|
| 1 | (CIVIL WORKS) |
| 2 | Dismantiling brick or stone masonry in lime or cement mortar above 3m height including stacking the useful materials for re-use and removing the debris within 50m lead including cost of all labour T & P etc. complete as per the specification and direction of the Engineer in-charge. |
| 3 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the useful materials for reuse and removing the debris within 50m lead including cost of all labour T&P etc. complete as per the specification and direction of the Engineer-in-charge. |
| 4 | Dismantling wrought and framed timber in roof frame work of floors after careful removal of nail, bolts etc. and stacking of the useful materials for reuse and removing the debris within 50m lead including cost of all labour T&P etc. complete as per the specification and direction of the Engineer-in-charge. |
| 5 | Dismantiling brick or stone masonry in lime or cement mortar below 3m height including stacking the useful materials for re-use and removing the debris within 50m lead including cost of all labour T & P etc. complete as per the specification and direction of the Engineer in-charge. |
| 6 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including dressing & levelling the bed, shoring shuttering &propping bullahs, dewatering (if required) with cost of all labour, labour cess,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer-in-charge. |
| 7 | Filling foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance,loading, unloading, royalty and taxes of all materials, cost of all labour, labour cess, sundries, T & P required for the work etc. complete in all respect as per direction of the Engineer in-charge.(Measurement will be taken on finished compacted section only) |
| 8 | Providing and laying plain cement concrete of proportion (1:3:6) in foudation and floors using 4cm. Size black hard crusher broken granite stone metal free from weathered skin having cubical shape and screened washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick in each layer including cost, conveyance, royalty & taxes of all mateerials and cost of all labours, labour cess, T & P etc. complete as per the direction of the Engineer-in-charge. |
| 9 | Providing , lifting, hoisting and laying Reinforced cement concrete of M20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 K.g/ Square cm.in 15cm. Cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 20mm. & down graded size black hard crusher broken granite stone chips free from weathered skin having cubical shape ( 20 mm size chips not less than 60 % and 10 mm size chips not less than 40 % ) and screened washed sharp sand for mortar of approved quality from approved quarry,to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering, dismantling them and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost conveyance, loading, unloading, royalty and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-charge. But excluding cost and conveyance of M.S. roads or Tor steel and binding wires and labour charges for stranightening, cutting, bending etc. of M.S. rod for steel tying the grills and placing in proper position. |
| 10 | Column base |
| 11 | Column up to PI lvl:- |
| 12 | Tie/Plinth Beam:- |
| 13 | Lintel band |
| 14 | chajja |
| 15 | Roof Slab |
| 16 | Stair case |
| 17 | Fly ash brick masonry in cement mortar (1:6) in foundtion & plinth using fly ash bricks of 25 X 12 X 8 cm size having a crushingstrength of not less than 75 kg./sqcm with dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost conveyance, royalty and taxes of all materials with all labours, labour cess and T & P required for the work complete in all rspect as per direction of Engineer-in-charge. |
| 18 | Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors using portland slag cement (PSC) with 12mm Size black hard crusher broken granite chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading, royalty and taxes of all materials and cost of all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge. |
| 19 | Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 X 12 X8 cm size having a crushing strength of not less than 75kg./sqcm with dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost conveyance, royalty and taxes of all materials with all labours, labour cess and T & P required for the work complete in all rspect as per direction of Engineer-in-charge. |
| 20 | Supplying cutting, straighteningcoiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL/Tiscon/RINL/ JINDAL STEEL/SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances & taxesof M.S Rod or tor steel and binding wire of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 21 | Fixing of Chequered tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 of size 30cm X 30cm special plain/ printed series in floors over 25mm thick bed of cement mortar 1: 1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T & P complete in all respects as per direction of Engineer-in-charge. |
| 22 | Supplying fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622 : 2006 of size 600mm X 600 mm Color/ Printed series (Ivory) of approved make (OASIS/SOMANY/KAJARIA or equivalent) in floors on 25mm thick bed of C.M (1:1) (1 cement :1 course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including rubbing & Polishing the top with cost of all materials, labour, labour cess, T & P & taxes etc. required for the work complete in all respect as directed by the Engineer in charge. |
| 23 | Supplying fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622 : 2006of size 600mm X 600 mm Color/ Printed series (Ivory) of approved make (OASIS/SOMANY/KAJARIA or equivalent)as directed by the Engineer in charge in dados skirting and riser of steps on 12mm thick cement plaster (1:3) jointed with neatcement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete withcost conveyance, royalty of all material, labour, labour cess, with all other taxes etc. complete in all respectsas directed by the Engineer in charge. |
| 24 | Supplying and fixing in riser, dados with ceramic wall tiles of special plain/printed series of premium grade having thickness 6.5 mm to 6.7mm confirming to IS 13753 and of size 200mm x 300mm / 200mm x 200mm of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ), laid over 12mm thick bed of cement mortar (1:3) (1cement:3course sand)and filling the joint with white cement mixed with pigment to match the shades of the tile including cost, conveyance, royalty, taxes of all materials, all labour, hire and running charges of all machineries,labour cess, T&P sundries complete as per specifiction and direction of Engineer-in-Charges. |
| 25 | Supplying, fitting & fixing in all floors of M.S grils, grill gates, M.S. gates, garage door, collapsible gates with top bottom rails, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat of primary steel producers such as SAIL/Tisconincluding painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T & P sundries etc. complete in all respect with all other taxes as per specification & direction of the Engineer-in-charge. |
| 26 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete. With cost of all materials & labour, labour cess, T & P sundries etc. complete in all respect with all other taxes as per specification & direction of the Engineer-in-charge. |
| 27 | Supplying, fitting & fixing in all floors of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. With cost of all materials & labour, labour cess, T & P sundries etc. complete in all respect with all other taxes as per specification & direction of the Engineer-in-charge. |
| 28 | Supplying, fitting & fixing in all floors of openable UPVC door with door frame of approved make with6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. With cost of all materials & labour, labour cess, T & P sundries etc. complete in all respect with all other taxes as per specification & direction of the Engineer-in-charge. |
| 29 | Providing 16mm thick cement plaster with cement mortar of mix (1:6) with screened and wahed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalty of all materials with costof all labour, labour cess T & P, and scaffolding required for the work with all other taxes etc. complete in all respect as directed by the Engineer in charge. |
| 30 | Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and wahed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalty of all materials with costof all labour, labour cess T & P, and scaffolding required for the work with all other taxes etc. complete in all respect as directed by the Engineer in charge. |
| 31 | Providing 6mm thick cement plaster with cement mortar of mix (1:4) with screened and wahed sharp sand for mortar and finished smooth to R.C.C work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalty of all materials with costof all labour, T & P, and scaffolding required for the work with all other taxes etc. complete in all respect as directed by the Engineer in charge. |
| 32 | Supply, fitting and fixing of stainless, steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmX 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance f all materials cost of all labour, labour cess with T & P with all other taxes required for the work complete in all respectas per direction of theEngineer-in charge. |
| 33 | Finishingplastered surfaces of walls with synthetic putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour, labour cess, all T & P with all other taxes etc, required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 34 | Painting two coats of Plastic emuisuion paint \"Royale shyne to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering applying putty wherever necessary & cost of scaffolding staging charge with cost conveyance cost of all labour, labour cess with T & P with all other taxes etc. complete as per direction of Engineer-in charge. |
| 35 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of red oxide primer including cost conveyance, royalties of all materials and cost of all labour with T & P required for the work with all other taxes etc. complete as per specification & direction of Engineer-in charge. |
