Orissa Tourism Development Corporation Limited has published Tender For Renovation Of Panthanivas Sambalpur-Trc Block. Submission Date for this Tender is 16-10-2023. Building Work Tenders in sambalpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Deluxe Rooms |
| 2 | Dismantling of Existing wall and floor tile with tile Plaster/ Existing Brick work dismantling/ Room & toilet false ceiling/ Electrical wire with chesing wall & conduit, Switch, Socket and electrical box, lighting, A.C and other fixture/ existing plumbing fitting with dismantling of pipes and fixture/ Door & Window/ Existing all Furniture like Bed, sofa, Table, chairs, storage etc.. and removing of malwa . |
| 3 | Brick work with K.B. bricks 23cm x 11cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in superstructure. |
| 4 | Brick work with K.B. bricks 23cm x 11cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in Superstructure. |
| 5 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 6 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 7 | Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floorsusing Portland Slag Cement(PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 8 | Providing and fixing Wooden finish vitrified tile flooring using vitrified tiles of premium grade(of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 9 | Supplying, fitting and fixing of vitrified tiles in skirting of premium grade (of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent)having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. |
| 10 | Providing 30cmx30cm sizespecial plain/ printed series ceramic floor tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. |
| 11 | Supplying and laying 18 mm thk machine cut & machine polished Granite door frame on toilet area a prefinished surface with 1:3 cement sand mortar.Rate shall be inclusive of machine polishingedges and four side edge chamfering in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area . |
| 12 | Supplying and laying 18 mm thk machine cut & machine polished Granite sill and Dado , on door and window a prefinished surface with 1:3 cement sand mortar.Rate shall be inclusive of machine polishingedges in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area . |
| 13 | Providing & fixing 550mm deep Wash basin counter made out ofMS Frame with 10mm thik V Board and 18mm thk black granite . |
| 14 | Providing 30cmx45cm/30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 15 | Providing 30cmx30cm sizespecial plain/ printed series ceramic floor tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. |
| 16 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 17 | Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, with application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water inratio of 1:475, as per detailed specifications given in Indian Railways Standard Specifications, so as to create a chemical barrier below and around the structure by an approved agency. (Plinth Area/Basement floor area shall be considered for Payment) |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 19 | Providing & fixing 30mm thk flush door with 1 1/2" X 1/4" lipping patti on all sides, 4mm thk veneer on both sides and finished in 2 coats Melamine Polishing of approved shadeas per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges ) |
| 20 | Providing & fixing 30mm thk flush door with 1 1/2" X 1/4" lipping patti on one sides, 4mm thk veneer finished in 2 coats Melamine Polishing on other sides 1mm thick laminate finished of approved shade andof approved shadeas per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges ) |
| 21 | Providing and fixing factory made UPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | Providing & fixing pelmet 6" x 6" in 19mm commercial ply finishedwith white enamel paint as per instructions by Architect , the edge of 19 mm ply to be finished with lipping patti 3/4"x1/4" finished with matching polish with 3 coats of melamine. Note : (i) All ply to be sprayed with anti termite & anti borere spray (ii) Rates to include all necessary supports & as per details. |
| 24 | Providing & fixing wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 8 mm Thk V board fixing and 8mm SDMR Board fixing on V board with 4mm thk veneer fixing and finished in 2 coats of Melemine Polishing of approved shadeas per drawing andarchitecs instructions. complete |
| 25 | Providing and fixing bed backdrobe wall. Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall.This framing would be covered by 10mm thk. V board and 8mm thick V-board with grove fixingwith necessary screws and finished with texture paint. as directed by the architect shall be provided wherever required. |
| 26 | Providing and fixing in King Size Bed. (2030X1850x325) in Deluxe room etc. complete in all respects as per detail drawing & instructions of architect.(make-Green/Mayur/Century/Sylven) |
| 27 | Providing and fixing in Bed Side Table.(400x450x400) side table in Deluxe room etc. complete in all respects as per detail drawing & instructions of architect.(make-Green/Mayur/Century/Sylven) |
