Tender For Construction Of Regional Data Centre For Apsw, Vijayawada Under National Hydrology Project, Krishna-Andhra Pradesh

TDR : 39977105

Tender Notice
BOQ

Expired

Krishna , Andhra Pradesh

Tender Brief : Tender For Construction Of Regional Data Centre For Apsw, Vijayawada Under National Hydrology Project

Document Fees
Refer document

EMD
₹ 615000.0 /-

Tender Value
Refer document

Submission Date
02-11-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Works
2	Earthwork in excavation for structures upto 3m Depth as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 4.05km, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH.
3	Augoring and boring of holes to300 mm dia. & 4000 mm depthin site for Single Under Reamed Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with 1 No. of Reameras per IS 2911 - 1980 as per approved designs and casting pile with DesignMix Concrete M25grade corresponding to IS 456 with minimum cement content of 380kgs per 1 cum of concreteusing WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and, sales & other taxes on all materials , etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) (BLD-CSTN-3-14) for300 mm dia. Bored Cast in Situ Under Reamed Piles ncluding all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, including Overheads & Contractor\"s Profit etc, complete for all depths and for finished item of work for piles of 300 mm dia. Single Under Reamed Piles to 4000 mm depth
4	Filling with Sand Cushion under P.C.C /filling with good Earth Morrum at site with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational & incidental charges, labour charges, seignorage charges, hire and opertaional charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
5	Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge
6	Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete,etc., complete for finished item of work for PCC Bed
7	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum 380kgs/cum of cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. For PLINTH BEAMS - M25
8	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but,including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content of 380kg/cum as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc.. For PEDASTALS / Columns Upto FFL - M25
9	Supply and placing of theDesign Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. for COLUMNS - M25
10	Ground Floor & Protection Wall Columns M25
11	First Floor Columns M25
12	2ND FLOOR
13	3RD FLOOR(Terrace)
14	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content of 380kgs /cum as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. ROOF BEAMS/SLABS - M25
15	Ground Floor Roof Beams M25 Concrete
16	First Floor Roof Beams M25 Concrete
17	2ND FLOOR
18	3RD FLOOR(Terrace)
19	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content of 380kgs /cum as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. ROOF SLABS -150 thick
20	Ground Floor Slab (150mm Thick M25 Concrete)
21	First Floor Slab (150mm Thick M25 Concrete)
22	Second Floor Slab (150mm Thick M25 Concrete)
23	Third Floor Slab (150mm Thick M25 Concrete)
24	Reinforced Brick Masonry 11.5cm (4 1/2\") thick for partition walls in CM (1:6) using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends o
25	Ground Floor
26	1ST FLOOR
27	2ND FLOOR
28	3RD FLOOR
29	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for LINTELS & SILL Beams-M25
30	Ground Floor
31	First Floor
32	2nd floor
33	3rd floor
34	Supply and placing of the Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor SUN -SHADES - M20 of any width as per approved plan / design and of average thickness of 62.50mm ( thickness at support 75mm and thickness at edge 50mm) -Sunshades
35	Ground Floor
36	First Floor
37	2nd floor
38	Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
39	Ground Floor
40	FIRST floor
41	Second floor
42	Third floor(Terrace) and Lift room
43	Brick Masonry in superstructure with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).
44	Ground Floor
45	First Floor
46	2nd Floor
47	3rd Floor
48	parpet wall
49	Reinforced Brick Masonry 11.5cm (4 1/2\") thick for partition walls in CM (1:6) using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends of reinforcement keyed into mortar joints of the main brick work whereever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., but excluding cost and conveyance of steel and its fabrication charges complete for finished item of work. (APSS No. 501 & 504).
50	Ground Floor
51	First Floor
52	2nd Floor
53	Third Floor
54	Plastering 20mm thick in two coats with base coat of 15mm thick in CM (1:6) and top coat of 5mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site,seigniorage charges, sales & other taxes on all materials, all operational, incidental andlabour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge,curing,etc., complete forExternal Plastering. (APSS 901,903 & 904)
55	Ground Floor
56	First Floor
57	2nd Floor
58	3rd Floor
