}

Tender For Ferritic Steel Sheet 12X1250x3000mm, kapurthala-Punjab

Rail Coach Factory has published Tender For Ferritic Steel Sheet 12X1250x3000mm. Submission Date for this Tender is 09-04-2024. Miscellaneous Fasteners Tenders in kapurthala Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

43067339
Tender For Ferritic Steel Sheet 12X1250x3000mm
Tender
Indian
Punjab
Kapurthala
09-04-2024

Tender Details

Supply Of Ferritic Steel Sheet 12X1250x3000mmferritic Steel Sheet 12X1250x3000mm, Ferritic Steel Sheet 12X1250x3000mm., As Per Drawing: Is:6911-1992, Grade X04cr12 ( 405 ) , Surface Finish 2D As Per Table 8., Packing Instruction: Stainless Steel Sheets, Coils An D Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Prot Ected In Reasonably Good Condition To Withstand Normal Handling Hazard During T Ransit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrappe D With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be W Rapped With A Layer Of Biodegradeable Sheet. Iii ) Outer & Inner Of Coil Should Be Wr Apped With Gi Sheet. Iv ) Side Of The Coil Should Be Covered With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biodegradeable Plastic Sheet Of Suit Able Thickness. Vi ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Follow Ed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. V Iii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix ) Whole Coil Sh Ould Be Mounted On Wooden Blocks For Easy Lifting / Stacking. X ) The Sheets In Coil F Orm For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thicknes S Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weig Ht Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austenitic & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Eac H Sheet / Plate Shall Be Seprated With A Layer Of Water Proof Paper, After This The W Hole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biod Egradeable Plastic Sheet Of Suitable Thickness. A Metal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Len Gth And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provi Ded With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Mechanical Dama Nge & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Perio D: 30 Months After The Date Of Delivery ] => Limited

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail