Tidel Park Limited has published Tender For E-Tender For Establishment Of Plug And Play Manufacturing Unit With All Infrastructure Facilities In Plot No. L6, Vallam Vadagal, Aerospace Park, Sriperumbudur, Kancheepuram District.. Submission Date for this Tender is 16-11-2023. Sport Accessories Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing light Jungle onroad side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness etc., all complete in all respects complying with relevant standard specification as directed bythe departmental officers. |
| 2 | Filling and levelling , intercarting the conveyed earth within a lead of 23 KM , including necessary excavation and cost of earth, loading in trucks properly with a safer manner and transporting to the required site and unloadingatrequired location , spreading in layers of 200 mm thick, breaking of clots , removal of foreign materials, / lumps / unwantedvegetationetc., watering,consolidation to the required compaction, including necessary field tests to be carried out as applicable as per IS standards etc., all complete as per the direction of departmental Engineer in charge. |
| 3 | Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. |
| 4 | Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 325mm x 165mm in Cement Concrete 1:3:6 (One cement, three sand and six jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of kerb stone, finishing, curing, fixing and pointing the joints with CM 1:3 (One Cement and Three Sand) to full depth of kerb stone etc., all complete complying with standard specification and as directed bythe departmental officers. |
| 5 | Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and bailing out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., all complete in all respects complying with relevant standard specification (including refilling) |
| 6 | (a)0 - 2 Meter Depth |
| 7 | (b) 2 - 3 Meter Depth |
| 8 | (c) 3 - 4 Meter Depth |
| 9 | (d) 4 - 5 Meter Depth |
| 10 | Supplying and filling in foundation, basement, etc with Msand and gravel mix 1:1 in layers of not more than 15 cm thick well watered, rammed and consolidated to the required compaction etc., all complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and filling in foundation and basement withMsand in layers of 150 mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost ofMsand and as directed by the Engineer in charge. |
| 12 | Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading-V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev -5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the departmental officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transpiration including cost and conveyance of all materials, labour charges, hire charges and fuel charges for loader, water tanker with sprinkler, motor grader, vibratory road rollers and all other equipment"s, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 |
| 13 | Supplying and laying Interlocking Rubber Moulded Hydraulic Pressed Paver Block 83mm thick terracotta colour orgrey colour paver block with M40 grade cement concrete using 6mm chips including levelling the base preparation of sub base, laying out the paver, cut the places to fit the edge, vibrating the pavers and sweeping the sand (grouting) and transportation charges loading and unloading charges, laying charges etc., all complete complying with standard specification and as directed by the departmental officers. |
| 14 | Supplying and laying Interlocking Rubber Moulded Hydraulic Pressed Paver Block 63mmthick terracotta colour orgrey colour paver block with M30 grade cement concrete using 6mm chips including levelling the base preparation of sub base, laying out the paver, cut the places to fit the edge, vibrating the pavers and sweeping the sand (grouting) and transportation charges loading and unloading charges, laying charges etc., all complete complying with standard specification and as directed by the departmental officers. |
| 15 | Providing, laying, spreading and compacting graded stone aggregates for Wet MixMacadam 250mm thick, including premixing the materials with water at OMC in mechanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 16 | Providing and laying Plain Cement Concrete 1:4:8 (One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by the departmental officers. (in all heights and all depths) |
| 17 | Providing and Laying Plain Cement Concrete 1:2:4 (one cement, two M.sand and four hard broken stone jelly) using 20mm jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by the departmental officers. (in all heights and all depths) |
| 18 | Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 Kg/cum and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m") 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by the departmental officers. (Testing for the materials have to be conducted at Government Academic Institutions and the cost is to be borne by the contractor.And no separate payment will be made by the Department for the excess usage of materials). |
| 19 | a) 1.50m depth and upto 4.5m depth below ground level |
| 20 | b) 1.5m depth below ground level and up to FFL (-1.5 to +1.2 level) |
| 21 | c) in Ground floor |
| 22 | d) in first floor |
| 23 | Providing and laying of flooring concrete using, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 Kg/cum and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m") 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, and including cost oflevelling, finishing with required texture (VDF Flooring Finishing and Groove cutting, Ms Channel Fixing 12" 6" c/c Concrete Laying , Levelling and Screed Vibrating using for Consolidating and levelling concrete, Excess Water removing By VDF Method and finishing by power trowel Machine [ 3 level], Providing floor hardener Spreading [ Mixing] on concrete [ 4 kg sqmt fosroc make, Groove cutting 4mm width, depth of 10mm filling and finishing with [Chemical ]polysulphide sealant [ sika / Fosroc make ] ), including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc., complete all as per direction of Engineer-in-charge. |
| 24 | Foundation and basement |
| 25 | Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 Kg/cum and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m") 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed bythe departmental officers. (No separate payment will be made by the Department for the excess usage of materials). |
| 26 | a) 1.50m depth and upto 4.5m depth below ground level |
| 27 | b) In foundation and basement upto 1.50 Mt from Ground Level.(-1.5 to +1.2 level) |
| 28 | c) in Ground floor |
| 29 | d) First floor |
| 30 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casuarina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 31 | a) For R.C.C. works infoundation and basement such as grid beam, plinthbeam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete |
| 32 | b) For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. |
| 33 | c) For RCC surface of Square column and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. |
| 34 | d) For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. |
| 35 | e) Centering for curved surfaces of all RCC items of work |
| 36 | Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make inclusive of conveyance charges, cutting the pad to the required size, cost of materials and labour charges for fixing in position wherever necessary for all floors etc., complete and as directed by the departmental officers. |
| 37 | Fly ash Brick work inCement Mortar 1:5 (One part Cement and five part M sand) using best quality of Fly Ash Bricks230 x 110 x 75mm in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete with standard specification and as directed by the departmental officers. |
| 38 | a) For foundation and basement |
| 39 | Fly ash Brick work inCement Mortar 1:6 (One part Cement and six part M sand) using best quality of Fly Ash Bricks230 x 110 x 75mm for super structure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings. |
| 40 | a) In Ground floor |
| 41 | b) In first floor |
| 42 | Fly ash brick partition wall in Cement Mortar 1:4 (One of cement and four of sand) 114mm thick for super structure in the followingfloors using Fly Ash Bricks230 x 110 x 75mm" in Cement Mortar 1:3 (One Cement and Three M.sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. |
| 43 | in ground floor |
| 44 | Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 45 | Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceilingin all floors, including scaffolding, curing, finishing, etc., all complete complying with standard specification and as directed by the departmental officers. |
