Military Engineer Services-MES has published Tender For Additional /Alternator And Improvement To Smqs (Phase- Iii) At Afa Hyderabad. Submission Date for this Tender is 25-11-2023. Demolition Work Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Nov-2023 | Revised BOQ and Sch of Credit | BOQ | 18-11-2023 |
| 2 | 18-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-11-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of PCC in roof surfaces including existing treatment and demolition of PCC under sunken floors of bathroom including floor tiles rooms flooring etc of any description and in any position not otherwise specifically provided,complete all as specified and as directed |
| 2 | Demolition of RCC lintels, chajja, slab cover, beams of any description and height upto 3m to 5m, not other wise specically provided and in simillar works complete all as specified and as directed |
| 3 | Removal of debris (Aggregates Concrete, rubble etc of any description) obatained from demolition including loading and unloading to a distance of 5.0 Km from the starting point and deposited where directedcomplete all as specified and as directed. Note: One Load Equals to 0.62 Cum of Aggregate/Concrete debris/rubble etc. |
| 4 | M&L for Making good with Cement mortar 1:4 under cills or over arches, lintels and bressummers, including all pinning when necessary, at any height with necessary scafoldings complete all as specified and as directed. |
| 5 | Demolition of brick/stone masonry built in cement mortar of any description, complete all as specified and as directed |
| 6 | M&L for pre-cast cement concrete block masonry in (1:3:6) type C1 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 in walls/ Parapet walls etcat any heightcomplete all as specified and as directed. |
| 7 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specifiedand directed. |
| 8 | Cleaning the roof surfaces and applying oil basedbitumen primer @0.20 Kg per Sqm, providing4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centigrade, longitudinal tensile strength not less than 800N per Sqcm tearing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch, applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqmas per manufacturer instructionscomplete all as specified and as directed |
| 9 | M & L Cement concrete(1:2:4 )typeB-1 using (20mm graded stone aggregate) in haunching and padding on chajjas, approchable / unapprochable areas of any height,complete all as specified and as directed |
| 10 | M&L for applying one coat of solar reflective bituminous Aluminium paint over surface of APP water proofing membrane @ 0.1 Kg/Sqm complete all as specified and as directed. |
| 11 | Taking up or downsteel tubing and connections upto 25 mm bore for refixing or removalcomplete all as directed. |
| 12 | S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floorscomplete all as specified and as directed. |
| 13 | S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. |
| 14 | Refixing old 15 mm GI tubing obtained from Sl Item No 11of any grade, fixed with all necessary fittings / connections in new or old positions to walls and ceilings or laying in floorscomplete all as specified and as directed. |
| 15 | Refixing old 20 mm GI tubing obtained from Sl Item No 11 of any grade, fixed with all necessary fittings / connections in new or old positions to walls and ceilings or laying in floors etc complete all as specified and as directed. |
| 16 | Cutting chases for concealed water tubing in Brick or stone walls or concrete surfaces and making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girthcomplete all as specified and as directed. |
| 17 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) average 25 mm thick with water proofing compond as per manufacturers instructions, finished even and fair in bottom portion of sunken floor portion . complete all as specified and as directed. Note :(WPC will be measured & paid separately under relevant Item) |
| 18 | M&L for rendering 15mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound as per manufacturers instructions finished even and smooth in sunken portion withoutusing extra cement etc complete as specified and as directed. Note :WPC will be measured & paid separately under relevant Item |
| 19 | M&L for Applying a uniform coat of blown grade bitumen 85 / 25 @ 1.20 Kg per Sqm conforming to IS 702 over a coat of bituminous primer @ 0.70 kg per sqm and over that provision of water proofing 3mm thick APP based polymeric membrane of weight not less than 3 Kg per Sqm reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on prepared surface by forced application as per manufacturers instructions in sunken floorcomplete all as specified and as directed. |
| 20 | M&L for PCC (1:5:10) type E2 (using 40mm graded stone aggregate) In foundationfilling and mass concrete complete as specified and as directed.. |
