Military Engineer Services-MES has published Tender For Addition/Alterations To Cook House Bldg No Dd1a And Dd2a Of 908 Med Regt Under Garrison Engineer Amritsar Cantt. Submission Date for this Tender is 03-11-2023. Building Work Tenders in amritsar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Oct-2023 | Corrigendum NO 01 | BOQ | 27-10-2023 |
| 2 | 27-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-11-2023 |
| Sl. No. | Item Description |
| 1 | Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm ; Complete all as specified and directed by Engineer-in-charge. |
| 2 | Taking down chowkhats or frame without taking of shutter and removing from siteexc 1.5sqmbut not exceeding 4 sqm each; Complete all as specified and directed by Engineer-in-charge. |
| 3 | Taking down chowkhats or frame (w/o taking off shutters) and removing from site n.exc 1.5sqm each; Complete all as specified and directed by Engineer-in-charge. |
| 4 | Taking down cement plaster from wall"s/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries upto distance n exc 500 metre where directed; Complete all as specified and directed by Engineer-in-charge. |
| 5 | Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 50 mtrswhere directed; Complete all as specified and directed by Engineer-in-charge. |
| 6 | Demolation of RCC in any position not otherwise specifically provided; Complete all as specified and directed by Engineer-in-charge. |
| 7 | Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping,rounded or chamfered on edges andlike including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work ; Complete all as specified and directed by Engineer-in-charge. |
| 8 | Material and Labour for brick work with sub Class "B" old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6; Complete all as specified and directed by Engineer-in-charge. |
| 9 | Material and labour for 15mm thick cement plaster in CM (1:6) onfair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.; Complete all as specified and directed by Engineer-in-charge. |
| 10 | Material and labour for 10 mm thick cement plaster in CM (1:3) onconcrete surfaces of ceilingand finishing the surface even and smooth (without using extra cement) etc; Complete all as specified and directed by Engineer-in-charge. |
| 11 | Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick workand finishing the surface even and smooth (without using extra cement) etc. ; Complete all as specified and directed by Engineer-in-charge. |
| 12 | Material and Labour for preparation of new plastered surfaces and applying two coatsof oil bound distemperon walls; Complete all as specified and directed by Engineer-in-charge. |
| 13 | Material and Labour for preparation of olddecorated plastered surfaces, filling nail holes or patches with wall care putty to make surface smoothand applying two coatsof oil bound distemperon walls ; Complete all as specified and directed by Engineer-in-charge. |
| 14 | Material and Labour for preparation of new plastered surfaces and applying three coatsof white washon ceiling; Complete all as specified and directed by Engineer-in-charge. |
| 15 | Material and Labour for preparation of old plastered surfacesfillingholes or patches with wall care putty to make surface smooth and applying one coatof white washon ceiling; Complete all as specified and directed by Engineer-in-charge. |
| 16 | Material and Labour for complete removal of existing treament including preparation of surfaces and applying two coatsof cement base painton walls ; Complete all as specified and directed by Engineer-in-charge. |
| 17 | Use and waste of formwork to Chullah hoods, chajjas,slab, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete; Complete all as specified and directed by Engineer-in-charge. |
| 18 | Material and Labour for RCC 1:1/1/2:3 ) using 12.5 mm mm graded stone aggregatesas inSlabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like; Complete all as specified and directed by Engineer-in-charge. |
| 19 | Material and Labour for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips ; Complete all as specified and directed by Engineer-in-charge. |
| 20 | Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges; Complete all as specified and directed by Engineer-in-charge. |
| 21 | Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges; Complete all as specified and directed by Engineer-in-charge. |
| 22 | Supply and Fixing Steel window 1.25mm thick box typeERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gausedSkelton shutterERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thickwith following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 i)Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi)pintol hinges 12 x 75 mm- 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c. (viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) (x) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter ofwindow (xi) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5sqm in each pane fixed in glaxed / gazed skelton shutter of window. (xii) Fabrication and fixing arrangements as per Drg No CE JZ/TD-06-07 including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface; Complete all as specified and directed by Engineer-in-charge. |
