Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-10-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-11-2023 |
| 2 | 16-10-2023 | Corrigendum57 | BOQ | 27-10-2023 |
| Sl. No. | Item Description |
| 1 | Taking down shutters exc 1 sqm and n.exc 2 sqm eachand removing from site complete all as specified and directed. |
| 2 | Taking down frame with shutters (without taking off shutters from frame)n.exc 1.5 sq.m each and removing from site complete all as specified and directed. |
| 3 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified and directed. |
| 4 | S&F 2nd class hard-woodPlain, solid, straight chowkats and frames, wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 5 | M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed. |
| 6 | S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 7 | S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 track and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed. |
| 8 | S&F aluminium anodised door shutters powder coated of any colour (Thickness or powder coating not less than 50 micron Anodised , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified and directed. |
| 9 | S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron , fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified |
| 10 | S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long 01 nos, hinges type B-21, 100mm long 02 Nos, suitable handle 01 nos, locking arrangement etc. complete all as specified |
| 11 | S&F anodised aluminium grill (anodised transparent or dyed to requird shade according o IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame withC.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening including powder coated aluminium (minimum thickness of powder coating 50 micron) all complete all as specified and directed. |
| 12 | S&F 5.5mm thick sheet glass selected quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 13 | S&F 5mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 14 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 15 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 16 | Dismantling wall and ceilingboards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 17 | S&F 12mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping complete all as specified and directed. |
| 18 | S&F 1.5mm thick decorative laminate type 1 of surface finish, colour and patternincluding necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 19 | S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed. |
| 20 | S&F 2mm thick linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting complete all as specified and as directed. |
| 21 | S&F 6mm thick Non Asbestos fibre cement designer board /Pre Laminated self embosssed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured)to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clipcomplete all as specified and directed. |
| 22 | S & F mild steel butt hinges medium weight colled rolled 100mm size complete all as specified and directed. |
| 23 | S & F mild steel butt hinges medium weight colled rolled 75mm size complete all as specified and directed. |
| 24 | S & F 150 mm size extruded aluminium handles fabricated type, anodisedall as specified and directed. |
| 25 | S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed. |
| 26 | S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloyall as specified and directed. |
| 27 | S & F 100 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 28 | S & F 30mm width flap, Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed. |
| 29 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 30 | M&L for brickwork with old size sub class \"B\" bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 31 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 32 | M & L for rendering 15mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair complete all as specified and directed. |
| 33 | M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and faircomplete all as specified and directed. |
| 34 | M&L for raking out joints/pointing to random rubble masonryuncoursed or brought up to courses on old walls built in cement mortarcomplete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 36 | S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | S&F stainless steel railing of Grade 304 including necessary fittings & fixtures as appproved by GE complete all as directed |
| 38 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchfixed over and including 15mm thick screed bed in CM 1:6,including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etccomplete all specified and directed. |
| 39 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4,including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etccomplete all as specified and directed. |
| 40 | Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 41 | S&F 12mm thick toughned glass as in hinged door, partitions automatic door with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design in printing of unit logo and unit name over the glass at door as approved by GE complete all as specified and directed. |
| 42 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed |
| 43 | M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed. |
| 44 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,complete all as specified and directed. |
| 45 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 46 | S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 47 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 48 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 49 | Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 40mm thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging where required, complete all as specified and directed. |
