Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-11-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-11-2023 |
| Sl. No. | Item Description |
| 1 | 15ID/SRW/BLD/(ASR)- 01/2023/24Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,icluding raking out joints , hacking for key, scrubbing down with wateretc. ; Complete all as specified and directed by Engineer-in-charge. |
| 2 | Material and Labour for rendering 10 mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement; Complete all as specified and directed by Engineer-in-charge. |
| 3 | Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth; Complete all as specified and directed by Engineer-in-charge. |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles; Complete all as specified and directed by Engineer-in-charge. |
| 5 | All as per Srl Item No 4.00 here-in-before, but except bricks.Note:- Serviceable bricks obtained from dismantling of brick work shall be reused. |
| 6 | Material and Labour forBrick work builtCM 1:6 subclass B brick straight or curved on plan exc 6m mean radius; Complete all as specified and directed by Engineer-in-charge. |
| 7 | Material and Labour for Brickwork with sub-class `B\" brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc; Complete all as specified and directed by Engineer-in-charge. |
| 8 | Supply and Fixing in repairs PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long; Complete all as specified and directed by Engineer-in-charge. |
| 9 | Supply and Fixingin repairsPVC connections 15mm size with PTMT nuts of length 450mm; Complete all as specified and directed by Engineer-in-charge. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable rubbish off the premises; Complete all as specified and directed by Engineer-in-charge. |
| 11 | Material and Labour for 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes; Complete all as specified and directed by Engineer-in-charge. |
| 12 | Material and Labour for 10mm thick Screed bed or beading layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc. ; Complete all as specified and directed by Engineer-in-charge. |
| 13 | Material and Labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match; Complete all as specified and directed by Engineer-in-charge. |
| 14 | Material and Labour for Glazed ceramic colour tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match; Complete all as specified and directed by Engineer-in-charge. |
| 15 | Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area ofeach tilesexceeding 0.42 sqm but n.exc.1.0 sqm as in floorset jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and directed by Engineer-in-charge. |
| 16 | Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area ofeach tilesexceeding 0.42 sqm but n.exc.1.0 sqm as in Dadoset jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:4 ; Complete all as specified and directed by Engineer-in-charge. |
| 17 | Material and Labour for 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6); Complete all as specified and directed by Engineer-in-charge. |
| 18 | Material and labour for precoated chequeredcement concrete tile of size 30cm x30cmx22mm thick over and including 15mm thick cement screed in CM 1:6set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of tiles; Complete all as specified and directed by Engineer-in-charge. |
| 19 | Taking up or down steel tubing and connections for 15mm bore of pipe ; Complete all as specified and directed by Engineer-in-charge. |
| 20 | Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc; Complete all as specified and directed by Engineer-in-charge. |
| 21 | Supply and Fixing for 15mm dia Tubes, \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type); Complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking up or down steel tubing and connections for 20mm bore of pipe; Complete all as specified and directed by Engineer-in-charge. |
| 23 | Supply and Fixing for 20 mm dia Tubes, \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type); Complete all as specified and directed by Engineer-in-charge. |
| 24 | Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc; Complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply and fixing rotational moulded polythelene water storage tanks tripple layer( white colour) of capacity 1000 litres with and including 20mm dia float valve with brass fittings hoisted, fixed in position and making connection including dismantling of existing unserviceable tank; Complete all as specified and directed by Engineer-in-charge. |
| 26 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each; Complete all as specified and directed by Engineer-in-charge. |
| 27 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each(as in doors) ; Complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply and fixingfactory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections.The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness.The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet.The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube .The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame .The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners.A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etcas per manufacturer\"s specification,; Complete all as specified and directed by Engineer-in-charge. |
| 29 | Materialand Labourfor Providing 30mm thick \" FACTORY MADEDOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottoMaterial and Labourock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel,5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-Charge, manufacturer\"s specification and drawing. |
| 30 | Supply and Fixing Wire netting of stainless steel wire 1.4mm dia and size of mesh in 12mm fixed with tinned tacks of stainless steel wire staples ; Complete all as specified and as directed by the Engineer-In-Charge. |