| 46 | Plastering in cm 1:5 (One of cement and five of sand) 50mm wide12mm thick for border finish in all floors for elevation purposes, including scaffolding, curing , finishing etc., all complete complying with standard specification and as directed by the departmental officers. |
| 47 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, all complete complying with standard specification and as directed by the departmental officers. |
| 48 | Painting the new walls (Interior & Exterior) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by the departmental officers.(paints and its shade shall be got approved from thedepartmental official before using) |
| 49 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames etc., complete complying with standard specification and as directed by the departmental officers. |
| 50 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open/sliding/fixed as per drawing) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames etc., complete complying with standard specification and as directed by the departmental officers. |
| 51 | Supplying and Erecting Manually Operated Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., all complete complying with standard specification and as directed by the departmental officers. |
| 52 | Manually Operated |
| 53 | Electrically Operated Type (exceeding 12 sqm. Area) |
| 54 | Supplying, Fabricating and placing in position steel reinforcement usingR.T.S. rods of all sizes of reinforcement for all Reinforced cement concrete works including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "the departmental" officers. (The steel rods must be Fe 500 grade of approvedbrand with ISI marking and necessary test certificate to be produced before using it at site) |
| 55 | Providing and laying 40mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two M.sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 56 | Supplying and laying of flooring with anti-skid ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq. m. etc., complete complying with standard specification. (basic rate of the tile considered 50/Sqft) |
| 57 | Supplying and laying of colour designed glazed tiles with 300 x 200 x 6mm design joint free glazed tiles of EURO/ Kajaria or equivalent make as mentioned in the approved list of tiles set in Cement Mortar 1:2 (One Cement and Two M.sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq. m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.(basic rate of the tile considered 50/Sqft) |
| 58 | Supplying and laying the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by departmental officers before use on works) (basic rate of the tile considered 90/Sqft) |
| 59 | Supplying and fixing mild steel grills for windows, ventilators verandah enclosure, ladder and gate as per the design approvedincluding one coat of primer and labour for fixing in position etc. all complete complying with relevant standard specification and as directed by the departmental officials. (The design of grill should be got approved from thedepartmental officials before use) |
| 60 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors including cost of priming coat etc, all complete complying with standard specifications and as directed by "the departmental" officers.. (The make, quality and colour of paint should be got approved by thedepartmental officials before use on works.) |
| 61 | Painting new iron works such as steel doors, windows, ventilators, window bars, Kerb stone, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by the departmental officers.. (The make, quality and colour of paint should be got approved by thedepartmental officials before use on works.) |
| 62 | Finishing the top of Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles of size 300mmx300mmx8mm thick of approved quality laid in cement mortar 1:3 (one part of cement and three parts of sand) 20mm thick with base concrete 1:2:4including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement at the rate of 0.3 Kg. / sq. m. etc., complete complying with standard specification.(basic rate of the tile considered 50/Sqft) |
| 63 | Providing and fixing of 30mm thick Solid PVC Sliding Door shutter conforming to relevant IS standard of best approved quality & superior variety for Physically challenged and differently abled person, made on a structure of MS tubes of 19 gauge thick and size 19x19mm for styles and 15x15mm for top and bottom rails. MS frame to be covered with 5mm thick heat moulded PVC "C" Channel of size 50x30mm for styles with 5mm thick PVC sheet, (75mm wide PVC sheet for top rail, lock rail and bottom rails on either side) panelling of 5mm thick PVC one side sandwich printed lamination, back side same base colours of sheet to be fitted in the M.S.frame sealed to the styles and rails with 30x5mm thick PVC sheet beading on either side and joined together with cement solvent adhesive. Inserting panel colours are as approved by the departmental officers. Sliding aluminium "G" channel to be fixed on the top of the wall, and necessary wheel arrangements to be fixed on the door top side etc, all complete complying with standard specifications and as directed by the departmental officers |
| 64 | Supplying and fixing of Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mmetc., including cost of fixing accessories, tower bolt, aldrop, handle etc, all complete complying with standard specifications and as directed by the departmental officers |
| 65 | Solid panel PVC door with frame |
| 66 | Supply and fixing in position Hot rolled structural steel Primary E350 and secondary Members E250 / Sections at all levels and to any shape & profile consisting of MS joists, channels, angles, GI purloins, GI runners, insert plates, flats and sag rods with necessary sleeves, bolts and nuts, gratings, pipes, edge protection for walls and columns,M.S. base plate, chequered plate of required thickness for duct closing and shafts closing at all floors at all levels with necessary supports such as M.S. angles / M.S. flats, stiffeners to be placed on angle iron frame work including cutting, straightening, welding as per standards for connections including consumables etc. complete.Rate including all materials, labour charges, scaffolding, staging,transportation, lead & Lifts, wastage,etc,. No separate payment made for bolts, nuts, washers, welding etc., Rate shall including preparation of surface, All MS members shall be painted with anti corrosive paint, with two coats of 1st class synthetic enamel paint ofcomplete, as directed by the Engineer-in-charge. |
| 67 | Supply & Fixing of GI Deck sheeting out of 0.80 mm GI Coils with necessary fixing screws rate including all materials, labour charges, scaffolding, staging,transportation, lead & Lifts, wastage, and over lapping etc,. Bottom of the sheet shall be painted with anti corrosive paint, with two coats of 1st class synthetic enamel paint ofcomplete, as directed by the Engineer-in-charge. |
| 68 | Supply & Fixing of MS Handrailing of 1m height with Vertical support at every 0.9m height and top horizontal 40mm dia 2.9mm thick pipe,intermediate horizontal 32mm dia pipe 2.6mm thick with necessary base plate, welding,including preparation of surface, all MS members shall be painted with one coat of anti corrosive paint, with two coats of 1st class synthetic enamel paint etc., all complete, as directed by the Engineer-in-charge. |
| 69 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 1000mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.50mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. the design got approval from the Engineer in charge. |
| 70 | Supply & Fixing of Ridge Ventilators of 600 mm Girth out of 0.50 mm TCT Coated Galvalume sheets with necessary GI Frame work & wire mesh as per standard specification and as directed by the Engineer-in-charge. (makeSAIL / JSW / Tata Bhushan) |
| 71 | Supply & Fixing of 30 mm thick Insulated Panels with 0.47 mm TCT Coated galvalume profiled sheet on top & 0.42 mm TCT Coated galvalume sheetin Bottom layer with PUF Insulation of 40 Kg/CM density, including cost of necessary fixing accessories, over laping of sheets, labour charges, scaffolding etc., all complete, as directed by the departmental officers. (makeSAIL / JSW / Tata Bhushan) |
| 72 | Supplying, Fabrication & Fixing of Eaves Gutter made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, over laping 100mm, labour charges, scaffolding etc., all complete, as directed by the departmental officers. (makeSAIL / JSW / Tata Bhushan) |
