Bharat Sanchar Nigam Limited-BSNL has published Tender For Civil Repair And Maintenance Works In Connection With Renting Out Of 1St Floor Of Bsnl Bhawan At Jorhat. Submission Date for this Tender is 06-10-2023. Building Work Tenders in jorhat Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | a).1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : a).1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. a).Cement mortar 1:4 (1 cement :4 coarse sand) |
| 5 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :a).200x10 mm |
| 6 | b).150x10 mm |
| 7 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a).125 mm |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. a).Twin rubber stopper |
| 9 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 10 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 11 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a).In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Precast terrazzo tiles 22 mm thick with graded marble chips of size upto12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1cement:4 coarse sand) : |
| 14 | a).Light shade pigment using white cement. |
| 15 | Precast terrazzo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand),jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : a).Light shade pigment using white cement. |
| 16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | 12 mm cement plaster of mix :a).1:4 (1 cement: 4 fine sand) |
| 18 | 15 mm cement plaster on the rough side of single or half brick wall of mix :a). 1:4 (1 cement: 6 fine sand) |
| 19 | 6mm cement plaster of mix: a). 1:3 (1 cement : 3 Fine sand) |
| 20 | Neat cement punning |
| 21 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 22 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. a) Two or more coats on new work. |
| 23 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : a). Water thinnable cement primer. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :a). Two or more coats on new work. |
| 25 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :a). Old work (one or more coats) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :a). One or more coats on old work. |
| 27 | Fixing chowkhatsi/c shutterin existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size),and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.a). Door chowkhats in profile section . |
| 28 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge.a). For door/ window/ clerestory window. |
| 29 | Renewing glass panes in aluminium windowsand refixing existing aluminium beading: a). Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 30 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. a). With cement mortar 1:4 (1 cement : 4 fine sand). |
| 31 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..a). In cement mortar |
| 32 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):a). From brick work in cement mortar |
| 33 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : a). Of area 3 sq. metres and below |
| 34 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 35 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:a) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 37 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 38 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.a). 10 litre capacity - White |
| 39 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :a) White solid plastic seat with lid |
| 40 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a).Flexible pipe i) 32 mm dia |
| 41 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 42 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.a) Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 43 | Providing and fixing PTMT urinal cock of approved quality and colour.a) 15 mm nominal bore, 80 mm long. 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall a) 15 mm nominal outer dia. Pipes. |
| 45 | b) 20 mm nominal outer dia. Pipes. |
| 46 | c) 25 mm nominal outer dia .Pipes. |
| 47 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :a) 25 to 40 mm nominal bore |
| 48 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a) 25 mm nominal bore |
| 49 | b) 40 mm nominal bore |
| 50 | Providing and fixing uplasticised PVC connection pipe with brass unions : a) 30 cm length i) 15 mm nominal bore |
| 51 | b) 45 cm length i) 15 mm nominal bore |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 53 | Providing and fixing PTMT bib cock of approved quality and colour.a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 54 | Providing and fixing PTMT stop cock of approved quality and colour.a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 55 | Providing and fixing PTMT pillar cock of approved quality and colour . a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 56 | Providing and fixing PTMT grating of approved quality and colour.a) Circular type. i) 100 mm nominal dia. |
| 57 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.a) 15 mm nominal bore with 30 cm length. |
| 58 | b) 15 mm nominal bore with 45 cm length. |
| 59 | Credit for the re-usable dismantled materialsincluding stacking , meassuring and disposal from the site and all as directed by the Engineer-In-Charge. a) Country burnt bricks |
| 60 | b) Wooden flush door shutter of 35 mm thick |
| 61 | c) Powder coated aluminium sections |
| 62 | d) 12mm thick laminated particle boards |
| 63 | e) Float glass of 5mm thick. |
| 64 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. a) 110 mm diameter |
| 65 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. a) Coupler i) 110mm |
| 66 | b) Bend 87.5° i) 110 mm bend |
| 67 | c) Shoe (Plain) i) 110 mm Shoe |
| 68 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110 mm |
| 69 | Cutting and uprooting of trees from the walls and roof of the building (both BSNL Bhawan and CTO building)including making good the walls etc as per the dirction of the E-in-C.(The rate inclusive ofall materials, scaffolding and labour required for the complete job. |
| 70 | Shifting of files & furniturescarefully belongs to Office Of theSE(Civil), from the 2nd floor of BSNL bhawan to the CTO building/TE Building at Malowali as the location identified by the Engineer-In-Charge including bundling of files and records and neatly stacked in position. |
| 71 | Shifting of files, furnitures & LOCKER carefully belongs to Estt Section & AO(Cash) from the 1st floorto the 2nd floorincluding bundling the files and record and neatly stacked in the position identified by the Engineer-In-Charge. |
| 72 | Cleaning of jungle in BSNL Bhawan/ CTO Compoundincluding disposal of rubbishes from the premises to the dumping ground beyond municipal area by mechanical transport . |
| 73 | Cleaning of Sintex water tanks over the terrace floor level including draining out the water and cleaning withwire brushes and approved disinfectants and all as directed by the Engineer-In-Charge. a) Water tank of Capacity 2000 litres |
| 74 | b) Water tank of Capacity 500 litres |
| 75 | Supplying and Fixing FLAG MAST at terrace level of BSNL BHAVAN, Jorhat with GI pipe of40 mm dia and minimum height of6.00 meter including makingnecessary hooks and rope arrangements for smooth hoisting of FLAG. The GI pipe shall be neatly painted with synthetic enamel paint of approved shade and brand. The cost shall be includes all operations and all as directed by the Engineer-In-Charge. |
| 76 | Cleaning the ceramic tile walls and floors of toilets including removing dirt, dust, grease, oil, algae, fungus etc, from tiles and providing, applying and washing the surface with required chemical cleaning agent of approved brand and manufacturer, with the help of required scrubbers and all as per direction of Engineerin- charge. |
| 77 | Cleaning of wash basin, W.C Pan (both Europuan & Indian closets), Urinal pan etc. including removing dirt, dust, grease, oil, etc, including providing, applying and washing the pans with required chemical cleaning agent of approved brand and manufacturer, with the help of required scrubbers and all as per direction of Engineerin- charge. |
| 78 | Cleaning and de-silting of open surface drain, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 79 | Cleaning of under ground sump of internal size 7mx4.5mx3.50m including emptying of water by pumping and bottom shall be cleaned of silt and other deposits and the surface area of the sump shall then srubbed thoroughly with wire brush etc. with necessary disinfectant materials like bleaching powder, lime etc. complete all as per the direction of the Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
