Cherry / Ruby Red 15 Extra For Fixing Marble / Granite Stone, Over And Above Corresponding Basic Item, In Facia And Drops Of Width Upto 150 Mm With Epoxy Resin Based Adhesive, Including Cleaning Etc. Complete. 16 Extra For Providing Opening Of Required Size & Shape For Wash Basin / Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble / Granite / Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. 17 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Waste Coupling, Cp Sink Cock Mixer, Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : 510X1040 Mm Bowl Depth 250 Mm 18 Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite Work 19 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Board One Side White Color And Other Side Of Board Laminted With Pvc Foil Of Minimum 14 Micron Thickness Of Approved Design Pasted With Hot Melt Adhesive For Cup Boards, Work Stations And Bathroom / Kitchen Cabinet Etc. Of Required Sizes Comprising Of Virgin Polymer Of K Value 58-60 ( Suspension Grade ) , Calcium Carbonate And Natural Fibers ( Wood Powder / Rice Husk / Wheathusk ) And Non Toxic Additives ( Maximum Toxicity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg / Cum And Screw Withdrawal Strength Of 1800 N ( Face ) & 900 N ( Edge ) , Minimum Compressive Strength 50 N / Mm2, Modulus Of Elasticity 850 N / Mm2 And Resistanceto Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing With Stainless Steel Piano Hinges / Soft Close Clip On Concealed Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In- Charge. 18 Mm Thick 20 Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size ( Inside ) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 100X100 Mm Size P Type 19.4.1.1 With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 21 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc.25 Mm Nominal Dia Pipes 22 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Fine Sand ) Including Testing Of Joints Etc. Complete : 100 Mm Diameter 23 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Fine Sand ) Including Testing Of Joints Etc. Complete : 200 Mm Diameter 24 Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design : 200 Mm Diameter S.W. Pipe 25 Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) Up To Haunches Of S.W. Pipes Including Bed Concrete As Per Standard Design : 200 Mm Diameter S.W. Pipe 26 Making Chases Up To 7.5X7.5 Cm In Walls Including Making Good Andfinishing With Matching Surface After Housing G.I. Pipe Etc. 27 Cutting Holes Up To 30X30 Cm In Walls Including Making Good Thesame : With Common Burnt Clay F.P.S. ( Non Modular ) Bricks 28 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Besupplied In Single Length Upto 12 Metre Or As Desired By Engineer In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 29 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm ( Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm ) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete : Ridges Plain ( 500 - 600Mm ) 30 Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections ( Galvanising @ 120 Grams Per Sqm Including Both Side ) Consisting Of Main ‘T’ Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick ( Minimum ) Sheet, Spaced1200 Mm Centre To Centre, And Cross “T” Of Size 24X28 Mm Madeout Of 0.33 Mm ( Minimum ) Sheet, 1200 Mm Long Spaced Betweenmain’T’ At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mmand Secondary Cross ‘T’ Of Length 600 Mm And Size 24 X28 Mmmade Of 0.33 Mm Thick ( Minimum ) Sheet To Be Inter Locked At Middleof The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Restingon Periphery Walls / Partitions On A Perimeter Wall Angle Pre-Coatedsteel Of Size ( 24X24x3000 Mm Made Of 0.40 Mm Thick ( Minimum ) Sheet With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calicum Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting / Making Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. Main ‘T’ Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Of Size 25X35x1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm G.I. Adjustable Rods With Galvanised Steel Level Clips Of Size 85 X 30 X 0.8 Mm, Spaced At 1200 Mm Centre To Centre Along Main ‘T’, Bottom Exposed With 24 Mm Of All Tsections Shall Be Pre-Painted With Polyster Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed Byengineer-In-Charge. Sqm 1718.70Note :- Only Calcium Silicate False Ceiling Area Will Be Measuredfrom Wall To Wall. No Deduction Shall Be Made For Exposedframes / Opening ( Cut Outs ) Having Area Less Than 0.30 Sqm.Thecalcium Silicate Ceiling Tile Shall Have Nrc Value Of 0.50 ( Minimum ) , Light Reflection > 85%, Non- Combustible As Per B.S.476 Part Iv, 100% Humidity Resistance And Also Having Thermalconductivity <0.043 W / Mk. 31 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 10.16.1 Hot Finished Welded Type Tubes 32 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 13.46.1 New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 33 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade :13.41.1 New Work ( Two Or More Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer 34 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 35 Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Windowupto 1.50 M In Height Dimension Comprising Of Upvc Multi-Chamberedframe With In-Built Roller Track And Sash Extruded Profiles Duly Reinforcedwith 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Rollforming Process Of Required Length ( Shape & Size According To Upvcprofile ) , Appropriate Dimension Of Upvc Extruded Glazing Beads Andupvc Extruded Interlocks, Epdm Gasket, Wool Pile, Zinc Alloy ( Whitepowder Coated ) Touch Locks With Hook, Zinc Alloy Body With Single Nylonrollers ( Weight Bearing Capacity To Be 40 Kg ) , G.I Fasteners 100 X 8 Mmsize For Fixing Frame To Finished Wall And Necessary Stainless Steel Screwsetc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At Allcorners, Including Drilling Of Holes For Fixing HardwareS And Drainage Ofwater Etc. After Fixing Frame The Gap Between Frame And Adjacent Finishedwall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Ofrequired Size And Of Approved Quality, All Complete As Per Approveddrawing & Direction Of Engineer-In-Charge. Variation Inprofile Dimension In Higher Side Shall Be Accepted But No Extra Paymenton This Account Shall Be Made. Three Track Three Panels Sliding Window With Fly Proof S.Swire Mesh ( Two Nos. Glazed & One No. Wire Mesh Panels ) Made Of ( Big Series ) Frame 116 X 45 Mm & Sash 46 X 62 Mmboth Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazingbead / Double Glazing Bead Of Appropriate Dimension. 36 Providing And Fixing Steel ( White Power Coated ) Crescent Lock For Upvcsliding Window / Door With Necessary Screws Etc. Complete. 37 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Orpanelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Orrebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazedshutters 25 Mm To 40 Mm Thick : Float Glass Panes 5.0 Mm Thick Glass Panes ( Weight Not Less Than 12.50 Kg / Sqm ) . 38 Fly Proof Stainless Steel Grade 304 Wire Gauge With 0.5 Mm Dia. Wire And 1.4Mm Wide Aperture With Matching Wood Beading 39 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is :2202 ( Part I ) Decorative Type, Core Of Block Board Construction Withframe Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneeringwith Vertical Grains Or Cross Bands And Face Veneers On Both Faces Ofshutters. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hingeswith Necessary Screws 40 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lockwith 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessaryscrews Etc. Complete. 41 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windowsand Other Frames, Wrought Framed And Fixed In Position With Hold Fastlugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Ordash Fastener Shall Be Paid For Separately ) .Second Class Teak Wood 42 Providing And Laying Vitrified Tiles In Floor In Different Sizes ( Thickness Tobe Specified By The Manufacturer ) With Water Absorption Less Than 0.08%And Conforming To Is:15622, Of Approved Brand & Manufacturer, In Allcolours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement:4 Coarse Sand ) Jointing With Grey Cement Slurry @3.3 Kg / Sqm Includinggrouting The Joints With White Cement And Matching Pigments Etc. Thetiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Oftiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Requiredthickness, Leveling System And Rubber Mallet For Placing The Tiles Gentlyand Easily. Glazed Vitrified Tiles Matt / Antiskid Finish Of Size Size Of Tile 800 X 800 Mm 43 Dismantling Stone Slab Flooring Laid In Cement Mortar Includingstacking Of Serviceable Material And Disposal Of Unserviceable Materialwithin 50 Metres Lead. 44 Providing And Fixingbottle Trap 40Mm Size With 300Mm & 190Mm Long Wall Connection Pipes & Wall Flange Of Make Jaquar Or Equivalent Including All Complete As Per Direction Of Engineer-In-Charge. 45 Providing And Fixing Cpvcunion In Cpvcpipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) :25 Mm ( Make Suprime ) 46 Providing And Fixing Cpvcball Valve In Cpvcpipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) 25 Mm ( Makes Suprime ) 47 Making Connection Of Cpvc Distribustion Branch With Cpvc / Iron / Aluminium Line Of Following Size By Providing And Fixing Brass Threaded Cpvc / Iron / Alumium Fitting, Including Cutting And Threading The Pipe Etc. Complete. 25 To 40 Mm Pipe 48 Providing And Fixingsingle Lever Quarter Turn Basin Pillar Cock For Wash Basin Of Make Jaquar Kubix Prime Model No Kup-35001Pm Or Equivalent Oras Per Approved Make By Engineer-In-Chargeincluding All Fittings Complete As Per Direction Of Engineer -In-Charge. 49 Add Gst Difference @6.33% On Dsr Amount 2825285 / - 50 Add Cost Index @ 7% Only On Dsr Amount 2825285 / -