| 73 | Supply and fixing of Roof/ Cladding sheets out of 0.50 mm TCT coated galvalume sheets, rate including all materials, labour charges, over laping, scaffolding, staging,transportation, lead & Lifts, wastage,etc,. No separate payment made for bolts, nuts, self driving screws, washers, welding etc.., all complete, as directed by the departmental officers. (makeSAIL / JSW / Tata Bhushan) |
| 74 | Supplying and fixing of 6 mm thick Poly carbonate day light sheet including fabrication of truss work as per standard specification including, fixing of bolts / nuts andincluding cost of all materials, labour charges for fixingetc., all complete including scaffolding wherever necessary and as directed by departmental officers. |
| 75 | Supplying and fixing of single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989, the cross band and face veneers are to be banded with phenol formaldehyde synthetic resin in hot press both sides and manufacturing the shutter by using quality timber of termite proof and seasoned to moisture content not more than 10%, hot pressed with hydraulic press at a temperature of 150o to the norms as per IS 2002-1983 and TW Ply on Both side with teak wood lipping around, 35mm thick including cost and fixing of Aluminium furniture fittings such as 5 no"s 5” hinges, 2 Nos 6" Tower bolt, 2 Nos 6" Handle, 1 no Aldrop 250mm long and 16mm dia, 1No 40mm dia & 60mm long rubber bush, 1 no Aluminium Door stopper with rubber bush with required Brass screws, labour charges for wrought and put-up and fixing in position of flush shutters and as directed by the departmental officers. |
| 76 | Supplying and fixing of Teak Wood wrought and put up for framesof doors, windows, ventilators, cupboard and any other similar joinery workswith necessary plugs, rebates for shutters, plaster grooves on all faces etc. , including labour charges for fixing hold fasts, complying with relevant standard specifications etc., in all respects. |
| 77 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. |
| 78 | Supplying and fixing of Jet Black granite slab flooring of approved colour and quality for flooring not less than 18mm thick over cement plastering in CM 1:3 (One of Cement and three of sand) 20 mm tk including laying in position cutting the tiles to the required size wherever necessary pointing the joints with coloured where cement curing etc all complete and as directed by the departmental officers (basic rate of granite considered 170/sqft) |
| 79 | Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation. |
| 80 | Supplying and fixing of 15 microns Anodised Aluminium Door made up of frame section of50.0x 44.50 x 1.90 mm for top, middle and vertical end for bottom 101.60 x 44.45 x 2.00 mm with clips. The intermediate panels are provided with Medium Density Fibre (MDF) Board - Exterior Grade - both sides pre-laminated, 12mm thick of approved ISI quality, 5.50mm thick plain glass,including cost of materials, Rubber beadings, locking arrangements, power supply, screws, TW plug, door stopper, Hydraulic Door Closer, hire charges for tools and plants and labour charges design as per drawing etc., all complete and as directed by the departmental officers. |
| 81 | Supply and fixing at site and fixing of SFRC manhole cover 900x900mm with framearrangement ofopening heavy dutyto with stand any type of impact load if any, confirming to I.S specifications etc., complete complying with standard specification and as directed by the departmental officers. |
| 82 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete complying with standard specifications |
| 83 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 125mm thickness and size as per drawing in M25 grade concrete, using following HBGS jelly including cost of reinforcement steel as per drawing in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors (Size of the slab as per drawing) etc., complete complying with standard specification and as directed. |
| 84 | Manufacturing, supplying and fixing of Precast Reinforced Cement Concrete slabs of 100mm thickness and size as per drawing in M25 grade concrete, using following HBGS jelly including cost of reinforcement steel as per drawing in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors (Size of the slab as per drawing) etc., complete complying with standard specification and as directed. |
| 85 | Supplying and fixing of PVC 110mm dia 6Kg/cm2 pipe of 0.15m length, 1no of CI Grating including cost of labour charges for cutting, fixing and cost of materials etc complete complying with standard specifications (Size of the slab as per drawing) and as directed by the departmental officers. |
| 86 | Providing weep holes in stormwater drain with necessary 110mm dia pipe (6kg/m2) 0.20m length, wire mesh screen ,necessary filling as per drawing etc complete complying with standard specifications and as directed by the departmental officers. |
| 87 | Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 6.0m depth, providing 160 mm dia slotted pvc pipes up to 6.0m,filling materials as specified as per drawing etc, complete complying with standard specifications and as directed by departmental officers |
| 88 | Design, Manufacturing and Testing at work and supply of FBEC Steel Water Tanks made out of Cold Rolled Steel confirming to IS-15961-2012, minimum thickness of 0.6mm with coating of Epoxy of Akzonobel and same is to be designed as per Australian Standards AS 2304. This Standard provides guidance on qualities that influence tank design and construction for water conservation measures. The inner surface should be provided with Reinforced PVC liner of minimum 0.55 mm thickness ( 760 GSM) should be UV Stabilised, Anti algae, USFDA 21 CFR 175.300 grade suitable for drinking water purpose. FUSION BONDSTEELCORRUGATED TANK WALL SHEET a) The wall of FBEC Tank should be circular in shape, Corrugated, panelled Bolted type.The wall of Steel tank should have coated in Blue colour with Fusion bond epoxy Steel baking in the furnace at (200-250 Deg C).The coating thickness should be between 100 to 200 microns on each side of the panel . b) The wall of Steel Tank should be designed as per structure design as per AS -2304 having tensile strength range minimum 300 MPA. c)The sheet dimension should be 3100 mm x 1100 mm OR as per design requirement. d)STEEL MAKE- TATA/JSW & EPOXY MAKE-AKZONOBEL PVC LINER Liner - Multi layered Reinforced PVC liner (0.55 MM (760 GSM) & Minimum Warp - 30 Kg & weft - 25 Kg) UV Stabilised, Anti algae, USFDA 21-CFR Food grade suitable for drinking water purpose or any equivalent certified. And the Make: SRF/Sieon/Ferrari. liner should be tested for 4, 00,000 folds and joints of the liner should be Hot –Welded with minimum joint width 100mm. ROOF SHEET – a) Roof Sheet should be designed and made out 0.5 mm (0.47 TFT) Steel Sheet and with Zincalume and Ms hot dipped galvanized trusses with thickness of 500-600 GSM Coating .The Roof top should be self-supported corrugated Dome as per Design and the tensile strength of 550 MPA. Roof sheet Design standard should follow AS/NZS code. b) The Trusses for Roofing should be MS Hot Dip Galvanized 500 – 600 GSM & The Roof structure should have load bearing capacity of 110 Kg/m2. c) Special quality Dust cum Verm tin proof tape/ Foam between the roof and tank wall. d) MAKE of Steel- TATA/ JSW including Air vent, Manhole, Nozzle, Ladders, Nut Bolt, Anchor fasteners, Level Indicator, all fittings, Erection and testing of complete as directed by Engineers. |
| 89 | Potable water Tank (Above Ground) - Dia 4.78m x 4.0m SWD + 0.2m FB (70 CUM) |
| 90 | Non-Potable water Tank (Above Ground) - Dia 2.58m x 3.0m SWD + 0.2m FB (16.72 Cum) |
| 91 | Fire water Tank (Above Ground) - Dia 6.88m x 4.0m SWD + 0.2m FB (150 CUM) |
| 92 | Supply, installation, testing and commissioning of diasel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520. b. 68 BHP, 1500 RPM water cooled with radiator, diasel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc. c. 110 litres capacity diasel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diasel return line port and fuel pre-filter, after filter etc. (Make: Kirloskar / Equivalent). d. Exhaust system having flexible metallic muffler, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition. e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required. f. 12 V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard, foundation bolts etc., as required. g. Positioning the diasel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement. All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. |
