Military Engineer Services-MES has published Tender For Additional /Alternator To Building No P-30, P-1068 And Car Parking Shed Under Age B / R Iii At Chandimandir. Submission Date for this Tender is 14-11-2023. Building Work Tenders in chandimandir Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-11-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 20 cm deep and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 3 | Demolition of brick work built in cement mortar , complete all as specified and directed. |
| 4 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets , complete all as specifed. |
| 5 | Taking down chowkats or frame exc. 1.5 Square metreand n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. |
| 6 | Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed. |
| 7 | Surface dressing n exc 15 cm deep in soft and loose soil complete all as specified and directed. |
| 8 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. |
| 9 | Removal excavated soil to a distance exc 250 but n.exc 500m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point complete all as specified & directed by Engineer-in-Charge. |
| 10 | Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed. |
| 11 | Plain cement concrete 1:3:6 type D2 using 40mm graded stone aggregate to embedding the fencing post/ struts complete all as specified and directed. |
| 12 | Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 13 | Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed. |
| 14 | Brick work with sub class ‘B’ bricks ofold size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 15 | Soling (or sub base)150mm thick with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed. |
| 16 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 17 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring etc, complete all as specified and directed. |
| 18 | Factory made coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick , set, jointed and pointed in neat cement slurry with grey cement and pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 19 | Glazed ceramic coloured printed tiles 7 mm thick of size 300mm x 450mm/350mm x 250mm as in skirting, dado or wall,set and jointed in neat cement slurry and grouted in white cement completeover and including 10mm thick bedding layer in CM 1:4complete, all as specified and directed. |
| 20 | Non skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. |
| 21 | Vitrified ceramic tiles 10mm thick (square / rectangular) polished, dark shade, area of each tiles e n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6complete all as specified and directed |
| 22 | Machine pressed Concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Gradelaid over and including 25mm thick sand cushioning , complete all as specified and directed |
| 23 | Machine pressed Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Gradelaid over and including 25mm thick sand cushioning , complete all as specified and directed |
| 24 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 25 | 40mm thick PCC 1:2:4(using 12.5mm graded stone aggregate) Damp proof course to horizontal or vertical surfaces including necessary formwork complete, all as specified and directed. |
| 26 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , rough finished surface of concrete compelte all as specified and directed. |
| 27 | Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetc rough finished surface of concrete flat complete all as specified and directed. |
| 28 | Form work to flat surfaces of suspended slabs such as roof slab, floor slab, landing, shelves etc not exceeding 200mm thick,including edges in any position, rough finished surfaces, complete all as specified and directed. |
| 29 | Spreading and levelling of earthin layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and directed. |
| 30 | 75mm thick PCC 1:3:6type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, all as specified & directed by Engineer-in-charge. |
| 31 | Hard core ofbroken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 32 | Rendering 15mm thick in Cement and Sand mortar 1:4 overfair faces of brick / concrete ,finished even and smooth without using extra cement, inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately. |
| 33 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 34 | Rendering 15mm thick in Cement and Sand mortar 1:4 overfair faces of brick / concrete ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 35 | Rendering 10mm thick in Cement and Sand mortar 1:6 overfair faces of brick / concrete ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 36 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified and directed. |
| 37 | Three coats of white wash on wall surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 38 | Two coats of oil bound distemper over a coat of primer including preparation of new surfaces (plastered / unplastered) and applying wall are putty, not less than 2mm thick on wall including prepartion of plastered surfacecomplete all as specified and directed. |
| 39 | Reinforced cement concrete 1:1½:3(nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, all as specified and directed . |
| 40 | Reinforced cement concrete 1:1½:3(nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in chajjas, parapets, facia etc, all as specified and directed . |
| 41 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint , complete all as specified and directed. |
| 42 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified and directed. |
| 43 | Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , complete all as specified & directed by Engineer-in-Charge. |
| 44 | Rolled sections as in main and cross beams, hip and jack rafters,purlins where connectedto common rafters and running rails and guidesforsliding doors, fixedwithangle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed. |
| 45 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 46 | Precast cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articlesincluding chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete complete all as specified and directed. (Precast cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately. |
| 47 | Mild steel TMT bars 10mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 48 | Mild steel TMT bars 6mm to 8mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 49 | factory made solidPVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 50 | Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin,supplying & fixing in frame at site complete all as specified and directed. |
| 51 | 25 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 53 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 54 | Vitreous china counter top wash hand basin of size 730 x 415mm x 135mm mounted on granite stone slab platform by cutting for waste fittings, brass chromium platedcoupling,CP pillar tap,15mm bore PVC conection, 450mm long PVC waste pipe , fixed oncomplete all as specified & directed by Engineer-in-charge. |
| 55 | 15-18mm thick black granite slab (of any type & shade as approved),width and length as ordered, best qualitymachine cut to be fixed on steps, jambs, pillars, window-cills, cooking platforms and likeand jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 56 | Factory made box typesteel ventilators, openable with top hung shutters with box type hinges including oneshop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded,complete all as specified and directed. |
| 57 | 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 58 | Supply only 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 59 | 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 60 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 61 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, brass gate valves, completeall as specified in SSR Part-I and all as directed by Engineer-in-charge. |
