Public Works Department-PWD has published Tender For Balance Work Of Old Building Of Civil Hospital Nerwa. Submission Date for this Tender is 15-10-2023. Building Repair Tenders in nerwa Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in earth work lift up to 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres in pick jumper workincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 2 | Providing and laying cement concrete work 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinthincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 3 | Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5mm so as to give fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu-reinforced concrete and plain concrete work inincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. Foundation footing bases of column and like and mass concrete |
| 4 | Column pillars post and struts. |
| 5 | Beams, cantilever, girders and lintels, sides and soffits of beams, beam launchings, cantilevers, bressumers and lintels not exceeding 1 mtre in depth. |
| 6 | Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200mm in thickness. |
| 7 | Providing and laying cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work inincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. Foundation footings bases of columns and the like and mass concrete. |
| 8 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers up to floor two level. |
| 9 | Columns, pillars, posts and struts up to floor two level. |
| 10 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two levelincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 11 | Boulder filling dry hand packed tightly under floorincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 12 | Brick work using 2nd class common burnt clay building bricks in cement mortar 1:6 (one cement : 6 sand) in super structure above plinth level up to floor two levelincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 13 | Half brick masonry in common burnt clay building brick in cement mortar 1:4 (one cement : 4 sand) second class bricksincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 14 | Providing wood work in frames of doors, windows, clearstory, windows and other frame wrought, framed and fixed in position (i) second class deodar woodincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 15 | Providing and fixing paneled glazed or paneled and glazed shutters for doors, windows and clearstory windows including black enamelled iron but hinges with necessary screws (i) 40mm thick second class deodar woodincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 16 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge designation 85 G with wire of dfia 0.56 mm for doors windows and clearstory windows including bright finished black enameled iron hinges with necessary screws 40mm thick second class deodar woodincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts |
| 17 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) natural colour insulating board 12mm thickincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 18 | Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 300 x 16mm |
| 19 | 250 x 16mm |
| 20 | Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with crews etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 200 x 10mm |
| 21 | 150 x 10mm |
| 22 | Providing and fixing aluminum bundles anodized transparent or dyed to required clour of shade with necessary screws etcetera completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 125mm |
| 23 | 100mm |
| 24 | Providing and fixing 100mm bright finished brass floor door stopperwith rubber cushion screws etc. to suit shutter thickness completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 25 | Providing and fixing 100mm bright finished hard drawn hooks and eyesincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 26 | Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS : 15622 of approved make, in all colours and shade, in skirting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement : 3 course sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments etc. complete size of tile 600 x 600mmincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 27 | White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cementincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 28 | White glazed tiles 6mm thick in skirting riser of steps and dado 12mm thick cement mortar 1:3 (one cement : three sand)and jointed with cement slurryincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 29 | Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (one cement : three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thickincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 30 | Providing and fixing 0.60mm thick preprinted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Chargeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 31 | Providing and fixing ridges or hips 60cm overall with 0.60mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 mcrons over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm diameter and preprinted G.I. limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Chargeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 32 | Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separately)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 33 | Providing steel work in trusses purlins and rafter etc.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. In trusses and trussed purlines in buildingsincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 34 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering above floor two level to floor three level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 35 | 6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement : three sand)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 36 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and papered smooth to give final matter finish to the surface completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 37 | Distempering(two coats) with oil bound washable distemper of approved brand and manufactures and of required shade of ceiling and or sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufactures after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primerincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 38 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equalized on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 39 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushing with white lead for primingincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 40 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give aneven shade including cleaning the surface of dirt, dust and other foreign matter etc. including sand paper smooth completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 41 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give aneven shade including cleaning the surface of dirt, dust and other foreign matter etc. including sand paper smooth completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 42 | Providing plinth protection 50mm thick with cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm nominal sizeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 43 | Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 x 22cm in cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm cement concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) and 7.5 cm cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) and finished with a floating oat of neat cement complete as per standard designincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 44 | Providing and laying cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm nominal sizeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 45 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 46 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of 15.28.2 Asbestos cement sheetincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 47 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metr5es lead as per direction of Engineer-in -Charge 15.7.4 in cement mortarincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 48 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leadincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 49 | Providing and fixing vitreous China Wash down water closet (European) Type W.C. Pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (sheet and cover to be measured and paid for separately) (Anglo Indian universal closet)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 50 | Providing and fixing PTMT Cloured/white high density polyethylene/poly propylene 10 liters capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve, siphon, 15mm nominal size PVC ball calve with polythene float, with plush button, copulings for connections with inlet, outlet and over flow pipe, 50m dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured nd paid for separately)including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 51 | Providing and fixing plastic seat (Solid/hollow type) and cover for wash down water closet with C.P. bass hinges and rubber buffers a white plastic sheet and coverincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 52 | Providing and fixing vitreous China bowl pattern urinal flat back type of size 430 x 260 x 350mm and 340 x 430 x 265mm size respectively with automatic flushing cistern with fittings R.S. or C.I. brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreader with brass union and G.I. Clamps complete including painting of cistern and fittings, cutting and making good the walls, floors, where required ) pine urinal base with 5 litres C.I. Automatic flushing cisternincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 53 | Providing and fixing plastic seat (Solid/hollow type) and cover for wash down water closet with C.P. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. Flat Black 550 x 400mmincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 54 | Providing and fixing CP brass waste for wash basin or sink 32mmincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 55 | Providing and fixing 100mm sand cast iron grating for gully floor or Nahni trapincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 56 | Providing and fixing CP brass bib tap with capstan head 15mm diaincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 57 | Providing and fixing CP brass pillar tap with capstan head 15mm diaincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 58 | Providing and fixing 15mm diametre brass stop cockincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 59 | Providing and fixing CP brass full way valve with wheel 15mmincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 60 | Providing and fixing polyethylene aluminium polythene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon conforming to IS : 15450-2004 for water supply including clamps at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall 1216 (16mm O.D.) pipeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 61 | Providing and fixing composite and seal compression fittings as per IS 15450-2004 for cold water supplyfor example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fixing complete including cutting and making good the wall etc.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) Equal tee 1216 |
| 62 | Female branch tee 1216 x 1216 x 15mm thread |
| 63 | Female elbow 1216 x 15mm thread |
| 64 | Couplers 1216 |
| 65 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 110mm dia |
| 66 | 75mm dia |
| 67 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.. (i) 110mm dia |
| 68 | 75mm dia |
| 69 | Providing and fixing PVC door bend with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 110mm dia |
| 70 | 75mm dia |
| 71 | Providing and fixing PVC collars ISI marked including fixing with apaproved adhesive etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 110mm dia |
| 72 | 75mm dia |
| 73 | (i) 110mm dia |
| 74 | 75mm dia |
| 75 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and crawl plug etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. (i) 110mm dia |
| 76 | 75mm dia |
| 77 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good in the walls and floors et. Completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. 110mm x 90mm |
| 78 | Providing and fixing PVC connection pipe with brass unions 300/450mm length 15mm nominal boreincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 79 | Providing fixing 100mm diametre PVC cowl ISI market including fixing with approved adhesive etc. completeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
| 80 | Providing and fixing 19mm thick water proof termite resistant commercial board box and its shelves including 19mm thick commercial board shutter with back side of the cabinet of 8mm thick ply and cut portion of theshelves shall be finished with 6mm hard wood edging complete including piano hinges and other accessories complete as per drawing, design and direction of Engineer-in-Chargeincluding carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