| 93 | Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Departmental Officers. |
| 94 | Supply, erection, testing and commissioning of 180 LPM, 70 metres Head Pressurization Pump with 10HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 95 | Supplying, installation, testing and commissioning ofFire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A. Common Panel in Fire Pump House (i). Incomer a. 1 No. 600A TP & N SDFU with HRC fuses b. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply c. 1 No. (0-500A) digital ammeter with selector switch & CTs d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses (ii). Outgoing a. Main Fire Pump 400 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessoriesand internalwiring requiredfor automatic operation, selector switch for auto / manual / OFF operation - 1 No. b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessoriesand internalwiring requiredfor automatic operation, selector switch for auto / manual operation - 1 No. c. diasel Engine Control comprising of: 1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode. 2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication. 3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter. 4. All standard relays and accessories for automatic operation of diasel engine. 5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 96 | Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including necessary MS supports, one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 97 | 250mm dia |
| 98 | 200mm dia |
| 99 | 150mm dia |
| 100 | 100mm dia |
| 101 | 65mm dia |
| 102 | 80 mm dia |
| 103 | 65mm dia |
| 104 | 50mm dia |
| 105 | 40mm dia |
| 106 | 32mm dia |
| 107 | 25mm dia |
| 108 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 109 | 250mm dia |
| 110 | 150mm dia |
| 111 | Supply, erection, testing and commissioning ofCast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 112 | 200mm dia |
| 113 | 150 mm dia |
| 114 | 100mm dia |
| 115 | Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., completed as per standard specification and as directed by the Departmental Officers |
| 116 | Pressure Switch for fire ring main Pipe line |
| 117 | a. Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers. b. 1 no. 150mm Butterfly Valve for Hyd system |
| 118 | Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anti corrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers. |
| 119 | 200mm dia |
| 120 | 150mm dia |
| 121 | Supply of NP3 Class RCC Pipe & Collars conforming to IS 458/2003 including cost of pipe as a finished work including all other incidental charges, testing charges including loading, unloading, transport and delivery in good condition at work site etc., complete, as directed by the Departmental Officers, as per standard specifications. |
| 122 | 900 mm dia |
| 123 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. |
| 124 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 125 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 126 | Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. |
| 127 | Supply, installation of Fire FightingApplication 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warmth clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers. |
| 128 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 129 | Supply, erection, testing and commissioning of Gun Metal Gate Valve (Heavy Duty) |
| 130 | 65mm dia |
| 131 | Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification. |
| 132 | Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 133 | Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. (Transformer yard & Electrical room) with Bucket Stand made using 50x50x6mm thick frame with one coat metal primer and two coat Post Office Red painting including conveyance and the buckets filled with Msand as per standard specifications and as directed by the Departmental Officers |
| 134 | Manufacturing, supplying and fixing PrecastCement Concrete block of sizeand size 450mm (L) x 300mm (W) x 300mm (H) in 1:2:4 mix concrete, using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting, finishing, curing and fixing in position, 1 no of ISMC 100 x 50 x 5 mm 0.90m height TEE shapeas per drawing etc., all complete complying with standard specification and as directed by the Departmental Officers |
| 135 | Supply, Installation, testing and commissioning of Electric Monoset centrifugal pump(The cost should be inclusive for 2 no"s (1 working + 1 standby) of capacity 100 LPM each pump and 15 m head each (Approximately 2 Hp) conforming to IS 9079:2002 as amended from time to time, with CI FG 200 Casing, hydraulically and dynamically balanced Bronze grade LTB-2 impeller, impeller ring and casing ring, stainless steel shaft capable of discharging required quantity of water against a total head noted below due to all causes. Pump shall of BEE 3 Star Rated and capable of discharging the specified quantity at the head noted at the minimum NPSHA at site conditions. The shut off head shall be at least 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase , 415 V+/- 10% , 50 Hz +/- 5%. Squirrel cage induction motor for continuous operation. The speed of the Pump and Motor shall be not less than 2700 to 2900 RPM respectively, the cost including centrifugal monobloc pump set - 2 no"s, single phase panel board with two level guard and auto start - 2 no"s, labour charges for fixing, transportation charges to site etc., all complete complying with standard specification and as directed by the Departmental Officers |
| 136 | Supplying, laying (Excavation & refilling), Jointing and testing of HDPE pipes, confirming to IS 4984:2016 UV stabilized & anti-microbial fusion welded, having the Rmtal stability including all fittings, trenching and refilling & testing of joints complete as directed by Engineers. |
| 137 | 50 mm OD, PE 100 PN16 |
| 138 | 63 mm OD, PE 100 PN16 |
| 139 | 110 mm OD, PE 100 PN6 |
| 140 | 140 mm OD, PE 100 PN6 |
| 141 | Supply and fixing of CI Single Air Valveas per ISI 14845 with all necessary accessories and fittings etc. as per directed by Engineers (For Potable & Non-Potable) |
| 142 | 15mm dia Air valve |
| 143 | Supplying and fixing of gate valve conforming to IS : 5154 (G.M. Gate valve)with pressure rating PN 10 etc. along with threaded joints complete including all accessories as per directed by DepartmentalOfficers |
| 144 | Gate Valve - 50 mm diameter |
| 145 | Supply and fixing of forged steel lift check valve as per ISO 15761, PN10 with all necessary accessories and fittings etc. as per directed by DepartmentalOfficers |
| 146 | 50mm dia check valve |
| 147 | Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vacuum tight up to 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside colour blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated up to 200 deg C) including all accessories complete and as directed by DepartmentalOfficers |
| 148 | 100 mm dia. butterfly valves |
| 149 | Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kilolitres / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ dia cast Aluminium/ Carbon steel with anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be dia-cast aluminium with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished. |
| 150 | DN100 Electromagnetic flow meter |
| 151 | Supply and fixing of Cable Float Switch for overhead tank (Potable & Non-Potable) with the range of 0 to 5m including all necessary accessories and fittings etc. as per directed by Engineers. |
| 152 | Supplying and fixing of porcelain wash hand basin (white without pedestal), superior variety of size550x400mm with all accessories such as powder coated cast iron brackets, 32mm dia C.P. waste coupling, Rubber plug and aluminium chain, 32mm dia "B" class G.I. / PVC waste pipe, Angle Valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap & required grating etc.,necessary fixing TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 153 | Supply and fixing of oval shape wash basin of size 560 x 450mm of best approved quality with ISI mark including cost PVC waste pipe, required grating, C.P.trap, Bob cock, PVC connections, C.P.waste plug with aluminium chain including labour charges for fixing clamps screws and solution of white cement etc. all complete in all respects as directed by the departmental officers |
| 154 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed on to wall |
| 155 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). |
| 156 | Supply and fixing in position of best Indian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.) |
