Assam Rifles-AR has published Tender For Spl Repair To Hosp Bldg And Attenders Barracks And Retaining Wall For Arch Sukhovi Nagaland. Submission Date for this Tender is 20-10-2023. Barrack Tenders in Dimapur Nagaland. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SCHEDULE `A" PART -I (BUILDING WORKS) HOSPITAL Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead etc. complete with CM 1:4. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 4 | Providing and laying of ceramic glazed wall tiles of approved make in all colours of 300 x 450 size in walls/skirting over 12 mm thick bed of cm (1:3) and jointing with grey cement slurry @ 3.30 kg per sqm incl pointing the joints with white cement. |
| 5 | Distempering with 1st quality acrylic distemper (ready mixed) havingVOC content less than 50 gms/litre, of approved manufacturer, ofrequired shade and colour complete, as per manufacturer"s specification including surface preparation. |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) havingVOC content less than 50 gms/litre, of approved manufacturer, ofrequired shade and colour complete, as per manufacturer"s specification including surface preparation for ceiling |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Providing and painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 9 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 11 | Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 12 | Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 13 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall ofcement of mix 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing and laying in position reinforced cement concrete (1:2:4) with 20 mm nominal size stone aggregate , excluding the cost of centering, shuttering, finishing and reinforcement in wash hand basin. |
| 15 | Providing and placing steel reinforcement for RCC work incl straightening, cutting, bending, placing in position and binding etc all complete. (TMT bar) |
| 16 | Providing centering and shuttering including strutting propping etc and removal of form work. |
| 17 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave , holdfast etc. complete (Of area 3 sq. metres and below) and taking out doors, windows shutters including stacking within 50 metres lead. |
| 18 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave , holdfast etc. complete (Of area beyond 3 sq. metres and below) and taking out doors, windows shutters including stacking within 50 metres lead. |
| 19 | Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete. |
| 20 | Providing and fixing factory made 30 mm thick door shutter made out of solid panel , single piece extruded soild PVC profiles.as per manufacturer"s specifications and direction of Engineer-in-charge.Non decorative finish (matt finish) |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (Second class teak wood, 35 mm thick shutters) |
| 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (Second class teak wood) |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (Float glass panes, 5.0 mm thick glass panes (weight not less than 12.5 kg per sqm) |
| 24 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : (125x85x5.5 mm (heavy type)) |
| 25 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (Size 200x10 mm) |
| 26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (Size 150x10 mm) |
| 27 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (Size 100x10 mm) |
| 28 | Providing and fixing bright finished brass handles with screws etc. complete: (Size 125 mm) |
| 29 | Providing and fixing bright finished brass handles with screws etc. complete: (Size 100 mm) |
| 30 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (Size 300x16 mm) |
| 31 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (Size 300x16 mm) |
| 32 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 33 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides) |
| 34 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism for door , including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot andsingle piece M.S. sheet outer box with slide plate etc. complete With stainless steel cover plate minimum 1.25 mm thickness |
| 35 | Providing and fixing ISI marked oxidised M.S. handles (100 mm)conforming to IS:4992 with necessary screws etc. Complete |
| 36 | Providing and fixing oxidised M.S. casement stays (straight peg type) 200 mm weighing not less than 120 gms with necessary screws etc. complete. |
| 37 | Providing and fixing of curtain rods of 1.25mm thick chromium plated brass plate , with two chromium plated brass brackets fixed with CP brass screws and wooden plugs etc, wherever necessary complete of size 25 mm dia. |
| 38 | Earth work in surfaceexcavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed in all kind of soil. |
| 39 | Supplying and stacking at site(90 mm to 45 mm size stone aggregate) |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 41 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M 30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete as per the direction of Engineer – In – Charge. |
| 42 | Half brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure upto plinth level in CM 1:4 (1 cement : 4 coarse sand) |
| 43 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall ofcement of mix 1:4 (1 cement : 4 coarse sand) |
| 44 | SCHEDULE‘A’ PART- II (ATTENDER"S BARRACK) Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand). |
| 45 | Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 46 | Providing and laying non skid ceramic floor tiles of size 300x300mm ( thickness to be specified by the manufacturer) of approved make, in all colours and shades except white, Ivory, Grey laid on 20mm thickCM 1:4 (1cement :4 coarse sand), incl grouting the joints with white cement and matching pigments. etc. complete. |
| 47 | Providing and laying Vitrified tiles in Size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
| 48 | Providing and fixing of wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 49 | Providing and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 50 | M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 51 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand) |