| 28 | Providing and fixing in position wardrobe(825X550X2100) 600mm deep with shutters out of 18 mm thk. BWP ply & shelves out of 18mm BWP ply at appropriate locations with necessary support buttons. The storage to be finished externally with 4 mm thk veener of approved shade & internaly finished in0.8mm laminate with SS hinges, tower bolts, ballcatches lock, Handle (8" SS handle) etc. complete in all respects as per detail drawing & instructions of architect.(make-Green/Mayur/Century/Sylven) |
| 29 | Providing and fixing in LCD wall panal (1650X125X1950) out of 18mm thk BWP plywith 4mm thk veener and tek wood moulding finish with polish complete in all respects as per detail drawing & instructions of architect. |
| 30 | Providing and fixing in writing table out of 18mm thk BWP plywith 4mm thk veener and tek wood moulding finish with polish complete in all respects as per detail drawing & instructions of architect.(make-Green/Mayur/Century/Sylven) |
| 31 | Providing and fixing in study chair out of wooden base frame chair with seat and back fully upholstery. complete in all respects as per detail drawing & instructions of architect. |
| 32 | Providing and fixing in luggage rack(900x550x650) out of 18mm thk BWP ply with 4mm thk veener finish with polish complete in all respects as per detail drawing & instructions of architect.(make-Green/Mayur/Century) |
| 33 | Providing and fixing in washbasin vanity cabinat(900X520X700) out of 18mm thk WPC ply with 1mm thk high gloss laminate finish complete in all respects as per detail drawing & instructions of architect. |
| 34 | Providing and fixing Mirror (600x1550) of superior glassmounted on 6mm thick A.C sheet or plywood sheet and fixed to woodenplugs with CP screws and washers. |
| 35 | Providing and fixing of mini bar(900X550X1150) 19mm BWP ply all sides and one drawer and lower in door finished 1mm thick laminate inside and outside 4mm thick veneer with finished in melemine polish and top & 3 sides finished in 18mm thick granite with polishing and moulding, chipping etc. with necessary fitting of hinges, drawer channel etc.. as per specification and direction of Engineer-in-Charge. |
| 36 | Outdoor Chair etc complete in all respects as per detail drawing & instructions of architect. |
| 37 | Outdoor Table etc complete in all respects as per detail drawing & instructions of architect. |
| 38 | Providing, fitting & fixing Curtains : Supplying of Curtain Fabrics Model & Qualityincluding stitching & installation at site with the Fabric as per approved quality / shade / design including Ringlet type of stitching with best quality.all complete, including all cost of labour,material, conveyance, T&P etc.as per direction of Engineer-in-charge. |
| 39 | Supply and install high quality cloth sheer height upto 270 cm, the price includes supplying and installing tiebacks of the same type of the sheer" according to specification and engineer instructions. |
| 40 | A&F Rod DecorAluminIum Curtain Track Kit (White) |
| 41 | Providing and laying high quality rugs used for interior decorative of approved design as per direction of architects. |
| 42 | Door mats( Heavy quality size 100 cm x 50 cm ) |
| 43 | Providing and laying high quality cusions used for interior decorative of approved design as per direction of architects. |
| 44 | Providing and laying high quality cusions cover used for interior decorative of approved design as per direction of architects. |
| 45 | TableAMP- Model: Wall mounted Chromeapproved design as per direction of architects. |
| 46 | TableAMP- Model: Wall mounted Chromeapproved design as per direction of architects. |
| 47 | Squire wall mounterpaper towel holder. |
| 48 | Providing supplying pen stand as per approved design as per direction of architects. |
| 49 | Providing supplying Wooden tray with handle as per approved design as per direction of architects. |
| 50 | Providing supplying flower vase as per approved design as per direction of architects. |
| 51 | Providing supplyingKing Size Bed MATTRESS (72" x 78" x 8" ) with bed linenas per approved design as per direction of architects.etc complete in all respects as per detail drawing & instructions of architect.(Make Kurlon/Sleep well) |
| 52 | Providing supplying white colour pillow coveras per approved design as per direction of architects.(Make Kurlon/Sleep well) |
| 53 | Providing supplying Bed sheet for King bed (white colour and size 274 cm x 215 cm)as per approved design as per direction of architects.(Make: Protico/Bombay deying) |
| 54 | Providing supplying Wooden hanger royalty free vector image as per approved design as per direction of architects. |
| 55 | Providing & supplying of Wall Paintings/artifectsas per approved design as per direction of architects. |
| 56 | Providing supplying COI Note Pad as per approved design as per direction of architects. |
| 57 | Providing & supplying of HAND TOWELS- SMALL SIZE( white ) of approved make as per approved design as per direction of architects. |
| 58 | Providing & supplying of BATH TOWELS- BIG SIZE( white ) of approved make as per approved design as per direction of architects. |