| 157 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 158 | Supplying and fixing of SS Sink of size 1200 x 550 x 180mm , including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylon connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers |
| 159 | Supplying and fixing in position Indian make special type mirror of approved quality and brand PVC / Fibre Glass framed 1000 x 780 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, raw plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 160 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 161 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 162 | Supplying and fixing in position 15mm dia brass CPhealth faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 163 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 164 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 165 | 110mm dia PVC Pipe |
| 166 | 160mm dia PVC Pipe |
| 167 | Supplying, laying, fixing and jointing the following CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11 cost of suitable CPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixingon wall to the proper gradiant and alignment and redoing the chipped of masonry etc., as directed by the departmental officers. |
| 168 | 20mm Dia |
| 169 | 25mm Dia |
| 170 | 32mm Dia |
| 171 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 172 | 50 mm dia pipe |
| 173 | 75 mm dia pipe |
| 174 | 110 mm dia pipe |
| 175 | Supplying and fixing position of Nahani Trap of size 100 x 75mm with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 176 | Supplying and fixing 150mm x 100mm size PVC Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 112 mm thick using Fly ash brick (23x11.2x7.5cm) in cm 1:5 (One of cement and five and sand ) plastered with CM 1:3 (One of cement and three of sand) 12mm thick with precast cover slab including reinforcement etc., complete and as directed by the departmental officers |
| 177 | Supplying and fixing in position Urinal partition with WhiteMarble slab (Adanga) 18 mm to 20 mm thick of 4"0" 2"0" size and above of best quality including dismantling masonry, necessary and re-doing the same to original condition, etc., complete complying with standard specification. and as directed by departmental officers. |
| 178 | Supplying and laying the following uPVC pipes class SN 8, SDR-34, confirming to IS 15328-2003 and relevant specials including packing the joints with rubber /lubricant fixing ,holding wherever necessary and making good of the dismantled portion with necessary connectionsetc., complete in all respects and as per drawing No. MACE-P1047-SW-01. (Below Ground level) |
| 179 | 200 mm dia |
| 180 | Supplying and laying non pressure 200 mm dia NP-3 class R.C.C. pipes using sulphate resistant cement confirming to IS458-2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) includingtesting of joints etc. completein all respects and as directed by the engineer in charge.(using sulphate resistant cement) |
| 181 | Constructing ofcircular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top ,0.91 m deep and 600 mm dia S.F.R.C cover with frame (heavy duty,HD-20 grade designation) confirming to I.S 12592,, total weight of cover and frame to be not less than 182 kg sewer brick masonry in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement,including earth work excavation and refilling with good earth after completion of the work necessary water proofing and centering, shutteringetc all complete as per as per drawing. (Sulphate resistant cement should be used for all cement works) |
| 182 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m |
| 183 | Constructing of circular type manhole 1.22 m internal dia at bottom and 0.56 m dia at top and 1.68 m deep and 600 mm dia S.F.R.C cover with frame (heavy duty,HD-20 grade designation) confirming to I.S 12592,, total weight of cover and frame to be not less than 182 kg sewer brick masonryin cement mortar 1:4 (1 cement :4 coarse sand)inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including earth work excavation and refilling with good earth after completion of the work necessary water proofing and centering, shutteringetc all complete as per as per drawing.(Sulphate resistant cement should be used for all cement works) |
| 184 | Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m |
| 185 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 186 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 187 | Pipes,exceeding 80 mm dia, but not exceeding 300 mm dia for depth up to 1.50 m |
| 188 | Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). |
| 189 | Supplying and fixing MS manhole ventilating shaft pipe of 200 mm at bottom and 100 mm at top to a height of 7.60 m confirming to IS 1239/3589 including earth work excavation, the cost for laying PCCin 1:2:4 using 20 mm hard broken stone over a finished layer of PCC 1:4:8 using 40 mm hard broken stone etc complete as per drawing. |
| 190 | Design, construction, supply, Erection and commissioning of 30 KLD Sewage treatment plant designed to treat the raw sewage in a single stage fully automatic based on Cyclic Activated Sludge Technology. Including all infrastructure such as Civil works, electrical works, mechanical works, instrumentation with monitoring systemetc.,(with 1 year warranty) complete in all respects to achieve the excellent quality of treated effluent with characteristics as follow: |
| 191 | Supplying and laying of mexican lawn including site clearing work and soil preparation by Digging of soil, removal of all unwanted materials, rough leveling, supplying and spreading of the garden mixture over the garden area and incorporating with the parent soil and final shaping and planting etc., all complete and as directed by the departmental officers |
| 192 | Supply and planting different varieties of tall shrub plants and planting in positionincluding cost of plants, transportation charges and labour charges etc.,all complete and as directed by the departmental officers |
| 193 | Vertical TPN Distribution Boards Supply and installation of Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A), 6Way, MCCB + 18 Modules,following specification Incomer MCCB- 100A,4Pole MCB, --4Nos Outgoing MCB:63A TP-- 4nos , 32A SP MCB--6Nos etc., complete as directed and approved by engineer in charge |
| 194 | Distribution Board LDB Supply and installation of HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm.Industrial Type TPMCB DB with IP54 Protection 4ways 3 phase DB No. of ways incomer MCB / Isolator - 4 :40A, FP --1 No No. of ways incomer ELCB / RCD - 4: 40 Amps, 30 mA --1 No No. of outgoings ways ( SP MCB)- 12: 6/32A SP --12 Nos etc., complete as directed and approved by engineer in charge |
| 195 | Distribution Board PDB Supply and installation of HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. Industrial Type TPMCB DB with IP54 Protection : 4ways 3 phase DB No. of ways incomer MCB / Isolator - 4 :63A, FP -- 1No No. of ways incomer ELCB / RCD - 4:63 Amps, 30 mA--1No No. of outgoings ways ( SP MCB)- 12: 6/32A SP --12 Nos etc., complete as directed and approved by engineer in charge |
| 196 | SINGLE PHASE DISTRIBUTION BOARD Supply and installation of SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 way / 8 way / 12 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm.Industrial Type SPMCB DB with IP 54 Protection 8ways single phase DB No. of ways incomer MCB / Isolator - 2: 40A, 2pole--1No No. of ways incomer ELCB / RCD - 2 : 40A, 30mA,2pole--1No No. of outgoings ways - 6 :6/32A SP MCB--6Nos etc., complete as directed and approved by engineer in charge |
| 197 | Sub Power Panel: ( Manufacturing Unit ) Design, assembly, wiring, supply, installation, testing and commissioning of CPRI / ERDA tested floor standing with arrange of MS stand for floor grouting , single front, fully compartmentalized, double ended, IEC 60439 compliant, 14 G CRCA sheet steel fabricated IP 42 protected complete as per specification, comprising of the following major switchgear/ devices / components and form-IIIB form of construction as per SLD. The panel should be comprised of the Protection as per ANSI code 27, 50, 51, 50N, 51G, 81, 64R & 86 for EB & DG I/C Feeder including necessary CT & PTs. Metering: Digital multi-function meter with necessary CTs (V,A,Hz, kW, kWh, kVA,kVAR, PF etc), with RS 485 communication, Digital energy meter with necessary CTs.AMF relay including auto / manual selection with necessaryinterconnection and electrical interlock. Indications Lamps: Cluster type LED indication lamps for 3 phases Healthy Indication, ON, OFF, TRIP, local, remote in each of the two-incomer compartments. Busbar : 250A, 36 kA/1 sec., 415 Volts, TPN (100 % neutral), 50 Hz Aluminium bus bars. Incoming: 1 No. each of 250A, FP MCCB, 36kA with based O/C, S/C & E/F r. Outgoing: 100 A ,TPN MCB, - 1 Nos. 63 A,TPNMCB , - 5Nos. etc., .. complete as directed and approved by engineer in charge |
