Tender For Construction Of Material Recovery Facility Shed (Mrf) At Fatorpa In Village Panchayat Fatorpa-Quital In Sy.No. 43/2, South Goa-Goa

Construction Of Material Recovery Facility Shed ( Mrf ) At Fatorpa In Village Panchayat Fatorpa-Quital In Sy.No. 43 / 2-Earthwork In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Pipeline Trenches Drain ( Not Exceeding 1.5 M In Widthor 10 Sq.M. On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directedwithin A Lead Of 50 M. 2 A ) All Kinds Of Soil 3 Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. 4 Providing & Laying Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggrt. 20 Mm. Nominal Size ) Excluding Cost Of Centering, Shuttering And Finishing In: 5 A ) All Works Upto Plinth Level 6 Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 ( 1 Cement :4 Coarse Sand ) In Foundation And Basement 7 Refilling The Pipeline / Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directe 8 Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 ( 1 Cement :4 Coarse Sand ) In Foundation And Basement. + Extra For Laterite Masonary In All Sizes In Superstructure From Floor I Level Upto Floor V Level 9 Providing And Laying In Position ( 1:11 / 2:3 ) Reinforced Cement Conrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinfrocement ( 1 Cement: 1½ Coarse Sand:3 Graded Stone Agg 20Mm Nominal Size ) 10 A ) All Works Upto Plinth Level 11 C ) In Beams Suspende Floors, Roots Having Slope Upto 15 12 Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : 13 I ) Foundations, Footings, Bases For Columns 14 Iv ) Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth 15 Providing Tmt Steel Reinforcement Bars Of ( Sail, Tata, Vizag, Jsw Steel Ltd ) ( Conforming To I.S 1786 Of 1986 ) For Rcc Work ( Conforming To I.S 1786 Of 1986 ) Including Bending, Binding And Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocksof Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. 16 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) ( Square Hollow Section ( Shs ) Is4923 / Circular Hollow Section ( Chs ) Is1161 Closed Structural Steel Of ( Sail, Tata, Vizag, Jsw, Apollo Steel Ltd ) Make ( Min Yield Stress 310 Mpa ) ) Trusses Etc, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc.Complete 17 A ) Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories ( Tata Make ) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. 18 C ) Add For Providing Andfixing Flashings- [ Corners, Ridges, Valleys, Gable End And Trims ] ( Girth Upto 610 Mm ) Including All The Accessories Of The Engineer In Charge. 19 Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc With M.S. Flats Square Or Round Bars And Nuts Or By Screws 20 A ) Plain Grills 21 Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates ( 2004 ) Vol And Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Single Or Double Leaf Door Shutters. 22 A ) Acrylic Sheet 23 Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates ( 2004 ) Vol And Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Fixed Partitions 24 A ) Acrylic Sheet 25 25 Mm Cement Concrete Flooring 1:2:4 ( 1Cement:2Coarsesand:4Graded Sstone Aggregate 12.5 Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement. 26 12Mm Cement Plaster 1:4 ( 1 Cement : 4 Fine Sand ) 27 18Mmcement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement:5 Coarsesand ) And Top Layer 6Mm Thick With Cement Plaster 1:3 ( 1 Cement:3 Coarsesand ) Finished With Sponge. 28 Painting Three Or More Coats With Acrylic Exterior Paint Of Approved Brand And Manufacture ( Such As Dulex / Asian Paints / Sherwin Willians ) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. 29 Painting Two Or More Coats ( Excluding Priming Coat ) With Superior Quality Ready Mixed Paint For Steel Work Of Approved Brand & Manufacture In All Shades On New Work To Give An Even Shade. 30 Proving And Fixing Prefabricatedcompound Gate Of G.I Pipes 40-50Mm Dia ( Medium ) With 12Mm M.S.Square Bars Og G.I. Pipes Grill Work As Per Drawing Including Providing And Fixing Locking Arrangements, Pintals, Hold Fast Embedded In Cement Concrete 1:2:4 ( 1Cement:2Coarsesand:4Granitic Or Basaltic Aggreate 20Mm Nominal Size ) Including Applying Priming Coat With Ready Mixed Red Lead Paint And Painting 1 Or More Coats With Superior Ready Mixed Paint Of Approved Brand And Manufacture In All Shades As Per Direction Complete 31 Supplying And Fixing Rolling Shutters Of Approved Make , Made Of 80X1.25 Mm M.S Laths Interlocked Together Through Their Entire Lenghth And Joined Together At The End By End Locks Mounted On Specially Designed Pipe Shaft With Brackets, Side Huides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Grade No. 2 And M.S. Top Cover Of 1.25 Mm Thick For Folling Shutterstop Cover And Spring 32 Chequered Terrazo Tiles 22 Mm Thick With Marble Chips Of Sizes Upto 6Mm In Floor On 25 Mm Thick Bed Of Lime Mortar 1:1:1 ( 1 Lime Putty:1 Surkhi: 1 Coarse Sand ) Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Including Rubbing And Polishing Completed. 33 ( C ) Dark Shade Using Ordinary Cement