| 31 | Supply and Fixing 150 mmaluminum , anodised, barrel tower bolts of extruded section; Complete all as specified and directed by Engineer-in-charge. |
| 32 | Supply and Fixing butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame; Complete all as specified and directed by Engineer-in-charge. |
| 33 | Supply and Fixing 150 mmaluminum Handle Cast type; Complete all as specified and directed by Engineer-in-charge. |
| 34 | Supply and fixing PVC sheet 5mm thick, in backside of kitchen cabinets for support; Complete all as specified and directed by Engineer-in-charge. |
| 35 | Supply and fixing PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc; Complete all as specified and directed by Engineer-in-charge. |
| 36 | Supply and Fixing solid PVC shutter 18mm thick with one side prelam of any shade plain colour as in cup board, kitchen cabinet shutter etc. ; Complete all as specified and directed by Engineer-in-charge. |
| 37 | Supply and Fixing 40mm long box type steel hinges spring action type; Complete all as specified and directed by Engineer-in-charge. |
| 38 | Supply and Fixing 75-80mm long stainless steel handle; Complete all as specified and directed by Engineer-in-charge. |
| 39 | Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level); Complete all as specified and directed by Engineer-in-charge. |
| 40 | Supply and fixing, in 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials; Complete all as specified and directed by Engineer-in-charge. |
| 41 | Supply and Fixingin repairs110 mmborePVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall or floor; Complete all as specified and directed by Engineer-in-charge. |
| 42 | Supply and Fixing PVC (SWR) bend 110 mm size; Complete all as specified and directed by Engineer-in-charge. |
| 43 | Supply and Fixing 110 mm bore PVC (SWR) single Tee; Complete all as specified and directed by Engineer-in-charge. |
| 44 | Material and Labour 75 mm PVC (SWR) floor trap, plain withgrating including jointingwithsolvent cement; Complete all as specified and directed by Engineer-in-charge. |
| 45 | Supply and Fixing 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; Complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply and fixing aluminium chowkat powder coated of size as directedaccording to site requirementfor door and windows; Complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply and fixing aluminiumpowder coated glazedshutter(for doors) with style and top rail of section 80 x 44mm,16 Gauge thick and bottom rails of section 112 x 44mm of14 Gauge thick, middle rail 150 x 44mm of 16 guage thickfixed on floor spring, both side opeining without sash bars but including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubberbeading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm Note :-Floor spring shall be measured and paid separately; Complete all as specified and directed by Engineer-in-charge. |
| 48 | Supply and Fixing Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each; Complete all as specified and as directed by the Engineer-In-Charge. |
| 49 | Supply and fixing 5.5 mm thick sheet glass ordinary quality in squaresexc 0.50 Sqm in each panes including rubber packing and aluminium beading with and including solar control film 25 Micron reflective type stuck to glass panes as per instruction of manufactures; Complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply and fixing aluminium door closer hydraulically regulated designation No 3universal type suitable for door shutter of 861 to 1000 mm in width and of weight between61 to 80 kg and fixed ; Complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and fixing double action floor spring hydraulically regulated made up of 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of steel; Complete all as specified and directed by Engineer-in-charge. |
| 52 | Dismantling boarding,any description,fixed inanypositionwith nails; Complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply and fixing Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing; Complete all as specified and directed by Engineer-in-charge. |
| 54 | Material and Labour for preparation of Old/New plastered surface and applying two coats of Plastic Emulsion Paint Over Priming Of Surface with chalk whitening; Complete all as specified and directed by Engineer-in-charge. |
| 55 | Material and Labour for Removing of nails, making good holes, cracks, etc andapplying 2 mm thick wall care puty on walls including finished the surface even and smooth; Complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply and Fixing for 15 mm Bib taps, cast copper alloy fancy type chromium plated with flange screwed down screwed for iron pipe of 15mm bore and fixed in repairs. ; Complete all as specified and directed by Engineer-in-charge. |
| 57 | Supply and Fixing in repairs for 15mm dia Stop valves, , high pressure, with crutch or butterfly handle, chromium plated, fancy type, with flange screwed both ends for iron pipe or for unions; Complete all as specified and directed by Engineer-in-charge. |
| 58 | Supply and Fixing in repairs Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges; Complete all as specified and directed by Engineer-in-charge. |
| 59 | Supply and Fixing in repairs glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with plated bracket guard and railing 50cm long.; Complete all as specified and directed by Engineer-in-charge. |
| 60 | Supply and fixing in repairsglass corner shelf 30 cmradius made of 5.5mm thick sheet glass with CP guard railing fixed to wallswith bracket; Complete all as specified and directed by Engineer-in-charge. |
| 61 | Supply and Fixing in repairs for Vitreous China wash basin, white, flat back, size 500 X 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete as in repairs; Complete all as specified and directed by Engineer-in-charge. |