| 21 | Supply only intergral water proofing compound as per manufacturers instructions complete all as directed. |
| 22 | M&L for 40 mm dia GI pipe as spouts in sunken floors, medium grade complete all as specified and as directed |
| 23 | Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site, complete all as specified and as directed |
| 24 | M&L Joint free Non Skid ceramic coloured tiles of premium quality 7 to 8 mm thick, (square / rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour tiles, laid over and including screed bed in CM (1:6) 10 mm thick complete all as specified and directed. |
| 25 | M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surfaces of dados skirting etc450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including backing coat / renderingin CM (1:4) 10 mm thick complete all as specified and directed. (Note: Colour of tile will be finalized by Engr-In-Charge) |
| 26 | M&L for Roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust, etc. for preparation for tilingand spreading & laying of cera bond chemical @ 6 Kg/Sqm for fixing floor tiles complete all as specified and as directed |
| 27 | M&L for Joint free Glazed colour tiles of premium quality 7 to 8 mm thick, (square / rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour tiles, laid over and including screed bed in CM (1:6), 10mm thick complete all as specified and directed. |
| 28 | All as per Item No 27 above but in vertical surfaces of dados, skirtings etc laid over and including backing coat / rendering in CM (1:4) 10mm thickcomplete all as specified and as directed. |
| 29 | S&F of 20 mm thick Granite work (table rubbed and polished) black coloured, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,laid over and including screed bed 15 mm thick in CM (1:6)complete all as specified and as directed. |
| 30 | M&L rounding to edges of stone slabs one edge, in cooking plotforms complete all as specified and as directed. |
| 31 | M & L for rendering 15 mm thick in cement mortar 1:6on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings,finished even smooth withoutusing extra cement. |
| 32 | M & L forExternal rendering 15 mm thick cement plaster in two layers 5mm thick in CM 1:4 with WPC/liquid as per manufacturers instruction over 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfacesat any height with neccesary scafoldings,finished even smooth withoutusing extra cement Note :-(WPC will be measured & paid separately under relevant Item) |
| 33 | M & L for Rendering 10 mm thick in cement mortar 1:4 on ceilings & soffits of stair case waist slab, beam bottom, etc, ofconcrete surfacesat any height including neccesary scafoldings, finished even and smooth without using extra cement.all as specified and as directed. |
| 34 | Preparation of newly plastered internal wall surface and applyingtwo coats of distemper oil emulsion over a coat of Alkali resistant priming paint over a coat of 3mm thick wall care putty complete all as specified and as directed |
| 35 | Preparing newly plastered external wall surfaces and applying two coats of cement based paint over a coat of cement primer,complete all as specified and as directed. |
| 36 | Preparingnewly plastered surfaces of ceiling and applying three coats white washcomplete all as specified and as directed. |
| 37 | S&F in repairs of Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified. |
| 38 | S&Fof Waste coupling of32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts complete all as specified and as directed. |
| 39 | S&F of Pillar taps 15 mm dia, cast copper alloy Long nose, chromium platedfancy typescrewed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore complete all as specified and as directed. |
| 40 | S&F in repair of Bib taps, CP fancy typescrewed down, screwed for iron pipe or for brass ferrule andfixed to 15mm bore pipecomplete all as specified and as directed |
| 41 | S&F in repairs of stop valves / angle cocks 15mm dia CPfancy typescreweddown high pressure screwed both ends for iron pipe or for unions, of 15mm borecomplete all as specified and as directed. |
| 42 | S&F in repairs of stop valves(concealed type) 15mm dia CPfancy type screweddown high pressure screwed both ends for iron pipe or for unions, of 15mm bore complete all as specified and as directed. |
| 43 | S&F in repairs of Vitreous china squatting pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap and set in concrete P orS trap as per site requirements including making good to floor complete all as specified and directed by Engr -in- charge. |
| 44 | S&F in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for fluslhing cistern and connections to pipes including long bends complete all as specified and as directed. |
| 45 | S&F in repairs of PVC waste pipe 32 mm bore, 900 mm longcomplete all as specified and directed by Engr -in- charge. |
| 46 | Supply and fix in repairs, PVC connection 15 mm bore with brass CP nuts, of length 450 mm complete all as specified and as directed. |
