|
| 1 | M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) hoisted and fixed in position all as specified in SSR part-I for capacity 500 liters incl hoisting and fixing at speciifed location complete all as specified and directed |
| 2 | M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) hoisted and fixed in position all as specified in SSR part-I for capacity 1000 liters incl hoisting and fixing at speciifed location complete all as specified and directed |
| 3 | Taking down of15 mm bore galvanised iron tubing and connection including cleaning for refixing the same at position specifed on walls, ceiling or laid in floor complete all as specified and directed.Note: (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required |
| 4 | S&F 15mm bore GI tubing ISI marked medium grade with all fittings to wall and ceiling or laid in floors including taking down and removal from site complete all as specified and directed. |
| 5 | S&F 20mm bore GI tubing ISI marked medium grade with all fittings to wall and ceiling or laid in floors including taking down and removal from site complete all as specified and directed. |
| 6 | S & F20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut complete screwed to iron pipe or brass ferrule complete all as specified |
| 7 | S & F 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwedboth ends for ironc pipe all as specified and as directed |
| 8 | S & F15 mm bore stop valve/anglecast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe all as specified and as directed |
| 9 | Taking down chowkats or frame with shutter (PVC DOOR AND WINDOW VENTILATOR) (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed |
| 10 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction. |
| 11 | S & F for 30 mm thick factory made solid panel both side prelaminated PVC door shutter with smooth finish confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded both side prelaminated PVC `C\" channel of size 30x50mm forming styles and 5mm thick 75mm wide both side prelaminated PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross both side prelaminated PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick both side prelaminated PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of \"C\" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed. |
| 12 | Providing and fixing ISI marked aluminium butt hingesof size 100x75x4 mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and directed |
| 13 | Providing and fixing 150 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 14 | Providing and fixing aluminium tower bolts of size 150 x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 15 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed |
| 16 | S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mmwood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing etc complete and as directed. |
| 17 | S & F 30 mm thick 2nd class Hard wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc having dimension as per Section 8.24(a) of SSR part- I and fitted to chowkats complete all as specified and directed. |
| 18 | Demolition of concrete of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge. |
| 19 | M & L for PCC 1:2:4 type B0 in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles etc complete all as specified & directed. |
| 20 | S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. |
| 21 | Providing and fixing aluminium sliding door bolts 300x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : all as specified & directed. |
| 22 | Providing and fixing aluminium work for frame/shutter/fixed portions of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per specified and directed. (Glazing, paneling to be paid for separately) : (Mim Thickness of Section shall not be less than 1.5 mm)((minimum thickness of polyster powder coating 50 micron) NOTE:- The purchase Voucher of Alumnium Section shall be submitted for claiming payment. Non Submission may lead to non payment |
| 23 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation ofhandles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction ofEngineer-in-charge. (Only weight of grill to be measured for payment)(Pattern Deco Gril). |
| 24 | Providing and fixing glazingWith float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) NOTE:- The purchase Voucher of Float glass shall be submitted for claiming payment. Non Submission may lead to non payment |
| 25 | S&F 12 mm thick Block board, grade 2 quality,interior grade, commercial type used in partition wall etc complete all as specified & directed. |
| 26 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 27 | S & F Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm and fixed with tinned tacks ro galvanised wire stapple etc complete all as specified & directed. |
| 28 | M & L 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement etc including taking down and removal from site complete all as specified and directed. |
| 29 | M & L 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound etc including taking down and removal from site complete all as specified and directed. (WPC will be measured and paid separately) |
| 30 | M & L for rendering 5 mm thick on ceiling on fair faces of concrete surface in Cm 1:3 finished even and smooth without using extra cement etc including taking down and removal from site complete all as specified and directed.. |
| 31 | M & L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper overand including a coat of primer of approved tint, complete all as specified. |
| 32 | M & L preparation of newly plastered surfaces and applying two coats of cement base paint over and including a coat of primeron walls etc complete all as specified & directed. |
| 33 | M & L preparation of newly plastered surfaces and applying three coat of white wash on ceilingetc complete all as specified & directed. |
| 34 | M & L preparation of old plastered surfaces and applying one coats of cement base paintwalls over and includinga coat of primeretc complete all as specified & directed. |
| 35 | M&L for preparation of old plastered surface of ceiling and applying twocoat of white wash complete all as specified and directed by Engr-in-charge |
| 36 | M&L preparing old distempered surfaces of walland applying onecoat of oil emulsion distemperover and including a coat of primeretc complete all as specified and as directed. |
| 37 | M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint over and including a coat of primer etc complete all as specified and as directed. |
| 38 | M & L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over and including a coat of primer etccomplete all as specified and as directed. |
| 39 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etccomplete all as specified and as directed. |
| 40 | S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps including taking down of old pipe of any size and discription and removal from site complete all as specified anddirected |
| 41 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes as directed |
| 42 | S & F 110mm bore of pipe PVC (SWR) single ,(Single T) equal or unequal etc complete all as specified & directed |
| 43 | S & F 75mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring jointlaid on floor etc complete all as specified &as directed |
| 44 | S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes as directed |
| 45 | S & F 75 mm bore of pipe PVC (SWR) single ,(Single T) equal or unequal etc complete all as specified & directed |