| 59 | Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2"-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2"-0"x2"-0" suspended from ceiling etc complete.(Gypsum Board) |
| 60 | Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. |
| 61 | Providing and fixing in position Gypsum Board coves to provide floating effect and provision for indirect lighting between two layers of gypsum False Ceiling as per manufacturer"sspecifications and instructions with 12.5 mm thick `Gypboard" Screw-fixed to oneside Of suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer"s instructions and as per specifications using Original Co. Specified Framework SectionsG.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws.The `Gypboard " to be used should be 12.5mm thick tapered edge boards.The boards should Be taped and filled from underside to givesmooth, seamless ceiling. The rate should include necessary additionalceiling sections and intermediate channels. Additional Intermediatechannels should be fixed to strap hangers foradditional support to prevent strap hangers frombuckling/swaying at every 1200 mm. and width ranging from 6" to 12" to be considered 12" only for calculation purpose. |
| 62 | Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls andcolumns to bring the surface in plumb line andlevel.Item to be completed in all respectsincluding scrappingof existing neeru surface, cleaning etc. as per instructions. |
| 63 | Providing and applying desired paint plastic Emulsion finish to ceiling,of approved shade.. The surface of ceiling to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint. |
| 64 | Providing and applying desired paint luster finish to walls,of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint. |
| 65 | Providing and fixing first quality wall hung European Water closet with PP soft close seat cover ofincluding matching concealed flushing system, connection pipe and chair bracket.All complete as per design and specifications. [Wall hung WC Jaquar model No. CNS-WHT-959SPP] & [Single piece consealed flushing cistern Jaquar model No. CS-WHT-2400] |
| 66 | Providing and fixing under countertop Wash Basin of oval shape all required to complete the work and make it functional. All complete as per design and specifications. [Jaquar model No. JDS-WHT-25909] |
| 67 | Providing and fixing inpositionbestIndian make Mirror , made out of approx. 5.5 mm.thick float mirror glassfixedwith12 mm. thickPlywood andBrassC. P. screws,Teak wood moulding all around etc., complete. |
| 68 | Providing and fixing CP Brass over Head Shower 120mm dia round shape of approved quality & make and as per the direction of Engineer-in-charge.(Jaquar model No. OHS-CHR-1789) |
| 69 | Providing and fixing CP Brass concealed body for single lever diverter with cover of approved quality & make and as per the direction of Engineer-in-charge. make(Jaquar model No. ALD-CHR-065N, Jaquar model No. OPP-CHR-15065NKPM ) |
| 70 | Providing and fixing rods of size 25mm dia of stainless steel body with cover, with shower Curtains including necessary fittings as per direction of Engineer-in-charge. |
| 71 | Supply & fixing of Nahani trap with Stainless Steel jali. |
| 72 | Supply fixing and installation of Concealed stop cocks (to be provided only at the entry point of plumbing lines within the toilets / pantry. [Jaquar model No. AQT-CHR-3057] |
| 73 | Installation, testing and commissioning toilet paper holder including cutting and making good the walls. [Jaquar model No. ACN-CHR-1151N] |
| 74 | Providing and fixing CP Brass OPAL PRIME BATH TUB SPOUTof approved quality & make and as per the direction of Engineer-in-charge. make(Jaquar model No.SPJ-CHR-15429PM) |
| 75 | Installation, testing and commissioning ABS health faucet unit comprising of CP flxible hose, spary, wall flange etc. complete of make (Jaquar model No. ALD-CHR-573) |
| 76 | Providing and fixing in positionBrassC. P. towel ring,round With round flange of approved make (Jaquar model No.ACN-1121BN) |
| 77 | Providing and fixing in positionBrassC. P. TOWEL RACK 600MM. LONG WITH LOWER HANGERS With Brass C.P.brackets, of approvedof make (Jaquar model No. CAN-CHR-1181S). |
| 78 | Providing and fixing CP Brass single lever basin mixer TALL boy with 150mm extension of quality & make(Jaquar model No. OOP-CHR-15005BPM] |
| 79 | Providing and fixing in positionBrassC. P. waste coupling 32mm F thread 130mm height of approved make. [Jaquar model No. ALD-705L130] |
| 80 | Providing and fixing in position of 10 litres LGyser of approved quality & make and as per the direction of Engineer-in-charge. [Jaquar/ Havells ]. |
| 81 | DOUBLE HOOK in Toilet make(Jaquar model No.CAN-CHR-1161N) |
| 82 | Providing and fixing 32mm size Flexible pipe of approved quality & make as per the direction of Engineer-in-charge. |
| 83 | Providing and fixing in position Upvc of various sized for drainage and Water supply system of toilet and wash including necessary fitting and accessories etc complte as per requirment of site and tsting and commissioning etc complte as per detail drawing & instructions of architect. |
