Military Engineer Services-MES has published Tender For Special Repairs To Roof Of Bldg No. T-03 And T-05 Of Bso Yard And Provision Of Rain Water Drainage At Mdc Under Ge (Central) Khadki.. Submission Date for this Tender is 13-11-2023. Shed Construction Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-11-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets as in roof coverings complete all as specified and as directed. |
| 2 | Dismantling timber framed work as in scantlings 40 sq.cmand over in section, in any position complete all as specified and as directed. |
| 3 | Description all as per Sl No. 2 above but in fillets, rails, posts, rafters, purlins etc., under 40 sq. cm in section complete all as specified and as directed. |
| 4 | Supply and fix second class soft wood timber framed and fixed clean sawn as in scantlings all as specified and as directed. |
| 5 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed. |
| 6 | Supply and fixpre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | Supply and fixpre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 8 | Supply and fix in repairs 0.63 mm thick plain galvanised, mild steel sheeting, as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping /coach screws complete all as specified and as directed. |
| 9 | Taking down chowkats or frames with shutters without taking off shutters from the frames area exc. 1.5 sqm but not exc. 4 sqm each all as specified and as directed. |
| 10 | Taking down chowkats or frames with shutters without taking of shutters from the frames area not exc. 1.5 sqm each all as specified and directed |
| 11 | Supply and fixfactory made shutter 35mm thick, plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and as directed. |
| 12 | Supply and fix plain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints complete all as specified and as directed. |
| 13 | Supply and fix 100 mm but hinges, medium weight, stainless steel complete all as specified and as directed. |
| 14 | Supply and fix aluminium handles 150 mm cast type anodised complete all as specified and as directed. |
| 15 | Supply and fix aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed. |
| 16 | Supply and fix stainless steel sliding door bolts, plate type, with stainless steelbright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed300mm long complete all as specified and as directed. |
| 17 | Supply and fix rolled mild steel as in flat iron of size25x3mm thick conforming to Fe-290, Gde E-165 as in hold fasts complete all as specified and as directed. |
| 18 | Supply and fix powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shuttersfor mosquito proofing with stainless steel wire cloth of 0.63 mm nominal dia and average width of aperature 1.4 mmand two Nos glass shutters with 4mm thick coloured sheet glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed. |
| 19 | Material and labour for hardcore of broken stonegauge n.exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 20 | Material and labour for 100 mm thick plain cement concrete, (1:4:8), type D2, using 40 mm graded stone aggregate, under floors, as in sub base of floor complete all as specified and as directed. |
| 21 | Material and labour for 40 mm thick plain cement concrete, (1:2:4), type B0, using 12.5 mm graded stone aggregate, under floors, as in sub base of floor complete all as specified and as directed. |
| 22 | Material and labour for preparation of new decorated plastered or unplastered surfaces of wall, and applying two coats of cement based paint of approved tint over a coat of primer complete all as specified and as directed. |
| 23 | Supply and fix rolled mild steel as in roof trusses(framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) confirming Fe-410- W(Gde- E-250) quality- A including distance pieces, cleats etc. complete all as secified and as directed. |
| 24 | Supply and fix rolled mild steel as in plates (plain or chequered) channels, square cut or notched (ordinary and counter shunk) forming holes, without any attachment confioming Fe-410- W(Gde- E-250) quality- A etc., complete all as secified and as directed. |
| 25 | Supply and fix forsteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 / I. S.4923- 1997 grade St.-240 etc. complete all as secified and directed. |
| 26 | Material and labour for preparation of new or previously untreated steel surfaces ofany description, over 10cm in width or girth, not otherwise described applying two coats of synthetic enamel paint of approved tintover one coat of red oxide primer complete all as specified and as directed. |
| 27 | Surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed. |
| 28 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. or for shaft, well, cesspits, manholes, pier holes etc. n exc 10sq m on plan and getting out in soft loose soil complete all as specified and as directed. |
| 29 | Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thickcomplete all specified and as directed. |
| 30 | Removing excavated soil to a distance n exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 31 | Material and labour plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and as directed. |
| 32 | Material and labour plain cement concrete (1:2:4), type B1, using 20 mm graded stone aggregate as in copings, benchings, bed plates, kerbs, water troughs, surface channels, copings for interlocking tiles and the like including necessary form work weathering, slightly rounded or chamfered angles and throating, complete all as directed. |
| 33 | Material and labour for sand/stone dust filling under floor or in foundation or for cushioning of interlocking paver blocks including watering and consolidation complete all as specificed and as directed. |
| 34 | Material and labour for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:4 complete all as specified and as directed. |
| 35 | Material and labour rendering 10 mm thick on brick walls or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete all as specificed and as directed. |
| 36 | Material and labour extra for forming fair finished drain or channel 37.5 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 37 | Supply and fix rolled mild steel as in framed work such as grills, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 38 | Material and labour for coloured machine pressed glossy finished precast concrete interlocking paver blocks ofany shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment laid over sand cushion complete all as specificed and as directed. NOTE :- Sand cushioning will be measured and paid separately. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