| 62 | Supply and Fixing in repairs Toilet paper holder ofchromium plated fixed to walls with cromium plated brass screws ; Complete all as specified and directed by Engineer-in-charge. |
| 63 | Supply and Fixing in repairs soap dish, cromium plated, approximate size 160x160x90 mm; Complete all as specified and directed by Engineer-in-charge. |
| 64 | Supply and Fixing in repairs Wall Mixture, Cromium plated, ; Complete all as specified and directed by Engineer-in-charge. |
| 65 | Supply and Fixing in repairs Basin Mixture, Cromium plated,; Complete all as specified and directed by Engineer-in-charge. |
| 66 | Supply and Fixing in repairs600 mm x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick Ac Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete as in repairs; Complete all as specified and directed by Engineer-in-charge. |
| 67 | Supply and Fixing in repairsfor brass chromium plated Hand shower with 1.5 mtr tube ; Complete all as specified and directed by Engineer-in-charge. |
| 68 | Supply and Fixing GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with hangers 6mm dia GI (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long; Complete all as specified and directed by Engineer-in-charge. |
| 69 | Supply and Fixing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish including sealing the joints wit POP and applying two coats of Oil bound distemper over a coat of primer; Complete all as specified and directed by Engineer-in-charge.Note(Frame work for ceiling shall be measured and paid separately) |
| 70 | Supply and fixing stainless steel rolling drawer pull type suitable for kitchen/Room cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm; Complete all as specified and as directed by the Engineer-In-Charge. Note:- Net area of front finished surface will be measured. |
| 71 | Supply and FixingBrass mortice lock, 4 levers, verticle type, size 100 mm,; Complete all as specified and as directed by the Engineer-In-Charge. |
| 72 | Supply and Fixing 450mm longBrass handles, cast type; Complete all as specified and as directed by the Engineer-In-Charge. |
| 73 | Material and Labour for frosted to toughned glass of any thickness ; Complete all as specified and as directed by the Engineer-In-Charge. |
| 74 | Material and Labour for Finishing walls with Acrylic Smooth exterior paint of required shade :(Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kilogram/10 sqm) including preparation of old surfaces; Complete all as specified and as directed by the Engineer-In-Charge. |
| 75 | Material and Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required; Complete all as specified and as directed by the Engineer-In-Charge. |
| 76 | Supply and Fixing in repairs vitreous china wash down water closetpedestral pattern pan (coupled closet) white including vitreous china flushing cystern, flush pipe, seat cover cystern cover; Complete all as specified and directed by Engineer-in-charge. |
| 77 | Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in 50 mm thick plinths protection and as in path and floor; Complete all as specified and directed by Engineer-in-charge. |
| 78 | Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse; Complete all as specified and directed by Engineer-in-charge. |
| 79 | Demoliton of mud in roof any thickness including mud plasteringand removing to distance exc 250m but n exc 500m; Complete all as specified and directed by Engineer-in-charge. |
| 80 | Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement; Complete all as specified and directed by Engineer-in-charge. |
| 81 | All as per Srl Item No. 80 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused. |
| 82 | Material and Labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof paddingmixed with WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement; Complete all as specified and directed by Engineer-in-charge .Note : WPC shall be measured and paid separately under relevant item of Sch \"A\"). |
| 83 | Material and Labour for 15mm thick plaster in CM (1:3) on RCC roof surfaces as in vertical surfacesmixed with water proofing liquid compound finished the surface even and smooth without using extra cement; Complete all as specified and directed by Engineer-in-charge. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately. |
| 84 | Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 [email protected] Kg/Sqm including cleaning surfaces etc; Complete all as specified and directed by Engineer-in-charge. |
| 85 | Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces ; Complete all as specified and directed by Engineer-in-charge. |
| 86 | Supply only water proofing compound liquid type (ISI Marked); Complete all as specified and directed by Engineer-in-charge. |
| 87 | Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas; Complete all as specified and directed by Engineer-in-charge. |
| 88 | Material & Labour for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work; Complete all as specified and directed by Engineer-in-charge. |
| 89 | Material & Labour for Rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished fair and even without using extra cement; Complete all as specified and directed by Engineer-in-charge. (WPC measured saperatly) |
| 90 | Material and Labour for Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, ; Complete all as specified and directed by Engineer-in-charge.Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm. |
| 91 | Material and Labour for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors; Complete all as specified and directed by Engineer-in-charge. |
| 92 | Supply and Fixing Point wiring complete with 1.5 Sq mm (nominal area)FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI markedof size 25 mm dia and 1.5 mm wall thickness and conduitfittings including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wireto common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoated rate.) (a)Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push. |