| 84 | Providing and fixingin positionsoap dispenser with push button of approved size,fixedwith Brass C.P. screws and rawl plugs complete.of approvedof make |
| 85 | Providing and fixingin positiondouble soap dispenser liquid with push button of approved size,fixedwith Brass C.P. screws and rawl plugs complete.of approvedof make |
| 86 | Lobby |
| 87 | Dismantling of Existing wall and floor tile with tile Plaster/ Existing Brick work dismantling/ Room & toilet false ceiling/ Electrical wire with chesing wall & conduit, Switch, Socket and electrical box, lighting, A.C and other fixture/ existing plumbing fitting with dismantling of pipes and fixture/ Door & Window/ Existing all Furniture like Bed, sofa, Table, chairs, storage etc.. and removing of malwa . |
| 88 | Brick work with K.B. bricks 23cm x 11cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in superstructure. |
| 89 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 90 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 91 | Providing vitrified tile flooring using vitrified tiles of premium grade(of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 92 | Supplying, fitting and fixing of wooden finish vitrified tiles in wall of premium grade (of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent)having thickness of 8mm to 10mm conforming to IS 13756 of coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. |
| 93 | Providing and laying Polish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with cement slurry and pointing withwhitecement slurry admixed with pigment of matching shade including rubbing,curingand polishing etc. all complete as specified and as directed by the Engineerin-Charge : |
| 94 | Providingandfixingmachinecut,mirror polished granite stone work for dado, skirting etc., of approved shade & in required design and pattern wherever required, stones of different finished surface texture, on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid andjointed with white cement slurry @ 3.3 Kg/Sqm including pointing with white cement slurry admixed with pigment of matchingshade, including rubbing, curing etc. all complete as per architectural drawings, and as directedbytheEngineer-in-Charge. |
| 95 | Providingandfixing18mmthickand45mm wide U shaped moulding mirror polished machine cut granite stone of approved nosing with expoxy based adhessive i/c machine polisihing and high gloss finish to the projected edge of nosing complete and as per direction of Engineer- in-Charge |
| 96 | Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, with application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water inratio of 1:475, as per detailed specifications given in Indian Railways Standard Specifications, so as to create a chemical barrier below and around the structure by an approved agency. (Plinth Area/Basement floor area shall be considered for Payment) |
| 97 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 98 | Supplying and laying 18 mm thk machine cut & machine polished Granite door frame on toilet area a prefinished surface with 1:3 cement sand mortar.Rate shall be inclusive of machine polishingedges and four side edge chamfering in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area . |
| 99 | Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxygrout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), instead with white cement and matching pigment in the item of fixing of vitrifed tiles including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 1200x200 mm |
| 100 | Providing & fixing glass door made out of12mm thick Toughenedglass with Top / bottom patch fitting withallnecessary hardware as approved by architect (Cost to include cost of Handle, lock, floor spring ) |
| 101 | Providing and fixing factory made UPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 102 | Providing & fixing reception table(6 x2x 2.5) 19mm BWP plyfinished in 1mm thick laminate of approved shade with 38 mm thk flat moulding completeas per drawing with one pedestal drawer unit consisiting of 2 drawers & 1 filing drawer all finished in laminate of 0.8mm thickness of approved shade and all internal surfaces in french polish with all necessary hardware such as hinges, locks, S.S. Handle, wire manager etc. complete. |
| 103 | Low Back Chair with Adjustable Back & Seat,Fixed armrest,Gas Lift for HeightAdjustment, Nylon Base with Castors. Chair should be upholstered in fabric of approved shade and colour. Make:Geeken |
| 104 | Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2"-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2"-0"x2"-0" suspended from ceiling etc complete.(Gypsum Board) |
| 105 | Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls andcolumns to bring the surface in plumb line andlevel.Item to be completed in all respectsincluding scrappingof existing neeru surface, cleaning etc. as per instructions. |
| 106 | Providing and applying desired paint plastic Emulsion finish to walls,of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint. |