59	Plastering 15mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 5mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing,curing, etc., complete forEven Surfaces ofWall for finished item of work. Internal Plastering (APSS 901,903 & 904)
60	Ground Floor
61	First Floor
62	2nd Floor
63	3rd Floor
64	Ornamental ceiling Plastering 12mm thick in single coat with CM (1:5) using screened sand finish including cost and conveyance of all materials like cement, sand, water etc., to site,sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing,curing, etc., complete forEven Surfaces ofWall for finished item of work. Ceiling Plastering (APSS 901,903 & 904)
65	Ground Floor
66	First Floor
67	2nd Floor
68	3rd Floor
69	Providing and applying synthetic plaster putty or plaster of paris putty or White Cement/Polymer or Cement Based Putty of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for All floors
70	Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint over one coat of primer having VOC (, including cost and conveyance of all materials to work site,sales and other taxes, incidentaland all operational,, labour charges etc. and overheads,contractor profits complete for finished item of work for Internal Walls&Ceiling in All Floors
71	Painting to new walls with 2 coats of Exterior emulsion paint ofapproved brand (Apex) and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour & scaffolding charges necessary etc. complete for finished item of work as per SS 911 forexternal Walls.(APSS No. 912) in All Floors (2 coats of Apex paint of Asian paint over one coat of primer)
72	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
73	Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )
74	Flooring with ceramic tiles (Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, . in Toilets
75	Ground Floor
76	First Floor
77	2nd Floor
78	3rd Floor
79	Providing Dadooing to walls with glazed tiles 1st. quality of any size (Colour, Size & Design as approved by Engineer-in-Charge) , set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,) in All Floors
80	Ground Floor
81	First Floor
82	2nd Floor
83	3rd Floor
84	Flooring with vitrified tiles: Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.
85	Ground Floor
86	First Floor
87	2nd Floor
88	3rd Floor
89	Providing skirting to internal walls to 10 cm height with vitrified tiles length equal to flooring tiles, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,
90	Ground Floor
91	First Floor
92	2nd Floor
93	3rd Floor
94	Flooring with high polished granite slabs 16to 18mm thick other than black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work- Treads, Risers& Landings
95	Ground Floor
96	First Floor
97	2nd Floor
98	3rd Floor
99	Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminum glazed partitions using 10 MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars/walls by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution. BMT-M-75
100	Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware\"s and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
101	Supply and fixing of toilet door shutter with frame made of M.S. door frame of 5mmX48mmX48mm (L angel) as allround frame the frame is coated with one coat of red oxide and two coats of enamel of approved color. For shutter and the shutter is made with 16mm Bison Lam shutter with allround ‘U’ Lipping of PPS section of 12mmX18mmX12mmX0.60mm, along hardware of 200m long and 12mm dia aluminum aldrop( ISI make)2 Nos, 2Nos of 125m m handle, 3 Nos of RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of 10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver for RT Patee hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of self expandable screws and caps. TOILET DOORS
102	Providing and fixing factory made uPVC white colour casement/casementcum fixedglazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware\"s and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm).
103	Providing and fixing factory made uPVC white colour fixed glazed Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.Note: For uPVC frame, sash and mullion extrudedprofiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.
104	Fabricating , Painting(2 Coats of Grade-1 Enamil paint) and Fixing the window grills with 10mm MS Sq Rods for horizontaland vertical bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat including the cost ofmaterial Labour, leads and lift etc complete for finished item of work
105	Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 4 Kg/cm2 pressure including Cost of necessary pvc bends, shoes and M.S.clampsand all other accessories and fixing in position including cost and conveyance of all materials to site , seigniorage charges sales and other taxes on all materials, all operational, incidental and labour charges such as fixing in alignment etc., complete for finished item of work.(APSS NO1328) in All Floors
106	Supply And Fixing of Stainless Steel (304 Grade) railing and Gates as per approved drawing for fixing railing, including cost and convenyance of all materials, electrodes,welding charges,cost of all cosumables,labour charges,etc complete for finished item of work