| 52 | Dismantling doors, windows shutters including chowkhats, holdfasts etc complete of area3 sqm and below. |
| 53 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars. |
| 54 | Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete. |
| 55 | Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood. |
| 56 | Providing and fixing aluminium tower bolts of size : 100x10 mm with necessary screws etc. Complete. |
| 57 | Providing and fixing aluminium handles of size : 100 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 58 | Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm. |
| 59 | Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts completeof 0.63mm dia wire and 1.4 aperture on both sides. |
| 60 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: with 4mm thick glass panes. |
| 61 | Providing and fixing ISI marked oxidised M.S. handles (100 mm)conforming to IS:4992 with necessary screws etc. complete : |
| 62 | Providing and fixing oxidised M.S. casement stays (straight peg type) 200 mm weighing not less than 120 gms with necessary screws etc. complete. |
| 63 | Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shadeincluding removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. |
| 64 | Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete. |
| 65 | Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete. |
| 66 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete. |
| 67 | Providing and painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 68 | Providing and fixing of curtain rods of 1.25mm thick chromium plated brass plate , with two chromium plated brass brackets fixed with CP brass screws and wooden plugs etc, wherever necessary complete of size 20mm dia. |
| 69 | SCHEDULE‘A’ PART- III(INTERNAL ELECTRIFICATION HOSPITAL BUILDING WORK) Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel / PVC conduit including dismantling as required.(Group C) |
| 70 | Supply and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 71 | Supply and fixing 5/6 amps switch piano type on the existing switch box/ cover including connections etc. as required. |
| 72 | Supply and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 73 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 74 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 75 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 76 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required 8 ways. (But without MCB/RCCB/Isolator) |
| 77 | Supply and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 78 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as requiredof 40 amps |
| 79 | Supply and fixing 3 pin 5/6 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. |
| 80 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pippe of 2.7 metre long etc. (but without charcoal/ coke and salt) as required. |
| 81 | Switch fuse disconnector unit TPN, 63 Amps, 415 volts. |
| 82 | Supply and laying earth connector from earth electrode with 6 SWG dia GI wire in 15mm dia GI pipe from earth electrode including connection with GI thimble excavation and re filling as reqd. |
| 83 | Supply and fixing 15/16 amps switch piano type on the existing switch box/ cover including connections etc. as required. |
| 84 | Supply and fixing 3 pin 15/16 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. |
| 85 | Wiring for for light/power plug with 4x4sqmm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 2 Nos 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required |
| 86 | Wiring for circuit/ submain wiring along with earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 87 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required |
| 88 | Supplying and fixing TV antenna socket outlet piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 89 | Supplying and fixing telephone socket outlet piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 90 | SCHEDULE‘A’ PART- IV(TOILET AND BATH BLOCK) Earth work in surface excavation n"exe 30 cm deep but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m , disposed soil to be levelled and neatly dressed ( All kinds of soil) |
| 91 | Earth work in excavation in trenches n"exc 1.5 m wide and n"exc 1.50 mtr in depth for fdn etc and getting out in all kinds of soil). |
| 92 | Providing and laying in position PCC 1:3:6in fdns, filling and mass concrete- All work up to plinth level. |
| 93 | Providing and laying for RCC 1:1.5:3 (use 20mm graded aggregate) in fdns, plinth beams, base of columns- All work upto plinth level. |
| 94 | -ditto- but in columns, pillars, piers, posts and struts. Etc.All work above plinth level. |
| 95 | M/L for centering and shuttering including strutting, propping etc and removal of form for columns , pillars, piers,abutments,posts and struts |
| 96 | M/L for centering and shuttering including strutting, propping etc and removal of form for lintels, beams,plinth beams, girders, bressumers and cantilevers. |
| 97 | M/L for centering and shuttering including strutting, propping etc and removal of form for weather shade, chajjas, corbels etc , including edges. |
| 98 | M/L for centering and shuttering including strutting, propping etc and removal of form for suspended floors, roofs, landings, balconies and access platform. |
| 99 | M/L for steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete . (use Thermo-Mechanically Treated bars.) |
| 100 | M&L for brick work with F.P.S bricks of class designation 75infoundation and plinth in cm 1:6. |
| 101 | M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 102 | M&L for plastering 15mm thick on the rough side of single or half brick wall of mixuse cm 1:4for externally. |
| 103 | M&L for plastering 12 mm thick on the rough side of single or half brick wall of mixuse cm 1:6for internally. |
| 104 | M&L for plastering 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) for ceiling plastering |