| 107 | Textured superfine paint shall be applied after preparing the surface to get the antique finish. The paint shall be applied using texture roller to give a uniform roller texture finish with two coats different colours of acrylic emulsion paint.The texture paint used shall be of spectrum make. |
| 108 | MISCELLANEOUS WORK. |
| 109 | Room Signage |
| 110 | Display area for brouchures/ Art Effects |
| 111 | Conference Hall |
| 112 | Dismantling of Existing wall and floor tile with tile Plaster/ Existing Brick work dismantling/ restaurant false ceiling/ Electrical wire with chesing wall & conduit, Switch, Socket and electrical box, lighting, and other fixture/ existingDoor & Window/ Existing all Furniture etc.. and removing of malwa . |
| 113 | Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before useincluding splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. in superstructure. |
| 114 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 115 | R.C.C. work ofM-25having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 116 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 117 | Providing andlayingglazed vitrifiedfloor tiles( Kajaria) mett finish in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, ofapproved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointingwith grey cement slurry @ 3.3Kg/Sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 118 | Providing wood work frames (55mmX110mm) of door window clearstory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia &length. |
| 119 | Teakwood Chokhat finish with melamine polish |
| 120 | Providing & fixing 30mm thk flush door (Brand - Green Aptima) with 1 1/2" X 1/4" lipping patti on all sides, 4mm thick MDF both Side and finished in 2 coats Deco paint(Brand - Burger) of approved shadeas per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges ) |
| 121 | Providing and fixing factory made UPVC (Brand -Vista) white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 122 | Providing & fixing of Designer laminate Wall wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 8mm thick bison board with9 mm Thk BWP Ply Board with 1mm thik laminate(Century) finish of approved shadeas per architects instructions. complete |
| 123 | Providing & fixing of Fabric Paneling with acostic Board wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 9 mm Thk BWP Ply Board with acostic board on ply finishing with febric of approved shade as per architects instructions. complete |
| 124 | Providing and fixing in Podium complete in all respects as per detail drawing & instructions of architect. |
| 125 | Providing and fixing in chair out of wooden base frame chair with seat and back fully upholstery. complete in all respects as per detail drawing & instructions of architect. |
| 126 | Providing and fixing stage table 40mm thick table top out of 18mm thk BWP ply with 1mm thk laminte finish and MS base finish with powder coated complete in all respects as per detail drawing & instructions of architect. |
| 127 | Providing and fixing in position Gypsum Board False Ceiling as per manufacturer"sspecifications and instructions with 12.5 mm thick `Gypboard" Screw-fixed to the undersideOf suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer"s instructions and as per specifications using Original Co. Specified Framework SectionsG.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws.The `Gypboard " to be used should be 12.5mm thick tapered edge boards.The boards should Be taped and filled from underside to givesmooth, seamless ceiling. The rate should include necessary additionalceiling sections and intermediate channelsopenings for light fixtures, A.C. ducts, verticaldrops, offsets. etc. Additional Intermediatechannels should be fixed to strap hangers foradditional support to prevent strap hangers frombuckling/swaying at every 1200 mm. Item to be completed in all respect including necessarysleeves for ducts finishing of joints cut outs supports for A.C. grills, light fixtures, speakers etc. |
| 128 | Providing and fixing in position Gypsum Board coves to provide floating effect and provision for indirect lighting between two layers of gypsum False Ceiling as per manufacturer"sspecifications and instructions with 12.5 mm thick `Gypboard" Screw-fixed to oneside Of suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer"s instructions and as per specifications using Original Co. Specified Framework SectionsG.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws.The `Gypboard " to be used should be 12.5mm thick tapered edge boards.The boards should Be taped and filled from underside to givesmooth, seamless ceiling. The rate should include necessary additionalceiling sections and intermediate channels. Additional Intermediatechannels should be fixed to strap hangers foradditional support to prevent strap hangers frombuckling/swaying at every 1200 mm. and width ranging from 6" to 12" to be considered 12" only for calculation purpose. |
| 129 | Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls andcolumns to bring the surface in plumb line andlevel.Item to be completed in all respectsincluding scrappingof existing neeru surface, cleaning etc. as per instructions. |