| 50 | Lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with, 40mm thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging where required, complete all as specified and directed. |
| 51 | S & F in repairs sinks with drainage board (double bowl) made of stainles steel 1 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets andconnecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall)for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 53 | S& F in repair cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia of outlet complete all as specified and directed. |
| 54 | S& F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe complete all as specified and directed. |
| 55 | S& F in repair vitreous China Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CP health faucet, PVC seat cover (closed pattern) connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, health facet etc complete all as specified and directed. |
| 56 | S& F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene high or low density or PVC 32mm dia ofcomplete all as specified and directed. |
| 57 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 58 | S&F in repairs 125mm brass chromium plated shower rosesincluding fixing to steel pipe complete all as specified and directed. |
| 59 | S&F in repairs vitreous china Oval type countersunk Wash hand basin inclusive 32mm dia waste fittings, brass, chromium plated , PVC waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed. |
| 60 | S&F in repairstoilet paper holder, brass chromium plated,fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 61 | S&F in repairs soap dish, brass chromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 62 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 63 | S&F in repair 900mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washersl complete all as specified and directed. |
| 64 | S&F in repairs brass chromium plated Tubular towel rail 20mm dia (selected quality) complete all as specified and directed. |
| 65 | S&F in repair towel ring of brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleatsall as specified and directed. |
| 66 | S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 67 | S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 68 | S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 69 | S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part Iincluding dismantling old unserviceable PVC water tanks complete all as specified and directed. |
| 70 | Demolition of plain cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed. |
| 71 | M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorslaid over and including20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 72 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completefixed over and including15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 73 | M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed. |
| 74 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified. |
| 75 | Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed. |
| 76 | M&L for RCC (nominal mix)1:2:4 type B-1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork complete all as specified and directed. |
| 77 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 78 | Dismantling of plain or corrugated steel sheeting, anygauge thickness , including nanital or similar pattern roof covering complete all as specified and directed. |
| 79 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed. |
| 80 | S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etccomplete all as specified. |
| 81 | Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified. |
| 82 | M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified. |
| 83 | M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 84 | M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 85 | M & L forfor applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces complete all specified and directed. |
| 86 | M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 87 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed. |
| 88 | M & L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed. |
| 89 | M&L for applying 2mm thick wall care white putty after complete removal of existing treatment from old plastered surfaces andto obtain smooth/even finish using sand paper complete all as specified and directed. |
| 90 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 91 | S & F in repairs stainles steel plate rack of size 750mmx 750mm/60mmx900mm made of 1mm thick stainless steel sheet and fixed to wall with stainless steel screws complete all as specified and directed. |
| 92 | S&F in repairs 100mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed. |
| 93 | S&F in repairs 75mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed. |
| 94 | S&F in repairs Harrison rails (curtain rails) , mild steel, chromium plated, 20mm bore with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 95 | S&F wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufracturer\"s instruction all as specified and directed. |
| 96 | S&F 35mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 97 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 98 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 99 | S&F 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified. |
| 100 | M & L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts;staging for water tanks wall ties; hooks for hanging fans; plain angle cleats for securingpurlinstowood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 101 | M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 102 | M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 103 | S&F in repair aluminium (die cast body) door closer hydraulically regulated, designation No.3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 104 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 105 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and faircomplete all as specified and directed. |