107	Damp proof course 50 mm thick with 1: 2:4 cement concrete nominal mix using 12 mm hard broken stone aggregate including cost of all materials seigniorage charges excluding conveyance charge of materials including the cost of machinery labour charges mixing placing in position levelling vibrating curing etc complete for finish item of work. BLD-cstn-2-18
108	Dismantling Stone masonry in cement mortar clearing away and carefully stacking materials useful for reuse
109	Demolishing Unreinforced cement concrete upto 15cm thickness and disposal of Unservicable material within 100 m lead
110	Demolition Brick Workincluding stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
111	Demolition R.C.C. workincluding stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead
112	Flush door shutters, solid bond wood block board type with teak ply on both faces.: 35 mmthick conforming to IS:2202
113	Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCAlaths, interlocked together through theirentire length and jointed together at theends by end-locks, mounted onspecially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels,toppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
114	Septic Tank
115	Earthwork in excavation for structures upto 3m Depth as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 4.05km, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH.
116	Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete,etc., complete for finished item of work for PCC Bed
117	Supply and placing of the M25 Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry , including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, but including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content of 380kg per 1 cum of concrete as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. For 200 mm thick Septic tank bottom slab
118	Supply and placing of the M25 Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content of 380kgs /cum as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. -125 mm thick top Slab
119	Supply and placing of the M25 Design Mix Concrete with 20MSA corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. for COLUMNS-200 mm thick Septic Tank WALLS
120	Plastering 15mm thick in two coats with base coat of 10mm thick in CM (1:5) and top coat of 5mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing,curing, etc., complete forEven Surfaces ofWall for finished item of work. Internal Plastering (APSS 901,903 & 904)
121	Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
122	Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
123	Filling with Sand Cushion under P.C.C /filling with good Earth Morrum at site with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational & incidental charges, labour charges, seignorage charges, hire and opertaional charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
124	Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs (BMW-I.87)
125	Electrical Works
126	Supplying and fixing of 25 mm dia 2 mm thick PVC pipe (ISI mark) recessed concealed in roof slabs with all required accessories including masonary work and labour charges ect., complete. (1.4.2c)
127	supply and fixing of 25mm dia 2mm thick PVC pipe(ISI) concealed in wall with all required accessories including masonary work and labour charges etc., complete (1.4.2a)
128	Wiring with 2 runs of 14/03 mm (1.0sq.mm) fire retardant (FR) PVC insulated flexible copper cable (ISI Mark) In existing pipe with 6A switch, control box including all labour charges etc., complete for light, bell, fan and exhaust fan poits in Non- residential buildings(2.1.1)
129	Wiring with 2 X 1.0 Sq.mm(14/0.3 mm) PVC insulated flexible copper cable in the existing metalic / non metalic conduit pipe with 6 A flesh type marked switch control for 3 / 2 pin sockets fixing on seperate board including labour charges etc., complete (2.1.3)
130	Supplying and run of 2 of 56 / 0.3 mm (4.5 Sq. mm) PVC insulated flexible copper cable in existing matalic / non metalic conduit pipe for run of mains inlcuding all labour charges etc., complete (3.1.5)
131	Supplying and run of 2 of 36 / 0.3 mm (2.5 Sq. mm) PVC insulated flexible copper cable in existing matalic / non metalic conduit pipe for run of mains inlcuding all labour charges etc., complete (3.1.4)
132	Supplying and run of 2 of 22 / 0.3 mm (1.5 Sq. mm) PVC insulated flexible copper cable in existing matalic / non metalic conduit pipe for run of mains inlcuding all labour charges etc., complete (3.1.3)
133	Supply and Transport of 1 X 40 w patty type tube light luminaire with copper choke, starter etc. including 1no 40w tube etc., complete. (8.2.4)
134	Supplying and transportation of 2x36/40w recessed mounting mirror optic luminaire with Aluminium mirror reflector with VPIT chokes, starter, condensor etc complete with 2 nos 36/40 w tubes etc, complete.(8.4.2)
135	Supplying and erecting exhaust fan light duty 250 V AC 50 Cycles 300 mm (12\") 1350 RPM metallic body plastic blades, wire mesh, etc., complete (9.7.16) & (9.7.36) (crompton)