| 23 | Supply and Fixingmild steel box type ventilator fixed type with glazing bar with mesh & glass as perprimer coated; Complete all as specified and directed by Engineer-in-charge. |
| 24 | Supply and fixing 30 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side; Complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply and Fixing 30 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters as per SSR Part-I Section-8 clause 8.2 (a); Complete all as specified and directed by Engineer-in-charge. |
| 26 | Hacking out old broken glass any thickness, size, quality or description from steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads; Complete all as specified and directed by Engineer-in-charge. |
| 27 | Supplyand fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes; Complete all as specified and directed by Engineer-in-charge. |
| 28 | Supplyand fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples; Complete all as specified and directed by Engineer-in-charge. |
| 29 | Supplyand fixing in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples; Complete all as specified and directed by Engineer-in-charge. |
| 30 | Supplyand fixing 300 mm size, aluminiumalloy,anodized sliding door bolt, clip type,and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw ; Complete all as specified and directed by Engineer-in-charge. |
| 31 | Supplyand fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-charge. |
| 32 | Supplyand fixing in repairs 150 mm size aluminium anodized barrel tower boltof extruded section fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-charge. |
| 33 | Supply and fixing in repairs 250mm mild steel ordinary rat tail rod pattern spring including roller plateincluding fixing with nailsd/ bolts or welded; Complete all as specified and directed by Engineer-in-charge. |
| 34 | Supplyand fixingin repairs125 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-charge. |
| 35 | Supply and fixingmild steel powder coatedcurtain rods 25 mm diaincluding knobs, brackets tohold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings; Complete all as specified and directed by Engineer-in-charge. |
| 36 | Material & Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer; Complete all as specified and directed by Engineer-in-charge. |
| 37 | Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint; Complete all as specified and directed by Engineer-in-charge. |
| 38 | Material and labour for applyingtwo coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girthincludingpreparation ofnew surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 39 | Material and labour for preparation of old painted steel surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint; Complete all as specified and directed by Engineer-in-charge. |
| 40 | Taking up or down steel water tubing and connectionsincluding cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm; Complete all as specified and directed by Engineer-in-charge. Note :- The quoted rates shall be include for necessary excavation andearth work, cutting/ chasing in wall/ floor and making good in CM1:3; Complete all as specified and directed by Engineer-in-charge. |
| 41 | Taking up or down steel water tubing and connectionsincluding cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 20mm; Complete all as specified and directed by Engineer-in-charge. Note :- The quoted rates shall be include for necessary excavation andearth work, cutting/ chasing in wall/ floor and making good in CM1:3; Complete all as specified and directed by Engineer-in-charge. |
| 42 | Supply and fixing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor; Complete all as specified and directed by Engineer-in-charge. |
| 43 | Supply and fixing galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor; Complete all as specified and directed by Engineer-in-charge. |
| 44 | Supply and fixingin repairs PVC connection 450mm long of 15mm size with PTMT nutson both sides; Complete all as specified and directed by Engineer-in-charge. |
| 45 | Supply and Fixing in repairs bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs; Complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply and Fixing in repairs stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc; Complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply and Fixing in repairs angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc; Complete all as specified and directed by Engineer-in-charge. |
| 48 | Supply and fixing in repairs bevelled edge mirror ofsize 600mmx450mm , 6mm thick of selected quality glass, mounted on 6mm thickcommercial plywood including teak wood beading allround and fixed to wooden plug with chromium plated brass screw and cup washer and including clamps with wooden / plastic frame; Complete all as specified and directed by Engineer-in-charge. |
