}

Tender For C/O Bop Building Sh Mahila Barrack, 01 No Corner Bunker, 02 No Men Bunker And Deep Tubewell With Submersible Pump At Bop Makwal Of 07 Bn Bsf (Sh Ei And Electrical Development Work), Jammu-Jammu And Kashmir

Border Security Force-BSF has published Tender For C/O Bop Building Sh Mahila Barrack, 01 No Corner Bunker, 02 No Men Bunker And Deep Tubewell With Submersible Pump At Bop Makwal Of 07 Bn Bsf (Sh Ei And Electrical Development Work). Submission Date for this Tender is 21-10-2023. Bunker Tenders in Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

40207362
Tender For C/O Bop Building Sh Mahila Barrack, 01 No Corner Bunker, 02 No Men Bunker And Deep Tubewell With Submersible Pump At Bop Makwal Of 07 Bn Bsf (Sh Ei And Electrical Development Work)
Open Tender
Indian
Jammu And Kashmir
Jammu
21-10-2023

Tender Details

C/O Bop Building Sh Mahila Barrack, 01 No Corner Bunker, 02 No Men Bunker And Deep Tubewell With Submersible Pump At Bop Makwal Of 07 Bn Bsf (Sh Ei And Electrical Development Work)

Key Value

Document Fees
Refer document
EMD
INR 20386.0 /-
Tender Value
INR 10.19 Lakhs /-

BOQ Items

Name of Work: C/O BOP Building (SH: Mahila Barrack, 01 No corner bunker, 02 Nomen bunker, strom water drain, supply and installaiton of RO plants including base underground sump and water supply distribution lines, main pathway and deep tubewell with pathway connecting pathway and deep tubewell with submersible pump) at BOP Makwal Fwd ofBN BSF (Now 07 BN) under SHQ BSF Jammu (SH: EI and Electrical Development Work)
Sl. No. Item Description
1Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.i) Group B
2Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
3Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
4Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. ii) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
5Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. iv) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire
6Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recesincluding cutting the wall and making good the same in case of recessed conduit as required.i) 20 mm
7Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. i) TV antenna socket outlet
8Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
9Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. i) 2 Pair
10Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6modular socket outlet and 5/6 A modular switch, connections etc. as required.
11Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
12Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required (Make- Anchor Modular or similar make of the manufacturer having their service centre in Jammu.)
13Providing and installaion of 24 W LED 6500K Decorative ultra slimaluminium LED lighting fixture with high lumen output, environmental friendlyenergy efficient ready to use packcomplete with all accessories and tube/lamp etc directly on ceiling/ wall, including connections earthing etc.as required.. (Make like: Havells HIGH WATTAGE (ALUMINIUM BATTENS) Code- LHEXACP7IN1S024 or similar make of the manufacturer having their service centre in Jammu)
14Providing and installaion of 10 W LED tube Light 2 FT, 3000KLED lighting fixture with extruded polycarbonate, environmental friendlyenergy efficient ready to use pack directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required( make like: Havells -LHEXACP5IN1W010 E-Lite LED Pride Plus Neo or similar make of the manufacturer having their service centre in Jammu)
15Supplying and fixing modular type brass batten/ angle holder including connection etc. as required(make like :Havells AURA - Bidirectional lamp holder or similar make of the manufacturer having their service centre in Jammu.)
16Providing of 10 watt, 6500K boll type LED Bulb (Make like:Havells LED Adore 10W B22 Cdl cat no. LHLDEUEEML8R010 or similar make of the manufacturer having their service centre in Jammu)
17Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
18Supplying and installation of1 phase Heavy duty exhaust fan of 300 mm sweep, min 1400 rpm, air delivery min 1950 Cubic meter /hour, double ball bearing Rough proof body and blade,in the existing opening, including making good the damage, connection, testing, commissioning i/c nut bolt supporting clamp, connecting wire etc as required (Make Havells -TURBOFORCE SPor similar make of the manufacturer having their service centre in Jammu)
19Supplying and fixing louvers, Shutters complete with frame for exhaust fan of 300 mm sweep etc. as required.
20Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(make like :Havells or similar make of the manufacturer having their service centre in Jammu.)