136	Supplying and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40 W bulb etc., complete for new installation. (2.1.7)
137	supplying and fixing of ceiling fan1200mm(48\") sweep230v, a.c Hzwith 3 blades and double ball bearings with all standard accessories.(crompton make high speed) (9.7.2) and(9.7.35)
138	Supplying and erecting ofresistance approved make fan stop regulator for ceiling fans 1200mm sweep complete erected on existing boared labour charges etc., complete. (9.7.26)
139	Supplying and erecting of approved make telephone socket jack single 4 lines (similar to Anchor Roma R3 11) as directed by the department including cost & conveyance of all materials and labour charges etc., complete
140	Proding independt earthing for sophisticated equipment like Computer, Medical Equipment, electronic gadgets etc., with 600 mm X600 mm X 3.15 mm thick copper plate rigidly fixed to the 40 mm dia GI pipe of 0.3 m length connected with reducer providing GI Funnel with wire mesh as per national electric code including C.C chamber of size 400 mm X 400 mm X 400 mm covered with RCC slab filling with salt and charcoal giving earth connection from the electrodes to GI strip of 25 mmX 6 mm X 200 mm length provided with all accessories and labour charges complete as per IS specificaton 732/1982 complete (5.1.3)
141	Supply of split AC unit with high wall mounted indoor unit and outdoor condencing unit hermetically sealed compressor suitable for operation on 230V 50HZ, 1 phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condencing units with 3.5m of copper piping,insulation kit and 4m of 3 core copper flexible chord, built-in stabilizer (voltage range 160-264 V) and cordless remote control including cost and conveyence of all materials and all labour charges complete as directed by the department. ( 2.0 TR 5 Star capable )
142	supply and erection of panel mounting cubical type L.T heavy duty on load change over switch of 200A, 4pole 415V, 50hz with all accessories etc., complete on existing control panel.(4.2.3)
143	Supplying and erecting 100 AMP Isolator ISI approved including Cost & Conveyance of all materials and labour charges etc., complete
144	Supplying and erecting 40 A DP Isolator ISI approved including Cost & Conveyance of all materials and labour charges etc., complete Sl.No.133
145	Supplying and erecting 6-32 Amps ISI approved Single Pole miniature circuit breaker including cost & conveyance of all materials and labour charges etc., complete Sl.No.134
146	supplying and fixing of heavy duty flange type brass cable glands for 4core, 16 sqmm /3.5 core 25sq.mm PVC armoured cable with brass washers complete. 15.3.3
147	Supplying and erecting 100 A - 415 V fues unit in approved manner as directed by the department including Cost & Conveyance of all materials and labour charges etc., complete.(Sl.No203)
148	Supplying and fixing of size 15\"x20\" TW peeta board including 3No\"s, 63amp 415V porcelain rewirable fuse unit and 63A N link including cost and conveyance of all material and all labour charges etc. complete
149	Supplying and erecting 4 pole sheet metal / iron clad HRC fues switch ISI approved make 415 / 500 V 200 A withHRC fueses, conduit entry erected on angle iron frame covered with 3 mm thick white hylam sheet cover etc., complete including Cost & Conveyance of all materials and labour charges etc., complete (4.1.20)
150	supply and fixing TPN Distribution boadrd with IP-42 protection (metal door) suitable for 3 phase ELCB/RCCB/FP isolator as incomer and 10ka SP MCBs as outgoing including internal connection and labour charges for surface/flush mounting etc., complete.(4.4.3)
151	Supplying and fixingSPN 8 way distribution board with IP-42 protection (metal door) suitable for sing phase ELCB/RCCB/DP isolator as incomer and 10ka Sp MCBs as outgoing including internal connections and labour charges for surface / flush mounting etc.,complete (4.4.2b)
152	Supplying and erecting of approved make 32amps heavy duty socket and MCB for flush mounting with concealed box suitable for AC units as directed by the department including cost & conveyance of materials and labour charges etc., complete (19.1.26)
153	Supply and erecting approved make centrifugal water pump with impeller, priming funnel cork, companion metallic flanzes, with bolts and nuts and mounted on a common shaft of high efficient squirrel cage induction motor totally enclosed and fan cooled type suitable to operate on 230 V single phase, 50 Hz, 1440 RPM AC supply of 1.5 HP with Min/Max discharge/ litre per second for minimum / maximum head / mts and suction / delivery pipes of sizes / mm with nuts duly grouted in existing CC foundation and bolts, spring washers of requisite size monoblock motor and pump as per quatation.
154	Sanitary Works
155	S& F 15 mm Nominal Bore GI pipe Medium Grade as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
156	S& F 20 mm Nominal Bore GI pipe Medium Grade as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
157	S& F 25 mm Nominal Bore GI pipe Medium Grade as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
