Public Works Department-PWD has published Tender For Construction Of Building For Sub-Treasury Chrar-I-Sharief (Civil Works Only). Submission Date for this Tender is 07-10-2023. Building Work Tenders in Pulwama Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 2 | Providing and laying of stone soling 75mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used asper design mix is content considered payable or recoverable separately.All works upto plinth level |
| 7 | All works above plinth level upto floor V level |
| 8 | Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 11 | Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Columns pillars,piers abutment posts and struts |
| 14 | Stairs (excluding landings) except spiral staircases |
| 15 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto&above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Making Plinth protection 50 mm thick of cement concrete 1:3:6(1 Cement:3 Coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone soiling ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 18 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6 coarse sand) |
| 19 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in Super Structure including curing in :Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood |
| 21 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.4 First class kail wood |
| 24 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood |
| 25 | Providing and Fixing 3.5 mm thick glass panes including cost and fixing wooden fillets/beeding of required size and shape with nail including all carraiges complete |
| 26 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 27 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm |
| 28 | 100x10 mm |
| 29 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.150 mm |
| 30 | 100mm |
| 31 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper |
| 32 | Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job |
| 33 | Providing and laying vitrified floor tiles(Anti Skid) in different size(thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortor 1:4(1 cement:4 coarse sand)including grouting the joints with white cement and matching pigments etc.complete size of tile 300mmX300mm |
| 34 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixedslurry. |
| 35 | Providing and laying vitrified floor tiles(Anti Skid) in different size(thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortor 1:4(1 cement:4 coarse sand)including grouting the joints with white cement and matching pigments etc.complete size of tile 600mmX600mm |
| 36 | Tile work in skirting, risers of step and dedo upto 2 metre height, over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.32.1 Marble tiles (polished) Raj Nagar 8mm thick. |
| 37 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 38 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm) |
| 39 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work |
| 40 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 41 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 42 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 43 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinable cement primer on wall surface having VOC content less than 50 Gms per liter |
| 44 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 45 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 47 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 48 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 49 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. |
| 50 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm) |
| 51 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.25 mm thick with zinc coating not less than 350 gram/m2 |
| 52 | Providing and fixing plained eaves boarding 2nd class deodar wood 300x40 mm (nominal size) |
| 53 | Providing and fixing of soffits made out of 12mm thick Badloo wooden planks plained finished, including underneath frame work of badloo wood including cost of primer and two or more coats of paint including all cost of labour,material,scaffolding etc complete job |
| 54 | Providing and fixing PVC Pipe and fitting of prince or other approved brand(type-B) including cost of labour charges for cutting of wall/floor incl laying in proper gradient and fixing in position complete job |
| 55 | 75 mm dia pipe |
| 56 | Floor Trap 75 mm |
| 57 | Tee Door Bend 75 mm |
| 58 | Plain bend 75 mm |
| 59 | Collar 75 mm |
| 60 | 100 mm dia pipe |
| 61 | Plain Bend 100 mm |
| 62 | Door Bend 100 mm |
| 63 | Tee Bend 100 mm |
| 64 | Collar 100 mm |
| 65 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 32mm OD(SDR-7.4) |
| 66 | PPR Ball Value 32 mm OD |
| 67 | Tanky Nipple 32 mm OD |
| 68 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :470x420mm bowl depth 178mm Complete job |