| 198 | Feeder Pillar Box: Design, manufacture, supply, erection, testing and commissioning of 415 V street lighting feeder pillar panel 900mm x 900mm x 300mm suitable for outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, with 2 coat of primer and 2 coats of aluminium finish with 1no. 125 A TPN MCCB with 16 kA breaking capacity in the incoming and 8 no"s 32 A,TPN contactor 10nos. 32A TPN MCCB, 24 no"s, 10A SP MCB as outgoing, automatic dawn and dusk with cyclic timer control for street light outgoing and adequate plate to terminate suitable cable as incomer and suitable cable as outgoing. energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital multifunctional meter with RS485 port and suitable CT etc., including the pillar to be erected with suitable angle iron frame pedestal with concrete grouting etc., complete complying with standard specifications and as directed bysite engineer in charge. |
| 199 | Supply, Erection of 8m Free Standing Single /Double Arm Bracket 8 sided Octagonally continuously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron etc. complete complying with standard specifications and as directed bysite engineer in charge. |
| 200 | Double Arm Bracket Post |
| 201 | Single Arm Bracket Post |
| 202 | Supply, installation, testing and commissioning of 80W LEDcool day light highbay luminaries with more than 90% efficiency with inbuiltHigh Surge Protection with IP65 protection , glare free light, suitable for industrial high ceiling area day light colour LEDinter connecting wiring including accessories all inclusive. etc., complete as directed and approved by engineer in charge |
| 203 | Supply, installation, testing and commissioning of 36W LED Square type( 2ftx2 ft)with cool day light made out of CRCA powder coated body, aluminium reflectors,poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. |
| 204 | Supply, installation, testing and commissioning of 18 W LED down lighter fittingwith cool day light made out of CRCA powder coated body, aluminium reflectors,poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.etc., complete as directed and approved by engineer in charge |
| 205 | Supply, installation, testing and commissioning of 40W, 4ft LED tube light fittingwith cool day light made out of CRCA powder coated body, aluminium reflectors,poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. etc., complete as directed and approved by engineer in charge. |
| 206 | Supply, installation, testing and commissioning of 20W, 4ft LED tube light fittingwith cool day light made out of CRCA powder coated body, aluminium reflectors,poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. etc., complete as directed and approved by engineer in charge. |
| 207 | Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning ofstreet lighting fixtures suitable for 120 W LED street light fitting with cool day light, made out of pressure dia cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive. |
| 208 | Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning ofstreet lighting fixtures suitable for 80W LED street light fitting with cool day light, made out of pressure dia cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive. |
| 209 | Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning ofstreet lighting fixtures suitable for 150W LED flood light fitting with cool day light, made out of pressure dia cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive |
| 210 | Supply and fixing of 300mm (12") sweep (light duty), 1400 RPM, 230v AC exhaust fan complete with necessary wall opening andmaking good of the wall etc., complete as directed and approved by engineer incharge |
| 211 | Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18"). etc., complete as directed and approved by engineer in charge |
| 212 | Supply & Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with MS switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) etc., complete as directed and approved by engineer in charge |
| 213 | Supply and Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with MS switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)etc., complete as directed and approved by engineer in charge |
| 214 | Supply and run of 3 x 2.5 sq.mm. (36 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid PVC conduit concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. Etc., complete as directed and approved by engineer in charge |
| 215 | Supply & Wiring with 3 x 2.5 sq.mm (36 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm MS switch box with 3mm thick hylem sheet for 5/15A 3 pin non inter locking wall socket with 15A flush type switch withand making good of the concealed portion with suitable colour for concealed power plug point.etc., complete as directed and approved by engineer in charge |
| 216 | Supply and run of 3 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. etc., complete as directed and approved by engineer in charge |
| 217 | Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray |
| 218 | Supply and laying of the followingPVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cablecompletely with bricks and sand and refilling the earth to make good and as directed by the site in charge Engineer . |
| 219 | 3.5 x240 sq.mm. PVC LTUG armoured cable |
| 220 | 3½ core x 70 sq.mm Ar. Alu. UG cable |
| 221 | 3.5 x50 sq.mm. PVC LTUG armoured cable |
| 222 | 3.5x35 sq.mm. PVC LTUG armoured cable |
| 223 | 3.5x25 sq.mm. PVC LTUG armoured cable |
| 224 | 4core x 10 sq.mm Ar. Alu. UG cable |
| 225 | 4core x 6 sq.mm Ar. Alu. UG cable |
| 226 | 2 x6 sq.mm. PVC LTUG armoured cable |
| 227 | Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc., for following sizes of cablesetc., complete as directed and approved by engineer in charge |
| 228 | 3.5 x240 sq.mm. PVC LTUG armoured cable |
| 229 | 3½ core x 70 sq.mm Ar. Alu. UG cable |
| 230 | 3.5 x50 sq.mm. PVC LTUG armoured cable |
| 231 | 3.5x35 sq.mm. PVC LTUG armoured cable |
| 232 | 3.5x25 sq.mm. PVC LTUG armoured cable |
| 233 | 4core x 10 sq.mm Ar. Alu. UG cable |
| 234 | 4core x 6 sq.mm Ar. Alu. UG cable |
| 235 | 2 x6 sq.mm. PVC LTUG armoured cable |
| 236 | Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete as directed and approved by engineer in charge |
| 237 | 3.5 x240 sq.mm. PVC LTUG armoured cable |
| 238 | 3½ core x 70 sq.mm Ar. Alu. UG cable |
| 239 | 3.5 x50 sq.mm. PVC LTUG armoured cable |
| 240 | 3.5x35 sq.mm. PVC LTUG armoured cable |
| 241 | 3.5x25 sq.mm. PVC LTUG armoured cable |
| 242 | 4core x 10 sq.mm Ar. Alu. UG cable |
| 243 | 4core x 6 sq.mm Ar. Alu. UG cable |
| 244 | 2 x6 sq.mm. PVC LTUG armoured cable |
| 245 | Supply,laying and testing of 3 core x 2.50 sq.mm PVC insulated SC unsheathed Cu.cable conductor cable of 1100 V grade with necessary jointing materials etc., complete including cost and conveyance of cable and labour charges for laying the cable etc. complete complying with appropriate specification /standards and complete complying with standard specifications and as directed bysite engineer in charge. |
| 246 | Supply & fixing of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth...complete complying with appropriate specification /standards and as directed by site engineer in charge. |
| 247 | Supply and installation of Copper plate Earthing as per the ISI specification with a square copper plate must be at least 600mm × 600mm x 3.18 mm in size, with copper strip serving as the earth lead. The plate is inserted vertically in the earth hole at a depth of at least 3 metres (10 feet), below ground level in both circumstances with necessary funnelling arrangements with necessary masonry work and with 38mm RCC pre cast cover slab for the brick masonry etc all complete |
| 248 | Supply and installation of 50 mm dia, OD, 4kg/cm2, PVC rigid pipes including laying charges in street light pole foundation for power cable entry. Complete, as per standard specification. |
| 249 | Supply ,Excavation and laying of 300mm dia RCC NP3 Hume Pipe for Electrical cable road crossing. |
| 250 | Supply & installation of Cable markers made of galvanised CI circular 100 mm. dia. with "LT CABLE"markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level. (At every 30m of cable) etc., complete as directed and approved by engineer in charge |