158	S & F 25.4 mm GM peet valve Indian make heavy type including cost and conveyance of all materials and labour charges etc., complete as directed by the department.
159	S & F of 75 mm PVC Sewarage pipes withstanding to pressure of 4 Kg/Sqcm as per ISI standards including cost and conveyance of all materials and labour charges etc., complete as directed by the department.
160	-do- for 90 mm dia pipe
161	-do- for 110 mm dia pipe
162	Supply of 75 mm plain bend (87.50 degree) of Prince/ Sudhakar make or equivalent qualityU.V resistant UPVC) SWRpipe fittings (as per ISI standards ) including cost and conveyance of all materials and labour charges etc., complete as directed by the department.
163	-do- for 90 mm dia
164	-do- for 110 mm dia
165	-do- for 90 mm dia Door bend
166	-do- for 110 mm dia Door bend
167	-do- for 90 mm dia single \"T\" with door material
168	-do- for 110 mm dia single \"T\" with door material
169	-do- for 90 mm dia Coupler material
170	-do- for 110 mm dia Coupler material
171	Supply and fixing of PVC 4\" (101.6 mm) dia Naini multy floor trap with jali and boxing of naini traps in RCC floor including cost and conveyance of all materials, labour charges etc., complete.
172	Supply and fixing of specified colour 558.8 mm X 406.4 mm indian make wash hand basins along with same colour pedastal (HSW /Parry/ Earthenware)with 12.70 mm double NP 400 grams piller taps waste plug chain complete with CI brackets including wooden block and 31.75 mm CP bottle trap heavy type including cost and conveyance of all materials and labour charges etc., complete.
173	Supplying and fixing 584.2mm long Indian pattern white glazed W.C with \"P\" or \"s\" trap Hindware/Parryware/Neycer-ISI mark and S&F porcelain foot restfor I.W.C(rectangular pair) etc. complete.
174	Supplying and fixing European type Hindustan/Neycer or Parry W.C best indian make white glazed with S trap and S&F best Indian make plastic seat and lid for European water closets and Buffers as per IS 2548-1963 etc. complete.
175	Supplying and fixing low down porcelain flushing tank 10 lit capacity Hindustan Sanitary ware/parry/Neycer with internal components etc. complete.
176	Supply and fixing of specified white glazed flat back urinals with screws complete indian make (TWYFORT) (Parry / Neycer) including cost and conveyance of all materials and labour charges etc., complete.
177	S & F 19.05 mm NP stop cock Indian make with ISI mark 400 grams including cost and conveyance of all materials and labour charges etc., complete.
178	S & F 19.04 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials and labour charges etc., complete.
179	Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including cost and conveyance of all materials and labour charges etc., complete.
180	Supply & fixingsoap dish jaquar make continental series chrome finish colourincluding cost and conveyance of all materials and labour charges etc., complete.
181	Supply & Fixing of Towel rod 24 \" Jaquar make Queen series Ivory gold colour including cost and conveyance of all materials and labour charges etc., complete.
182	Supply of Sintex or equivalent Polyethylene water tank double layer confirming to ISI 12701/96 mark with lid
183	Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3\"-0\") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. BMW-B.03
184	Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5\"-0\") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
185	Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5\"0\") depth and refilling with watering and tamping.
186	Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3\"0\")) depth and refilling with watering and tamping.
187	Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and overheads & contractors profit complete for finished item of work. (APSS No. 1328)
188	8 Passenger Lift,Price for 1 No.8 passenger SS Mat finish 304 Grade power operated framed toughened Glass Centre opening doors elevator
189	High Quality imaging with 4MP resolution , efficitnt H.2645 +compressing technoly , clear imaging against strong back ling with 120 DB WDR, water and dust resistant( IP67), Exir 2.0 advanced infrared technology with ling IR distance, H.265/ H.264/H.264+ video formats connectable to the third part network cameras upto 16 IP camers can be connected recording at upto 8 MP resolution , 4 TB Hard Disk, POE swith, D Link wire 305 bundle, Modular acess control with Card + PIN, Installation -CC TV and Acces control
190	15 kVADiesel Generator, 3 Phase
191	Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation, all taxes and all labour charges etc complete.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Andhra Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Regional Data Centre For Apsw, Vijayawada Under National Hydrology Project, Krishna-Andhra Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Regional Data Centre For Apsw, Vijayawada Under National Hydrology Project, Krishna-Andhra Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us