| 47 | S&F High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.complete all as specified and as directed. |
| 48 | S&F in repairs for 15 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 49 | S&F in repairs for 20 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 50 | S&F in repairs for 125 mm CP shower rose, fancy type with CP arm, all as specified and as directed |
| 51 | S&F in repair of stainless steel gratings 100mm dia, hinge or openable type, fixed with suitable solvent cement etc complete all as specified and as directed. |
| 52 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed |
| 53 | Supply and fix in repairs stainless steel sink with drain board of overall size 915mmx460mm bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchenwith plugs, washers and waste pipe including cast iron cantilever bracketsand connecting to union / pipe complete all as specified and as directed. |
| 54 | S & F in repairs Brass CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed. |
| 55 | S&F PVC cabinet of size 585x290x215, complete all as specified and as directed. Cat No; CC-252 ofPearl precision products or equivalent in prayag or equivalent approved by GE. |
| 56 | S&F Dish/plate Display Rack Stainless Steel Hand Made - Wall Hangingof Cat No. P.336 pf Prayag or equivalent (Approximte size 600mm x 900mm x 250mm), complete all as specified and as directed. |
| 57 | S&F 5mm thick Bevelled edge looking mirror of size 600x450mm, of selected quality, including fixing to walls with catch nuts, complete all as specified and as directed. |
| 58 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed. |
| 59 | S & F110 mm bore PVC (SWR) pipes type " B"single socketed, in any lengthfixed to walls or in floors, Ceiling etc complete all as specified and as directed. |
| 60 | S & F75 mm bore PVC (SWR) pipestype " B "single socketed, in any length fxed to walls or in floors, ceilingcomplete all as specified and as directed. |
| 61 | S & F 110 mm dia bore PVC (SWR) bends, any radius with oval access door,complete all as specified and as directed. |
| 62 | S & F110 mm dia bore PVC (SWR) bends, any radius,complete all as specified and as directed. |
| 63 | S & F75 mm dia bore PVC (SWR) bends, any radius with oval access door, complete all as specified and as directed. |
| 64 | S & F 110 mm bore PVC (SWR) vent cowl,complete all as specified and as directed. |
| 65 | S & F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal with access door,complete all as specified and as directed. |
| 66 | S&F in repair of Cast iron Nahani trap of 75mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any descriptioncomplete all as specified. |
| 67 | S&F in repair of Cast iron floor trap of 100 mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any descriptioncomplete all as specified. |
| 68 | S & Fin repairs Salt glazed stoneware gully trap, P type 150x100mmmm, including taking down existing of any descriptioncomplete all as specified and as directed. |
| 69 | Complete removal of the existing treatment on walls and applying three coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 70 | Complete removal of the existing treatment on ceilings and applying two coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for complete removal of the existing old treatment on walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L for complete removal of existing painting on old plastered or unplastered surfaces on wallsincluding cornices by applying two coats of cement based paint over a coat of cement primerall as specified and directed by the Engineer-in-Charge. |
| 73 | M&L for complete removal of existing painting on old plastered or concrete facia/cornice surfaces and applying two coat of santex matt painting over a coat of primertcomplete all as directed. |
| 74 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 75 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 76 | M & L for preparing old painted steel and iron Surfaces, plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 77 | S&F Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) ,threelayered, hoisted and fixed in positionincluding out let and inlet connections including dismantling existing water tanks of capacity 500 litres, all as specified in SSR part–I and as directed.. |
| 78 | S & F20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed. |
| 79 | S&F Stainless steel tubular curtain rails 20mm diacompleteall as specified and as directed |
| 80 | S&F 20mm dia fancy type brass chromium plated curtain end finials,completeall as specified and as directed |
| 81 | S&F stainless steel brackets suitable for 20mm dia curtain rails, etc completeall as specified and as directed |
| 82 | Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed. |
| 83 | Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed. |