| 93 | Supply and Fixing Point wiring complete with 1.5 Sq mm (nominal area)FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI markedof size 25 mm dia and 1.5 mm wall thickness and conduitfittings including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wireto common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoated rate.) (a) One socket outet point 5 amps on the same board. |
| 94 | Supply and Fixing Point wiring complete with 1.5 Sq mm (nominal area)FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI markedof size 25 mm dia and 1.5 mm wall thickness and conduitfittings including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wireto common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoated rate.) (a) One socket outet point 5 amps on the independent board. |
| 95 | All asitemhere in before but with 2.5 sq mm wire and earth wire of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet. |
| 96 | Supply and Fixing MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plateincluding taking down old MCCB all as specified and directedcomplete all as specified.. (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) MakeLegrand/Siemens/Schneider |
| 97 | Supply and Fixing bell Multi music type elelctric 230V ACsingle pole etc complete all as specified and directedby Engineer-in-Charge |
| 98 | Supply and Fixing Modular Switch, 6 Amp, one way, one Module.etc complete all as specified and directedby Engineer-in-Charge |
| 99 | Supply and Fixing Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directedby Engineer-in-Charge |
| 100 | Supply and Fixing Modular Switch, 16 Amp, onw way, one Module. etc complete all as specified and directedby Engineer-in-Charge |
| 101 | Supply and Fixing Modular Socket Outlet6 Amp,2/3 pin, combined two module etc complete all as specified and directedby Engineer-in-Charge. |
| 102 | Supply and Fixing Modular Socket Outlet6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directedby Engineer-in-Charge |
| 103 | Supply and Fixing Modular Bell push, 6 Amp, one module etc complete all as specified and directedby Engineer-in-Charge |
| 104 | Supply and Fixing ModularFan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directedby Engineer-in-Charge |
| 105 | Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directedby Engineer-in-Charge |
| 106 | Supply & fixing ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directedby Engineer-in-Charge |
| 107 | Supply and Fixing in replacement double doorSheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L&T |
| 108 | Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, \"C\" series and making connections with suitable size of copper lugs etc complete all as specified and directedby Engineer-in-Charge |
| 109 | Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, \"C\" series and making connections with suitable size of copper lugs etc complete all as specified and directedby Engineer-in-Charge |
| 110 | Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, \"C\" series and making connections with suitable size of copper lugs etc complete all as specified and directedby Engineer-in-Charge |
| 111 | Supply and fixingDecorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use packLED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cableof size 0.5 Sqmm withcompletewith all accessories etc complete all as specified and directedby Engineer-in-Charge |
| 112 | Supply and Fixing Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use packLED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cableof size 0.5 Sqmm withetc complete all as specified and directed by Engineer-in-Charge |
| 113 | Supply & fixing in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directedby Engineer-in-Charge |
| 114 | Supply and Fixing sub main wiring with two single core PVCinsulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn throughand including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directedby Engineer-in-Charge Note :1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit |
| 115 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts& washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precostRCC(1:2:4)mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC,both way, lifting arrangement complete including all necessaryearth work etc complete all as specified and directedby Engineer-in-Charge |
| 116 | Material and Labour for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directedby the Engineer-in-Charge of following Sizes:-(a) LT cable 70 Sqmm, 3.5 core. |
| 117 | Material and Labour for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directedby the Engineer-in-Charge of following Sizes:-(a) LT cable 50 Sqmm 3.5 core |
| 118 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge |
| 119 | Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge |
| 120 | Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge |
| 121 | Supply &laying HDPE pipe 65 mm bore light weight with 0.95 gm/cm2 IS: 4984(1995) PN 2.5 for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge |
| 122 | Supply and fixingfacory madeLT Feeder piller box430 V,3 Phase600 A Aluminium bus bar mounted on 430 V Porcelinepost insulator/epoxy insulator including one coat of primer and two coat of enamel paint testing ,Commisssioning complete with grouting in PPC 1:3:6 type C2 including one incoming MCCB 200 Amp four polewith Breaking Cap 25 KA-01 No andoutgoing suitable for 3 core XLPE armoured aluminium conductor cable of suitable sizeboth sides openable (front and back) with locking arrangement , including cable trench duly painted with two coats of synthetic enamel paint over a coat of red oxide primer both internally and externally connecting with existing cable with lugs including internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. as specified byEngr-in Charge. |
