Military Engineer Services-MES has published Tender For Special Repairs To Existing Temprorary Bldg By Replacing Ac Sheet With Galvanised Sheets And False Ceiling And Certain B/R Minor Works At Afs Begumpet Under Ge (Af) Hakimpet. Submission Date for this Tender is 28-10-2023. False Celing Tenders in Hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-10-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed. |
| 2 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws as specified. |
| 3 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 |
| 4 | S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and runningrails and guides for sliding doors fixed with angle cleats or other connecting plates (Fe 410-W Gde-E-250 quality-A). |
| 5 | M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete. |
| 6 | S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both direction including S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inCM 1:4. |
| 8 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement |
| 9 | Material and labour PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings. |
| 10 | M&L for Preparing new plastered surfaces of walls and applyingthree coats of cement basepaint complete all as specified and directed. |
| 11 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts |
| 12 | Dismantling timber scantling 40 Sqcm and over in section incl trusses inany position as in unframed work, complete all as specified and directed. |
| 13 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote. |
| 14 | Surface excavationnot exceeding 30 cm deep and averaging 15 cm deep & getting out in all type soil complete all as specified.any type of soil |
| 15 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil. |
| 16 | M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete. |
| 17 | M&L for brick work with fly ashbricks, straight or curved on plan exc 6m mean radius built in CM1:6 |
| 18 | M&L for Formwork to sides of rough finished surfaces of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified. |
| 19 | M&L for use and waste Formwork tosides of pillars, post, stuts, coloumn and stanchirns rough finished surfaces of concrete square, rectangular or polygonal complete all as specified. |
| 20 | M&L for use and wase Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface. |
| 21 | M&L for use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified |
| 22 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified. |
| 23 | M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified. |
| 24 | M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete |
| 25 | M & L for RCC Nominal Mix, Type B1 1:2:4 (using 20mm graded stone aggregate) for Beams catileveres bressummers, lintels over 1.5m span and similar work complete all as specified and directed |
| 26 | M & L for Damp proof course 40mm thick in cement concrete 1:2:4 type (B-0) to horizontal or vertical surfaces including necessary formwork |
| 27 | Supply only integral water proofing compound |
| 28 | M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified |
| 29 | M&L for RCC Nominal Mix, Type B1 1:2:4 (using 12.5 mm grade stone aggregate)for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 30 | S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105X60mm |
| 31 | M&L forPCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling in pressed steel door frames complete or hold fast block all as specified and directed. |
| 32 | S&F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 33 | S&F 300mmlong Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 34 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section. |
| 35 | S & F 150mm long extruded aluminium alloy handles fabricated type anodised. |
| 36 | S & F floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long |
| 37 | M & L for preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. |
| 38 | S & F for Sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane |
| 39 | M & L forbroken stone or boulders hardcore of gauge exc 63 mm but n.exc. 150 mm, deposited, spread and levelled in layers n.exc. 75mm thick, watered and rolled/rammed to a true surface |
| 40 | M&L for 75mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor. |
| 41 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in floor. |
| 42 | M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 |
| 43 | M&L for Non skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 44 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4for backing of Dado/Skirting. |
| 45 | M&L for glazed ceramic Coloured tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match. |
| 46 | M&L for rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement etc complete all as specified and directed. |
| 47 | M&L for rendering 15 mm thick cement plaster on fairbrick work or concrete surfaces in CM 1:6 finished to even and smooth sitfaces in without using extra cement incl. |
| 48 | M&L for rendering 5 mm thick ceiling cement plaster on fairbrick work or concrete surfaces in CM 1:4 finished to even and smooth sitfaces in without using extra cement incl. |
| 49 | M&L for preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer all as specified. |
| 50 | M&L for for preparation of new plastered/ undecorated surface of wall and applying three coats of white wash complete all as specified and directed. |
| 51 | M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 52 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm gradedstone aggregate) in , plinth protection , including finishing the surface even and smooth without using extra cement. |
| 53 | Returning filling in excavated material any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all directed. |