| 130 | Providing and applying desired paint plastic Emulsion finish to walls,of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint.(Brand - Burger) |
| 131 | Providing, fitting & fixing Blinds : Supplying of blinds Model & Qualityincluding stitching & installation at site with the Fabric as per approved quality / shade / design including Ringlet type of stitching with best quality.all complete, including all cost of labour,material, conveyance, T&P etc.as per direction of Engineer-in-charge |
| 132 | Providing and fixing in position roller blinds of approved make with acmeda or equivalent fitting, with screen fabric for roller blinds, glass yarn coated with PVC on both sides, basket weave, fire rating classification M1 thickness 0.45 mm, weight 360 gm with openness factor of 10%. |
| 133 | Water proofing |
| 134 | Grinding and cleaning the concrete surface by using mechanical Tools, wire brush, T&P with all safety equipment and necessary arrengements of scaffolding to reach the required height to make the surface clean and free of foreign material and contaminants including water jet cleaning etc. with all leads and lifts as directed by the engineer in charge. |
| 135 | Providing and applying Xypex Concrete crystalline based waterproofing coating and durability enhancement by crystallization to be supported by at least two national / international test reports showing clear scaning electron microscopic (SEM) photographs of densified and mature crystals formation to plug all the capillary tracks and pores of the concrete permanently and permiability tested as per IS-2720 conducted by CBRI the concrete should not absorbed water more than 1.5 gms and more than 1mm from the concrete surface. The product to be listed in ICC-ES evaluation report index January 2009, 2010 and 2011. The treatment to be carried out on the cleaned concrete surface as per manufacture"s specification/ data sheet. The application to be carried out with brush in one coat @0.80 Kg/ Coat by using all safety equipment and necessary arrengments of scaffolding to reach the required height as directed by the engineer in charge. |
| 136 | Electrical works |
| 137 | Recessed Wiring to light/ Fan/ Exhaust Fan/ Call bell point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no 6Amp.1way plate type Modular switch, (Polycarbonate)and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. |
| 138 | Group -A |
| 139 | Group -B |
| 140 | Group -C |
| 141 | Secondary Point |
| 142 | Recessed Wiring to light/ Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp. 2 way plate type Modular switch, (Polycarbonate)and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. |
| 143 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard/RR ) |
| 144 | Supply and fixing of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. |
| 145 | Supply and fixing of 6A modular switch & socket outlet complete with 2 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 2 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havells / Legrand ) |
| 146 | Supply and fixing of 16A modular switch & socket outlet complete with 1 no of240 volt 16 amp 5 pin universal round/flat pin combined shuttered socket outlet &240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc.as required. as per the direction of Engineer-in-Charge.( |
| 147 | Supplying and fixing of metal box of 32A D.P modular switch on surface or inrecess with 2 Madular metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge. |
| 148 | Supplying and fixing of metal box of 20A modular socket on surface or inrecess with 2 Madular metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge. |
| 149 | Supply and fixing of capacitor switching circuit,works at 120 to 280 volts,Heavy duty, Noiseless 100W step type Fan regulator complete with all other necessary materials & labour. |
| 150 | Supply and fixing ofTV antennaSocket outlet completelyproviding 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size includingPVC bend, saddle, elbow, etc. & other necessary materials &labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand ) |
| 151 | Supply and fixing of Telephone point completelyproviding1 no.of telephone socket & Top, Metal plate made of polycarbonate moulded casemetal box with metal plate of adequate size including PVC bend, saddle, elbow etc and othernecessary materials & labour complete as per the direction of Engineer-in-Charge.complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand ) |
| 152 | Sub-main wiringin20/25/32mm dia. good quality ISI mark PVC Conduit withfollowing sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. |
| 153 | (2 x 1.5 + 1 x 1.5) sq.mm copper wire |
| 154 | (2 x 2.5 + 1 x 1.5) sq.mm copper wire |
| 155 | (2 x 4 + 1 x 2.5) sq.mm copper wire |
| 156 | (2 x 6 + 1 x 2.5) sq.mm copper wire |
| 157 | (4 x 4 + 1 x 2.5) sq.mm copper wire |
| 158 | (4 x 10 + 1 x 4) sq.mm copper wire |
| 159 | (4 x 16 + 1 x 6) sq.mm copper wire |
| 160 | 0.5 mm 2 pair telephone wire |
| 161 | RJ-6 Coaxial TV wire |