| 49 | Supplyand fixingin repairs viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections; Complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore; Complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and fixing Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minium weight 190 gms); Complete all as specified and directed by Engineer-in-charge. |
| 52 | Dismantaling floor hearth or wall tiling incl cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises; Complete all as specified and directed by Engineer-in-charge. |
| 53 | Material and Labour for glazed ceramic coloured tiles in vertical surface of size 350x250x7mm/ 450x350x7mmmm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles ; Complete all as specified and directed by Engineer-in-charge. |
| 54 | Material and Labourjoint free Non skidcoloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to matchincluding 15 mm thick screed bed in cm 1:6 ; Complete all as specified and directed by Engineer-in-charge. |
| 55 | Material and Labourjoint free Non skidcoloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.38 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match over 10mm thick cement plaster in 1:4; Complete all as specified and directed by Engineer-in-charge. |
| 56 | Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exc 0.42 but n exc 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes; Complete all as specified and directed by Engineer-in-charge. |
| 57 | Dismantling boarding , any description , fixed in any position with screws; Complete all as specified and directed by Engineer-in-charge. |
| 58 | Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour forProviding and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applyingtwo coat of OBD on ceiling over chalk whitening; Complete all as specified and directed by Engineer-in-charge. |
| 59 | Supply and fixing10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet Suitably placed fixing in Aluminium door etc; Complete all as specified and directed by Engineer-in-charge. |
| 60 | Supply and Fixing Anodised aluminiumframefor doors,windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Teeetc section for weighing not less than 1.4 kg/RM; Complete all as specified and directed by Engineer-in-charge. |
| 61 | Supply and Fixing Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.; Complete all as specified and directed by Engineer-in-charge. Note:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely. |
| 62 | Supply and Fixing Providing and fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats,complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely. |
| 63 | Supply and Fixing 5.5 mm thick sheet glass ordinary quality in square or rectangularin size n.exc .5 sqm each in aluminium door or window shutter including taking out old damaged glass pane; Complete all as specified and directed by Engineer-in-charge. |
| 64 | Supply and Fixing for aluminium door & window, aluminium wire cloth, .36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge. |
| 65 | Material and Labour for Solid PVC WallLining consisting of 5 mm thick Plain Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing completeany description,fixed inanyposition ; Complete all as specified and directed by Engineer-in-charge. |
| 66 | Material and Labour for 5 mm thk PVC sheet fillet of width 35 mm for wall Paneling inclusive of fixing on to wall tomake PVC Frame as /U chhanelper specification as directed by the Engineer-in-charge. |
| 67 | Supply and Fixing Double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 68 | Supply and FixingBrass mortice lock, 4 levers, verticle type, size 100 mm,; Complete all as specified and directed by Engineer-in-charge. |
| 69 | Supply and Fixing Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mmetc. |
| 70 | Supply and Fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixinf approved anodised aluminium standard section around the opening, all complete as per requirements and direction of Engr-in-charge. |
| 71 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas; Complete all as specified and directed by Engineer-in-charge. |
| 72 | Material and Labour for 50mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floor; Complete all as specified and directed by Engineer-in-charge. |
| 73 | Material and Labour for Machine cut kota stone slab flooring16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to achieve mirror finish laid over & including 20 mm thic screed bed in CM 1:6; Complete all as specified and directed by Engineer-in-charge. |
| 74 | Material and Labour for Machine cut kota stone slab flooring 16-18mm thick in riser of steps skirting dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to achieve mirror finish laid over & including 10 mm thic screed bed in CM 1:6; Complete all as specified and directed by Engineer-in-charge. |
| 75 | Material and Labour for 18mm thick PVC board in cup board shelve as in kitchen complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge) |
| 76 | Material and Labour for 20 mm thick pvc shutter, printed one side with one coting of ultra violet chemical, glossymat finish inc 100% termite/water proof, fireretrandenteco friendly. Weight not less than 12 kg per sqm incl Steel piano hinges, steel catcher,aluminium handle100 mm long,aluminium hasp & stapplein repairs complete all as specified ( shade / design / size as approved by Enginner -in-Charge); Complete all as specified and directed by Engineer-in-charge. |