| 54 | Removing surplus excavatet any type of soil to a distance n exc 50 m and deposting where directed at a level n exc 1.5 m above the starting point complete all as directed. |
| 55 | M&L painting, preparing new steel surface, priming with Red oxide, two coat of synthetic enamel paint complete all as directed. |
| 56 | M & L for rendering 10mm thick with CM (1:3) on concrete surfaces (on top of roof slab) mixed with water proofing compound as per manufacturer"s instructions surfaces finished even and smooth without using extra cement (WPC shall be measured and paid separately) |
| 57 | Supply only Liquid water proofing compound |
| 58 | M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighingnot less than160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required all as specified and directed. |
| 59 | S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity (cylindrical vertical with closed top) three layer hoissted and fixed in position all as specified |
| 60 | S&F 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 61 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 62 | S&F 110 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 63 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded. |
| 64 | Ditto Item No 45 but without glazing bars |
| 65 | M&L Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed. |
| 66 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 67 | S & F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1all as in repairsspecified and directed. |
| 68 | S&F 304 grade stainless Steel sink with drainage board made of stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long. |
| 69 | S&F 15mm bore chromimum plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 70 | M&L for 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade |
| 71 | M & L forRounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 72 | S&F CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings inwall/ceiling complete all as specified. |
| 73 | Dismantling of wall and ceiling boards (fibre, pulp, wooden, insulation etc.,)or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-charge. |
| 74 | M&L Elegant tile made of perforated cement fibre composite 595x595/295x1195/595x1195x5 mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz.The tiles are anti-sag and installed on T 25 grid system of 0.6 mm thick main "T" length minimum 3000 mm, web minimum 35 mm to be placed at 600 mm web minimum center to center and secondary cross "T" of lenght 600 mm web minimum 35 inter locked, 4 mm wire support for min T to be taken at every 1200 mm length wise and 600 mm width wise with a backing of 50 mm 1000 GSM thick absorb wool tested as fire retardentcomplete all as specified |
| 75 | M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thoroughand including non metalic, med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sq mmPVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made ofMS sheet concealed in walls and cover with 3 mm thick hylum sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directedMake for copper wire : Finolex, Anchor, Havells, Plaza ,L&TMake of PVC conduit- Finolex/ Supreem/ Prince/ Tiruptathi/ Sudhakar). |
| 76 | (a) Onelight pointcontrolled by one way switch. |
| 77 | (b) One ceiling fan/ exhaust fan point controlled by one one wayswitch. |
| 78 | (c)One 3 pin socket outlet 5 Amps on the Independent board. |
| 79 | All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed. |
| 80 | S&F Switch piano flush type, single pole one way 5 Amps 240 volts,complete all as specified and directed. |
| 81 | Supply and fixingfor ceiling rose 3 terminals |
| 82 | S&F Stepped type electronic fan regulator flush type, complete all as specified and directed. |
| 83 | Supply and fix Switch socket combination 2 in 1, 5 Pin,5 Amps flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells |
| 84 | Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 in 1 flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells |
| 85 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 86 | Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as directed by Engr-in-Charge |
| 87 | Supply and fixing ceiling fans complete with blades, down rods,electronic regulator and accessories, 230 V, 1200mm sweep five star rated with brushless direct current motor (BLDC) |
| 88 | Supply & fix MCB DB SPN 4 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works. |
| 89 | Supply & fix following item including necessary connection in incoming and outgoing complete all as specified:- |
| 90 | (a) MCB SP 6 Amps "C" Curve |
| 91 | (b) MCB SPN 16 Amps "C" Curve |
| 92 | Material and Labour for Submain wiring with 2 runs of FRLS gradePVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through & includingPVC Conduit pipe with all fittingscomplete all as specified and directed. Note: 3 runs of cable and 1 run of PVC conduit will be measured as 1 unit. |
| 93 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying ofGI tubing complete qll as specifiedandas directed. |
| 94 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed. |
| 95 | Supply and layingPipe galvanised steel tubing medium Gread class screwed socket jointing including all Fittings such as bend, elbows, tees, short piece jointer,connector,back nut, cap etcof Size 20 mmdiacomplete all as specified and directed. |
| 96 | Supply and fixing Ball brass valves of size 20mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 97 | Supply and Fix Stop valves, cast copper alloy,screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 98 | Cutting of GI Pipe upto 50 mm diain Positionfor insertion of new TEE, Supply and fixing of Unionand Tee Reducer ofrequired size dimention and reconnecting the main water supply linewith all required fittings complete all as directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
