|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 2 | Plumber ( For Removing of existing old Sanitary and plumbing pipelines) |
| 3 | Cleaner/Helper |
| 4 | Providing and fixing double scaffolding system (cup lock type) on theexterior side of building/structure, upto 25 metre height, above groundlevel, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. |
| 5 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge. |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. |
| 7 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : |
| 8 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 ltr/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. |
| 10 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) includingrounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 11 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. |
| 12 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all cpvc plian and brass threaded including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipes anf fittings with one step cpvc solvent cement ,trenching,refilling,testing of joints complete as per direction of engineer incharge.concealed work ,including cutting and chases and making good the walls etc Corrigedum/ ( 20 mm)/ Item No.10 |
| 13 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all cpvc plian and brass threaded including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipes anf fittings with one step cpvc solvent cement ,trenching,refilling,testing of joints complete as per direction of engineer incharge.concealed work ,including cutting and chases and making good the walls etc Corrigedum/25 mm/ Item No.10 |
| 14 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all cpvc plian and brass threaded including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipes anf fittings with one step cpvc solvent cement ,trenching,refilling,testing of joints complete as per direction of engineer incharge.concealed work ,including cutting and chases and making good the walls etc 32 mm32 mm/ 1st Corrgendum/ Item No.11 |
| 15 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. forPVC pipes 75mm dia., 6 kg/sqcm & class 3 |
| 16 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for110 mm dia., 6 kg/sqcm & class 3 |
| 17 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for160 mm dia., 6 kg/sqcm & class 3 |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.600 x 600 mm |
| 19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Using 20 mm nominal size graded crushed coarseaggregates |
| 22 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 24 | Earth work excavation by manual means fordrains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work |
| 25 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications |
| 26 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work |
| 27 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floorswherever required : |
| 29 | Providing and fixing plain rolled glass 3mm thick with teakwood beading of 10mm thick. |
| 30 | Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. |
| 31 | Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour,lead,lift complete as per specifications. |
| 32 | Tractor-Trolley for debris shifting and etc |
| 33 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge |
| 34 | Demolishing cement concrete manually/ by mechanical means includingdisposal of material to the appropriate disposal area asper directionof Engineer-in-charge. |
| 35 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material to the appropriate disposal area as perdirection ofEngineer-in-charge. |
| 36 | Dismantling precast concrete or stone slabs in walls, partition walls etc.including stacking to the appropriate disposal area as per direction ofEngineer-in-charge. |
| 37 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundto the appropriate disposal area as per direction of Engineer-in-charge |
| 38 | Dismantling weather proof course and removing and conveying the debris to a distance to the appropriatedisposal area as per direction of Engineer-in-charge |
| 39 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5m² and under, including cutting the patch in proper shape, rakingout joints and preparing plastering the wallsurface with white cementbased polymer modified self curing mortar, includingdisposal of rubbish,all complete as per the direction ofEngineer-In-Charge. (For Roof andWater Tanks) |
| 40 | Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, includingreplacement of hinges with screws, etc. as required, all complete asper the direction of the Engineer-in-charge. |
| 41 | Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails,covered with heat moulded PrelaminatedPVC C Channel of 5mm thicksheet & 30x50mm wide to form stiles &5mm thick & 75mm wide Prelaminated PVCSheets for top rail, lock rail& bottom rail on either side & 5mm thick, 20mm wide cross PVC sheetas gap insert for top rail & bottomrail, Panelling of 5mm thick PVC sheetPrelaminated on either side fitted in theM.S. frame, Sealed to the stiles& rails with PVC Designer beading on either side & joinedtogetherwith solvent cement adhesive etc., Complete as per manufacturers specification & direction ofEngineer-in-charge fixed to frames with 3nos of 75mm Aluminium hinges. |
| 42 | Carpenter Class Ifor removing the existing wooden work table with granite tops and for fixing stainless steel mosquito mesh to all windows |
| 43 | Chicken Mesh(150 /200 mm Wide) |
