Tender For Special Repairs To Bldg No. P-77/A And P-48 (Bn Mag) At Solan Mil Station Under Ge Kasauli., solan-Himachal Pradesh

Tender For Special Repairs To Bldg No. P-77 / A And P-48 ( Bn Mag ) At Solan Mil Station Under Ge Kasauli.; 2 Dismantling Plain Or Corrugated Steel Sheeting Any Guage Thickness Incl Pgi, Cgi, Nainital Pattern As In Roof Covering Complete All As Specified. 3 S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Ridges Etc. Fixed All As Per ManufacturesS Instructions And Fixed With Self Thread Making Steel Screws Of Length Not Less Than 50Mm, All As Specified & Directed By Engr-In-Charge. 4 Same As Item No 2.00, Above But Plain Steel Sheet As In Roof Covering / Cladding To Wall, Ridges, Flashing, Eaves Board Valley Gutter Of Any Shape, Cut To Designed Shape ( Jhhallar ) Etc All As Specified. 5 Dismantling Timber Scantling Un Framed Work In Fillets, Rails, Posts, Rafters, Purlins, Etc. Under 40 Sq. Cm In Section In Any Position, Complete All As Spd. 6 S&F Mild Steel Work In Tubular Trusses Or Frame Work Including U Curve Shaped Pipes, Special Shape Washer Etc., As In Main And Cross Beams, Pillars, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Ladders; Staging; Railings Etc, Complete Using Erwor Induction Butt Welded Type Conforming To Is 1161-1979 Grade St. 240, Complete All As Specified And Directed. 7 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For. 8 S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required: Hooks ( Stay ) , Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165 9 S&F Framed Work As In Doors Or Gates, Any Object Stand Of Angle, Tubular Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering, Doors Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings ( Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides ) And Hanging; Also Fastening And Fixing Complete Fe -290 Gde E-165 10 Dismantling Of Water Tanks Exc 500 Ltrs Capacity But Not Exc 1000 Ltr Capicity And Removal At Site 11 S&F Rotational Moulded Pvc, Triple Layered, Water Storage Tanks Of Capacity 1000 Litre ( Cylindrical Vertical With Closed Top ) , Isi Marked, Hoisted And Fixed In Position, With & Including All Fittings Such As Gi Tank Nipple ( Inlet & Outlet ) Etc. But Excluding Connection Of Ball Valve, Over Drain Pipecomplete All As Specified And Directed. 12 S&F Ball Brass Valve 20Mm Dia, High Pressure, With Polythene Float And Fly Nut Complete, Screwed For Iron Pipe Or Brass Ferrule Complete All As Specified And As Directed. 13 S&F, In Repair, Gun Metal, Globe Or Gates Valves, With Iron Wheel Head, Screwed Down, High Pressure, Heavy Duty, Isi Marked, Screwed Both Ends For Iron Pipe Or For Union Of 20 Mm Bor Dia, Including Taking Down Old & Removal, Complete All As Specied And Directed. 14 S&F, In Repair, Gun Metal, Globe Or Gates Valves, With Iron Wheel Head, Screwed Down, High Pressure, Heavy Duty, Isi Marked, Screwed Both Ends For Iron Pipe Or For Union Of 15 Mm Bor Dia, Including Taking Down Old & Removal, Complete All As Specied And Directed. 15 Demolition Of Reinforced Cement Concrete Of Any Description In Any Position As In Chajja / Shelves, Rcc Tank, Kitchen Chimney Etc., Including Removal Taken To Any Lead Of Rubbish Outside Mod Land, Complete All As Specified. 16 M&L For Rcc 1:2:4 In Slabs Supported On Walls, Beams, Deck Slabs And In Shelves ( As At Kitchen, Whb, Sink Etc ) And The Like, Incl Necessary Formwork, Complete All As Spd. 17 Material And Labour For Precast Reinforced Cement Concrete ( 1:2:4 ) Type B-1 Using 20Mm Graded Crushedstone Aggregate As In Cover Slabs Of Manholes, Gully Traps Etcset In Cement Mortar ( 1:4 ) Complete All As Specified And Directed. 18 S&F Mild Steel Deformed Or Twisted Bars 10Mm Dia Cut To Length, Bent To Shape As Required And Binding With Anealed Wire Not Less Than 0.9Mm Dia Complete. 19 Dismantling Floor, Hearth Or Wall Tiling, Terrazzo Toping / Dado, Including Cement Mortar Bedding / Backing And Removing Rubbish Off The Premises Of Mod Land, Including Preparation Of Dismantled Surface Area To Receive Backing Coat / Bedding Layer For Tiles, Complete All As Specified And Directed. 20 M&L For Glazed Ceramic Coloured Tiles ( 450X300x7mm ) Thick As In Verticalsurfaces Such As Skirting / Dado Etc Set & Jointed In Neat Cement Slurry & Pointed In White Or Coloured Cement To Match And 10Mm Thick Rendering On Wall In Cm 1:4 Complete. 21 S&F For Non Skid Coloured Ceramic Joint Free Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors, Skirting Etc Set And Jointed Inneat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And Directed. 22 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors Aprons Etc, Laid Beded And Pointed In Any Mortar. 23 M&L For Granite ( Of Any Type ) Work 18-20Mm Thick ( Table Rubbed And Polished ) For Wall Lining ( Veneering To Wall ) 12Mm Thick In Cement Mortar ( 1:3 ) And Pointing With White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Incl Cutting, Waste, Full Rounded Off Corner / Edges, Rubbing Andmirror Polshing To Achieve The Desired Granite Finish Etc Complete All As Spd. 24 M&L For Roughening Surface Of Old Concrete By Picking, Sweeping Clean And Washing Down With Water To Remove Dustand Brushing Neat Cement Slurry With 3.0 Kg Of Cement Per Sqm. Complete All As Specified And Directed. 25 M&L For Screed Bed Or Beding Layer Of Morter 20Mm Thick In Cement Morter 1:6 For Laying Floor Finishes To Receiving The Kota Stone Complete All As Specified And Directed. 26 M&L For Machine Cut Kota Stone Slab Flooring 20-25 Mm Thick Over Cement Screed Base Laid And Jointed With Gray Cement Slurry Mixed Eith Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified And Directed. 27 Material And Labour, Coloured Chequered Cement Concrete Tiles 200X200x25mm Or 300X300x25mm Thick, Factory Made, Isi Marked ( Is 13801-1993 ) , With Grey Cement &Pigment, Laid With Neat Cement Slurry As In Path, Pavement , Floors, Etc. @ 3Kg / Sqm Over & Including 20Mm Thick Screed Bed Of Cement Mortar ( 1:6 ) , Pointed In White Cement With Matching Colour Pigment, Complete All As Specified And Directed. 28 M&L Machine Pressed Precast Concrete Interlocking Paver Block Of Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness M-40 Grade With Grey Cement & Pigment. 29 M & L Sand Filling Under Interlocking Coloured Paver Block Average 25Mm Thick Complete All As Specified And As Directed. 30 M& L For Providing, Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate ) In Drain Both Side Kerbs Or Mud Stops, Rounded Or Chamfered On Edgescomplete All As Specified 31 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frame ) Area Exc. 1.50Sqm & Not Exc 4.00 Sqm Each And Removing From Site Incl Making Good The Disturbed Surfaces Complete All As Specified & Directed By Engineer-In-Charge. 32 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frame ) Area Not Exc. 1.5Sqm Each And Removing From Site Incl Making Good The Disturbed Surfaces Complete All As Specified & Directed By Engineer-In-Charge. 33 S&F 125 X 60Mm Pressed Steel Frames 1.25Mm Thick For Doors, Windows With One Or More Rebates Incl Necessary Fixing Hinges, Lugs, Hinges Lock, Strike Plate, Hold Fasts Etc. 34 M&L For Providing Cement Concrete 1:3:6 Type C-1 ( Using 20 Mm Graded Crushed Stone Aggregate ) As In Filling Chowkhats, Plinth Courses, Copings, Kneelers, Apex Stones, Bed Plates Etc Includingnecessaryform Work Complete All As Specified And Directed. 