| 105 | Returning, filling in, available earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 106 | M&L for brick on edge flooring with bricks of class designation 75 including cement slurry etc.complete in cement mortar with F.P.S bricks in cm 1:6. |
| 107 | M&L for 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 and top layer 12 mm thick cement hardener consisting of mix 1:2 by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 108 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 109 | Providing and laying in position cement concrete of1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering etc. |
| 110 | Providing and laying non skid ceramic floor tiles of size 300x300mm ( thickness to be specified by the manufacturer) of approved make, in all colours and shades except white, Ivory, Grey laid on 20mm thickCM 1:4 (1 cement :4 coarse sand), incl grouting the joints with white cement and matching pigments. etc. complete. |
| 111 | Providing and laying of ceramic glazed wall tiles of size 200x300mm of approved makein all colours of any size in walls/skirting or dados over 12 mm thick bed ofCM (1:3) and jointing with grey cement slurry @ 3.3 kg per sqm incl pointing the joints with white cement complete. |
| 112 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars. |
| 113 | Providing and fixing factory made steel glazed windows and ventilators , side/top/centre hung , with beading and all members such FD7,F4B,K11B etc, including providing and fining hinges, pivots, including priming coat of approved steel primer of fixing with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm of cement concrte (1:3:6). |
| 114 | Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts completeof 0.63mm dia wire and 1.4 aperture on both sides. |
| 115 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows and ventilators all complete with 4mm thick glass panes. |
| 116 | Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete. |
| 117 | Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood. |
| 118 | Providing and fixing factory made 30 mm thick door shutter made out of solid panel , single piece extruded soild PVC profiles.as per manufacturer"s specifications and direction of Engineer-in-charge.Non decorative finish (matt finish) |
| 119 | Providing and fixing aluminium tower bolts of size : 100x10 mm with necessary screws etc. Complete. |
| 120 | Providing and fixing aluminium handles of size : 100 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 121 | Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm. |
| 122 | Providing and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 123 | M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 124 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand) |
| 125 | Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shadeincluding removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. |
| 126 | Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete. |
| 127 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete. |
| 128 | Providing and painting two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 129 | SCHEDULE‘A’ PART- V (PLUMBING AND SANITARY FITTING WORK) Providing and fixing water closet squatting pan, White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 130 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (W.C. pan with ISI marked white solid plastic seat and lid)(Make - Hindware/Paryware/Hindustan) |
| 131 | Providing and fixing white vitreous pedestal type china wash hand basin (Size 630x450 mm) incl pedestal with C.I. Brackets, 15 mm C.P Brass pillar taps, 32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete. |
| 132 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (W.C. pan with ISI marked white solid plastic seat and lid) (Make - Hindware/Paryware/Hindustan) |
| 133 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (Make - Hindware/Paryware/Hindustan) |
| 134 | Providing and fixing 600x450mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with CP brass screws and washers complete. |
| 135 | Providing and fixing 32 mm dia flexible P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. |
| 136 | Providing and fixing of PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 137 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 138 | Providing and fixing of 15mm nominal bore CP bib cock of approved quality. |
| 139 | Providing and fixing of 15mm nominal bore CP angle cock of approved quality. |
| 140 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 141 | Providing and fixing of 15mm nominal bore connection pipe of approved quality. |
| 142 | Providing and fixing C.P. brass shower rose ,100 mm diameter with 15 or 20 mm inlet : |
| 143 | Providing and fixing of 15 mm nominal bore Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms of approved quality. |
| 144 | Providing and fixing on wall unplasticised rigid PVC sewargrade Class "B" pipes incl jointing with seal ring, single socketed pipes of 75 mm dia. |
| 145 | Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 100 mm dia. |
| 146 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 40 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk) |
| 147 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk) |
| 148 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm diapipes, having thermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed wk) |
| 149 | Construction of brick masonry manhole in cement mortar (1:4) with RCC top slap with (1:2:4) mix foundation concrete (1:4:8) mix inside plastering 12 mm thick with CM (1:3) finished with floating coat of neat cement and making channel in cement concrete (1:2:4) etc complete with common burnt clay FPS (non modular) bricks. |
| 150 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 151 | SCHEDULE‘A" PART- VI(INTERNAL ELECTRIFICATION ATTENDER"S BARRACK WORK ) Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.(Group C) |
| 152 | Supply and fixing 5/6 amps switch piano type on the existing switch box/ cover including connections etc. as required. |