| 84 | Taking down shutters of any description of area exc 1.0 sqm but n exc 2 sqm each complete all as specified and as directed. |
| 85 | M & LPCC 1:2:4 type B1 using 20 mm graded aggregate for bed blocks for securing hold fast and the like including weathering, sligtly rounded or chamfered angles and throating, with necessary formwork complete all as specified and as directed. |
| 86 | S & F Pressed steel frames 105x60mm size made with 1.25 mm thick sheet , for doors with singlerebates including necessary fixing lugs, lock strick plate, etc,complete all as specified. |
| 87 | S & F Pressed steel frames 125x60mm size made with 1.25 mm thick shee for doors with double rebates including necessary fixing lugs, lock strick plate, etc,complete all as specified. |
| 88 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in filling of hollow portion of pressed steel framecomplete all as specied and as direceted. |
| 89 | S & F 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 90 | S & F35 mm thick factory made second class hardwood glazed / gauzed and skeleton door shutters , open rebated and prepared to receive glass, gauze, mesh etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.24 (a) and fixed to chowkats complete all as specified and as directed. |
| 91 | S&F Powder coated (Thickness not less than 50micron) Aluminium Three Track Sliding windows of Approximate size 2000mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 92x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings as per standard Engg. practice, complete all as specified and directed. |
| 92 | S&F Powder coated (Thickness not less than 50micron) Aluminium Two Track Sliding windows of Approximate size 115mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 61.85x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings as per standard Engg. practice, complete all as specified and directed. |
| 93 | S&F Powder coated (Thickness not less than 50micron) Aluminium ventilators of approximate size 600mm x 800mm, top hung type made out of anodised aluminium extruded section of thickness not less than 1.50 mm, including 5 mm thick tinted glass,suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles, peg stay and including all other required fittings as per standard engg. practice, complete all as specified and directed. |
| 94 | S&F Powder coated (Thickness not less than 50micron) Anodised Aluminium frame for windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 95 | S&F Powder coated (Thickness not less than 50micron)Anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 96 | S&F 4.80mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane and fixed to aluminium frames or shutters of any description complete all as specified and directed by Engr in charge. |
| 97 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick" F" or " H" section channelsfixed with steel screws complete all as specified and directed. |
| 98 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed |
| 99 | S&F in repair MS framed work such as in grills and framed guard bars for windows/ventilators with ends of bars shouldered and/or riveted, or forged into spikes etc and similar work conforming to Fe 290, Gde E 165 etc complete all as specified and as directed |
| 100 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out ofsolid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)all as specified and as directed |
| 101 | S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with "C" type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specificationsall as specified and as directed |
| 102 | Taking down shutters of any description exc1 sqm but n exc 2 sqm and refixing the same in same openings after repairing or cutting bottom as per site requirement, complete all as specified and as directed |
| 103 | S & Fbutt hinges of 100mm size, medium weight cold rolled mild steel and fixedcomplete all as specified and as directed. |
| 104 | S & F butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed. |
| 105 | S & F150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 106 | S & F tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed. |
| 107 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 108 | S & F 300mm long mild steel ordinary rat and tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 109 | S&F50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 110 | S&F second class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and as directed. |
| 111 | S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor, etc complete all as specified and as directed |
| 112 | Running welding in repairs of thickness of metal n.exc 6 mmcomplete all as specified and as directed. |
| 113 | M & L Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint ) over a coat of pink primer, complete all as specified and directed. |