21Supplying, Installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated ceiling fan with brush less direct current (BLDC) motor, class of insulation B, 3 Nos Blades, 30 cm long down rod, 2 nos canopies, shackle kit safety rope copper winding, power factor not less than 0.9,service value (CM/M/W), min 6.00 air delivery minimum 210 Cum/min, 350 RPM (Tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for spred control and all remaning accessories including safety pin, nut bolts, washers temperature rise = 75 degree C (Max) insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz single phase AC supply, earthing etc complete as required.
22Supplying, installation, testing & commissioning of Wall mounted Fan 400 MMsuitable for single phase AC, complete with all acessries connection etc as required. (Make-Crompton Model High Speedor similar make of the manufacturer having their service centre in Jammu)
23Supplying, installation, testing and commissioning of 30 Watt LED Flood Light, including fitting on wall with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (Make like: JETA QUANTO PLUS Code- JETAQUANTOPLUSFLP30WLED757SYMLENS or similar make of the manufacturer having their service centre in Jammu)
24Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) i) 6 way, Double door
25Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) ii) 12 way, Double door
26Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i)Single pole (make like :Havells or similar make of the manufacturer having their service centre in Jammu.)
27Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ii) Double pole 32 Amp (make like :Havells or similar make of the manufacturer having their service centre in Jammu.)
28Earthing with GI earth 50 mm X 2000 mm including accessories with ground enrichment compound (AIO4SiOHO), crstalline conductive mixture conforming IS 3043:1987as required
29Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
30Supplying and Laying of one number XLPEinsulated and PVC sheathed power cable of 1.1 KV grade of4 x 25 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1988 direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Make- Polycab or Other equivalent Havells, L&T)
31Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. i) Upto 35 sq. mm
32Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPEinsulated and PVC sheathedaluminum conductor cable of 1.1 KV grade as required. i) 4 X 25 sq. mm (28mm)
33Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required i) 50 mm dia
34Supplying and fixing Bus-Bar chamber with 32 Amps, 415 volts,4 way 4 nos.copper bus bars, Complete with connections, earthing the body etc. as required. AnchorMake Item Code 98377 or other equivalent Havells, Crompton, Phillips, Legrand.
35Supplying, installation, testing and commissioning of 25 Ltr Storage type 5 Star rating, 2 KWGyser suitable for 230 V AC single phase supply and making connection with heavy duty connection pipe etc. as required . (Make Crompton, Solarium Cube Plus, ASWH-3225 or similar make of the manufacturer having their service centre in Jammu)
36SITC of cubical canopy type out door hut type Junction boxfrom 3 mm thick CRCA sheet having size 600 mm (L) x 350mm (D) x 600mm (H) fabricated with CRCA sheet 3 mm thick mounted on 04 Nos 50 mm x 50 mm x 6 mm thick angle iron frame, erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling,hinged front & back doors with locking arrangements,,cable tray with provision of fixing of glands at hte bottom,antirust design, air ventilation grooves, water drop proofing arrangement ,insluators,earthing studs,nuts bolts etc.as required including connections,painting with primer & finish paint with synthetic enamel paintwith04 nos aluminium bus bar strip suitable for 125 A,415 V capacity with suitable insulated support for AL bus bar complete as required.
37Supplyingof submersible motor pump set 3 HP, 8 stage suitable for 150 mm dia bore well, outlet size 50 mm, 415 volt , 50 Hz and outlet dia50 mm and head range 10 mtr to 82 mtr and discharge 290 to 60 LPM minimum. Crompton make cat no 6W8W3DU OR similer make like lubi/KSB/Kriloskar as approved by engg in charge.
38Supplying of PVC Insulated and PVC Sheathed3 x 2.5 sqmm Flat Submersible Cable with Copper Conductor for Submersible Pump Motors with voltage Grade upto 1100 Volts as per IS694/1990 (Polycab/ Havells / L&T/ RR Kable/Finolex)
39Supplying of1 phase MU-2P Single Phase DOL Starter [HSN Code 8536] suitable for 3 HP motor pump setand motor havingSingle Phase, 230 volts 50 HZ , relay range 13-22 A L&T make model No CS90319KODO or any similar make as approved by engg incharge
40Supplying of Stainless Steel wire rope: 6 mm dia, SS wire strand core, 316 Grade Twisted Rope typefor lifting load having Breaking Resistance 2590 Kgs, Maximum Impact Force 18.76 kN as per IS: 3459/2004
41Supplying of Pump Guard set 2" size with 02 nos MS powder coated Flange and02 nos SS Rod with nut and cotter pin for hanging of submerssibe motor pump set in bore well ( Prince, supreme, Ashirvad, Finolex, Kissan, Aistral, Duke make)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail