Public Works Department-PWD has published Tender For Construction Of Anganwadi Centre At Hunderi. Submission Date for this Tender is 16-10-2023. Building Work Tenders in nubra Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Dumping of Stone Including Cost of stone |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column |
| 5 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 6 | column pillars piers abutment. |
| 7 | suspended floor roofs landings |
| 8 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo- Mechanically treated bars.) |
| 11 | Providing and layingstabilized mud block wall having two leaves interlocked with ties at 900mm Horizontally and 450 mm Vertically, leaving air cavity of 3" between two wall leaves. |
| 12 | CEMENT PLASTER (IN FINE SAND) 15mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 13 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 14 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 15 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 17 | Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Workwith plank size not Iess than 1200 mm X 190 mm (with tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer "T" profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately, wherever required |
| 18 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Dark shade using ordinary cement. |
| 19 | Providing wood work in frames of doors, (Double Glazed) windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters(Double Glazed) for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm Second Class Kail Wood |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood |
| 22 | 5 mm thick glass pane (weighing not less than 12 kg/sqm) (Double Glazed). |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 24 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : |
| 25 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete. |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 27 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineerincharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. (For Bathroom & Kitchen- Including Both Hot and Cold Supply from tank and Solar Water Heater Respectively) PN-16 pipe , 25mm OD(SDR-7.4 |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meterspacing PN-16 pipe , 32mm OD(SDR-7.4 |
| 30 | Providing and fixing PPR Unions PPR Union 32mm |
| 31 | PPR Union 25mm |
| 32 | Providing and fixing water closet squatting pan (indian type W.C. pan) with 10 LITRE PVC CISTERN cistern with fittings,C.I./M.S. brackets 40 mm diameter flush bend with fittings and clamps,overflow arrangement with speicals and mosquito proof coupling of aproved municipal design complete including painting of fittings and brackets,cutting and making good the wall and floors wherevere required |
| 33 | Providing and fixing wash basin with CI MS bracket, 15mm CP brass pillar taps , 32mm CP brass waste of standard pattern incl. paintings of fittings and brackets cutting and making good the walls wherever req. White viterous china wash basin size 600x480mm with single 15mm CP brass pillar taps |
| 34 | Kitchen sink with drain board Size 510 x 1040 bowl depth 178 mm |
| 35 | Providing and fixing mirrior of superior glass (of approved quality) and of req. shape and size with plastic moduleframe of approved make and shade with 6mm thick hardboard backing. Rectangular shape 1500x450 mm |
| 36 | Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. |
| 37 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms |
| 38 | Providing and fixing toilet paper holder CP brass |
| 39 | Providing and fixing PVC soil waste and vent pipes. 100mm dia |
| 40 | Providing and fixing PVC soil waste and vent pipes.75mm dia |
| 41 | Providing and fixing plain bend of req degree 100mm dia |
| 42 | Providing and fixing plain bend of req degree 75mm dia |
| 43 | Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC100mm dia |
| 44 | Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC 75mm dia |
| 45 | Providing and fixing PVC collar of req dia complete job 100mm dia |
| 46 | Providing and fixing PVC collar of req dia complete job75mm dia |
| 47 | Providing and fixing PVC waste pipe for sink or wash basin incl. PVC waste fittings complete Flexible pipe 32mm dia |
| 48 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 49 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 50 | Providing and fixing gyeser of req. capacity incl. fixing with all fixture complete job.25ltr |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tan |
| 52 | Gtae Valve- 32mm |
| 53 | Tank Nipple |
| 54 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone |
| 55 | Wooden Shingstak - plain design |
| 56 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 58 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 59 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 61 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 62 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. A ) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 63 | b )2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 64 | c ) 2 x10sq. mm + 1X 6 sq. mm earth wire |
| 65 | d)4X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 66 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludin modular plate etc. as required.a)5/6 A switch |
| 67 | 3 pin 5/6 A socket outlet |
| 68 | Telephone socket outlet |
| 69 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction boxwooden block including connections etc. as required |
| 70 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No.s 3 pin 5/6 A modular socket outlet and 2 No.s5/6 A modular switch, connections etc. as required. |
| 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 73 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)a ) 6 way (4 + 18), Double door |
| 74 | b ) 8 way (4 + 24), Double door |
| 75 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A )Single pole 6 /16 amp |
| 76 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.a ) 25mm |
| 77 | Supply, installation , testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length , with 3mm thick the electrode should be hot dip galvinised . The GI Electrode shall be pre filled with cristaline Conductive Material ( CCM ) . The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco - friendly GI Electrode Earthing should be eco - friendly GI Electorde Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. |
| 78 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at |
| 79 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 80 | 100 A,30KA,FPMCCB |
| 81 | Change over switch 100 Amp MCCB Type FP |
| 82 | Fabrication, supplying , installation testing and commissioning of following pannel made out of 2mm thick M.S sheet , floor mounted , vermin & dust proof, indoors , duly painted with provsion for fixing of1 nos incomer MCCB, , MCCB type change over switch - 1 No including supply and fixing 2 set of Aluminium bus bar and strip for housing MCB,s 24 Nos , MF Digital Meter and other allied accessories as required ( Make as per annexure) |
| 83 | Supplying and fixing of following rating 240 /415 Volt" C" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection , testing and commissioning.( Above to32 Amp)a ) SPN 63 Amp |
| 84 | TPN 63 Amp |
| 85 | Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall.Wipro LR02-132-XXX-57-G2 or equivalent approved make |
| 86 | Supplying & fixing following luminaries as requiredLL20-111-XXX-65NE3wipro 10 watt LED tube light fitting. equivalent make and model Philips/Crompton Greaves. |
| 87 | 20 watt LED tube light fitting. LL20-221-XXX-65NE3 of wipro or equivalent make and model Philips/Crompton Greaves. |
| 88 | Supplying, installation testing and commissioning of LED 2"x2" recess mounted fixture that deliversatleast3000 lumens and wattage not more than 36 watt. The luminaries shall have a CRC a power coated body and a high efficiency diffuser. WIPRO CRCO10 RO 38HP57GL OR equivalent approved make. |
| 89 | Supplying and fixing of Angle / Baten Holder with 9 watt LED Lamp polycarbonate including making complete connections etc. as required. ( Make as per annexure enclosed.) |
| 90 | Supplying and fixing of following electrical items suitable for operating on 240 /230 volts AC, 50 HZ supply , including connection etc. as required.Exhaust fan 300 mm size ( Heavy duty) CG transair or equivalent approved make |
| 91 | 250 mm Shutter Type |
| 92 | fmishing and reinforcement. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