| 114 | M & Lfor preparation and applying two coats of synthetic enamel paint over a coat of red oxideprimer on newly treated steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed. |
| 115 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level,complete all as specified and as directed.. |
| 116 | M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 117 | M&L 75 mm thick Cement concrete in Sub base to pavings, type D2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed |
| 118 | M&L 75 mm thick Cement concrete, type B-1, 1:2:4 (20mm graded aggregate) as in pavings,finished even and smoothwithout using extra cement, complete all as specified and as directed |
| 119 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A,complete all as specified and as direceted. |
| 120 | M&L 75 mm thick plain cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as inplinth protection etc.,finished even and smooth without using extra cement complete all as specified and as directed. |
| 121 | Complete removing of plants including roots by dismantling / cuttings etc. of brick work / PCC / RCC including necessary scaffolding,any type,any location /height ( i.e roof, parapet walls near pipes etc.) and applying conc Acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 Type B-O and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified & directed by Engr- in -Charge. |
| 122 | M&L for cleaning the spalled concrete covers, exposed reinforced corroded bars with water and applying two coats of ZINC RICH anti corrosive coat on bars and then replaster the same with cement mortar 1:4 of average thickness of 40mm, all around with WPC on ceilings & soffits of stair case waist slab, beams ofconcrete surfacesat any height with neccesary scafoldings, finished even and smooth without using extra cement with necessary bonding agent as directed. Make: Build core chemicals, STP limited, Dr.Fixit or equivalent approved by GE. |
| 123 | M&L for taking down existing pointing of any description including racking out joints, hacking for keys, scrubbing down with water and providing raised pointing to old stone walls surfaces of any description, with necessary scaffoldings, by using cement mortar 1:3 complete all as specified and as directed. |
| 124 | M&L in repair Second class hard-wood in scantlings, clean sawn, fixed to existing chowkats or to walls,complete all as specified and as directed |
| 125 | M&L for Second class hardwood Plain fillets in cub boards, shelves, etc Exc 13 & n. exc 25 sq. cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, ,complete all as specified and as directed |
| 126 | M&L for Second class hardwood Plain fillets in cub boards, shelves, etc Exc 6 & n exc 13 sq. cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, ,complete all as specified and as directed |
| 127 | M&L 18mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, all as specified and as directed.. |
| 128 | M&L 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works,all as specified and as directed.. |
| 129 | M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured andpattern as approved and fixed over plywood with approved adhesive all as specified. |
| 130 | M&L for external teak wood lipping, 6mm thick, fixed with nails 19mm wide.complete all as specified and as directed |
| 131 | S&F Brass Continuous (piano) hinges,width of flap 30mm bright finish or electrogalvanised, all as specified and as dierected. |
| 132 | Supply and fix 100mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 133 | S&F in repairs of 100mm aluminium anodised Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. |
| 134 | S&F tower bolt 100mm long, extruded aluminium anodised complete all as specified and as directed. |
| 135 | Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out soft/loose soil,complete all as specified and as directed. |
| 136 | Demolition and breaking up drain / sewage pipes 150 mm dia, (Salt glazed ware, AC or Reinforced concrete) set in concrete mortar, complete all as specified and directed. |
| 137 | Cutting holes into or through stone wall built in cement mortar or cement lime mortar and walls of cement concrete, of superficial area exc 400 sq. cm but n. exc. 0.10 sqm, complete all as specified and directed. |
| 138 | Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm in soft/ loose soil,complete all as specified and as directed. |
| 139 | Removing excavatedmaterialto a distance exc 1.50 KM but n exc 5 KM distance and depositing where directed at a level n.exc 1.5mm abovethe starting pointcomplete all as specified and as directed. |
| 140 | M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 150 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed. |
| 141 | M&L for 150 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed. |
| 142 | Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and as directed. |