| 106 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all specified and directed. |
| 107 | Excavation in post holes (or similar holes) each n. exc. 0.5 cum in any type of soil and getting out returning filling in and ramming earth or broken rubble mixed with eareth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed. |
| 108 | M & L for PCC 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and directed. |
| 109 | M&L mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed. |
| 110 | S&Frolled mild steel plates (plain or chequrred) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of grade FE-410W (Gde E 250 quality A ) complete all as specified and as directed. |
| 111 | M&L for preparation of new or previously untreated steel surfaces of any descriptionnot exc10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 112 | S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lamp fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 113 | M & L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in foot path complete all as specified and directed. |
| 114 | M&L for brick work with sub-class \"B\" bricks, straight or curved on plan to any radius in half brick thickwalls, built in cement mortar 1:4 complete all as specified and directed. |
| 115 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in cills, steps; seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 116 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed. |
| 117 | M& L for marble work 18-20 mm thick (any type) table rubbed & polished in steps, ambs, cooking platforms, window cills & the like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigment to match with shade complete all as specified anddirected. |
| 118 | Roughening surface of old concrete floor/plastered surface by picking, sweeping clean and washing down with water to remove dust and vrushing with neat cement slurry @ 3Kg per sqm complete all as specified and directed. |
| 119 | M&L for chequered cement concrete tiles with grey cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorslaid over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 120 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in any type of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed. |
| 121 | M&L for PCC 1:4:8type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed |
| 122 | Form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed. |
| 123 | M&L for RCC 1:2:4, Type B-1, using 20mm graded crushed stoneaggregate as in foundation of coloumn footings,plinth beams, bases for columns , basement slabs etc. complete all as specified and directed. |
| 124 | Form work to sides of pillars posts, struts, piers, columns and stanchion for fair finished surface complete all as specified & directed. |
| 125 | M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded stone aggregate for column, pillars piers posts and struts etc complete all as specified & directed. |
| 126 | M&L for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers etc for rough finished flat surface of concrete complete all as specified and directed. |
| 127 | M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumners, lintels over 1.5m span complete all as specified and directed. |
| 128 | Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed. |
| 129 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 130 | M&L for Mild steel TMT bars 5 to 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 131 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 132 | M&L coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 133 | S&F rolled mild steel as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410-W Gde E-250 quality \"A\" complete all as specified and directed. |
| 134 | S&F mild steel as in framed work as in wind tie for roof including securing bolts posts and struts in fencing including cutting tops to shape asdirected, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 135 | Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 136 | M&L for point wiring with PVC insulated FRLSH wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area)any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its allconnected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.6 mm thick orPVC flush type boxand dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered with frame platefor housing / mounting of modular type switches, sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked)with multistranded copper conductorwire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:- |
| 137 | One light/fan point controlled by one way switch 5 Amp |
| 138 | One 3/5 pin socket outlet, 5 Amps on same board |
| 139 | One 3/5 pin socket outlet, 5 Amps on independent board |
| 140 | One bell point controlled by one way switch 5 Amp |
| 141 | All as per Sl item No. 136 above butusing single runs of PVC insulated FRLSH wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked)for 3/6 pin type15 Amp socket outlet point wiring system with controlled by one wayswitch fixed on independent boardand also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked)with multistranded copper conductorwire used as continuous earth wire complete all as specified and directed |
| 142 | S&F modular type switch 5/6 Amps 230 Volts , one module type/ size complete for one way switching system complete as specified and directed. |
| 143 | S&F modular type socket5/6 Amps AC 230 Volts3/5 pin type combined with two modular type/sizecomplete all as specified and asdirected. |