35 S&F Factory Made Plain, Framed, Panelled Shutters, 35Mm Thick Of 2Nd Class Hard Wood ( Hollock ) With Lock Rail And Panels Of 9Mm Thick Commercial Ply Or 12Mm Thick Vaneered Particle Board With Commercial Veneered On Both Sides, Incl Priming Coat, Duly Hammer Marked. The Size Of Rail & Style Shall Be As Per Is 1003 Part-1 Kiln Seasoned And Chemically Pressure Treated Incl One Coat Of Pink Primer Complete All As Specified & Directed By Engineer-In-Charge. 36 M&L For 30 To 35 Mm Thick Glazed And Skelton Shutter Of 1St Class Softwood ( Hollock ) Open Rebated And Prepared To Receive Glass, Gauge Etc Divided Into Squares ( 08 Nos ) With Plain Chamfered Or Rounded Mitred And Rebated Sash Bars Any Number, Edges Of Framing Plain Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc, Supplied And Fitted To Chowkats All As Specified. 37 S&F Stainless Steel Hinges, Medium Weight Cold Rolled Mold Steel, Size 100Mm, Isi Marked, Complete All As Specified And Directed . 38 S&F Aluminium Alloy, Anodised Sliding Door Bolts 300 Mm Long With Hasp And Staple ( Bolt Type ) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy, Isi Marked, Complete All As Specified And Directed. 39 S&F, Aluminium Anodised Barrel Tower Bolts Of Extruded Section, 200Mm, Isi Marked, Complete All As Specified And Directed . 40 S&F, Aluminium Anodised Barrel Tower Bolts Of Extruded Section, 150Mm, Isi Marked, Complete All As Specified And Directed . 41 S&F, Extruded Aluminium Alloy Handles With Plates, Fabricated Type, Anodised 150 Mm Size, Isi Marked, Complete All As Specified And Directed . 42 S&F Hasp And Staple Size Of 100Mm, Safety Type, Brass With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Isi Marked, Complete All As Specified And Directed. 43 S&F In Repairs Hydraulic Door Closer Of Aluminium Fixed To Door Shutters Of Designation 2 All As Specified. 44 S&F Door Seal Strip With Plastic Beading, Fixed In Repairs, Complete All As Specified And Directed By Engineer-In-Charge, Complete All As Specified And Directed. 45 S&F Double Leagedfloor Door Stopper Of Over All Length Of Cover Plate 140 Mmof Aluminium Alloy Body And Tongue Anodizedwith Hard Drawn Steel Springfixed In Floorall As Specified 46 S&F 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Brass Polished, Bright Finished, Fixed In Repair. 47 S&F Factory Made Box Type Steel Window With Side Hung Shutters ( Carrying Wire Mesh ) With Pintle Hinges & 2 Nos 150Mm Mild Steel Tower Bolts To Each Shutter, Steel Handle And With Glazing Bars, Including Flat Iron 50 X 6 Mm For Cover Gaps And Flat Iron 12 X 3 Mm For Securing Wire Mesh, Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer Complete All As Specified. 48 -Ditto-As Item No 46.00, But Without Glazing Bars Of Shutter ( Carrying Glass ) . 49 S&F Factory Made Box Type Steel Section Ventilator With Top / Centre Hung Shutter Double Leaf Shutter For Glazing And Wire Gauze With Pintle Hinges & 01 No 150Mm Mild Steel Tower Bolt, Hinges, Steel Peg Stay, Steel Handle To Each Shutter, Steel Handle Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer Complete All As Specified. 50 S&F Framed Work For Grills, Gratings Etc With Ends Of Bar Shouldered And For Riveted Or Welded Framed Work Guard Bars And Similar Work Conforming To Fe.290.Gde-E-165 All As Specified. 51 S&F Stainless Steel Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And 1.40Mmaparture Fixed With Tinned Tackes Or Stainless Steel Wire Staples And Including Fixing With Beads ( Iron / Wood Flats ) Supplied With Joinery When Fixed In Panels Of Joinery. , Complete All As Specified And Directed.Or . 52 S&F Sheet Glass 4Mm Thick Ordinary Quality And Glazing With Oil Putty Andsecuring Pins N.Exc 0.50 Sqm Each Panes. 53 M&L For Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer On New Steel Surface Over 10Cm Width Or Girth Including Preparation. 54 M&L For Preparation Of New Wooden Surfaces & Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer After Complete Filling, All As Specified. 55 M & L For Preparation Of Old Wood Surface ( Wooden Scantling, Rafter, Purlins Etc ) Of Any Description Not Otherwise Described, Over 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paintcomplete All As Specified And Directed By Engineer-In-Charge. 56 M&L For Preparation Of Plastered Or Unplastered Old Decorated Surfaces Of Ceiling Etc. Incl Pillasters And Cornices Etc. Incl Brooming Down Of Steel Wire Brushing Scrapping Down Smoke Soot Moulds Moss And Efflorescence Salts And Trading Oil And Grease Spot, Washing Etc. And Applying Two Coat Of White Lime Wash Complete All As Specified. 57 M&L For Preparation Of Plastered Or Unplastered Old Decorated Surfaces Of Walls Incl Cornices, Chajjas, Sun Shadesetc. By Applying Two Coat Of Cement Base Paintwith And Incl Curing The Surfaces And Curing The Same After Application Of Cement Base Paint ( Tint As Approved By Ge ) Including Sand Paper Or Iron Patti / Flat Complete All As Specified. 58 S&F Stainless Steel ( Ss ) 20 Mm Dia Curtain Rod, Bright Finish, Including Set Of Fixing Brackets ( Wall & End ) , Fixed To Wall In Repairs, With Finols / Finnels, Connected Accessaries, Rubber Packing, Required Screws And Rawal Plugs Fixed In Repair, Complete All As Specified And Directed. 59 Demolition Of Brick / Stone Work Built In Cement Mortar Including All Quoins, Walls, Arches, Pillars Etc All As Specified. 60 M&L For Walling Of Random Rubble Stone Masonary, Brought Up To Courses, Well Bonded, Bedded And Solidly Hearted Built In Cement Morter 1:6 Including Racking Or Cutting Out Joints Complete All As Specidfied And Directed By Engr-In- Charge. 61 All As Per Item No. 59.00 Above But Except Stone Complete All As Specified And As Directed. 62 M&L For Providing Cements 1:3:6 Type C1 Using 20Mm Graded Aggregate As In Plinth Course, String Courses, Lacing Courses, Parapets And Rainling Up To 60 Cm Height, Copings, Kneelers, Apes Stones, Bed Plates, Water Troughts And The Like Including Weathering, Slightly Rounded Or Champfered Angles And Throating Incl Use And Waste Of Necessary Form Work Complete All As Spd. Complete All As Specidfied And Directed By Engr-In- Charge. 63 M&L For Raised Pointing To Random Or Polygonel Rubble, Uncoursed Or Brought Up To Courses In Cm 1:4Complete All As Specidfied And Directed By Engr-In- Charge. 64 M&L For Providing Cast-In-Situ Of Plan Cement Concrete ( Bond Stone ) Type C-1 ( 1:3:6 ) Using 20Mm Graded Crushed Stone Aggregate And Set In Cement Morter 1:6 Between Stone Masonary, Complete All As Specidfied And Directed By Engr-In- Charge. 65 Pvc ( Swr ) Pipes 110Mm Dia As In Weep Holes In Retaining Wallcomplete All As Specidfied And Directed By Engr-In- Charge. 66 M&L For Brick Work Sub Class “B” Bricks Straight Or Curveted In Plan Exc. 6Mtr Mean Radius With Old Size Bricks Iin Cm 1:6 All As Specified. 67 Same As Item No 65.00, Above But Except Bricks All As Specified. 68 Taking Down Cement Plaster On Brick Or Concrete Surfacesincluding Racking Outjoints Hacking For Keys Scrubbing Down With Water Etc. 69 M&Lfor Rendering 15Mm Thick In Cement Mortar 1:4 As On Brick / Concrete Surfaces For Two Storey Bldg, Finished The Surface Even & Smooth W / O Using Extra Cement Incl. Necessary Scafolding All As Specified. 