| 46 | S & F 75 mm bore of pipe PVC (SWR) floor trap,plain with grating incl jointing with solvent etc complete all as specified & directed |
| 47 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)etc complete all as specified and as directed. |
| 48 | M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement complete all as specified and directed.Note:- The groove demarcating panels shall be filled with hot blown bitumen |
| 49 | Demolition of cement concrete of any description & in any position not otherwise specially provided foretc complete all as specified & directed. |
| 50 | M & L 40 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor(WPC shall be measured and paid separately) |
| 51 | M& L applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm etc complete all as specified & directed. |
| 52 | M & L for rendering 15 mm thick in CM 1:3 with using water proofing compound (WPC shall be measured and paid separately) all as specified |
| 53 | Supply only integral water proofing compound of approved quality |
| 54 | M & L PCC 1:7:12 type F2 as in sub base of floor mass filling using 40 mm graded aggregate with using water proofing compound etc complete all as specified |
| 55 | S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified. |
| 56 | Taking down shutters of any description and refixing the same in same opening or other opening exceeding 1.00 sqm but not exceeding 2.00 sqm each etccomplete all as specified. |
| 57 | Dismantling ofcast iron drain pipe jointed in lead joints or cement joints and taking outif requiredetccomplete all as specified. |
| 58 | S & F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints etccomplete all as specified. |
| 59 | S & F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without fixed to walls or in floor with cement joints etccomplete all as specified. |
| 60 | S & F cast iron floor trap with grating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed |
| 61 | S & F 100 mm bore cast iron bends/double T of any radius diminshing pieces or tappers (larger bore measured) etccomplete all as specified. |
| 62 | S&F in repairvitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed. |
| 63 | Supply and fixed in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 64 | S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed. |
| 65 | S & F32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 66 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm etccomplete all as specified. |
| 67 | S & F in repair 15 mm chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete allas specified and as directed. |
| 68 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. |
| 69 | S&F in repairs wash down water closet EWC floor mountingincl all necessary accessoriesetc complete all as specified and as directed. |
| 70 | S&F Health Faucet with 1.5 mtr long SS tube and hook etc complete all as specified and as directed. |
| 71 | S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etccomplete all as specified & directed. |
| 72 | Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work andprecast concrete articles etccomplete all as specified and directed. |
| 73 | M&L brick work in CM (1:6) with sub class ‘B’ bricks straight or curved on plane exc 6m mean readius,used in drain, boundary wall,compound wall complete all as specified and directed by engr in charge. |
| 74 | Dismantling floor,hearth or wall tiling including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. |
| 75 | S&F vitrified ceramictiles 10mm thick (Square/rectangular) polished in dark shade, areaexc 0.42 Sqm but n exc 1.00 Sqm in floors (600mm x 1200mm)etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6etc complete all as specified and directed . |
| 76 | S&F vitrified ceramictiles 10mm thick (Square/rectangular) polishedin light shade, area n exc 0.36 Sqm(600mmX600mm) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 77 | S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shadeincluding 10 mm thick rendering in CM 1:4 complete all as specified. |
| 78 | Dismantling plain or corrugated steel sheeting any gauge,thickness,incl Nainital or similar pattern roof covering etccomplete all as specified. |
| 79 | S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 80 | Dismantling of wrought iron orMild Steelwork of any description complete all as specified and directed . |
| 81 | S & F joist, channel, angle, or tee sections,hollow tube fixed independently, with connecting plates, etc (cut to ordinary lengths i.e. with in 20 mm of the length indicated to Fe 410-W (Gde-E-250 quality-B) complete all as specified and directed. |
| 82 | M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel barincluding plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka.Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying 25mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand)using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:-(i)After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii)Additional reinforced TMT bars where incorporated in work and quoted rate is included 15 mm thick cement plaster in 1:4.(iii)Work to be carried out as in patches as directed by Engr-in-charge.(iv)Rate for steel scaffolding as directed to be included in quoted rate.(v) All demolished material removed from MOD land completely. |
| 83 | M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified. |
| 84 | Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner).Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:-(i)Adequate lap length shall be provided as per IS-456-2000.(ii)Reinforced TMT bars where incorporated in work will be paid under item no 4&5.(iii)The work shall be carried out upto four storied building with scaffolding. |
| 85 | S&F induction butt welded Stainless steel square/circular tubeetc fixed etccomplete all as specified and directed. |
| 86 | S& Fstainless steel stairs (framed) including stringers, treades, landing, balusters etc including cleats, brackets etc complete all as specified and directed. |
| 87 | S & F Brass 4 lever locks, cupboard, grade I, size 50 mm etccomplete all as specified and directed. |
| 88 | S&F Magnetic catcher for Wardrobe, Cub-boards Etc. |
| 89 | Supply and fixing in repair 6 mm thick PVC ply with suitable fully threaded steel screws etc on the backing of rack,drawer,cubboard,kitchen cabinet,racks,almirah partition under kitchen counter etcall complete as per direction of Engineer-in- charge. |
| 90 | Supply and fixing in repair 12 mm thick PVC ply with suitable fully threaded steel screws etc in partitions, boxes, shelves, racks and cupboard, kitchen cabinet, racks almirah partition under kitchen counter etc all complete as per direction of Engineer-in- charge. |
| 91 | Supply and fixing in repair 19mm thick both side balancing lamination factory pressed BWP marine grade ply as per IS 710 of brand Greenply / Century Ply / Duro in partitions, boxes, shelves, racks, almirah, cupboard and drawer including soft closing screwetc including necessary nails, screws etc, includingfixing2 mm thick PVC edge banding tape withhotglue by edge banding machine etc withneccesary auto closing spring loaded hinges (hydraulic type) complete as per direction of Engineer-in-charge. |
| 92 | Supply and fixing stainless steel fancyGrade 304 handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 93 | Supply and fixing heavyduty type telescopic drawer channels HETTICH or equivalent suitable length with necessary screws etc. complete as per approved and directions of Engineer-in- charge. |
| 94 | Schedule of Credit |