| 69 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 70 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 72 | Providing and fixing CP fittings of approval make incl. cost of fixing material/Labour/Carraige complete job(15 mm Inner bore dia) |
| 73 | Angle Value(Cera/Parko/Hindware) |
| 74 | PVC Connection 18-24"15 mm dia |
| 75 | Steel Cover Tube type connection18-24" |
| 76 | PVC waiste pipe felexible |
| 77 | Urinal PVC Pipe |
| 78 | CP Soap Case |
| 79 | CP Grating |
| 80 | CP Sink Waste |
| 81 | Wall Mixer(Cera/Parko/Hindware) |
| 82 | Sink Mixer(Cera/Parko/Hindware) |
| 83 | CP Cup |
| 84 | CP Nipple 25mm(2" Long) |
| 85 | Towel Ring 300mm |
| 86 | Health Faucet with 1m chain |
| 87 | Bib Cock 2 in 1 15mm dia(Cera/Parko/Hindware) |
| 88 | Bib Cock15mm dia(Cera/Parko/Hindware) |
| 89 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 90 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 91 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 92 | Providing /Installing/Testing of water heater(gyser)make of 50 litre capacity incl. all fixtures & fittings |
| 93 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 94 | Providing and fixing ready made CC rings for soakage incl.RCC top slab as per direction of EIC incl. cost of labour for laying down fixing in position including excavation of earthworkcomplete job 4 feet dia and 15 feet depth |
| 95 | Construction of septic tank in brick work having 6" cement concrete floor 1:2:4 over a bed of 6 inch thick stone soilingbrick wall of 9" and RCC slab 6" thick on top with 1:2:4 mix incl. internal plaster with 1:6 ratio Complete job septic tank size 10"x5"x6" incl.excavation of earthwork/its disposal and all carraiges head loads etc complete job |
| 96 | Providing and fixing Electric Motor water lift pump 01 HP of standard qualityincl all necessary fittings and fixtures to join inlet and out let complete job |
| 97 | Construction of main hole chambers in brick work 1:6 miand 750mmx750mmx600mm deep incl 12mm thick plater and PVC cover of require size complete job |
| 98 | Carraige of Stone aggregate for an Avg lead of 31 Km(Aathwajan) |
| 99 | Carraige of Sand for an Avg lead of 26 Km(Marwal) |
| 100 | Carraige of Brick for an Avg lead of 20 Km(Gadsathoo) |
| 101 | Boundary Walling |
| 102 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil |
| 103 | Providing and laying of stone soling 75mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete. |
| 104 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 105 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 106 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level(1:1.5:3)(1 cement:1.5 Coarse sand:8 graded stone aggregate) 20mm aggregate |
| 107 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 109 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT bars of grade Fe-500D or more |
| 110 | Brick work with common burnt clay non Modular bricks of class designation 7.5. in n Superstructure above plinth level upto floor five level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete in with non modular bricks |
| 111 | Half Brick work with common burnt clay non Modular bricks of class designation 7.5. in n Superstructure above plinth level upto floor five level in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and curing complete in with non modular bricks |
| 112 | Providing and laying damp-proof Course 75 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 113 | Providing and fixing of iron metal Gate of size 12"x9" of approporate design and specification including priming coat and hold fast etc complete job |
| 114 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 115 | Carraige of Stone aggregate for an Avg lead of 31 Km |
| 116 | Carraige of Sand for an Avg lead of 26 Km |
| 117 | Carraige of Brick for an Avg lead of 20 Km |
| 118 | Improvement/Upgradation of Road Surface |
| 119 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 120 | Spreading Laying and Consolidation of GSB upto site of work placing watering and rolling with 8-10 tonns capacity road roller in layers complete |
| 121 | Supplying and stacking at siteGraded crushed stone aggregate of size 63 mm to 45 mm |
| 122 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. |
| 123 | Supplying and stacking at siteGraded crushed stone aggregate of size 13.2 mm nominal size (Type A) |
| 124 | Supplying and stacking at site Moorum |
| 125 | Carraige of Stone aggregate for an Avg lead of 10 Km |
| 126 | Stone Screening & Moorum For an Avg lead of 10 Km |
| 127 | Earthwork with an Avg lead of 2 Km |
| 128 | Electric Part |
| 129 | Supplying and fixing of following sizes of medium class PVC Conduit along with necessary boxes/ accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 130 | 20 mm |
| 131 | 25 mm |
| 132 | 32 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