70 M&L For Preparation Of New Plastered Or Unplastered Surfaces Of Walls Incl Cornices, Chajjas, Sun Shadesetc. And Applying Two Coat Of Cement Base Paint, Complete All As Specified. 71 M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement ( Internal Surfaces ) , Complete All As Specified And Directed By Engr-In- Charge. 72 M&Lfor Preparation Of New Decorated Plastered Surfaces Of Walls By Applying Two Coat Of Oil Bound Distemper, Complete All As Specified And Directed By Engineer-In-Charge. 73 M&L For 3Mm Thick Wall Care Putty ( Laid In 2 Layers / Coats ) On Wall New Surface For Making Complete Smooth Surface Using Sand Paper, Complete All As Specied And Directed. 74 Taking Up Or Down Steel Water Tubing And Connection From Wall, Ceiling, And Floors Etc Including Removal To Store Of 15Mm Bore All As Specified. 75 Taking Up Or Down Steel Water Tubing And Connection From Wall, Ceiling, And Floors Etc Including Removal To Store Of 20Mm Bore All As Specified. 76 M&L For Gi Tubing 15Mm Bore Fixed To Walls, Ceilings Or Laid In Floors Medium Grade All As Specified. 77 M&L For Gi Tubing 20Mm Bore Fixed To Walls, Ceilings Or Laid In Floors Medium Grade All As Specified. 78 Re-Fixing Steel Water Tubing Of 15 Mm Bore, With All Fittings At New Or Old Position, Laid In Floor Along Wall Or At Ceiling, Complete All As Specified. 79 Re-Fixing Steel Water Tubing Of 20 Mm Bore, With All Fittings At New Or Old Position, Laid In Floor Along Wall Or At Ceiling, Complete All As Specified. 80 Dismantlingpvc Drain Or Vent Pipe Of Any Description In Any Position Including Bends Branch Pieces Etc. 81 S&F 75Mm Dia Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Including Clamps As Required Complete All As Specified. 82 S&F 75Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvant Cement Incl Necessary Pcc & Form Work As Required Complete All As Specified. 83 S&F 75Mm Dia Pvc ( Swr ) Bends With Rubber Ring Joints Fixed As Required Complete All As Specified. 84 S&F 75Mm Dia Pvc ( Swr ) Junction Single, ( Single T ) , Equal Or Un Equal Including Jointing With Solvant Cement As Required Complete All As Specified. 85 S&F In Repair, Stack Clamps Out Of 50 Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall Or Roof 86 S&F 110Mm Dia Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Wall Excluding Clamps As Required Complete All As Specified. 87 S&F 110 Mm Dia Pvc ( Swr ) Bends With Rubber Ring Joints Fixed As Required Complete All As Specified. 88 S&F 15Mm Bore Bib Taps Long Body ( Fency Type ) Brasscast Copper Alloy ( Cp ) With Crutch Or Butterfly Handles, Screwed Down, Screwed For Iron Pipes Or For Brass Ferrules And Fixed In Repairs. 89 S&F Angle Valves, Cast Copper Alloy Cp 15Mm, Screwed Down, High Pressure, With Crutch Orbutterflyandle, Screwed Bothends For Iron Pipe Or For Unions And Fixed In Repair. 90 S&F Central Hole Basin Mixer, Fancy Type, Whb / Bathroom, Kitchen , Without Poupwaste System, Cast Copper Alloy, Chromium Plated, Screwed For Iron Pipe Or For Union, Suitable For 15Mm Bore Pipe, Fixed As In Repairs Complete All As Specified And Directed. 91 S&F, Counter-Type Wash Hand Basin, Vitreous China, White, Fency Decorative Type, Size 550Mm X 400Mm Fixed Over Rcc Slab Incliding Cp Waste Coupling, Waste Pipe But Exclusive Of Pillar Tap / Mixer, Pvc Connection, Fixed As In Repairs Complete All As Specified. 92 S&F In Repair Stainless Steel Sink, 1.00Mm Thick For Kitchen, With Sink Waste Coupling, 32 Mm, Hard Pvc Flexible Waste Pipe, Washers, Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union Etc., Overall Size 495Mm X 420Mm With Bowl Size 410Mm X330mm X 160Mm Complete. 93 S&F Towel Rail 600 Mm Long, 20 Mm Dia, ‘D’ Type, Chromium Plated, Fixedto Walls With Screws And Plastic Cleats, Fixed In Repairs, Complete All As Specified. 94 S&F Pvc Connections 600Mm Long Including Back Nuts And Washers Fixed To 15 Mm Bore Of Pipe Fixed In Repairs. 95 S&F 15Mm Dia Pvc Connection With Ptmt Nut, Of Length 450Mm, Fixed As In Repairs Complete All As Specified And Directed. 96 S&F In Repairs600mmx450mm Bevelled Edge Looking Mirror Of Selected Quality Glass, Mounted On6mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers. 97 S&F, Grating Doom ( Openable Type ) 100Mm Dia Of Ptmt With Or Without Waste Hole Both. ( Minimum Weight 25 Gms ) As In Repair. 98 S&F Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Fixed In Repair 99 S&F In Repair, Soap Dish Size 160X160x90mm, Vitreous China White, Fixed To Plugs With Chromium Plated Brass Screws, 100 S&F Stainless Steel Peg Set Of 6 Hooks Including Chromium Plated Brass Screws And Wooden / Plastic Cleats ( Minimum Weight 190Gms ) . 101 Demolition Of Cement Concrete ( Unreinforced ) As In Roofs, Floors ( Other Than Ground Floors ) , Beams, Staircases, Landing, Chajjas And Similar Suspended Work, Complete All As Specified And Directed. 102 Material And Labour For 40Mm Thick Plain Cement Concrete 1:2:4 Type B-0 ( Using 12.5Mm Graded Stone Aggregate ) As In Levelling Courses Laid And Compacted In Slope In Floor, Chajjas Etc, Complete All As Specified And As Directed. 103 M&L Pcc 1:2:4 Type C2 Using 20Mm Graded Agg As In Surface Channel / Drains, Incl Necessary Formwork Etc All As Spd. 104 Extra For Foriming Fair Finished Drain As Channel Of Cement Concrete Using Extra Cement Including Forms Moulds Mitred / Stopped End Etc. 105 Demolition And Breaking Up To 150Mm Dia Drain / Sewer Pipes Below Ground Level ( Salt Glazed Stoneware, Ac Or Reinforced Concrete And Pvc ) Set In Cement Mortar Incl Pcc At Any Depth Complete All As Specified And As Directed. 106 S&F Reinforced Concrete Pipes, Class Np2 200Mm Dia Pipe Laid And Jointed Complete With Collars Per Length Of Pipe And Make Sewer Line Functional. 107 Concrete Bed To Drain Pipe With Pcc ( 1:4:8 ) , Type D-2, Using 40 Mm Graded Mechanically Crushed Stone Aggregates, Including Packing Under And Haunching Against Complete Surrounding Pipes With Concrete For Sgsw Pipe Of Bore 200 Mm After They Are Laid And Tested, Complete All As Specified And Directed By Engineer - In -Charge. 108 M&L For Pcc 1:5:10 Type E-2 As In Sub Base& In Foundation Concrete All As Specified . 109 Dismantling Walls Or Ceiling Boards ( Fibre, Plup Insulation Etc ) Or Insulation Boards / Slabs / Blankets Any Thickness Including Cover Fillets, Complete All As Specified And As Directed By Engr-In- Charge. 110 S&F In Repair Gi Metal Suspended Ceiling System Oreo Gi Lay In Plain Of 600 X 600X 0.5Mm ( Tegular ) Edge Tiles In Global White Colour To Be Laid On Strong 24Mm T-Section Flanges Colour White Having Rotary Stitching On The Main Runner With Web Height Of 38Mm. The Tiles Should Have Humidity Resistance Of 100% With Light Reflection Of 62%Note: ( I ) To Comprise Main Runner Spaced At 1200Mm Centres Securly Fixed To The Structural Soffit At 1200 Mm Maximum Centre. The First / Last Suspension System At The End Of Each Main Runner Should Not Be Greater Than 450Mm From The Adjacent Wall. Flush Fitting 1200 Mm Long Cross Tees To Be Interlocked Between Main Runners At 600 Mm Centre To Form 1200 X 600 Mm Module. Cut Cross Tees Longer Tahn 600Mm Require Independant Support. 