| 62 | Bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed. |
| 63 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 64 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe,complete all as specified and directed. |
| 65 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe,complete all as specified and directed. |
| 66 | 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed. |
| 67 | 150 mm aluminium handles cast typecomplete all as specified and directed. |
| 68 | 100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed. |
| 69 | 250 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 70 | Peg hook set of 6 of aluminum body, complete all as specified and directed. |
| 71 | Towel rail 600mm long ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), complete all as specified and directed. |
| 72 | PVC (SWR) floor trap, plain with grating includingjointing with solvent cement100 mm bore, including jointing to waste pipe set in cement concrete type , complete all as specified. |
| 73 | PVC(SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints,laid in trenches or in floor, complete all as specified and directed. |
| 74 | PVC(SWR) 75mm bore, single socketed in any length as in waste and vent pipewith rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, complete all as specified and directed. |
| 75 | 110 mm bore PVC (SWR) bends of any radius complete, all as specified and directed. |
| 76 | 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 77 | 75mm dia PVC (SWR) vent cowlcomplete all as specified and directed. |
| 78 | Vitreous china squatting pan "orissa" pattern,size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor, complete all as specified & directed. |
| 79 | Vitreous china, wash down water closet pan, white, pedestal pattern with PVC seat cover and chromium plated jet (excluding, flushing cistern and flush pipe), complete all as specified and directed. |
| 80 | Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 81 | Toilet paper holder, cast copper alloy, chromium plated,fixed in position, complete all as specified and directed. |
| 82 | White PVC valvelessflushing cistern (Duel type) of capacity 10 litres, syphonic action , low level with inlet, ball valve, float, handle, PVC connection &32mm dia CP flush pipe (long type for squatting pan) incl brackets, complete all as specified and directed. |
| 83 | PVC connection 15mm size with PTMT nuts of length 450mm longcomplete all as specified and directed. |
| 84 | Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains etc like including necessary form work/ moulds complete all as specified & directed |
| 85 | Material and labour for salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed. |
| 86 | Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 87 | 5mm thick PVC sheet fillet of width 35mm for wall and fixed to wall by means of rawl plugs to make PVC Frame as per specification complete all as specified and directed. |
| 88 | Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 4mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin complete all as specified and directed. |
| 89 | Perforated particleboard/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap gridSupply only prelaminated particle board 7mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed. |
| 90 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Note : Glass and wire meshshall be measured and paid seperately |
| 91 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 92 | Supply only Stainless steel wire cloth,0.56 mm nominal dia of wire and average width of aperture 1.18 mm , fixed with stainless steel wire staple/ wooden beads,complete all as specified. |
| 93 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, all as specified. |
| 94 | 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 95 | Stainless steel lock for 10-12mm thick glass door, having knob inside with three keys, satin finish, complete all as specified and directed. |
| 96 | 200 mm long stainless steel handle, fancy type , fixed to toughened glass, complete all as specified and directed. |
| 97 | Providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over and inluding 15mm thick rendering in cement and sand mortar 1:4 including taking down existing plaster for multi storey building over cement plaster / stone surface,including necessaryscaffolding work,all as per manufacturer instructions complete all as specified and directed. |
| 98 | Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, for soil hard and dense complete all as specified and directed. |
| 99 | Providing cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in roof kerbs rounded or chamfered edges complete all as specified and directed. |
| 100 | Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : (i) Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original surface and nothing extra shall be paid on this account. (ii)Unit rate is inclusive of cutting chases in wall /foor/PCC for sunken box and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. |
| 101 | All as per serial item 100 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed |
| 102 | All as per serial item 100 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed |
| 103 | All as per serial item 100 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 104 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. |
| 105 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. |
| 106 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed. |
| 107 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 108 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. |
| 109 | Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 110 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 111 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , "C" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 112 | MCB, SPN , 240 volt,40 to 63Amps, 10 KA , "C" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 113 | LEDbulk head lights1x 9W/ 1x 10 W, 220V, including LED driver,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified.. |
| 114 | LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.. |
| 115 | LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.. |
| 116 | Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i)For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cableshall be considered as 1 running metre. (ii) PVC conduit and cutting chases will be measured and paid separtely (iii) colour code shall be Red for phase, Black for neutral and green for earth |
| 117 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete including dismantling of old earthing, all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii)PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m (iv)Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) unit rate including protection pipe and GI wire 4.00mm dia from top to earth plate upto 7.5 meter |
| 118 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed. |
| 119 | LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, includingbracket upto 1.5 mtr height as persuitable for fittingwith impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. |
| 120 | 20 to 25 mm dia, rigid non metallic PVC concealed conduit, "ISI marked", inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, fixed as in repair Complete all as specified and directed . |
| 121 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified and directed . |
| 122 | Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