| 143 | M&LProviding precast cement concrete type B1 1:2:4 ( 20 mm graded aggregate ) in landing, cover slabs manholes, chullah hoods , chajjas , water troughs , shelves and similar articles with plain faces set in cement mortar 1:4,complete all as specified and directed. Note: Reinforcement shall be measured sepreatly |
| 144 | S&F mild steel TMT bar 6mm to 8mm dia, cut to length , bent to shape as required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.complete all as specified and directed. |
| 145 | Taking down the unserviceablepoint wiring (light, fan, socket or power) complete with fittings such as switches, sockets ceiling roses pendent regulators, sockets etc any light points and making good disturbed surfaces of walls and floorscomplete all as specified and directed. |
| 146 | Taking down unserviceable MCBs, DBs, Main switches complete all as specified and directed. |
| 147 | Removing the existing metering board Panel from theexisting wall after removing the existing serviceable electric metersall as specified and directed.Note- Serviceable electric meter to be fixed in the new panel board. item No- 148 |
| 148 | Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet of size 1.5x1.2x0.2mtr and made out of 2mm thick CRCA MS sheet with front door having glass window for viewing KWH meter and other doors shall be opaque. All door sholud have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint (shade : RAL 7032 SIEMENS GREY). The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories:- |
| 149 | (a) Four pole MCCB, 100Amps with breaking capacity of 16KA having adustable thermal and fixed magnetic release. (b) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drillingfor connections and duly covered with heat shrinkable PVC sleeves of standard colour code. (c) MCB SPN 32Amps, 10KA - 5Nos. (04Nos for meters, 01 for Spare) (d) MCB SPN 10Amps-01 (1 for Security lights & Stair Case) (e) Analog type timer up to 10Amps capacity single phase 230voltage for building security lights & common lights (f)Two way bakelite connector with nut, bolts and wahsers suitable for connecting the outgoing wires in the cabinet - 6Nos (g) Fixing of old serviceable electric meters obtained from the old meter panel board. (h) Internal wiring of meters / MCB / Cable connector shall be carried out with10Sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core cable of standard colour code for phase & neutral including necessary lugs /nuts /bolts / washers etc. (j) LED phase indicating lamps (RYB) with control MCB (SP-2Amps) - 3Nos. Taking down ceiling fan/Exhaust fan, dismantling blades and removing fan and refixing ceiling fan/exhaust fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed. |
| 150 | Taking down ceiling fan/Exhaust fan, dismantling blades and removing fan and refixing ceiling fan/exhaust fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed. |
| 151 | M&L for point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core cable with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVCcondit or PVC conduits/ Casing Caping of suitable size withaccessories fixed orconsealed in stone walletc., Including terminal boxes made out of 1.2mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated Bakelite sheet for housing switches, sockets, regulators etcfor One light point controlled by one one way 5 Amps switch |
| 152 | Note (i) : Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. |
| 153 | (ii) Same size wire shall be used for phase, neutral & earth conductor |
| 154 | (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. |
| 155 | All as per item No 151 above but one light point controlled by two, two way 5 Amps switch |
| 156 | All as per item No151above but one ceiling fan /Exhaust fan point controlled by one 5 Amps switch |
| 157 | All as per item No 151above but socket 5 amp on independent board. |
| 158 | All as per item No 151 above but one 3/5 pin socket out let5 amp on same board with other switches. |
| 159 | All as per item No 151 above but one bell/buzzer controlled by one 5 Amps push button switch. |
| 160 | All as per item No 151 above butwiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuitycablefor 6 pin 15 Amps socket out controlled by 15 Amps switch.complete all as specified and as directed. |
| 161 | Supply and fixswitch socket combination 5 A/ 15 Amps 5 in 1, multipurpose flush type, ISI markedcomplete all as specified and as directed. |
| 162 | Supply and fixswitch socket combination 2 in 1,5 Pin 5 Amps, multipurpose flush type, ISI markedcomplete all as specified and as directed. |
| 163 | Supply & Fixing socket outlet 3/5 pin 5 Amp flush type ISI markedcomplete all as specified and as directed. |
| 164 | Supply and fixswitch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI markedcomplete all as specified and as directed. |
| 165 | Supply and fixswitch piano flush type, single pole, two way, 5 Amps, 230 volts, ISI marked complete.ISI markedcomplete all as specified and as directed. |
| 166 | Supply and fixbell push , 5 Amps, 230 volts, ISI markedcomplete all as specified and as directed. |