600 X 600 Mm Module To Be Formed By Fitting 600Mm Long Flush Fitting Cross Tees Centrally Between The 1200Mm Cross Tees. Perimeter Trim To Be Wall Angles Of Size 3000 X 19 X 19Mm, Secured To Walls At 450Mm Maximum Centres ( Ii ) Suspension System Accessories Consisting Of Hlc Sleeve Anchor Fasterners Of Thread Size 6.5Mm X 25 / 5 With Soffit Cleat Made Of Galvanised Steel Of Size 27 X 37 X 25 X 1.6Mm And Level Clip In Dimensions Of 85X30x0.8Mm With 4Mm Gi Wire. 111 S&F Solid Pvc Wall Lining Including Of 5 Mm Thick Wood Grain Printed Pvc Sheet Single Side Prelaminated Inclusive Of Solvent Cement, Pvc Angle At Edges And Fixing At Site On Pvc Frame, Complete All As Specified. 112 S&F 5 To 15 Mm Thick Pvc Sheet Fillet Of Width 35 Mm Thick Wall Panelling Inclusive Of Fixing Of Wall To Make Pvc Frame, Complete And As Specified. 113 M&L In Repair, 17-18 Mm Thick, Hdhmr Board High Density, Water, Termite, Boer And Fungus Resistance, Laminated 0.90 Mm Thick Both Sides Fixed With Screws To Timber Frame Work As In Cupboard Shelves, Shutters, Bathroom Doors, Kitchen Cabinets Etc, Complete All As Specified And Directed By Engr-In-Charge. 114 Material & Labour Piano Hings, Mild Steel Bright Finish Width Of Flap 30Mm Fixed In Repair Includingtaking Out The Existing Complete All As Specified And Directed By Engineer-In-Charge. 115 Supply & Fixingmagnetic Catches 75 Mm Brass Body For Use In Cup Boards Of Kitchen, Ward Robes Etc. Fixed As In Repairs Complete All As Specified And Directed By Engineer-In-Charge. 116 S&F Brass Handles, Size Of Handle In 100 Mm, Cast Type, Polished Bright Complete All As Spd. 117 Dismantling Timber Scantling Un Framed Work40 Sq Cm And Over In Section In Any Position, Unframed Work Complete All As Spd. 118 S&F Mild Steel Work In Tubular Trusses ( Hollow Square / Rect. / Circular Pipe ) , Including U Curve Shaped Pipes, Special Shape Washer Etc., Complete Using Erwor Induction Butt Welded Type Conforming To Is 1161-1979 Grade St. 240, Complete All As Specified And Directed. 119 Taking Out Existing Earthings And M&L For Replacement Of Chemical Earthing ( Pipe In Pipe Technology ) Two B Class Is Mild Steel Pipe, One Inside The Other, Hot Dip Galvanised With 100 Micron Coating Outside And About 300 Micron Coating Inside Filled With High Conductive And Corrosion Resistant Crystalline Mixture Inside And Backfill Compound Around The Outer Electrode ) Outer Electrode Dia 72 To 80Mm And Inner Electrode Dia 35 To 40 Mm Both 10 Long, Incldg Making Earth Pit Of Size 4 X 4 And 11 Deep Fill The Entire Pit With Black Cotton Soil Or Normal Soil, Pour Enough Water So That Pit Is Full With Water, Leave It For Three Days So That Soil Soaks Up The Water, The Soil Level Has Goes Down, Again Top Up The Pit With Soil & Fill The Water. 120 Item No 118.00 Contd... :- After Two Or Three Days When The Pit Is Sturdy And Ready For Earthing Purpose, Install The Earthing Electrode As Per Installation Method As Below:- ( A ) Mix Backfill Compound Evenly With Soil. ( B ) Remove Plastic Sleeve Carefully From Electrode. ( C ) Place Naked Electrode At Centre Of Pit. ( D ) Start Refilling Empty Space Around Electrode With Backfill Compound In Layers. ( E ) Pour Some Water And Poke The Pit With A Long Wooden Rod To Allow Trapped Air To Escape. ( F ) Gradually Continue Refilling Process Till Electrode Is Buried In The Pit Up To The Green Patch Painted On The Top Portion Of Electrode. ( G ) Ensure That Pit Is Not Watery ( H ) Pack Electrode With Compound Nicely And Tightly, So That It Stands Firmly In Pit. ( J ) Pour A Few Buckets Of Water Around Pit. ( K ) Pour A Few Buckets Of Water Around In The Pit Everday For 10-15 Days For System To Set. ( L ) Connect The Earth Electrode With Equipments By 25Mm X 3Mm Aluminium Strip. ( M ) Earthing Test Point Terminal Block Made Of Gun Metal Size 150X100x50 Mm Drilled And Screwed Including 4 Nos 8 Mm Dia 40 Mm Long Hexagonal Head Bolts And Washers Duly Fixed On Walls With Fasteners 4 Nos. Note : ( A ) Earth Resistance Shall Not Be More Than 5 Ohm. ( B ) Aluminium Strip For Connections Shall Be Measured And Paid Separately. 121 M&L For Copper Strip 20X3.15 Mm With Saddles And Fixing Screws Etc. For Roof Conductors And Down Conductors Above Groundcomplete As Directed. 122 M&L For Air Termination , Single Pointed, Copper Rod 12 Mm Dia And 300 Mm Long Complete. 123 M&L For Test Point Terminal Block Made Of Gun Metal Or Phosphorus Bronze Size 75 X 75 X 25 Mm, Drilled And Screwed Including 3 Nos 8 Mm Dia 25 Mm Long Hex Head Screw Complete As Diected. 124 M&L For Pcc Type B2 1:2:4 ( 40 Mm Graded Aggregate ) In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars Boundary Pillars And Posts ( Including Caps And Basis ) 125 Taking Down Carefully Copper / Aimn Point Wiring ( Light, Fan / Point Socket Or Power ) ( Fittings Such As Switches Ceiling Roeses, Pendent, Regulators, Sockets Etc To Be Measured & Paid Seprately ) & Making Good To Disturbed Surface Of Walls / Floors Etc. 126 M&L Point Wiring Using Approved Colour Codingas Per Is With Stranded Copper Conductor Single Core Frlsh 1.5 Sqmm ( Nominal Area ) , Pvc Insulatedcable In And Incl Pvc Conduit ( Isi Marked ) Including Cutting Chiseling And Grouting Concealed Pvc Conduit Pipe, Tee, Elbow And Bend Etc.Andwith All Connecting Accessories Incl Mild Steel Sunken Boxes Suitable Formounting Switch / Sockets With Earth Dolly Duly Painted With Two Coats Of Anti Corrosive Paint Over A Coat Of Red Oxide Primer Incl Mounting Frame Over Cover Plate, Covered With 3Mm Thick Plastic Laminated Sheet, Incl Pvc Insulated Copper Conductor Frlsh 1.5 Sqmm ( Nominal Area ) Single Core Pvc Cable As Earth Continuity Conductor To Common Earth And Connecting To Earth Dolly Complete All As Specified.Note : Switch / Sockets Shall Be Measured And Paid For Separately :- 127 One Light / Fan Pointcontrolled By One Switch 128 One Switch Socket Outlet 3 Pin, 5 Amp On The Independent Board 129 One Switch Socket Outlet 3 Pin, 5 Amp On Same Board 130 All As Per Item No 124.00 Here-In-Before Butwith 2 Single Core Pvc Insulated Frlsh And Sheathed Copper Conductor Of Size 2.5 Sqmm In And Including Pvc Conduit ( Isi Marked ) Including Cutting Chiseling And Grouting Concealed Pvc Conduit Pipe, Tee, Elbow And Bend Etc.Andwith All Connecting Accessories With 2.5 Sqmm Pvc Insulated Frlsh Copper Conductor As Earth Wire And Connecting To Common Earth Dolly For 6 Pin 16 Amp Socket Outlet On The Independent Board.Using 2.5 Sqmm Copper Cableincl Pvc Insulated Copeer Conductor 1.5 Sqmm As Continuedearth Wire . 131 All As Per Item No 124.00 Here-In-Before Butwith 2 Single Core Pvc Insulated Frlsh And Sheathed Copper Conductor Of Size 4.0 Sqmm In And Including Pvc Conduit ( Isi Marked ) Including Cutting Chiseling And Grouting Concealed Pvc Conduit Pipe, Tee, Elbow And Bend Etc.Andwith All Connecting Accessories With 4.0 Sqmm Pvc Insulated Frlsh Copper Conductor As Earth Wire And Connecting To Common Earth Dolly For 6 Pin 16 Amp Socket Outlet On The Independent Board. 132 S&F Lamp Holder, Pvcinsulated Body, With Back Plate Suitablefor Batten Fitting Complete All As Specified. 133 M& L Switch Piano, Flush Type, Single Pole 1 Way 6 Amp, Isi Marked Complete All As Specified. 134 S&F Switch Pianoflush Type, Single Pole 1 Way 16 Amp Complete All As Specified. 135 M& L Socket 5 Pin 6 Amp Piano Flush Type, Isi Marke Complete All As Specified. 136 S&F Socket Out Let 2 In One 6 Pin 6 & 16 Amp Complete All As Specified. 137 S&F Ceiling Rose, 3 Phase / Pvc / Polycorbonate, Isolate Bady Complete All As Specified. 