Military Engineer Services-MES has published Tender For Smart Periodical Services To External Compound Wall And Repair/ Replacement Of Ac Sheet, Structural Steel, False Ceiling And Connected Work Under Age B/R-I At Ge Jhansi. Submission Date for this Tender is 20-10-2023. False Celing Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 2 | Material and labour for 1 mm thick wall care putty on wall and prepare the surface even and smooth complete all as specified and directed. |
| 3 | Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colourwith silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Notes for Ser item No 1 to 3 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work. (d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 08 years warranty card at the time of submission of RAR & Final Bill. |
| 4 | M&L for preparation of existing surface of walls and applying two coats of cement basepaint over a coat of cement base primer complete all as specified and directed. |
| 5 | M&L for preparation of existing old concrete/plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 7 | Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces of wall in cement mortar 1:4 and finishing the surfaces even and fair mixed with liquid water proofing compound as per manufacturer"s instruction complete all as specified and directed. Note: Water proofing compound shall be measured & paid separately. |
| 8 | Supply only liquid water proofing compound complete all as specified and directed. |
| 9 | Material and labour forpreparation of old painted wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 10 | Material and labour for prepration of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 12 | Supply and fix of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 13 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6finished fair and even complete all as specified and directed. |
| 14 | Preparing newly plastered surfaces of wall and applying two coats of distemper oil emultion over a coat of JK/Birla wall care putty complete all as sppecified and directed. |
| 15 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 16 | M&L for Non-skid cermaic coloured tiles (mat flooring)Size 300X300X7 to 8mm thick, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 17 | M&L for Coloured Glazed ceramic tiles 450x 300 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick redering in CM 1:4 on wall complete all as specified and directed. |
| 18 | M&L flor Jointless Non-skid cermaic tiles 7 to 8mm thick (squre/rectanglar) are of ech tiles 600MMX600MM, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 19 | All as per Ser item No 18 abovebut in skirting including 10mm thick backing coatin CM 1:4 on wall complete all as specified and directed. |
| 20 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 21 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceilin tiles at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed. |
| 22 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and directed |
| 26 | M&L mild steel work as roof trusses (framed) trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections)etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