| 162 | 4 pair Cat 6 Lan cable |
| 163 | 20 pair Armourd Jelly fill cable |
| 164 | speaker cable Single pair, 2-core, 1.5 sqmm/mcp and hooter wiring |
| 165 | Supply, Installation, Testing, and commissioning of decorative ceiling fan 900/1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy,rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 166 | Supply, Installation, Testing, and commissioning of ventilating Plastic Body Exhaust fan 150 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 167 | Supply, Installation,Testing & commissioning ofSurface mounting 18 W LED tube light fitting includingluminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 168 | Supply, Installation,Testing & commissioning ofSurface mounting 9 W LED tube light fitting includingluminairs of approved make complete with all materials & labour. |
| 169 | Supply, Installation,Testing & commissioning ofRecessed mounted 3 watt LED spot luminaries suitable for indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 170 | Supply, Installation,Testing & commissioning ofRecessed mountedCeling 9 watt LED luminaries suitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 171 | Supply, Installation,Testing & commissioning ofRecessed mountedCeling 12 watt LED luminaries suitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 172 | Supply, Installation,Testing & commissioning ofRecessed mounted 24 watt2"x2"LED celingluminaries suitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 173 | Supply, Installation,Testing & commissioning ofFlexibleLEDstripwide viewing angle for good light distribution & IP 65 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 174 | Supply, Installation,Testing & commissioning of SPARKLER WL 1LS E27 BRS BL PC Minimalistic design of wall lights without shade in different finish and design in E27 base. Recommended to use with energy saving LED Filament lamp 7.5 Watt of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells LHFHANDBTN1K007/ Jaquar/Klite/Philips) |
| 175 | Supply, Installation,Testing & commissioning of Mirror light Description: 2 LT opal glass with chrome finishing wall lamp, Fixture Height: 60,Lamp: E-14 LED 4W x 2 ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. ( Make - Jaquar KWB-CHR-MB12021172A /Havells /Klite /Phillips/CG/Bajaj) |
| 176 | Supply, Installation,Testing & commissioning of Bed side Lamp Description: 1 LT Opal Glass with Chrome Finishing Wall Lamp Fixture Height: 171Lamp: G-9 LED 4W x 1 ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. ( Make - Jaquar KWB-CHR-MB12021341A /Havells /Klite /Phillips /CG/Bajaj) |
| 177 | Supply, Installation,Testing & commissioning of LED base Footlight of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.( Make - Jaquar /Havells /Klite /Phillips /CG/Bajaj) |
| 178 | Supply, Installation,Testing & commissioning of Number plate light ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 179 | Supply, Installation,Testing & commissioning of Call bell Buzzer ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 180 | Supplying, installation, testing & commissioning of 43" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony) |
| 181 | Supplying, installation, testing & commissioning of 45 Ltr Mini Fridge Refrigerator 3 star rating, single door ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Samsung/ Whirlpool) |
| 182 | AIR CONDITIONING SYSTEM |
| 183 | Supplying, Installation, Testing & Commissioning of Hi-wall 1.5 Ton Split AC of 5 Star Rating ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin) |
| 184 | Supplying, Installation, Testing & Commissioningof 4 Ton Cassate A.C of 3- Star Rating ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Voltas /Bluestar/ Carrier /Daikin) |
| 185 | Supply, Installation, Testing & Commissioning of Refrigerant Copper piping (Suction / Discharge) for proper functioning of Units. Refrigerant Copper Pipe insulated with manufacturer recommended thickness closed cell electrometric Nitrile Rubber interconnecting indoor & outdoor unit of various sizes ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 186 | Supply & Laying of Power & Control Cable 3 Core x 4 Sqmm Copper Cable ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 187 | Supply, Installation, Testing and commissioning of PVC Drain Piping of 50 mm diameterinsulated with 6mm thick superlon insulation ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.. |
| 188 | FIRE FIGHTING SYSTEM AND FIRE DETECTION & ALARM SYSTEM |
| 189 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 190 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 191 | Supply, installation, testing & commissioning of Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip. Hose and wall mounting bracket etc applicable on class B&C fire. B rating 34B, ISI Approved as per IS:2878:2004 (Fireshield) of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. Make - Safepro/Firestone/Safex or Equivalent |
| 192 | Providing and fixing Main Fire Alarm Control Panel - 4 zone with all necessory accesorries ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.. |