| 144 | S&F modular type switch 15/20 Amps 230 Volts , one module size/type for one way switching system complete all as specified and asdirected. |
| 145 | S&F modular type socket15/20 Amps AC 230 Volts5/6 pin type combined with two modular size/type complete all as specified and directed. |
| 146 | S&F modular type bell push switch 5/6 Amps 230 Volts , one module size/type for one way switching system complete all as specified and asdirected. |
| 147 | S&F modular type fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts , one module size/type complete for one way switching systemcomplete all as specified and asdirected. |
| 148 | S&F bell Ding DongType, AC 230 volt, Single Pole complete all as specified and asdirected. |
| 149 | S&F ceiling rosethree terminals type made out ofpolycarbonate , isolated body completeall as specified and directed. |
| 150 | S&F LEDlightfitting fixture of 20W, 6000K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete including providing of suitable type flate fexible cablefor electric connection comlplete all as specified and directed. |
| 151 | S&F LED Mirror light fitting 10W, 6000Kdecorative ultra slim linear LED lighting fixture with extruded AL. heat shrink, environmental friendly, energy efficient, including providing of suitable type flate fexible cablefor electric connection comlplete all as specified and directed . |
| 152 | S&F ventilating exhaust fan made out of sturdy high quality engineering plastic, complete with louvers,and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall compete all as specified and directed. |
| 153 | S&F Sub main wiring system with two runs PVC insulated FRLSH wire, 1100 volt grade with multistranded copper conductor wire of size2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall includingtaking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM. |
| 154 | S&F sheet metal enclosure duly powder coated with locking arrengment systemand having double doorTPN 4 way distribution boardwith IP-43 1K-09 protection system and having mounting chanel and connection bus bar systemsuitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase powe supply , complete with appropriate size copper bus bar and neutral and earth link complete alongwith providing of 01No MCCB 160 Amps rating with rupturing cap 25 KA 3 pole 415 Voltsand also12 Nos of MCB SP 63 Amps \"C\" Curve of the same make as of distribution board complete& including taking down of existing DBs with MCBsand making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface as per existing complete all as specified and directed. |
| 155 | S&F sheet metal enclosure duly powder coated with locking arrengment systemand having double doorSPN 8 way distribution boardwith IP-43protection system and having mounting chanel and connection bus bar system with having capacity200 Amps and suitable size of common neutral link including taking down of existing DBs with MCBsand making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface as per existing complete all as specified and directed. |
| 156 | S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for \"C\" series, 10 KA breaking capacity complete all as specified and directed. |
| 157 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for \"C\" series, 10 KA breaking capacity complete all as specified and directed. |
| 158 | M& L for taking down carefullyexisting storage water heater any type any size andremoving pvc connectionincluding cleaning of inner tank and assembly andfilling cavities with filler material,including painting geyser with mounting base complete one coat of synthetic enamel whitepaint by spraying and assemble the same and refixing at location as directed, alongwith all connecting fixing accessories like fastner/ nut, bolt, washer, PVC connection and Valve etc withall electrical wire connection completeall as specified and directed. |
| 159 | M& L for taking down carefullyexisting ceiling fan /exhaust fan any type sweep andremoving fan bladeincluding cleaning all dust particles andfilling cavities with filler material, oiling, greasing and painting fan & blade with one coat of synthetic enamel whitepaint by spraying and assemble the same alongwith all connecting fixing accessories like rubber rell, nut, bolt, washer, lock pin etc and hangingthe same in position along with all electricalwire connection complete all as specified and directed |
| 160 | Supply and laying GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe onpole/wall inproper size of clamps, nut bolt and washer etc complete all as specified and directed. |
| 161 | Supply and laying GI pipe 50 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe onpole/wall inproper size of clamps, nut bolt and washer etc complete all as specified and directed. |
| 162 | Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 25 sqmm 4.0core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 163 | Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depthfor laying of pipe / cable in any type of soft /loose soil and getting out etc complete all as specified and directed. |
| 164 | Dry sand cushioning to underground cable provided with layer of 8cms thickbefore laying the cable and 15cms thick after laying and stretching the cable and punned to 18 cm thick complete all as specified.(Note:Only punned thickness shall be measured for payment purpose). |
| 165 | M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class \"B\" bricks laid dry flat acomplete all as specified and directed. |
| 166 | S&F LED street light fitting 45 Watt with lense, toughned glass, IP-66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistantcomplete with making suitable size of bracket and MS clamps dully fixed on wall including providing of suitable type flate fexible cablefor electric connection comlplete all as specified and directed. |