Refer document

INR 30139.0 /-

INR 15.06 Lakhs /-

Name of Work: Renovation/Upgradation of laboratory & duty room along with verandah of MI room at NSG Camp RK puram, New Delhi.

Sl. No.	Item Description
1	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
2	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead
3	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc.
4	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
5	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)
6	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
7	12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
8	15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
9	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
10	Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)
11	Edges of slabs and breaks in floors and walls Under 20 cm wide
12	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
13	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
14	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red
15	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
16	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
17	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including waste coupling,CP sink cock mixer, painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm
18	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
19	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 18 mm thick
20	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
21	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes
22	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
23	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter
24	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe
25	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe
26	Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
27	Cutting holes up to 30x30 cm in walls including making good the same : With common burnt clay F.P.S. (non modular) bricks
28	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
29	Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
30	Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. sqm 1718.70 Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.
31	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes
32	Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
33	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
34	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
35	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
36	Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.
37	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
38	Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
39	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
40	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
41	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
42	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 800 mm
43	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
44	Providing and fixingBottle Trap 40mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of make Jaquar or equivalent including all complete as per direction of Engineer-in-charge.
45	Providing and fixing CPVCUnion in CPVCpipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm ( make Suprime )
46	Providing and fixing CPVCball valve in CPVCpipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm ( makes Suprime )
47	Making connection of CPVC distribustion branch with CPVC/iron/aluminium line of following size by providing and fixing brass threaded CPVC/iron/ alumium fitting, including cutting and threading the pipe etc. complete. 25 to 40 mm pipe
48	Providing and fixingsingle lever quarter turn basin pillar cock for wash basin of make Jaquar Kubix Prime model no KUP-35001PM or equivalent oras per approved make by Engineer-in-chargeincluding all fittings complete as per direction of Engineer -in-charge.
49	Add GST Difference @6.33% on DSR amount 2825285/-
50	Add cost index @ 7% only on DSR amount 2825285/-