|
| 1 | S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primerincluding making good disturbed surfaces of walls, complete and including taking down old U/S window .Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Glass pane/wire gauze shall be measured and paid separately. |
| 2 | S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primerincluding making good disturbed surfaces of walls, complete and including taking down old U/S window Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Glass pane/wire gauze shall be measured and paid separately. |
| 3 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed. |
| 4 | S&F in repairgalvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified. |
| 5 | M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of pink primer complete all as specified and directed |
| 6 | Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified. |
| 7 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer complete all as specified and directed |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (Double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2,modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 9 | S&F decorative 18mm thick factory made 100% soild rigid PVC (Poly Vinyl Chloride) foam sheet prelam colour having density of 600 Kg/Cum, manufactuered by an ISO 9001-2015 Certified Company, Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process, for one side laminated solid PVC foam sheet PVC film laminate should be pasted on PVC sheet, with suitable SS hinge, 100mm long decorative SS handle, magnet for receiving door shutter, adhesive and of approved shade, manufacturer embossing, bar code and hologram on door, test certificate and autghorized letter complete all as specified and directed.Note: (i) Work will be complitated as per sample made in Complaint cell Bana Singh Vihar |
| 10 | Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles,fixed to chowkat, including taking down old U/S frame with shutter complete all as specified & directed. |
| 11 | S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete as specified & as directed. |
| 12 | Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat,including taking down old U/S frame with shutter . complete all as specified & directed. |
| 13 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) including shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including powder coated \"D\" type handle of suitable size, tower bolt of suitable size, suitable size hinges heavy grade complete all as specified & as directed.Note :- Mortice lock, Door closer & Glass panes/wire cloth shall be measured & paid seperately under relevant item of BoQ. |
| 14 | S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed |
| 15 | M&L for brick work using old size fly ash bricks as specified in clasue 6 of Particular specification, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 including demolition of old brick workcomplete all as specified. |
| 16 | M & L for rendering 10mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified |
| 17 | M & L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified |
| 18 | M&L for rough cast finish plaster by applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete . |
| 19 | M&L for preparation of newly plastered surfaces of wall & applying two coats of plastic emulsion paint of approved shade/tint over 2mm thick wall care putty on walls all as specified & as directed. |
| 20 | M&L for preparing new plastered or unplastered surface of wallswith 2mm thick wall care putty over plastered surfaces and applying two coats of exterior emulsion paint Apex (Weather proof) of approved shade/tint over a coat of primer of same make on walls all as specified & as directed. |
| 21 | M&L for preparation of new plastered surfaces of walls and applyingtwo coats ofcement base paint of approved shade/tint over a coat of alkali resistant primer ofsame make all as specified & as directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts including dismantling of old AC sheet complete all as specified & directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed. |
| 24 | S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 25 | S&F GI powder coated snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32 x 24 x 1mm thick, cross Tee 26 x 24 x 1mm and wall angle 24 x 24 x 1mm thick, flange covered with PVC thin includng hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including Gypsum board 7-9mm thick duly finished surface (thin PVC layer on gypsum board as per maunfacturer\"s instructions) of size 600mmx600mm thick and the same shall be placed in snap grid as in false ceilingincluding Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified & directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 27 | M&L for vitrified ceramic tiles8 to 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tilesnot exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 28 | M&L for vitrified ceramic tiles8 to 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tilesexc 0.42 sqm but not exceeding 1.0 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 29 | M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 30 | M&L for glazed ceramic tiles (coloured) 1st quality,450mm x 350mm x 7mm thick, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed. |
| 31 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed. |
| 32 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as directed. |
| 33 | M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as sub base in flooring,complete all as specified & as directed. |
| 34 | M&L for 75mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified. |
| 35 | M&L for machine cut Kota stone slab flooring 18 to 20mm thick laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.Note : - Kota stone shall be of size 550mm x 550mm (minimum) when brought at site. |
| 36 | M&L for machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed. |
| 37 | M&L factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed. |
| 38 | M&L forcoloured tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 20mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed. |
| 39 | Material and labour 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as inplinth protection, surface finished fair and even without using extra cementcomplete all as specified. |
| 40 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 41 | M&L formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete. |
| 42 | M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span and the like.Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 43 | S&F in repairs15 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwingas required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed |
| 44 | S&Fin repairs 20 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwingas required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed |
| 45 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. |
| 46 | S&F PVC floor trap of 75 mm bore, with grating including jointing towaste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & as directed. |
| 47 | S&F in repairs salt glazed stone ware gully trap square or round mouthed type \"P\" of size 150 x 150 mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C-0block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed. |