138 S&F Led Lamp 9Watt Capacity B22 Polycorbonate, Isolate Body Complete All As Specified 139 Supply And Fixingaluminium Housing Led 20 Watt Inverter Batten With Inbuilt Li Ion Battery For Power Backup Of 2 To 3 Hrscompleteall As Specified And Directed. 140 Supply And Fixing Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed By Engr-In-Charge. 141 S & F Led Light Fitting 1X9w / 1X10wbulkhead Luminaires Including Led Light Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size All As Specified And Directed By Engr-In-Charge. 142 S & Fled Building Security Light 30 Wattled Inverter Rtcinbuilt For Autoon / Auto Offand Must Have Dimming Facility From 10 To 100% Of Rated Wattage As Peruser Defined Timelinemade Pressure Die Cast Housing With Individuals Leds & Lens With Modular Secondary Optics And Ip65 Protection With Electronics Driver And Copper Conductor 3 Core Of 0.7 Sqmm From Ceiling Rose To Security Light Withbracket Made Out Of Gi Light Grade Pipe Of 32 Mm Dia 1.5 Mtr Long Bend To An Angle Of 120 Degree With Fixing Arrangements On Wallcomplete All As In Repair. 143 S&F Sheet Metal Enclosure With Double Door For Dbs Conforms To Is:8623.Iii , Ip:43 Protection, Shrouded Neutral Bar And Cement Spill Protector, 4 Way, 240 Voltspnincl Taking Down Old One Complete All As Specified. 144 S&F Sheet Metal Enclosure With Double Door For Dbs Conforms To Is:8623.Iii , Ip:43 Protection, Shrouded Neutral Bar And Cement Spill Protector, 8 Way, 240 Voltspnincl Taking Down Old One Complete All As Specified. 145 S&F Sheet Metal Enclosure With Double Door For Dbs Conforms To Is:8623.Iii , Ip:43 Protection, Shrouded Neutral Bar And Cement Spill Protector, 4 Way, 415 Volttpnincl Taking Down Old One Complete All As Specified And Directed By Engineer - In - Charge. . 146 Supply & Fixing Mcb, Dp ( Double Pole ) , Ac, 240 Volts, B Series Capacity 40 Amps To 63 Amps10ka And Making Connections Complete All As Specified & Directed. Complete All As Specified & Directed By Engr - In - Charge. 147 Supply & Fix Isolator 4 Pole C Series 63 Amps Capacity Ac 415 V, 10Ka Complete All As Specified And Directed By Engineer - In - Charge. 148 Supply And Fixing Mcb, Sp, Ac, 240 Volts B Series Capacity Of 06 To 32 Amps, 10Ka And Making Connections Complete All As Specified & Directed. Complete All As Specified & Directed By Engr - In - Charge. 149 M&L For Submain Wiring With 2 Single Corepvc Insulated Frlsh Cable 6 Sqmm Copper Conductor Pvc Sheathed In And Including Rigid Pvc Concealedconduit Heavy Duty Of Suitable Size Incl Taking Down Old One Cutting Chiseling Of Wall And Making Good To Disturbed Surface Of Walls / Floor Etc With Plastering Painting Etc So As To Match With The Existing Finishes, Drawn With 6 Sqmm Pvc Insulated Frlshcopper Conductor Cable For Earth Wire Fixed With Shaddle And Connectingto Common Earth Teriminals Complete All As Specified. 150 S & F Single Pole And Neutral Sheet Metal Enclosure With A 2 Pin And Earth Plug And Socket Complete With One Single Pole Mcb 20 Amps. 151 Supply And Fix Electric Water Heater, Storage Type Steel Body With Copper Inner Tank And Heating Element Upto 2 Kw Capacity 25 Litre, Bee 5 Star Rated Complete With All Accessories Such As Safety Valve, Hermostate, Nrv, Connection Piece Etc.Andincluding Taking Down Unserviceable And Deposit To E / M Store. Note:- Geyser Will Be Fitted With Fastners-04 Nos Including Bolts Washers Etc And Making Good Disturbed Surface Complete All As Specified And Directed By Engr-In-Charge. 152 Supply And Fix Exhaust Fan, Steel Body Ac Single Phase. 230V Of Size 300Mm Sweep, 900 Rpm, With, Blades, Frame And Louversshutters, Mounting On Walls With Holding Down Bolts, Nuts, Washers With Cutting Holes Into Or Through Stone / Brick Walls For Fixing Of Exhaust Fanincluding Making Good The Cutting And Matching The Surface With Existing Surfaces And Connection Of Flexible Copper Conductor Cable Three Coreceiling Rose To Fan And Testing Includingtaking Down Unserviceable And Depositing To E / M Store Complete All As Specified And Directed By Engr-In-Charge. 153 M&L Earthing Complete Withand Including Galvanised Steel Earth Plate Electrode 60 Cmx 60Cm X 6 Mm Thick Surrounded By Mixtureof Charcoal And Salt In Alternate Layers , Buried Directly In Ground Vertically In A Pit Of Depth Not Less Than 2.25 Meter Deep Below Ground Level With Top As Of The Plate At A Depth Of Not Less Than 1.5 Mtrs Below Normal Ground Level Connected To Galvanized Iron Wire 4 Mmas Earthing Lead By Means Of Bolts , Nuts, Check Nuts And Washers Of Galvanised Iron Or Steel Earth Wire Protected By Galvanised Steel Pipe 20 Mm Bore ( Light Grade ) And Connected To Main Switch Or Main Control Board All As Shown In Electrical Plate No. 3Of Ssr - 2009 ( Pt I ) & Including Necessary Excavation And Earth Work In Hard Anddense Surface. The Rate Also Include Charcoal And Salt In Alternate Layers, 20 Mm Bore Gi Pipe ( Light Grade ) For Watering , Protection Pipe Funnel, Wire Mesh , Pcc 1:2:4 Type B1 Chamber In Cement Concrete , 50 Mm Thick Precast Rcc M-25 ( Normalmix ) Cover Duly Reinforced With Xpm ( Weight Not Less Than 3 Kg / Sqm ) And Ci Frame Etc , And Including Provision Of Test Point , Connecting To Test Point And Testing On Completion Etc, Complete All As Specified. Note :- The Unit Rate Include Earthing Lead And Protection Pipe Upto 6.5 Metre From Top Of Earth Plate. 154 Supply And Fixing In Repair / Replacement To Existing Led Luminaire 600 Mm X 600 Mm, 35 / 36 Watt, 220 V Ac Recessed / Surface Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed By Engr-In-Charge. 155 Supply, Laying, Jointing And Testing Ofxlpe Insulated, Armoured, Heavy Duty Lt Cable 1100 Volts Gradewith Aluminium Conductor Laid In Trenches, On Poles, Through Pipes, Fixed To Walls Etc Cross Sectional Area 16 Sqmm 4 Core, Complete, All As Specified And Directed. 156 Excavating In Trenches, N.Exc 1.5 M Wide And N. Exc 1.5 M In Depth Forlaying Cable , Pipe And Getting Out 157 Returning , Filling In, Including Spearding, Levelling , Wateing And Well Ramming In Layers Not Exc 25 Cm 158 Removing Excavated Material N Exc 50 M And Depositing Whee Directed At A Level N Exc 1.5 M Above The Starting Point 159 Supply And Laying Reiforced Precast Cable Cover Class Lv Type I Flat Size 250Mmmx 150Mm X40 Mm For The Protection Of Cable Laid Flat Dry Across The Cable Complete All As Specified. 160 Supply And Lay Dry Sand Cushioning To Under Ground Electric Cable On Layer Of8cm Thick Before Laying The Cable And Second Layer Of 15Cm Thick After Laying The Cable, Complete, All As Specified In Clause 19.75 Of M.E.S Schedule Part-I ( 2009 ) And Directed. 161 S&F Post Top Lantern Led Type 20 Watt 230 Volts Ac Outdoor Type With Decorative Post Top For 360 Degree Indirect Light Ip 65 Protection With Impact And Corrosion Resistant Complete With Driver And Lamp Complete All As Specified. 162 Supply, Laying, Jointing And Testing Ofxlpe Insulated, Armoured, Heavy Duty Lt Cable 1100 Volts Gradewith Aluminium Conductor Laid In Trenches, On Poles, Through Pipes, Fixed To Walls Etc Cross Sectional Area 10 Sqmm 2 Core, Complete, All As Specified And Directed. 163 Supply And Laying Hdpe Pipe 40 Mm Dia With All Fittings Laid In Trenches Or Fixed On Walls Etc Complete All As Specified And Directed. 164 Supply And Laying Gi Tube, Light Grade, Galvanised 40 Mm Dia With All Fittings Laid In Trenches Or Fixed On Walls Etc Complete All As Specified And Directed. 165 Amount Of Credit Of Rs. 221750.20 For Retrived Old Material As Mentioned In Schedule A Section-Ii Of Tender Document In Pdf Form, Will Be Deducted Offline While Acceptence Of Tender.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	07-Nov-2023	CERTAIN AMENDMENTS TO CRITICAL DATES	Date	18-12-2023