| 251 | 5 KVA, 1 PHASE UPS (Single Phase In & Single Phase Out) with 1 hour back-up.etc., complete as directed and approved by engineer in charge |
| 252 | Supply, Installation, testing & Commissioning of 1.5 TR Split Type AC Unit( 5 Star Rated) with supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relayalong withSupply and fixing of MS stand for fixing outdoor unit, Necessary coper pipe. |
| 253 | 11kV 2pole Structures: Supply, installation, & commissioning of Providing 11kV Double Pole Structure with AB Switch 12kV, 630A, 25kA for 3sec, 3-ph, 3 Pin type, Vertical/ HorizontalMounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings onPoles as per technical specification, approved drawings and scope of work. etc., complete as directed and approved by engineer in charge. |
| 254 | 11 KV OUTDOOR VACCUM CIRCUIT BREAKER: Design, Engineering, Manufacture, Assembly, Inspection and Testing before supply, Packing and delivery at site, erection, installation, testing & commissioning of 11 kV HT switchgear with all accessories and suitable for installationin three phase, three wire,11 kV, 50 Hz, A.C. distribution network. complete with all accessorieserected in the provided foundation complete as per specification and standards as directed by engineer in charge at site. Outdoor type, 11 KV, ,630A, 25 kA, for 3 sec HT Outdoor Single Panel Vacuum Circuit Breaker complete as per specification the Vacuum Circuit Breaker (VCB) feeder shall Comprise of1 No. 11 KV, 630A, 25 KA, 630 A, for 3 sec, Auto & manual operated VCB, The panel shall be suitable for out door mounting and terminating of 3C x 240 sq.mm. HT XLPE 11KV (E) SISMV11E3 x 2402797 as incoming and outgoing etc,. complete as directed and approved by engineer in charge |
| 255 | 11kV HT Transformers Supply, erection, testing and commissioning of 500 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2) copper wound, outdoor distribution transformer, ONAN, DYn11,with Off load tap changer range from +5% to -10% in steps of 2.5% with 6 steps / 7 positions, complete with first oil filled, with suitable cable box for HT side termination and in LT side termination complying to IS 2026, including transportation, unloading at site, all control cables between transformer Marshalling box to MV Panel,in the constructed foundation for transformer plinth above FGL, mounting channelling etc., all inclusive. (As per IS 1180-Level 2) etc, complete as directed and approved by engineer in charge. |
| 256 | Supply &Laying of 3C X 240sq.mm.HT XLPE 11KV (E) SISMV11E3 x 3002797 XLPE insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench.( rate shall include cost of excavation of trench) as per technical specification, approved drawings and scope of work.etc,. complete as directed and approved by engineer in charge |
| 257 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of240-300 sq.mm. 3 core HT Cable Outdoor Terminations XLPE 11KV (E) - EPKT 3372 etc,. complete as directed and approved by engineer in charge. |
| 258 | DG Set Supply, erection, testing, commissioning of 500KVA, 415 V, 3 phase, 50 Hz, DG Set suitable for synchronisation with diasel engine at 1500 RPM coupled with alternatormounted on a channel Iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosure , control panel, inter connecting control cable, cable end termination, including lubrication system, cooling system, all inclusive. DG set should comply with central pollution control board (CPCB) norms as per the latest environment (protection) rules, etc.., .complete as directed and approved by engineer in charge |
| 259 | 200kVAR APFC capacitor panel - Supply, installation, testing and commissioning of 200KVAR Automatic power factor correction panel (APFC) with capacitor switchingcubicle type, free standing, powder coated, 14 G CRCA sheet steelenclosed separate compartment for each capacitor, front operated, indoor type dust & vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, with appropriate no of stage Digital Automatic power factor correction controller, Auto / Manual selector switch, cluster LED typeindicators, in the incomer,complete with 480 Volts MPP type Power capacitors, MCCB’s, timer, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth & painting, Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc., all inclusive. etc., complete as directed and approved by engineer in charge. |
| 260 | Main LT panel: Design, supply, assembly, wiring, supply, installation, testing and commissioning of CPRI/ERDA tested floor standing, single front, fully compartmentalized, double ended, IEC 60439 compliant, 14 G CRCA sheet steel fabricated IP 65 protected complete as per specification, comprising of the following major switchgear/ devices / components and form-IIIB form of construction as per SLD. Protection 27, 50, 51, 50N, 51G, 81, 64R & 86 for Transformer Incomer Feeder. Including necessary CT for 51G 27, 50, 51, 50N, 51G, 81 & 86 for diasel Generator Incomer Feeder. Including necessary CT for 51G Metering Digital multi-function meter with necessary CTs (A, V, kW kWh, kVA, RkVA, PF), with RS 485 communication, Digital energy meter with necessary CTs Power pack with battery backup for ACB operation. AMF relay including auto / manual selection with necessaryinterconnection and electrical & Mechanical interlock . Indications: Cluster type LED indication lamps for 3 phases, ON, OFF, TRIP, local, remote in each of the two-incomer ACB compartments. Busbar 1000A, 50 kA/1 sec., 415 Volts, TPN (100 % neutral), 50 Hz Aluminium bus bars Transformer incomer: 1 No. each of 1000A, FP EDO, ACB, 50 kA with Microprocessor based O/C, S/C & E/F releases with E&M interlock with DG incomer. DG incomer 1 No. each of 1000A, FP EDO, ACB, 50 kA with Microprocessor based O/C, S/C & E/F releases with E&M interlock with EBincomer. Outgoing: 630 A, ACB- 01 Nos. 630 A, TPN MCCB 50 kA, - 1 Nos. 125 A, TPN MCCB 36 kA, - 2 Nos. 100A, TPN MCCB 25 kA, - 3 Nos. 100 A, TPN MCB Isolator 25 kA, - 1 Nos. 63 A, TPN MCB Isolator 25 kA - 1 No etc., complete as directed and approved by engineer in charge. |
| 261 | Supply and laying of the followingPVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cablecompletely with bricks and sand and refilling the earth to make good and as directed by the site in charge Engineer . |
| 262 | 3.5core x300 sq.mm Al. Ar. UG cable |
| 263 | Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc., for following sizes of cablesetc., complete as directed and approved by engineer in charge |
| 264 | 3.5core x300 sq.mm Al. Ar. UG cable |
| 265 | Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete as directed and approved by engineer in charge |
| 266 | 3.5core x300 sq.mm Al. Ar. UG cable |
| 267 | Supply, installation, testing & Commissioning of Copper plate Earthing as per the ISI specification with a square copper plate must be at least 600mm × 600mm x 3.18 mm in size, with copper strip serving as the earth lead. The plate is inserted vertically in the earth hole at a depth of at least 3 metres (10 feet), below ground level in both circumstanceswith necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete as directed and approved by engineer in charge |
| 268 | Supply and laying of 50mm x 6mm GI hot dip flat with necessary clamps / supports on wall / floor / ground for earth connection |
| 269 | Supply and laying of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection |
| 270 | Supply and laying of 50mm x 6mmcopper flat with necessary clamps / supports on wall / floor / ground for earth connection |
