Military Engineer Services-MES has published Tender For Roof Treatment Of Certain Md Accommodation Along With Provision Of Aluminium Partition At Nagrota Mil Stn Under Ge Nagrota.. Submission Date for this Tender is 30-11-2023. Shed Construction Tenders in nagrota Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-11-2023 |
| Sl. No. | Item Description |
| 1 | Taking down existing old tarfelt, bituminous compoundincluding cleaning & removing debris to a distance exc 500 m n.exc.1.5Km, complete all as specified and directed. |
| 2 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC shall be measured and paid separately. |
| 3 | Supplied only for Integral water proofing compound. |
| 4 | M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces |
| 5 | M&L forApplying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm. |
| 6 | M&L forOne layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing Note:- (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mmand 75 mm shouldbe made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). (iv) S&F of APP based polimeric membrane of approved manufacturer will belaid/fixedby authorised person of the same manufacturers units as per relevent IS. |
| 7 | Applying one coat of aluminium paint on top of APP membrane. |
| 8 | S&F 110mm dia PVC pipe (Type A) single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs. |
| 9 | S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100/110 mm bore |
| 10 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc Exc 250 and n exc 500 ltr. |
| 11 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500 and n exc 1000 ltr. |
| 12 | Demolition of Concrete (Unreinforced) of any description and in anypositionnot otherwise specifically provided for complete all as specified and directed. |
| 13 | M&L for PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | S & F in repairs, 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms. Make : PRAYAG (Standard range) or equivalent as approved |
| 15 | Taking down steel tubing and connections includingremoving from siteof 15mm borepipe complete all as specified and directed by Engineer-in-charge. |
| 16 | All as per item No 15 above but 20mm bore. |
| 17 | S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 18 | All as per item No 17 above but 20mm bore |
| 19 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 250 and n exc 500 ltr. |
| 20 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500and n exc 1000 ltr. |
| 21 | S&F in repairs to rotational moulded vertical water storage tanks three layer white in colour with closed tops (cylinderical ) hoisted and fixed in position 1000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as directed. |
| 22 | S&F in repairs to Rotational moulded polyethylene (three layer) water storage tanks three layer white in colour (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres incl disconnecting and refixing the existing GI fitting and pipe complete all as directed. |
| 23 | S&F of aluminium power coated shutters for cubboard and office cabinet work with necesarry opening, aluminium section weighing not less than 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips, powder coated aluminium snap beading screws etc complete allspecified and directed. |
| 24 | S&F for sheet glass 5.50 mmthickordinary qualityandglazing with rubber beading in squares exc 0.5Sqm in each pane complete all specified as specified and directed |
| 25 | S & F forPVCsheet of 18mm thick coloured/pattern (colour/pattern approved by GE) for office cabinet, cupboard shelf / partition/ frame / shutter work including PVC beading on edges of sheet and fixing with aluminium frame/shutter/mild steel section required as per site including jointing cleats on floor/shutter,PVC beadingjoint with solvent adhesive etc complete as per direction of Engr-in-charge, manufacture"s specification. |
| 26 | S F framed work as in frame work in cubboard and office work station of angle or other section with gusset plates, rails, braces etc complete drilling to be prepared for either hooks and hinges or cleat and fixing complete all as specified and as directed. |
| 27 | M & L for two coats of synthetic enamel paint over a coat of red oxide primer of any descriptionexc 10 cmin width or girth on new surface of steel complete all as specified and as directed. |
| 28 | Note:- Schedule of credit Rs. 12,295.00will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