2	04-Dec-2023	CERTAIN AMENDMENTS TO CRITICAL DATE	Date	11-01-2024
3	03-Jan-2024	AMENDMENTS TO CRITICAL DATES	Date	24-01-2024
4	24-Jan-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	31-01-2024

INR 500 /-

INR 89340.0 /-

INR 44.67 Lakhs /-

Name of Work: SPECIAL REPAIRS TO BLDG NO. P-77/A & P-48 (BN MAG) AT SOLAN MIL STN UNDER GE KASAULI.

Sl. No.	Item Description
1	Schedule "A" Section - I
2	Dismantling plain or corrugated steel sheeting any guage thickness incl PGI, CGI, Nainital pattern as in roof covering complete all as specified.
3	S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures"s instructions and fixed with self thread making steel screws of length not less than 50mm, all as specified & directed by Engr-in-Charge.
4	Same as item No 2.00, above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified.
5	Dismantling timber scantling un framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position, complete all as spd.
6	S&F Mild steel work in tubular trusses or frame work including "U" curve shaped pipes, special shape washer etc.,as in main and cross beams, Pillars, hip and jack rafters; purlins where connected to common rafters and running rails and ladders; staging; railings etc,complete using ERWor induction butt welded type conforming to IS 1161-1979 grade st. 240, complete all as specified and directed.
7	Dismantling wrought iron or mild steel work of any description not otherwise provided for.
8	S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
9	S&F framed work as in doors or gates, any object stand of angle, tubular or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165
10	Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site
11	S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipecomplete all as specified and directed.
12	S&F ball brass valve 20mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
13	S&F, in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bor dia, including taking down old & removal, complete all as specied and directed.
14	S&F, in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 15 mm bor dia, including taking down old & removal, complete all as specied and directed.
15	Demolition of reinforced cement concrete of any description in any position as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal taken to any lead of rubbish outside MoD land, complete all as specified.
16	M&L for RCC 1:2:4 in slabs supported on walls, beams, deck slabs and in shelves (as at kitchen, WHB, Sink etc) and the like, incl necessary formwork, complete all as spd.
17	Material and labour for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushedstone aggregate as in cover slabs of manholes, gully traps etcset in cement mortar (1:4) complete all as specified and directed.
18	S&F mild steel deformed or twisted bars 10mm dia cut to length, bent to shape as required and binding with anealed wire not less than 0.9mm dia complete.
19	Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.
20	M&L for Glazed ceramic coloured tiles (450X300X7mm) thick as in verticalsurfaces such as skirting/dado etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and 10mm thick rendering on wall in CM 1:4 complete.
21	S&F for Non skid coloured ceramic joint free tiles 7 to 8 mm thick (Square/rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, skirting etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
22	Demolition of stone slabs and tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar.
23	M&L for Granite (of any type) work 18-20mm thick (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl cutting, waste, full rounded off corner/edges, rubbing andmirror polshing to achieve the desired granite finish etc complete all as spd.
24	M&L for Roughening surface of old concrete by picking,sweeping clean and washing down with water to remove dustand brushing neat cement slurry with 3.0 kg of cement per sqm. Complete all as specified and directed.
25	M&L for Screed bed or beding layer of morter 20mm thick in cement morter 1:6 for laying floor finishes to receiving the kota stone complete all as specified and directed.
26	M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
27	Material and labour, coloured chequered cement concrete tiles 200X200X25mm or 300x300x25mm thick, factory made, ISI marked (IS 13801-1993), with grey cement &pigment, laid with neat cement slurry as in path, pavement ,floors, etc. @ 3Kg/Sqm over & including 20mm thick screed bed of cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed.
28	M&L machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 grade with grey cement & pigment.
29	M & L Sand filling under interlocking coloured paver block average 25mm thick complete all as specified and as directed.
30	M& L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in drain both side kerbs or mud stops, rounded or chamfered on edgescomplete all as specified
31	Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50sqm & not exc 4.00 sqm each and removing from site incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.
32	Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.
33	S&F 125 x 60mm pressed steel frames 1.25mm thick for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts etc.
34	M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in filling chowkhats, plinth courses, copings, kneelers, apex stones, bed plates etc includingnecessaryform work complete all as specified and directed.
35	S&F Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed by Engineer-in-Charge.
36	M&L for 30 to 35 mm thick glazed and Skelton shutter of 1st class softwood (Hollock) open rebated and prepared to receive glass,gauge etc divided into squares(08 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, supplied and fitted to chowkats all as specified.
37	S&F stainless steel hinges, medium weight cold rolled mold steel, size 100mm, ISI marked, complete all as specified and directed .
38	S&F Aluminium alloy, anodised sliding door bolts 300 mm long with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and directed.
39	S&F, aluminium anodised barrel tower bolts of extruded section, 200mm, ISI marked, complete all as specified and directed .
40	S&F, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .
41	S&F, extruded aluminium alloy handles with plates, fabricated type, anodised 150 mm size, ISI marked, complete all as specified and directed .
42	S&F Hasp and staple Size of 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, ISI marked, complete all as specified and directed.
43	S&F in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified.
44	S&F Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge, complete all as specified and directed.
45	S&F double leagedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified
46	S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished, fixed in repair.
47	S&F Factory made box type steel window with side hung shutters (carrying wire mesh) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
48	-Ditto-as item no 46.00,but without glazing bars of shutter (carrying glass).
