Indian Oil Corporation Limited-IOCL has published Tender For Renovation Of Guest House At Nrpl Rewari Township. Submission Date for this Tender is 13-10-2023. Building Work Tenders in rewari Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil |
| 2 | 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources] |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with : |
| 4 | 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources] |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain w indow sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 6 | 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources] |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplu s material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. |
| 9 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved. |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dump ing ground within 50 metres lead. |
| 11 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead. |
| 12 | For thickness of tiles 10 mm to 25 mm |
| 13 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : |
| 14 | Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the workarea shall be done prior to dismantling operations] |
| 15 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior todismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved bythe Engineer-in-Charge] |
| 16 | Of area 3.0 sq. metres and below |
| 17 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 18 | Of area beyond 3.0 sq. metres |
| 19 | Of area 3.0 sq. metres and below |
| 20 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete a nd stacking within 50 metres lead : |
| 21 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m. |
| 23 | In all kinds of soil |
| 24 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms including getting out the excavated soil and disp osal of surplus excavated soil, all works up to any lead and lift, as directed by the Engineer-in-Charge : |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level : |
| 26 | Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 28 | Suspended floors, roofs, landings, balconies and access platform |
| 29 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : |
| 31 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 32 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in : |
| 33 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 34 | 12 mm cement plaster of mix : |
| 35 | 1:6 (1 cement : 6 fine sand) |
| 36 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 37 | 1:4 (1 cement : 4 fine sand) |
| 38 | Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge. |
| 39 | Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for ho t & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inclu ding testing of joints complete as per directions of the Engineer-in-Charge : |
| 40 | 15 mm nominal dia pipes |
| 41 | 20 mm nominal dia pipes |
| 42 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 43 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 44 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete. |
| 45 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 gra ms/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : |
| 46 | Two coats |
| 47 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : |
| 48 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. |
| 49 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/ make, s hape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existin g P/S trap, complete in all respect as per directions of the Engineer-in-Charge. |
| 50 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C.of quality and make as approved by the Engineer-in-Charge. |
| 51 | Providing & fixing Angle Valve(Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent). |
| 52 | Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. includingcutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackl es etc. as per specifications and directions of the Engineer-in-Charge. |
| 53 | Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour,tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 54 | Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manufacturer) wit h water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 2 0 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the jointswith white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles willbe done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : |
| 55 | Size of Tile 600 x 1200 mm |
| 56 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : |
| 57 | Size of Tile 600x600 mm |
| 58 | Providing and fixing glazed screen printed border tile 75 mm wide having thickness 5 mm, of approved quality & make, in all shades, design and prints, in dado, over 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurr y @ 3.3 Kg/sq.m. including pointing with white cement mixed with pigment of matching shade, all complete as approved by the Engineer -in-Charge. |
| 59 | Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacture r) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, lai d on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tile s will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : |
| 60 | Size of Tile 600 x 600 mm |
| 61 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door fr ames, including replacement of hinges with screws, etc. as required, all complete as per the directions of Engineer-in-Charge. |
| 62 | Melamine polishing on wood work (one or more coat). |
| 63 | Providing and fixing 100mm wide Vertcal Fabric Blind system of VISTA/ MAC/ TRAC of approved make & shades complete along with standa rd accessories in required design/ shade as per manufacturer"s recommendations, specification and directions of the Engineer-in-Char ge. |
| 64 | NA |
| 65 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] : |
| 66 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to m atch the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 67 | Light shade pigment using white cement |
| 68 | For fixed portion : |
| 69 | Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 70 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] : |
| 71 | With float glass panes of 8.00 mm thickness |
| 72 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and s hade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour an d texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matc hing pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete atall levels : |
| 73 | Area of slab up to 0.50 sqm |
| 74 | Area of slab over 0.50 sqm |
| 75 | Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edge to give hi gh gloss finish etc. complete as per design approved by the Engineer-in-Charge : |
| 76 | Granite work |
| 77 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete. |
| 78 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 79 | Fastener with threaded dia 10 mm |
| 80 | Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for ho t & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inclu ding testing of joints complete as per directions of the Engineer-in-Charge : |
| 81 | 15 mm nominal dia pipes |
| 82 | Coupler (110 mm) |
| 83 | Single Push-fit Coupler (110 mm) |
| 84 | Single Tee without door (110x110x110 mm) |
| 85 | Bend- 87.5 Degrees (110 mm) |
| 86 | Shoe - Plain (110 mm) |
| 87 | Providing and fixing Unplasticised PVC (uPVC) pipe clips (110 mm) of approved design to unplasticised-PVC rainwater pipes by means o f 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 88 | Providing and fixing expansion hold fasteners (wedge expansion type) on C.C./ R.C.C./ Brick masonry surface backing including drilli ng necessary holes and the cost of bolt, etc. complete : |
| 89 | Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion : |
| 90 | 20 mm nominal dia pipes |
| 91 | Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in allrespects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge : |
| 92 | Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent) |
| 93 | Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge : |
| 94 | Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent) |
| 95 | Providing and fixing toilet paper holder : |
| 96 | C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent). |
| 97 | Electrical |
| 98 | Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC c opper wire from D.B. to switchboard as required is also in the scope of the contractor: 1 light point controlled by 1 switch |
| 99 | Decorative Light fittings - Supply, installation, connection, earthing and testing of the following fittings, including supply and i nstallation of drop pipes, hooks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other requir ed materials etc. as per specifications, drawings and directions of the Site Engineer including cost of all labour, tools, materialsetc. complete in all respects.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from t he approved make list given in the specifications:LED Ceiling Point: Supply and fixing of surface mounted LED ceiling light fitting type Mainstream spot Aura 15W of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, opti cs, thermal sink, connector blocks etc including installation. |
| 100 | PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. duringor after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 19 mm |
| 101 | Exhaust fan - Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greav es or of approved make fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and conne cting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications , drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete: 12" Sweep |
| 102 | Miscellaneous |
| 103 | Providing and Fixing Non-woven A grade Korean wallpaper having grammage Not less than 150gsm, Good lightfastness Low flammability St rippable Washable, in good aesthetics sense with good quality adhesive Note: Contractor shall present catalogue of wallpaper and fin al decision of selction of wallpaper will be of EIC |
| 104 | Wooden exterior decorative double Door of Size 2.4m*2.25m teak wood confirming to IS707 with melamine finish having 20 to 30% area b uild with decorative frosted glass, Minimum door thickness of 50mm. Chaukhats of minimum 5 inch wide with melamine finish. Including18inch full brass door handle inside and outside, Ball Bearing butt Hinges total 8 , 18" long tower bolts 2 , Double door attachmen t, Antique Brass Finish Lock,Door stopper, Door Closer of dorset DC 80 Ext(WP) etc All material of Godrej, Dorset or equivalent make , Note: Approval of door design shall be taken from EIC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