| 77 | Dismantling ofPVC/CI pipeof 75/100mm dia fixed with cement joint; Complete all as specified and directed by Engineer-in-charge. |
| 78 | Supply and Fixing PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls; Complete all as specified and directed by Engineer-in-charge. |
| 79 | Supply and Fixing PVC (SWR) pipes 110mm dia bend any radius; Complete all as specified and directed by Engineer-in-charge. |
| 80 | Supply and Fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors; Complete all as specified and directed by Engineer-in-charge. |
| 81 | Material and Labour PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement; Complete all as specified and directed by Engineer-in-charge. |
| 82 | Material and labour formachine pressedcoloured chequeredcement concrete tile ISI Marked of size 30cm x30cmx22-25mm thick over and including 15mm thick cement screed in CM 1:6set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles; Complete all as specified and directed by Engineer-in-charge. |
| 83 | Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site; Complete all as specified and directed by Engineer-in-charge. |
| 84 | Demoliton of mud in roof any thickness including mud plasteringand removing to distance exc 250m but n exc 500m; Complete all as specified and directed by Engineer-in-charge. |
| 85 | Material and labour forPCC 1:2:4 type B-0(using 12.5 mm graded crushed stone aggregate) as in roof kerbs, sloping paddingand finishing the surface even and smooth(without using extra cement); Complete all as specified and directed by Engineer-in-charge. |
| 86 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade@1.2 Kg/Sqm includingcleaning surfaces etc; Complete all as specified and directed by Engineer-in-charge. |
| 87 | Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portionwith overlapping 100mm to eiher side; Complete all as specified and directed by Engineer-in-charge. |
| 88 | Material and labour for 40 mm thick brick tiles laid over andincluding 15mm thick bedding layer in cement mortar 1:6 andjointed, grouted and flush pointing as work proceed in CM 1:3 mixed with 5% of crude oil by weight of cement; Complete all as specified and directed by Engineer-in-charge. |
| 89 | Material and labour forbrick tilesbut except tiles (Serviceable brick tiles obtained from dismantling shall be reused ) laid over andincluding 15mm thick bedding layer in cement mortar 1:6 andjointed, grouted and flush pointing as work proceed in CM 1:3 mixed with 5% of crude oil by weight of cement; Complete all as specified and directed by Engineer-in-charge. |
| 90 | Material and labourudaipur green marble 16-18mm thick confirming to sample kept in GE "s office ( table rubbed and polished inslab, stair case, step and like jointed with grey cement slurry mixed with pigment to matchwith shade of marble over and including 15mm thick cement screed bed in CM (1:6); Complete all as specified and directed by Engineer-in-charge. |
| 91 | Supply and Fixing mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel, hollow tube or flat sections) including distance pieces , cleats etc including welding of joint; Complete all as specified and directed by Engineer-in-charge. |
| 92 | Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws; Complete all as specified and directed by Engineer-in-charge. |
| 93 | Material and Labour for preparation of untreated steel/iron surfaces of any description ,over 10 cm in width or girth,not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer; Complete all as specified and directed by Engineer-in-charge. |
| 94 | Material and Labour for Cement concrete type C-2, 1:3:6 using 40mm graded agregate asin foundations, filling and mass concrete; Complete all as specified and directed by Engineer-in-charge. |
| 95 | Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface; Complete all as specified and directed by Engineer-in-charge. |
| 96 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 sqm on plan and getting out in soft/loose soil; Complete all as specified and directed by Engineer-in-charge. |
| 97 | Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each; Complete all as specified and directed by Engineer-in-charge. |
| 98 | Removing excavated material to a distance exc 250mtr but n.exc 500 mtr and depositing where directed at a level not exc 1.50 metre above the starting point; Complete all as specified and directed by Engineer-in-charge. |
| 99 | Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface; Complete all as specified and directed by Engineer-in-charge. |
| 100 | Material and Labour Cement concrete type D2, 1:4:8 using 40mm graded agregate asin foundations, filling and mass concrete; Complete all as specified and directed by Engineer-in-charge. |
| 101 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairss and white / colour wash etc.; Complete all as specified and directed by Engineer-in-charge. |