| 167 | M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.NOTE: Item of earthing includes the cost of 7.5m long galvanized iron earth wire 4mm size and protection pipe of 15mm bore galvanized iron light grade. |
| 168 | Supply only manure at site including royalty and carriage for preparing compost at site (manure shall be brought at site and stacked for measurement before arboriculture incorporating in the work 8 % computed volume shall be reduced for loose stacking complete all as specified and directed. |
| 169 | Supply only fine sand at site including royalty and carriage for preparing compost at site (same shall be brought at site and stacked for measurement before incorporating in the work) complete all as specified and directed. |
| 170 | Supply only sweet/good earth at site including royalty and carriage for preparing compost for pits/required for planting trees and shrubs etc (sweet/good earth free from objectionable extraneous matter, toxic material and termites shall be brought at site, complete all as specified and directed. |
| 171 | Preparing compost pits of size 0.50m x 0.50m x 0.60 to 0.90m by excavation in ordinary soil and removing,leveling /dressing, applying ant termite treatment, planting the tree & refilling of pit with compost (manure, sand & sweet earth mixed in ratio 1:1:4 breaking clods ramming and flooding, complete all as specified and directed. |
| 172 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting in soft /loos soil., complete all as specified and directed. |
| 173 | Removing excavated material exeeeding500 M but not exceeding to 1.5KM and depositing where directed., complete all as specified and directed. |
| 174 | Removing excavated material exeeeding1.5 KM but not exceeding to 5KM and depositing where directed., complete all as specified and directed. |
| 175 | Supply and plantation of lawn grass / Doob grass (Cynodon dactylon / Bermuda turf) incl watering and maintenance. (Note in case any grass, Plant dies the same plant of equal growth be replaced by the contractor without any extra cost )Note: (a) Plowing of whole site in soft /ordniary soil up to the depth of 20 cm and removing all the unwanted material such as stores, weeds, trees root etc which are not suitable for healthy growth of grass.(b) Dressing and leveling the soil (A) MANUREOld Cow Dung or Okhla sludge at the rate of 2.25 cubic feet for 10 Sam (B) FERTILIZERS(i) Neem Khali at the rate of 2 Kg of 10 Sqm (ii) Bonemeal at the rate of 1 kg for 10 Sqm(iii) DA (16.42) at the rate of 0.15 kg for 10 Sqm(iv) BHC dust 10% or Pin dance dust at the rate of 0.15 Kg for 10 Sqm (v) Weedicide at the rate of 0.01 (Note: The manure and fertilizers to be mixed evenly up to maximum depth of 15 cm) (c) Fine dressing of top soil after mixing the manure and fertilizers to a require slope.(d) Watering the area after fine dressing of soil after one week continuously still the soil get water upto 10 to 15 cm deep (e) Final dressing of top surface of soil to required slope and gradient towards the manholes. |
| 176 | Supply and planting of following shade plants including watering and maintenance Note:- Plant should be between 60 cm to 90 cm long at the time of planting and in case any plant dies the same plant of equal growth be replaced by the contractor without any extra cost all as specifications/directed by Engr-in-Charge. |
| 177 | Golden chain (Labranum anagyroides) |
| 178 | Maple tree (Acer Japonicum) |
| 179 | Tulip Tree (Magnolia Liliflora) |
| 180 | Chinar Tree (Platanus Orientails) |
| 181 | Himchampa Tree (Magnolia Grandiflora) |
| 182 | Flowering Peach (Prunus Persica) |
| 183 | Ornamental plum (Prunus Cerasifera) |
| 184 | Supply and planting of following shade plants including watering and maintenance (note: Plant should be between 60 cm to 90 cm long at the time of planting and in case any plant dies the same plant of equal growth be replaced by the contractor without any extra cost all as specifications/directed by Engr-in-Charge. |
| 185 | Forsythia (Forsythia x intermedia) |
| 186 | Abelia (Abelia grandiflora) |
| 187 | Hydrangea (Hydrangea macrophylla) |
| 188 | Spirea |
| 189 | Supply and planting of following shade plants including watering and maintenance (note: Plant should be between 60 cm to 90 cm long at the time of planting and in case any plant dies the same plant of equal growth be replaced by the contractor without any extra cost all as specifications/directed by Engr-in-Charge. |
| 190 | Lavender (Lavendulla officinalis) |
| 191 | Thyme (Thyme serohvllum) |
| 192 | Golden Cypress (Xanthocyparis spp) |
| 193 | Italian Cypress (Cypressus semprevirens) |
| 194 | MANGOLIYA LILIFLORA |
| 195 | Supply and planting Hedges as directed by Engr-in-charge Note : - (a) Ploughing of whole site in soft/ordniary soil upto the depth of 30-40cm and removing all the unwanted material such as stores, weads,, trees root etc which are not suitable for healthy growth of grass.(b) Dressing and levelling the soil (A) MANUREOld Cow Dung or Okhla sludge at the rate of 2.25 cubic feet for 10 Sam (B) FERTILIZERS(i) Neem Khali at the rate of 2 Kg of 10 Sqm (ii) Bonemeal at the rate of 1 kg for 10 Sqm(iii) DA (16.42) at the rate of 0.15 kg for 10 Sqm(iv) BHC dust 10% or Pin dance dust at the rate of 0.15 Kg for 10 Sqm (v) Weedicide at the rate of 0.01 (Note: The manure and fertilizers to be mixed evenly up to maximum depth of 15 cm) (c) Fine dressing of top soil after mixing the manure and fertilizers to a require slope.(d) Watering the area after fine dressing of soil after one week continuously still the soil get water upto 10 to 15 cm deep (e) Final dressing of top surface of soil to required slope and gradient towards the manholes. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