| 153 | Supply and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 154 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 155 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required 6 ways. (But without MCB/RCCB/Isolator) |
| 156 | Supply and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 157 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as requiredof 40 amps |
| 158 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pippe of 2.7 metre long etc. (but without charcoal/ coke and salt) as required. |
| 159 | Switch fuse disconnector unit TPN, 63 Amps, 415 volts. |
| 160 | Supply and laying earth connector from earth electrode with 6 SWG dia GI wire in 15mm dia GI pipe from earth electrode including connection with GI thimble excavation and re filling as reqd. |
| 161 | Supply and fixing 15/16 amps switch piano type on the existing switch box/ cover including connections etc. as required. |
| 162 | Supply and fixing 3 pin 15/16 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. |
| 163 | Wiring for for light/power plug with 4x4sqmm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 2 Nos 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required |
| 164 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) |
| 165 | SCHEDULE‘A’ PART- VII (RETAINING WALL) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (All kinds of soil) |
| 166 | Earth work in excation in trenches not exc 1.50 mtr deep and wide and getting out hard/dense soil. |
| 167 | M&L for PCC 1:4:8in fdn filling and mass concrete using 40mm aggregates |
| 168 | M & L forRandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : (Use Cement mortar 1:6 (1 cement : 6 coarse sand)) |
| 169 | M&L for Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. (Use Cement mortar 1:6 (1 cement : 6 coarse sand)) |
| 170 | M&L for cement concrete 1:2:4 in coping with necessary form wk. |
| 171 | M&L for raised pointing in cm 1:3 to random (or) polygonal rubble masonry. |
| 172 | M&L for hard packing at back of wall with broken stone (use 90 mm to 45 mm ). |
| 173 | M&L for PCC 1:3:6 for weep holes. |
| 174 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes etc.(use 75 mm diameter) |
| 175 | M&L for PCC 1:3:6 for drain wk. |
| 176 | M&L for formwk for drain wk As 4.3.1 |
| 177 | M&L for 15 mm cement plaster 1:3 on rough side of single or half brick wall finished with a floating coat of neat cement of mix:- |
| 178 | SCHEDULE‘A’ PART- VIII (100 USERS SEPTIC TANK) Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth upto 50m and lift upto 1.5m in all kind of soil. |
| 179 | Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches ( not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m for all kinds of soil. |
| 180 | Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked materials. |
| 181 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all work upto plinth level 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregates 40 mm nominal size) |
| 182 | Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregates 20mm nominal size) |
| 183 | Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundations etc in layers not exc 20 cm in depth, consolidating each deposited layers by ramming and watering lead upto 50 m and lift upto 1.5m. |
| 184 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 185 | Providing and laying up to plinth level reinforced cement concrete and the like, excluding the cost of centering , shuttering, finishing and reinforcement with 1:2:4 ( 1Cement : 2 Coarse sand : 4 graded stone aggregates 20 mm nominal size) in baffle wall. |
| 186 | Providing and hoisting and fixing up to floor five level precast reinforced cement concrete work in Manhole chamber slab including cost of centering, shuttering but excluding cost of reinforcement with (1:2:4) mix with 20 mm nominal size graded stone aggregates. |
| 187 | Centering and shuttering including strutting, propping etc and removal of form for suspended floors, roof slab. |
| 188 | Centering and shuttering including strutting, propping etc and removal of form for vertical surfaces for baffle wall. |
| 189 | Centering and shuttering including strutting, propping etc and removal of form in sides of roof slab. |
| 190 | Steel reinforcement for RCC work including straightening, cutting, bending placing in position and binding all complete (TMT bars) |
| 191 | Providing and laying 20 mm thick Cement plaster 1:3 (1 Cement : 3 Coarse sand) finished with a floating coat of neat cement. |
| 192 | Providing and laying 15 mm thick Cement plaster 1:4 (1 Cement : 4 Coarse sand) on rough side of single or half brick wall. (Out Side) |
| 193 | Providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturers specification |
| 194 | Providing and fixing PVC vent pipe 75 mm dia with vent cowl fixing properly. |
| 195 | SCHEDULE‘A’ PART- IX (SOAK PIT) Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 196 | SCHEDULE‘A’ PART- X (PAVER BLOCK FOOT PATH WAYS ) Earth work in surfaceexcavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed in all kind of soil. |
| 197 | Supplying and stacking at site.(Over burnt (Jhama) brick aggregate 90 mm to 45 mm) |
| 198 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 199 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M 30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete as per the direction of Engineer – In – Charge. |
| 200 | Half brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure upto plinth level in CM 1:4 (1 cement : 4 coarse sand) |
| 201 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall ofcement of mix 1:4 (1 cement : 4 coarse sand) |
| 202 | SCHEDULE "A" PART XI : SCH OF CREDIT. Retrived store for Re-wiring (It is necessary to quote at least Rs. 20/- per Point or more) |
| 203 | Unsv door / window shulter(It is necessary to quote at least Rs. 70/- per Nos or more) |
| 204 | Unsv Bib / Stopcock / Gatevalves(It is necessary to quote at least Rs. 10/- per Nos or more) |
| 205 | Aluminium / M. S Scrap(It is necessary to quote at least Rs. 25/- per Kgs or more) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