| 102 | Supply and Fixingpoint wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit ISI marked concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface)and sunk cast ironor pressed steel terminal boxes for mounting fittinglike switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm sizecopper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One light/one fan/one bell point controlled by one, one way switch. |
| 103 | Supply and Fixingpoint wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface)and sunk cast ironor pressed steel terminal boxes for mounting fittinglike switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm sizecopper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One socket outlet 3 pin 5 Amp controlled by one, one way switch on independentboard. |
| 104 | Supply and Fixingpoint wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface)and sunk cast ironor pressed steel terminal boxes for mounting fittinglike switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm sizecopper conductor cable as in earth wire and connected to common earth dolly ; Complete all as specified and directed by Engineer-in-charge. One socket outlet 3 pin 5 Amp controlled by one, one way switch on same board. |
| 105 | All as per itemhere in before but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm sizecopperwire for one 3 pin socket outlet, 15 Amperes on independent board. |
| 106 | Supply and Fixing of switch piano flush button single pole one-way 5 Ampere; Complete all as specified and directed by Engineer-in-charge |
| 107 | Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC; Complete all as specified and directed by Engineer-in-charge |
| 108 | Supply and fixing of switch outlet 2 in 1 , 3 pin 15 Amps Flush Type; Complete all as specified and directed by Engineer-in-charge |
| 109 | Supply and Fixingstepped type electronic Fan regulator Flush type; Complete all as specified and directed by Engineer-in-charge |
| 110 | Supply and Fixing Ceiling rose, surfacebakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thickbakelite, laminated hylem sheet of appropriate size ; Complete all as specified and directed by Engineer-in-charge |
| 111 | Supply and Fixinglamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings; Complete all as specified and directed by Engineer-in-charge |
| 112 | Supply and Fixingwall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete withall acessories 1x18 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection; Complete all as specified and directed by Engineer-in-charge |
| 113 | Supply and Fixingenergy saving new generation 10 watt LED built up, 6000kbulk head luminaire with opal diffuser light fitting complete with all acessories and connection; Complete all as specified and directed by Engineer-in-charge |
| 114 | Material and Labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 3 runs of 4 sqmm single core multistranded copper conductor PVC insulated cables as neutral continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dollyincluding taking down all sub main wiring; Complete all as Specified and as directed by Engineer-in-Charge. |
| 115 | Supply and Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type; Complete all as specified and directed by Engineer-in-charge |
| 116 | Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC ; Complete all as Specified and as directed by Engineer-in-Charge. |
| 117 | Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protectionIncludingsuitable sizeand accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting ; Complete all as Specified and as directed by Engineer-in-Charge. |
| 118 | Supply and FixingGI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting36/40 Wattincluding connection; Complete all as Specified and as directed by Engineer-in-Charge. |
| 119 | Supply and FixingMCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 8 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plateincluding taking down old MCCB all as specified and directed ; Complete all as specified and directed by Engineer-in-charge. (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) |
| 120 | Supply and Fixing ceiling fan 5 star rating 1200 mm sweep complete including fittings and fixture as per site reqt and complete accessories 230 Volts single phase 50 Hz AC supply and connection up with and including two core PVC insulated , PVC sheathed copper conductor ; Complete all as Specified and as directed by Engineer-in-Charge. |
| 121 | Supply and Fixing exhaustfan 300 mm sweep including cutting of wall /window/lowers and fixing arrangement; Complete all as Specified and as directed by Engineer-in-Charge. |
| 122 | Material and Labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. Note: - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt. (iii) Earthing work will be done by contractor ub presence of JE /Engr-in-Charge, the earthing work carried in absence JE /Engr-in-Charge will not neasured & paid for the same. (iv) All earthing material will be approved before bulk procurement and got approved from Engr-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