49	S&F Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
50	S&F framed work for grills, gratings etc with ends of bar shouldered and for riveted or welded framed work guard bars and similar work conforming to Fe.290.Gde-E-165 all as specified.
51	S&F stainless steel steel wire cloth 0.36mm nominal dia of wire and 1.40mmaparture fixed with tinned tackes or stainless steel wire staples and including fixing with beads (iron/wood flats) supplied with joinery when fixed in panels of joinery. , complete all as specified and directed.or .
52	S&F sheet glass 4mm thick ordinary quality and glazing with oil putty andsecuring pins n.exc 0.50 sqm each panes.
53	M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface over 10cm width or girth including preparation.
54	M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer after complete filling, all as specified.
55	M & L for Preparation of old wood surface (wooden scantling, rafter, purlins etc) of any description not otherwise described, over 10cm width or girth and applying Two coat of synthetic enamel paintcomplete all as specified and directed by Engineer-in-charge.
56	M&L for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of white lime wash complete all as specified.
57	M&L for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shadesetc. by applying two coat of cement base paintwith and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified.
58	S&F Stainless steel (SS) 20 mm dia curtain rod, bright finish, including set of fixing brackets(wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs fixed in repair, complete all as specified and directed.
59	Demolition of brick/ stone work built in cement mortar including all quoins, walls, arches, pillars etc all as specified.
60	M&L for walling of random rubble stone masonary, brought up to courses, well bonded, bedded and solidly hearted built in cement morter 1:6 including racking or cutting out joints complete all as specidfied and directed by Engr-in- charge.
61	All as per item No. 59.00 above but " except stone" complete all as specified and as directed.
62	M&L for providing cements 1:3:6 type C1 using 20mm graded aggregate as in plinth course,string courses, lacing courses, parapets and rainling up to 60 cm height, copings, kneelers, apes stones, bed plates, water troughts and the like including weathering,slightly rounded or champfered angles and throating incl use and waste of necessary form work complete all as spd. complete all as specidfied and directed by Engr-in- charge.
63	M&L for raised pointing to random or polygonel rubble, uncoursed or brought up to courses in CM 1:4complete all as specidfied and directed by Engr-in- charge.
64	M&L for providing cast-in-situ of plan cement concrete (Bond Stone) type C-1 (1:3:6) using 20mm graded crushed stone aggregate and set in cement morter 1:6 between stone masonary, complete all as specidfied and directed by Engr-in- charge.
65	PVC (SWR) pipes 110mm dia as in weep holes in retaining wallcomplete all as specidfied and directed by Engr-in- charge.
66	M&L for brick work sub class “B” bricks straight or curveted in plan exc. 6mtr mean radius with old size bricks Iin CM 1:6 all as specified.
67	Same as item No 65.00, above but except bricks all as specified.
68	Taking down cement plaster on brick or concrete surfacesincluding racking outjoints hacking for keys scrubbing down with water etc.
69	M&Lfor rendering 15mm thick in cement mortar 1:4 as on brick/concrete surfaces for two storey bldg, finished the surface even & smooth w/o using extra cement incl. necessary scafolding all as specified.
70	M&L for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shadesetc. and applying two coat of cement base paint, complete all as specified.
71	M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces), complete all as specified and directed by Engr-In- Charge.
72	M&Lfor preparation of new decorated plastered surfaces of walls by applying two coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge.
73	M&L for 3mm thick wall care putty (laid in 2 layers/coats) on wall new surface for making complete smooth surface using sand paper, complete all as specied and directed.
74	Taking up or down steel water tubing and connection from wall, ceiling, and floors etc including removal to store of 15mm bore all as specified.
75	Taking up or down steel water tubing and connection from wall, ceiling, and floors etc including removal to store of 20mm bore all as specified.
76	M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.
77	M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.
78	Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.
79	Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.
80	DismantlingPVC drain or vent pipe of any description in any position including bends branch pieces etc.
81	S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including clamps as required complete all as specified.
82	S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.
83	S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
84	S&F 75mm dia PVC (SWR) junction single, (single T), equal or un equal including jointing with solvant cement as required complete all as specified.
85	S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
86	S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall excluding clamps as required complete all as specified.
87	S&F 110 mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
88	S&F 15mm bore bib taps long body (fency type) brasscast copper alloy (CP)with crutch or butterfly handles, screwed down, screwed for iron pipes or for brass ferrules and fixed in repairs.
89	S&F angle valves, cast copper alloy CP 15mm,screwed down, high pressure,with crutch orbutterflyandle,screwed bothends for iron pipe or for unions and fixed In repair.
90	S&F central hole Basin Mixer, fancy type, WHB/Bathroom, Kitchen , without poupwaste system, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
91	S&F, counter-type wash hand basin, vitreous china, white, fency decorative type, size 550mm x 400mm fixed over RCC slab incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, fixed as in repairs complete all as specified.
92	S&F in repair stainless steel sink, 1.00mm thick for kitchen, with sink waste coupling, 32 mm, Hard PVC flexible waste pipe, washers,including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union etc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm complete.
93	S&F Towel rail 600 mm long, 20 mm dia, ‘D’ type, chromium plated, fixedto walls with screws and plastic cleats, fixed in repairs, complete all as specified.
94	S&F PVC connections 600mm long including back nuts and washers fixed to 15 mm bore of pipe fixed in repairs.
95	S&F 15mm dia PVC connection with PTMT nut,of length 450mm, fixed as in repairs complete all as specified and directed.
96	S&F in repairs600mmX450mm bevelled edge looking mirror of selected quality glass,mounted on6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.
97	S&F, grating doom (openable type) 100mm dia of PTMT with or without waste hole both.(minimum weight 25 gms) as in repair.
98	S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair
99	S&F in repair, soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws,
100	S&F Stainless steel peg set of 6 hooks including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms).
101	Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.
102	Material and labour for 40mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor, chajjas etc, complete all as specified and as directed.
103	M&L PCC 1:2:4 type C2 using 20mm graded agg as in surface channel/drains, incl necessary formwork etc all as spd.
104	Extra for foriming fair finished drain as channel of cement concrete using extra cement including forms moulds mitred/stopped end etc.
105	Demolition and breaking up to 150mm dia drain/sewer pipes below ground level (salt glazed stoneware, AC or reinforced concrete and PVC) set in cement mortar incl PCC at any depth complete all as specified and as directed.
106	S&F Reinforced concrete pipes, class NP2 200mm dia pipe laid and jointed complete with collars per length of pipe and make sewer line functional.
107	Concrete bed to drain pipe with PCC (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates, including packing under and haunching against complete surrounding pipes with concrete for SGSW pipe of bore 200 mm after they are laid and tested, complete all as specified and directed by Engineer - in -Charge.
108	M&L for PCC 1:5:10 type E-2 as in sub base& in foundation concrete all as specified .
109	Dismantling walls or ceiling boards (fibre,plup insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed by Engr-In- Charge.
110	S&F in repair GI metal suspended ceiling system OREO GI lay in plain of 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62% Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire.
111	S&F Solid PVC Wall Lining including of 5 mm thick wood grain printed PVC sheet single side prelaminated inclusive of solvent cement, PVC angle at edges and fixing at site on PVC frame, complete all as specified.
112	S&F 5 to 15 mm thick PVC sheet fillet of width 35 mm thick wall panelling inclusive of fixing of wall to make PVC frame, complete and as specified.
113	M&L in repair, 17-18 mm thick, HDHMR board high density, water, termite, boer and fungus resistance, laminated 0.90 mm thick both sides fixed with screws to timber frame work as in cupboard shelves, shutters, bathroom doors, kitchen cabinets etc, complete all as specified and directed by Engr-in-Charge.
114	Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair includingtaking out the existing complete all as specified and directed by Engineer-in-Charge.
115	Supply & fixingmagnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge.
116	S&F Brass handles, Size of handle in 100 mm, cast type, polished bright complete all as spd.
117	Dismantling timber scantling un framed work40 sq cm and over in section in any position, unframed work complete all as spd.
