Public Health Engineering Department-PHED has published Tender For Construction Of Clear Water Sump And Pump House Cum Operator Room And Construction Of 0.20 Lg Capacity Service Reservoir For Wss Heewudder Under Jjm. Submission Date for this Tender is 17-10-2023. Building Work Tenders in budgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Oct-2023 | CORRGIENDUME | Date | 17-10-2023 |
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | All kinds of Soil |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 4 | All kinds of Soil |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 6 | All kinds of Soil |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 9 | Providing and laying hand packed dry stone solling 50mm nominal sizeincluding filling ,spreading ,dreesing and ramming ,all leads lifts with all carriages loading ,unloading and stacking etc complete. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and laying in position specified grade all works upto plinth level of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size)in foundation and plinth |
| 13 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and strutsupto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work on beams, suspended floors, roofs etc in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) mix |
| 15 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | DAMP PROOF COURSE Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 17 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 18 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing inCement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 19 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd class Kail wood |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.2nd Class Kail wood |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm or doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. (35 mm).2nd class Kail Wood, |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 25 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 26 | Shutter |
| 27 | Ball Bearing for rolling shutters |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level . Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 29 | Form work Centering and shuttering including strutting, propping etc. and removal of form for: |
| 30 | Foundations, footings, bases of columns etc. for mass concrete. |
| 31 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 32 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 33 | Suspended floors, roofs, landings, balconies and access platforms. |
| 34 | Arches, domes, vaults upto 6 m span |
| 35 | Extra for arches, domes, vaults exceeding 6 m span |
| 36 | Extra for shuttering in circular work. |
| 37 | Foundation ,Footings etc |
| 38 | Walls (any thickness) including attached pilasters, buttresses, plinth and string coarse etc |
| 39 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 40 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 41 | 15 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 42 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12mm Cement plasterfinished with a floating coat of neat cement of mix: 1 : 3( 1 cement : 3 fine sand) |
| 43 | Providing Constructional joint by inserting PGI sheet of 0.63mm thick and overall width of 0.225m. |
| 44 | Providing and fixing of Lid with angle iron frame and Stair to SR including priming coat and all carraiges complete. |
| 45 | Supplying and filling in plinth with stone boulder, fine sand under floors including, watering, ramming, consolidating and dressing ,carraige complete |
| 46 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 47 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 49 | construction of ring type soakage/ septic pit including excavation and cost cenemt concrete rings. And including cement concrete lid and all carriages complete. |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 52 | Providing and fixing of 80mm dia. Dia Pvc pipes prince / thermax/ finolix grade 2. |
| 53 | Providing and fixing of PVC bends,collar,Tees etc including all carriages complete. |
| 54 | Bends 80mm |
| 55 | Tees 80mm |
| 56 | Collars 80mm |
| 57 | P/Fof 100 mmsoil wastepipe (PVC) prince |
| 58 | Providing and fixing of PVC main hole covers 0.30x0.30 M. |
| 59 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete |
| 60 | 125 mm |
| 61 | 100 mm |
| 62 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 63 | 150x10 mm |
| 64 | 100x10 mm |
| 65 | Providing and fixing of MS hold fasts |
| 66 | Providing and Fixing of looking mirror of size 0.30x0.45 |
| 67 | Provide and Fixing of reducer 100x75mm dia |
| 68 | Providing and fixing oflighting blubs including cost of wire and all accessories, complete |
| 69 | Providing and fixing of heating points including cost of wire and all accessories, complete |
| 70 | Supplying and filling of Main service line 16 gauge from LT pole to main board with MCB control switch and all accessiors complete job. |
| 71 | Providing and fixing 1st quality ceramic glazedtiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 72 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 73 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 74 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 75 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 76 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 77 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded |
| 78 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 79 | Providing and fixing GS coloured 0.63mm thick and 0.225 m wideeavesboarding |
| 80 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m |
| 81 | Providing Fixing of GI pipes with GI fittings |
| 82 | Concealed 15mm Dia |
| 83 | In trenches 20mm Dia |
| 84 | Providing and fixing of Ball cock |
| 85 | Providing and Fixing of Vent pipe PVC 75MM dia |
| 86 | Providing and fixing of Cowel |
| 87 | Providing and fixing GS Sheet soffit 0.63mm thick and 0.60m wide including frame of first class popular wood with jamp pieces 40x40mm with all accessories and carriages complete. |
| 88 | Providing and fixing of steel lid cover of size 0.60x0.60M with angle iron frame and locking aggrement and all carriages complete job |
| 89 | Provision for unforeseen items to be paid as per the direction of Engineer incharge . |
| 90 | Carriageof pipes by Mechnicaltransportfrom sourceupto the dumping siteof work includingloading , un-loadingand stacking etc Avg lead 25Kms |
| 91 | Sand |
| 92 | 40mm agg |
| 93 | Carriageof pipes by Mechnicaltransportfrom sourceupto the dumping siteof work includingloading , un-loadingand stacking etc Avg lead 15 Kms |
| 94 | Cement and steel |
| 95 | Bricks |
| 96 | 20mm aggregate |
| 97 | Carriage of various materials from Dumping site of work to actual site of work by manual labour / ponies including handling / rehandling complete job. Avg.lead 200 mtrs |
| 98 | Cement |
| 99 | Steel |
| 100 | Sand and 20mm aggregate |
| 101 | Bricks |
| 102 | 40mm agg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