INR 3000 /-

INR 30716.0 /-

INR 15.35 Lakhs /-

Name of Work: Construction of material Recovery Facility shed (MRF) at Fatorpa in Village Panchayat Fatorpa-Quital in Sy.No. 43/2

Sl. No.	Item Description
1	Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m.
2	a)All kinds of soil
3	Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
4	Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:
5	a) All works upto plinth level
6	Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement :4 coarse sand)in foundation and basement
7	Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directe
8	Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement :4 coarse sand)in foundation and basement. + Extra for laterite masonary in all sizes in superstructure from floor I level upto floor V level
9	Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)
10	a)All works upto plinth level
11	c)in beams suspende floors,roots having slope upto 15
12	Centering & shuttering including Strutting, Propping & removal of forms for :
13	i)Foundations, Footings, Bases for columns
14	iv) sides and soffits of beams, Beam Haunchings, Cantilever,Girders Bressumers and Lintels plinth beams not exceeding 1m in depth
15	Providing TMT steel reinforcement bars of (SAIL,TATA,VIZAG,JSW Steel Ltd )(Conforming to I.S 1786 of 1986) for RCC work (conforming to I.S 1786 of 1986) including bending,binding and placing in position in all the floors along with the factory made precast concrete cover blocksof specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
16	Steel work in built up tubular (round,square or rectangular hollow tubes etc.)(Square Hollow Section (SHS) IS4923/ Circular Hollow Section(CHS) IS1161 closed Structural Steel of (SAIL,TATA,VIZAG,JSW,APOLLO Steel Ltd) make (Min Yield Stress 310 Mpa)) trusses etc, including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc.complete
17	a)Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
18	c) Add for providing andfixing Flashings-[Corners,Ridges,valleys,gable end and Trims] (Girth upto 610 mm) including all the accessories of the Engineer in charge.
19	Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc with M.S. flats square or round bars and nuts or by screws
20	a)Plain grills
21	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol and II including all taxes,transportation,scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters.
22	a) Acrylic sheet
23	Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol and II including all taxes,transportation,scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed Partitions
24	a) Acrylic sheet
25	25 mm cement concrete flooring 1:2:4 ( 1cement:2coarsesand:4graded sstone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
26	12mm cement plaster 1:4 (1 cement : 4 fine sand)
27	18mmcement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement:5 coarsesand) and top layer 6mm thick with cement plaster 1:3 (1 cement:3 coarsesand) finished with sponge.
28	Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as Dulex/Asian paints/Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. Complete.
29	Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
30	Proving and fixing prefabricatedcompound gate of G.I pipes 40-50mm dia(medium) with 12mm M.S.square bars og G.I. pipes grill work as per drawing including providing and fixing locking arrangements,pintals,hold fast embedded in cement concrete 1:2:4(1cement:2coarsesand:4granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 1 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete
31	Supplying and fixing rolling shutters of approved make , made of 80x1.25 mm M.S laths interlocked together through their entire lenghth and joined together at the end by end locks mounted on specially designed pipe shaft with brackets, side huides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No. 2 and M.S. top cover of 1.25 mm thick for folling shutterstop cover and spring
32	Chequered terrazo tiles 22 mm thick with marble chips of sizes upto 6mm in floor on 25 mm thick bed of lime mortar 1:1:1 (1 lime putty:1 surkhi: 1 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing completed.
33	( C ) Dark shade using ordinary cement