| 193 | Telephone,CCTV & Sound System |
| 194 | Supplying, installation, testing & commissioning of 20 Pair Crown MDF box ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.. |
| 195 | Supplying, installation, testing & commissioning of Beetel CLI Telephone Set ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. |
| 196 | Supply and Installation of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af(UL, FCC, CE, BIS certified.).Make- Honeywell/UNV/Hikvision |
| 197 | Supply and Installation of outdoor Bullet IR Network Camera 1/2.7" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG,Triple streams, DC12V & PoE,Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction,Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing, ONVIF, POE IEEE 802.3af, (UL, FCC, CE, BIS certified). Make-Panasonic/ Bosch/Honeywell/UNV |
| 198 | Supply and Installation of 8 CH NVR Support 12MP/8MP / 5MP / 4MP / 3MP / 1080P / 960P IP Adopt standard H.265 high profile compression format, With 4k Video Output, Compression Standard H.265, Network Access Bandwidth 320Mbps, HDD SATA × 8(Upto 10TB Supported), 1- e-SATA And 2-way Audio RCA × 1, Local Output RCA × 1, USB 2.0 × 2 (one in the front panel and the other in the rear panel), USB 3.0 × 1 (rear panel) (UL, FCC, CE, BIS certified).32TB(4TBx4nos) Storage Capacity, Make: Segate/WDMake- Honeywell/UNV/Hikvision |
| 199 | Supply, installation, testing and commissioning of43” Ultra HD Display, Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1, 100-240V, 50/60Hz, Interfaces: HDMI-2 or more, DP,Audio, USB 2.0,RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC] with internal memory 50 MB or higher, Temperature Sensor, Auto Brightness Sensor, ISM Method, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, os, Smart Energy Saving- 70W or more, Industrial grade Certification- UL / cUL / CB / TUV / KC , FCC / CE / KCC, Warranty-3 years complete as required & as per Direction of Engineer-In-Charge. Make : Samsung/ LG /SONY |
| 200 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker of JBL complete ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 201 | Supplying, installation, testing & commissioning of Amplifier ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 202 | Supplying, installation, testing & commissioning of Cord less Microphone ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 203 | Supplying, installation, testing & commissioning of Wi-Fi celing router ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 204 | Supplying, installation, testing & commissioning of TV projector (VIVITECK)ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 205 | Supplying, installation, testing & commissioning of Screen (Liberty) ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Char |
| 206 | Earthing, Distribution Board, Panel Board & Cable |
| 207 | Supplying, Installation, Testing & Commissioning of 2 meter long Electrode chemical earthing with 58 mm G.I galvanized electrode and 25 x 3mm G.I inner strip with 50x 6 mm copper connecting terminal with 2 bag of BFC (50Kg) of chemical earthing size of chemical earth bar 2 mtr size of earth feet 3’ x 2’ x 9’ chemical compound to be used 50K.g. including all cost of materials, labour, transportation, loading, unloading, T & P etc. complete as directed by the Engineer-in-charge. |
| 208 | Supplying and laying 10 Sq mm copper conductor ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge. |
| 209 | Supply, installation, testing & commissioning of Main pannel board2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board. Incoming 250 Amp 4 pole MCCB 1 no, 300A TPN copper bus bar-1 Set,indicator lamp, struggle switch & fuses -3 Nos. Digital voltage current meter -1 No., 100/5A CT coil-3 Nos. Outgoing - 80 Amp 4 pole RCCB 2 nos, 63 Amp 4 pole RCCB 2 nos, 100 Amp 4 pole MCCB 2 Nos, 40 Amp DP RCCB 2nos & wire for wiring of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 210 | Supply & fixing of 12 way Single pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg. |
| 211 | Supply & fixing of 4 way Triple pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg. |
| 212 | Supply & fixing of 4 way Triple pole and Neutral vertical double door load line distribution board complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required. |
| 213 | Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loadsin the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. |
| 214 | Supply and fixing of 40 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 215 | Supply and fixing of 40 amp DP RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 216 | Supply and fixing of 63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 217 | Supply and fixing of 63 amp TP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 218 | Supply and fixing of 63/100 Amp 4 pole MCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 219 | Supply and fixing of 63 Amp 4 pole RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 220 | Supplying, storing, laying, testing and commissioning of 3.5 c x 95 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