| 271 | Supply, installation, testing, commissioning of of 4MP, Outdoor PTZ CAMERA (including lens, bracket, housing) of following technical specification : IP 4MP 4 MP 25 × Network IR Speed Dome PTZ Camera Specs:1/2.8" progressive scan CMOSUp to 2560 × 1440@30fps resolution Excellent low-light performance with powered-by-Dark Fighter technology25 × optical zoom, 16 × digital zoomWDR, HLC, BLC, 3D DNR, Defog, EIS, Regional Exposure, Regional Focus Up to 100 m IR distance12 VDC & PoE (802.3 at, class 4) Support H.265+/H.265 video compression Image Sensor 1/2.8" Progressive Scan CMOS, 2 Megapixel (minimum). Min. Illuminations: At least Colour: 0.0186 lux /F 1.6), B/W: 0 Lux with IR. Shutter Speed: 1/3 s to 1/30.000 s. Wide Dynamic Range: 120 dB or above. Focal Length: At least 4.8 to 135 mm. Optical Zoom: 30X or above. Digital Zoom: 12x: Focal Length & FOV 58.3"-2.6" `. Aperture Range: At least F1.6 - F4.4. Supplement Light Type: IR, IR Range: minimum 180 m. Pan/Tilt range: 0°-360°; -15°-90° or -90° to 20°(auto flip). Pan speed: pre-set speed :240°/s. Tilt speed:pre-set speed: 160°/s. Presets: minimum 256. Max. Resolution: 1920x1080 or above. Mainstream: Mainstream: 1920x 1080 (1fps-25 fps) with at least 1 substream Video Compression: H.265/H.264/MJPEG.Audio Sampling Rate: 8Wlz. /16 kHL/32 kHzJ44.l Wlzl48 kHz. API: ONVIF (Profile S/Profile C/Profile T). Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP,RTSP, NTP, UPnP, SMTP, ICMP,802.1X, QoS, IPv4. lPv6. UDP, PPPoE. ARP, SNMP etc SNR: >56dB.Daylight Switch: Day, Night, Auto, Schedule . Alarm: 1 input, 1 output. Audio: 1 input (line in), 1 output (line out). On`-Board Storage: Micro SD. Ethernet interface: RJ45 (10/100 Base-T). Basic Event: Motion detection, video tampering alarm. Power Supply: DC lzV /24V/AC 24 V (*30%), PoE (802.3 at /af). Power Consumption: maximum 25Watt .Camera Material: Metal. Operating Temperature: -43° C to +50° C for and humidity continuous operation Humidity: 5% to 90% RH noncondensing. Protection: IP 66 or above. Certifications: CE, UL, FCC. etc,...complete as directed and approved by engineer in charge. |
| 272 | Supply, installation, testing, commissioning of approved makeIP - 5MP - Bullet CameraAcuSense Fixed Mini Bullet Network Camera of following technical specification Supply ofIP 5MP Bullet Camera High quality imaging with 2 MP resolution Excellent low-light performance with powered-by-Dark Fighter technology,: Image Sensor 1/2.7" Progressive Scan CMOS Min. Illumination Color: 0.01 Lux @(F1.2; AGC ON), 0.028 Lux @(F2.0; AGC ON) Shutter Speed 1/3 s to 1/100,000 s Slow Shutter Yes Auto-Iris No Day & Night IR Cut Filter Digital Noise Reduction 3D DNR Wide Dynamic Range 120 dB 3-Axis Adjustment Pan: 0°to 360°, tilt: 0°to 180°, rotate: 0°to 360 Focal Length 2.8/4/6 mm Aperture F2.0 Focus Fixed Lens Mount M12 IR Range Up to 40 m and dust resistant (IP67),etc. as accepted approved by the Engineer in Charge |
| 273 | Supply, installation, testing, commissioningof 16 Channel - 2 SATA (2 Nos. Hard Disk)1 NETWORK VIDEO RECORDER (NVR) of following technical specification or equivalent : IP Camera input: 16 channels Network. Bandwidth: Incoming-160 Mbps or above, Outgoing - 128 Mbps or above HDMI Output:4K, 2K, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video Output Mode: HDMI/VGA independent output; Audio Input 1-ch, RCA (2.0 Vp-p, 1 KO); Audio Output: 1-ch, RCA (Linear, 1 KO); Decoding Format: H.265/H.265+/H.264/H.264; RecordingResolution: MP/6 MP/5 MP/4P/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF ;Decoding Capability: 2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps) ; Network Protocol : TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP,HTTP, HTTPS;Synchronous Playback:16-ch; Network Interface: 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface;SATA : 2 SATA interfaces; Capacity: Up to 10 TB capacity for each HDD;USB Interface: Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0; Alarm In/Out: 4/1; Power Supply 12 VDC, 3.33 A; Power Consumption: 15 W; Working Temperature -10 °C to 55 °C; Working Humidity: 10 to 90 %;Certifications: CE,FCCor equivalent AS accepted approved by the Engineer in Charge. |
| 274 | Supply and fixing of 8 TB Surveillance Hard Disk Drive for NVR of following specification or equivalent:Storage 8 TB."Form Factor (inch) 3.5 Inch. Interface. SATA 6cb/s .RPM 72OO RPM. Buffer 256MB. Data Transfer Rates: 248MB/s or higher. MTBF 1,000,000 hours or higher. Or as Accepted/ Approved by the Engineer in Charge. |
| 275 | Supply, installation, testing, commissioning of approved make24 Port PoE SWITCHES FOR CCTV IP CAMERAor as accepted. / Approved by the Engineer in Charge. |
| 276 | Supply, installation, testing, commissioning of approved makemedia converter for OFC cable etc., as perAccepted. / Approved by the Engineer in Charge. |
| 277 | Supply and fixing of Junction box for Camera with power arrangementforPoE switch and Other accessories including TB ,MCB and Earthing provision etc. Accepted / Approved by the Engineer in Charge |
| 278 | Supply, laying, testing, commissioning of approved make 6 Core Multimode OFC Cable armoured, PVC insulated cable with required end splicing, and termination connectors, and OFC to RS 485 converters etc., as required laid in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). in suitable surface / concealed PVC conduit as required including all accessories as required. |
| 279 | Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., as required Accepted. / Approved by the Engineer in Charge. |
| 280 | Supply and laying of Category 6 U/UTP 4 Pair 23 AWG Cable with suitable PVC Conduit Accepted. / Approved by the Engineer in Charge. |
| 281 | Supply, installation, testing, commissioning of approved make Patch Cord 1. |
| 282 | Supply and fixing of 43" Full HD Monitor of following technical specification or equivalent: Screen Size: 43”. Resolution: I920x 1080 (FHD) . HDR (High Dynamic Range). HDR 10+: Support Contrast Enhancer: Yes. Auto Motion Plus: Yes .Dolby Digital Plus : Yes Sound .Output (Rates) : 20w .Speaker Type : 2CH . Active Noise Reduction yes. Aspect ratio: 4:3 /16.9. Wide Screen : yes . Sound Mirroring: Yes. Wi-Fi Direct: Yes. HDMI: 2 (with minimum 3-meter HDMI Cable). USB: 1. Power Supply: AC220-240V 50/60Hz Power Consumption (Max) 115 W . Accepted. / Approved by the Engineer in Charge |
| 283 | Supply & laying 20 Metre HDMI Cable as Accepted. / Approved by the Engineer in Charge. |
| 284 | Supply, installation & commissioning of9U RACK Network Rack with fitting Accessories Fan extra for the above rack etc,. As Accepted. / Approved by the Engineer in Charge. |
| 285 | Supply, installation, testing, commissioning of approved make 8 m height Galvanised Iron powder coated pole with fixing including all necessary materials as required. Accepted. / Approved by the Engineer in Charge |
| 286 | Supply & Installation Accessories Cable Gland ,Lugs ,Ferrules other miscellaneous items such as SD cards Etc.,as Approved by the Engineer in Charge |
| 287 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad in which the LCD clearly indicates the location of fire, Fault & Supervisory. And minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The FACP should give audio and visual indication for main and/or standby power supply failure. The system shall support password protection type levels and the panel shall have facility to connect printer to printout log and facility to have seamless integration with analogue/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The FACPs shall be provided with earthing terminals with cable entry provisions..The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. or as per the engineer-in charge approval. |
| 288 | Supplying, installation, testing & commissioning of addressable fire control module complete as required etch. Complete as per specifications. or as per the engineer-in charge approval. |
| 289 | Supplying, installation, testing & commissioning of intelligent analogue addressable multi detector complete with mounting base complete as required.etc,. complete as per specifications. or as per the engineer-incharge approval. |
| 290 | Supplying, installation, testing & commissioning of addressable manual call point complete as required etc., complete as per specifications. or as per the engineer-in charge approval. |
| 291 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required etc., complete as per specifications. or as per the engineer-in charge approval. |
| 292 | Supplying & laying of 2Cx1.5 sum fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required or as per Engineer in-charge |
| 293 | Programming Charges |
| 294 | Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field. The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (?Ts) obtained during the lab test for the offered model is 60 µs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is available to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level, etc.. complete complying with standard specifications and as directed bysite engineer in charge. |
| 295 | Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter etc.. Complete complying with standard specifications and as directed bysite engineer in charge. |
| 296 | Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specifications and as directed bysite engineer in charge. |
| 297 | Supply of Test Link Box for Nos Down conductor in order to disconnect the earth termination system to enable measurement of resistance |
| 298 | Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