| 48 | S&F in repairsvitreous china wash hand basin, white, flat back of size 630mm x 450mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.Make : Cat Part No:- S2040126 of cera, Jonhson, Hindware |
| 49 | &F in repair kitchen sink with drainage board (overall size 1145mm x 510mm and bowl size 560mm x 410mm x 200mm or nearest higher size) ) made from high grade AISI-304 (18/8) stainless steel of 1mm thickness including 32mm bore brass CP waste coupling, plug, washer, 32mm bore and 600mm long PVC waste pipe including fixing cantilever brackets made of MS angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning of ends of brackets to errecting stand into wall and making good distrubed portion in CM (1:2) on in PCC (1:2:4) using 20mm graded stone aggregate and connecting union to pipecomplete all as specified and directed. |
| 50 | Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. |
| 51 | S&F in repairs, PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified. |
| 52 | Supply and fix 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated,screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes & fly nuts, screwed for iron pipes all as specified and directed. |
| 53 | S&F in repairs 15mm bore stop valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. |
| 54 | S&F in repairs 15mm bore angle cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 55 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenchescomplete all as specified including taking out old unserviceable pipe of any type with fittings and making good around complete all as specified and directed. |
| 56 | Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenchescomplete all as specified including taking out old unserviceable pipe of any type with fittings and making good around complete all as specified and directed. |
| 57 | S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 40mm (Minimum weight 60gms). |
| 58 | S&F in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) all as directed. |
| 59 | S&F 32/38/40 mm dia PVC flexible waste pipewith socket for union, for WHB/urinal/sink complete all as specified. |
| 60 | S&F in repairs 15 mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 61 | Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depthfor laying cables, foundation for pole etcand getting out in soft/loose soilcomplete all as specified and as directed. |
| 62 | Returning filling in incl spreading leveling watering and well ramming in layers n. exc 25cm thick etc complete all as specified and as directed. |
| 63 | Removing excavated material to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point etc complete all as specified and as directed. |
| 64 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduitwith switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etcincluding sunk type pressed steel box covered with and including modular covered plate and frame ’, complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ\" ).\" |
| 66 | All as per item No. 65.00 (here-in-before)but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board |
| 67 | All as per item No. 65.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board. |
| 68 | AllaspersrlitemNo.65.00(here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent boardincluding provn of2.50 Sqmm unsheathed, multistrandedcopper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F modular type switch , single pole, one way, 5/6 Amp, 230 Volts all as specified & directed. |
| 70 | S&F modular type switch, single pole, one way, 15 Amp, 230 Volts |
| 71 | S&Fmodular type socket outletmultipurpose 3 Pin 5/6 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed. |
| 72 | S&F modular type socket outletmultipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed. |
| 73 | S&F modular ceiling rose surface bakelite 65mm x 50mm,3 terminalswith back plate etc complete all as specified and directed. |
| 74 | S&Fin replacementmodular Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed. |
| 75 | S&F LED light fitting 1x22W, regal batten for LED including ultra bright glass LED Tubelight with very high efficacy, single / double side connection all as specified and directed. |
| 76 | S&F in replacement street light LED light fitting 20 Watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.Make : Cat Part No ENDURAPEARLSL20WLED757SASYTOPCMPof Havells or Cat No LTESSI20WLED of C&Sor equivalent of make as mentioned in Appx \"C\" list of makes here-in-after |
| 77 | S&F MCB SP, 6 to 32 Amps240 Volts , \"C\" curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB. |
| 78 | S&F MCB SPN, 32 Amps240 Volts , type \"C\" curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB. |
| 79 | S&F sheet metal enclosure distribution boardSP&N,8 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed. |
| 80 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers,PCCchamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.Note :- PCC chamber shall be constructed at least 1.5m away from the earthelectrode and pipe for watering shall be provided in slanting manners. |
| 81 | Supplyand fixing ceiling fans copper windingcomplete with blades, down rods, and accessories 230 V , 1200mm sweep.Min air delivery 210 CFM with service value 6.00 BEE and Five Star rated with brushless with direct current moter (BLDC) with remove control unit complete. |
| 82 | Supply , laying,jointing, testing and commissioningof size 16 sqmm 2core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed.Note : Excavation, earth work, sand cushion & brick protection shall be paid separately. |
| 83 | S&F MS heavy duty down rod of 15mm dia and 1000mm length with necessary cutting / drillingholes and painting for ceiling fans complete all as specified and directed. |
| 84 | S&FSub main wiring with two single core cable PVCinsulated unsheathed of copper multi stranded conductor FRLS cable of size4 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm diamedium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length. |
| 85 | Supply & fixing and testing metal body exhaust fan of 380mm sweep heavy duty, double ball bearing, 900 RPM, suitable for SP 230 / 250 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall & cutting opening complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete all as specified.Make : Model No Turbojet SP of Havellsor Cat Part No Supreme DLX HD of Bajaj or Cat No Transair of Crompton equivalent of make as mentioned in Appx \"C\" list of makes here-in-after. |
| 86 | S&F LED recess mounting panels 2 feet x 2 feet luminaire of capacity 36 watt suitable to be fixed in ceiling having extruded aluminium frame and super bright LEDs of complete all as specified and directed.Make : Surya Cat Part No SLE FP 36 R22 or Cat Part No VENUSNEOHE2X2R36WLED840PIRSENSOR of Havells or Cat Part No LTCRP36WLED2X2of C&S or equivalent of makes as mentioned in Appx \"C\" list of makes. |
| 87 | M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed. |
| 88 | M&L for Sand cushioning 230mm thickness withdry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) andpunned down to 180mm after laying of cablein trenches for protection of cable completeall as directed.Note :- For the purpose of payment only punned thickness shall be measured. |