| 123 | Supply ,Installing, commissioning and testingin replacement LT panel board, factory made, out door, cubical type , vermin proof, dust proof, cubical type, vermin proof , dust proof, water proof made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and angle iron frame of size 50x50x5mm inside depth not less than 50 cm and size suitable to accommodate the following accessories, with insulated alluminium busbar 400amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , including cable trench duly painted with two coats of synthetic enamel paint over a coat of red oxide primer both internally and externally connecting with existing cable with lugs including internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 250 Amp four polewith Breaking Cap 25 KA-01 No(Incoming)(b) MCCB (b)TPN 200 AmpsTPN with breaking cap 10KA- 04 Nos (For Out Going)(c) MCCB (c)100 Amps (TP) with breaking capacity 25 KA-02 Nos (For Out Going)(d) Volt Meter (digital Type (0 T0 600 Volts)-01 No(e) Ammeter (digital type) with Cts 0-300Amps)-01 No(f) Phase indication lamps LED type with holder-01 Set(Set of Three)Notes:- 1. The PanelShould be approved by CPRI. 2.The rates Quoted shall include for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board. |
| 124 | Supply and fixingDecorative bed light fitted in wallLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use packLED bulb 7 Watt with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cableof size 0.5 Sqmm withcompletewith all accessories etc complete all as specified and directedby Engineer-in-Charge |
| 125 | Job No- ASR/M/10/2023-24Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil; Complete all as specified and directed by Engineer-in-charge. |
| 126 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm; Complete all as specified and directed by Engineer-in-charge. |
| 127 | Removing excavated material n.exc 50 m and depositing where; Complete all as specified and directed by Engineer-in-charge. |
| 128 | Material and Labour for Cement concrete type D2, 1:4:8 (40 mm graded aggregate)in foundations, filling and mass concrete; Complete all as specified and directed by Engineer-in-charge. |
| 129 | Material and Labour for brick work with sub class \"B\" bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge. |
| 130 | Material and Labour forPCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in coping; Complete all as specified and directed by Engineer-in-charge. |
| 131 | Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement); Complete all as specified and directed by Engineer-in-charge. |
| 132 | Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement); Complete all as specified and directed by Engineer-in-charge. |
| 133 | Material and labour for preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work; Complete all as specified and directed by Engineer-in-charge. |
| 134 | Material and Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment; Complete all as specified and directed by Engineer-in-charge. |
| 135 | Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface; Complete all as specified and directed by Engineer-in-charge. |
| 136 | Material and Labour for 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate asin sub base of floor; Complete all as specified and directed by Engineer-in-charge. |
| 137 | Material and Labour for Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smoothusing extra cement; Complete all as specified and directed by Engineer-in-charge. |
| 138 | Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes; Complete all as specified and directed by Engineer-in-charge. |
| 139 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator of any size (as required) Fixed type made offrame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimensioncomprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 140 | Supply and Fixing 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required; Complete all as specified and directed by Engineer-in-charge. |
| 141 | Material & Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required; Complete all as specified and directed by Engineer-in-charge. |
| 142 | Supply and Fixing Double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 143 | Supply and FixingBrass mortice lock, 2 levers, verticle type, size 100 mm,; Complete all as specified and directed by Engineer-in-charge. |
| 144 | Supply and Fixing 450mm longBrass handles, cast type; Complete all as specified and directed by Engineer-in-charge. |
| 145 | Material and Labour for frosted to toughned glass of any thickness; Complete all as specified and directed by Engineer-in-charge. |
| 146 | Material and Labour for Embossed any type of emblem of size 0.45x0.45M on frosted glass door; Complete all as specified and directed by Engineer-in-charge. |
| 147 | Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240; Complete all as specified and directed by Engineer-in-charge. |
| 148 | Material and Labour for apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 149 | Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws; Complete all as specified and directed by Engineer-in-charge. |
| 150 | Material and Labour for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately; Complete all as specified and directed by Engineer-in-charge. |
| 151 | Material and Labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre; Complete all as specified and directed by Engineer-in-charge. |
| 152 | Material and labour for preparation of newly surface of Ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work; Complete all as specified and directed by Engineer-in-charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