118	S&F Mild steel work in tubular trusses (Hollow Square/ Rect./ Circular pipe), including "U" curve shaped pipes, special shape washer etc., complete using ERWor induction butt welded type conforming to IS 1161-1979 grade st. 240, complete all as specified and directed.
119	Taking out existing earthings and M&L for replacement of chemical earthing (Pipe in pipe technology) Two B class IS mild steel pipe, one inside the other, hot dip galvanised with 100 micron coating outside and about 300 micron coating inside filled with high conductive and corrosion Resistant Crystalline Mixture inside and Backfill compound around the outer electrode) outer electrode dia 72 to 80mm and inner electrode dia 35 to 40 mm both 10" long, incldg making earth pit of size 4" x 4" and 11" deep fill the entire pit with black cotton soil or normal soil, pour enough water so that pit is full with water, leave it for three days so that soil soaks up the water, the soil level has goes down, again top up the pit with soil & fill the water.
120	Item No 118.00 Contd... :- After two or three days when the pit is sturdy and ready for earthing purpose, install the earthing electrode as per installation method as below:-(a) Mix backfill compound evenly with soil.(b) Remove plastic sleeve carefully from electrode.(c) Place naked electrode at centre of pit.(d) Start refilling empty space around electrode with backfill compound in layers. (e) Pour some water and poke the pit with a long wooden rod to allow trapped air to escape.(f) Gradually continue refilling process till electrode is buried in the pit up to the green patch painted on the top portion of electrode.(g)Ensure that pit is not watery (h) Pack electrode with compound nicely and tightly, so that it stands firmly in pit.(j)Pour a few buckets of water around pit.(k)Pour a few buckets of water around in the pit everday for 10-15 days for system to set.(l)Connect the earth electrode with equipments by 25mm x 3mm aluminium strip.(m)Earthing test point terminal block made of gun metal size 150x100x50 mm drilled and screwed including 4 Nos 8 mm dia 40 mm long hexagonal head bolts and washers duly fixed on walls with fasteners 4 Nos. Note : (a) Earth resistance shall not be more than 5 Ohm.(b) Aluminium strip for connections shall be measured and paid separately.
121	M&L for copper strip 20x3.15 mm with saddles and fixing screws etc. For roof conductors and down conductors above groundcomplete as directed.
122	M&L for Air Termination , single pointed, copper rod 12 mm dia and 300 mm long complete.
123	M&L for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos 8 mm dia 25 mm long hex head screw complete as diected.
124	M&L for PCC Type B2 1:2:4 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars boundary pillars and posts (including caps and basis)
125	Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc.
126	M&L point wiring using approved colour codingas per IS with stranded copper conductor single core FRLSH 1.5 Sqmm (Nominal area), PVC insulatedcable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories incl mild steel sunken boxes suitable formounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated copper conductor FRLSH 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : Switch/sockets shall be measured and paid for separately :-
127	One light/fan pointcontrolled by one switch
128	One switch socket outlet 3 pin,5 Amp on the independent board
129	One switch socket outlet 3 pin,5 Amp on same board
130	All as per item No 124.00 here-in-before butwith 2 single core PVC insulated FRLSH and sheathed copper conductor of size 2.5 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories with 2.5 Sqmm PVC insulated FRLSH copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 2.5 sqmm copper cableincl PVC insulated copeer conductor 1.5 Sqmm as continuedearth wire .
131	All as per item No 124.00 here-in-before butwith 2 single core PVC insulated FRLSH and sheathed copper conductor of size 4.0 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories with 4.0 Sqmm PVC insulated FRLSH copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.
132	S&F Lamp holder,PVCinsulated body, with back plate suitablefor batten fitting complete all as specified.
133	M& L switch piano,flush type, single pole 1 way 6 Amp,ISI marked complete all as specified.
134	S&F switch pianoflush type, single pole 1 way 16 Amp complete all as specified.
135	M& L socket 5 pin 6 Amp piano flush type,ISI marke complete all as specified.
136	S&F socket out let 2 in one 6 pin 6 & 16 Amp complete all as specified.
137	S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate bady complete all as specified.
138	S&F LED lamp 9watt capacity B22 polycorbonate,isolate body complete all as specified
139	Supply and fixingAluminium housing LED 20 Watt inverter batten with inbuilt Li Ion battery for power backup of 2 to 3 hrscompleteall as specified and directed.
140	Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
141	S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr-in-Charge.
142	S & FLED Building security light 30 wattLED Inverter RTCinbuilt for AUTOON/AUTO OFFand must have dimming facility from 10 to 100% of rated wattage as peruser defined timelinemade pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light withBracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wallComplete all as in repair.
143	S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 240 VoltSPNincl taking down old one complete all as specified.
144	S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 VoltSPNincl taking down old one complete all as specified.
145	S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 415 VoltTPNincl taking down old one complete all as specified and directed by Engineer - in - Charge. .
146	Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps10kA and making connections complete all as specified & directed. complete all as specified & directed by Engr - in - Charge.
147	Supply & fix Isolator 4 Pole "C" series 63 amps capacity AC 415 V,10kA complete all as specified and directed by Engineer - in - Charge.
148	Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. complete all as specified & directed by Engr - in - Charge.
149	M&L for submain wiring with 2 single corePVC insulated FRLSH cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC concealedconduit heavy duty of suitable size incl taking down old one cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLSHcopper conductor cable for earth wire fixed with shaddle and connectingto common earth teriminals complete all as specified.
150	S & F Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps.
151	Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate, NRV, connection piece etc.andincluding taking down unserviceable and deposit to E/M Store. Note:- Geyser will be fitted with fastners-04 Nos including bolts washers etc and making good disturbed surface complete all as specified and directed by Engr-in-Charge.
152	Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep, 900 rpm, with, blades, frame and louversshutters, mounting on walls with holding down bolts, nuts, washers with cutting holes into or through stone/brick walls for fixing of exhaust fanincluding making good the cutting and matching the surface with existing surfaces and connection of flexible copper conductor cable three coreceiling rose to fan and testing includingtaking down unserviceable and depositing to E/M Store complete all as specified and directed by Engr-in-Charge.
153	M&L Earthing complete withand including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixtureof charcoal and salt in alternate layers ,buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron wire 4 mmas earthing lead by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 20 mm bore (light grade)and connected to main switch or main control board all as shown in electrical plate No. 3of SSR - 2009(Pt I) & including necessary excavation and earth work in Hard anddense surface. The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Normalmix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE :- The unit rate include earthing lead and protection pipe upto 6.5 metre from top of earth plate.
154	Supply and fixing in repair/replacement to existing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/ Surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.
155	Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core,complete, all as specified and directed.
156	Excavating in trenches, n.exc 1.5 m wide and n. exc 1.5 m in depth forlaying cable , pipe and getting out
157	Returning , filling in, including spearding, levelling , wateing and well ramming in layers not exc 25 cm
158	Removing excavated material n exc 50 M and depositing whee directed at a level n exc 1.5 m above the starting point
159	Supply and Laying reiforced precast cable cover class LV Type I flat size 250mmmx 150mm x40 mm for the protection of cable laid flat dry across the cable complete all as specified.
160	Supply and lay Dry sand cushioning to under ground electric cable on layer of8cm thick before laying the cable and second layer of 15cm thick after laying the cable, complete, all as specified in clause 19.75 of M.E.S Schedule Part-I (2009)and directed.
161	S&F Post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified.
162	Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 10 Sqmm 2 core,complete, all as specified and directed.
163	Supply and laying HDPE pipe 40 mm dia with all fittings laid in trenches or fixed on walls etc complete all as specified and directed.
164	Supply and laying GI Tube, light grade, galvanised 40 mm dia with all fittings laid in trenches or fixed on walls etc complete all as specified and directed.
165	Amount of credit of Rs. 221750.20 for retrived old material as mentioned in Schedule "A" section-II of tender document in pdf form, will be deducted offline while acceptence of tender.