| 167 | S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI markedcomplete all as specified and as directed. |
| 168 | Supply and fix Bell Multi Music type AC 230 V complete all as specified and as directed. |
| 169 | S & F stepped type electronic fan regulator flush type all as specified and as directed. |
| 170 | Supply & Fixing angle holder/batten holder insulated complete all as specified and as directed. |
| 171 | S&F surface mounting / wall mounted LED tube light fitting 1x18 to 20wattshigh efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge. |
| 172 | S&F surface mounting / wall mounted LED tube light fitting 1x10wattshigh efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge. |
| 173 | Supply & Fixing 1x10W LED Bulkhead fitting housing with high pressure die cast alluminium, poly carbonate front diffuser cover including LED driver, Lamp andall accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size including taking out old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 174 | Supply and fix GI pipe light grade brackets 40 mm dia, 1.5 m long bent to shape as required and fixed with suitable size of 02 Nos MS clamps made out of flat 25mm x 4mm duly drilled with nuts, bolts, washers etc., to poles/walls complete all as directed. |
| 175 | Supply and fixLED Street light fitting 1 X 30 Watt LED pressure die cast aluminum housing heat resistant toughened glass with frame , IP - 66 protection, uniform distribution Make:-CromptonCat Part No:- LSTO-30-CDL or equvalent ( suitable for 40 mm outer dia G I pipe) and connecting up .complete all as specified and as directed. |
| 176 | M&L for Sub Main wiring PVC insulated cable 2 single core 10sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & capping of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiringetc. complete all as specified and directed by Engineer-in-Charge. |
| 177 | Note (I): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. |
| 178 | (II)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. |
| 179 | (III) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. |
| 180 | M&L for Sub Main wiring PVC insulated cable 2 single core 6sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & capping of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiringetc. complete all as specified and directed by Engineer-in-Charge. |
| 181 | Note (I): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. |
| 182 | (II)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. |
| 183 | (III) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. |
| 184 | M&L for Sub Main wiring with two runs of 1.5sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge.(For Bldg Security Light) |
| 185 | Note:-(i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. |
| 186 | (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. |
| 187 | (iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint. |
| 188 | Supply and fix Sheet metal enclosure single door MCB DB2 way with 240v rated without busbar complete all as specified and directed by Engineer-in-Charge. |
| 189 | Supply and fix Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge. |
| 190 | S & F MCB SPN 6 to 32A, 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge. |
| 191 | S & F MCB SP 6 to 32A 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge. |
| 192 | M&L for Earthing complete with GI earth plate electrode of size 600x600x6.6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel,protected by galvanized iron pipe 40mm bore (Medium grade) allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item). |
| 193 | Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling,PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit |
| 194 | M & L sand covering/Cushioning for underground cable protection all as specified in SSR Part- I and punning down complete all as specified and directed by Engineer-in-charge. Note: Punned thickness shall be measured |
| 195 | M&Lfor burntbricks sub class"B" laid perpendicularover & cushioning for cable protectioncomplete all as specified & directed at site by the Engr- in Charge. |
| 196 | Supply and lay LT UG cable,XLPE insulated armoured, heavy dutyaluminium conductor multistranded, 1100volts grade, of 16Sqmm x 4core cross sectional area laid in trenches / fixing on walls / poles or passing through GI pipe including connecting up with suaitable lugs, nuts and bolts wherever required and testing complete all as specified. |
| 197 | Supply and fix cable gland double compression type, weather proof for 4Core 16Sqmm armoured cable complete all as specifed and directed by Enginner-in-Charge. |
| 198 | Taking out old unserviceable cable, LT 1100V 10Sqmm 2 core from the trench after taking necessary shutdown from the OH LT supply and making good the disturbed surfaces as per existing complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
