|
| 1 | SCHEDULE `A\" PART -I (BUILDING WORKS) SPL REPAIR T-V BLDG, 8 AR (CHASSAD) Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under,including cutting the patch in proper shape ,raking out joints and preparing and plastering the surface of walls complete,including disposal of rubbish to the dumping ground,all complete as per direction of engineer in charge with cement morter 1:4 (1 cement : 4 fine sand) |
| 2 | Wiring for 5 A socket outletwiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for independent. Make : Havells/Ancher/Rich/ V-Guard equivelent ISI Mark as per direction of Engr-in-charge |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Make : Havells/Ancher/Rich/ V-Guard equivelent ISI Mark as per direction of Engr-in-charge |
| 4 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old surface providing one or more coats. |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete. |
| 6 | Providing wood work in frames of doors,windows,clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length(hold fastener shall be paid for separately)Secound class teak wood. |
| 7 | Providing corrugated G.S sheet roofing including vertical /curved surface fixed with polymer coated J or L hookes,bolts and nuts 8 mm diameter with bitumin and G.I limpet Primer and two coats of approved steel primer and two coats of approved paint on overlapping of sheets complete(up to any pitch in horizontal/ vartical or curved surface),excluding the cost of purlins,rafter and trusses and including cutting to size and shap wherever required,0.63 mm thick with zinc coating not less then 275 gm/m |
| 8 | Providing and fixing plain multipurpose Cement board (High Pressure steam cured)as per IS:14862,with suitable screws for fibre cement board in ceiling etc.complete(frame work to be paied separately),6 mm thick. |
| 9 | Renewing glass panes and refixing exixting wooden fillets ,float glass panes of thickness 4 mm. |
| 10 | 35 mm thick factory made solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5mm (+- 0.2 mm) thick,having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be falat and 20mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement self driven self tapping screws & M.S rectangular pipes bracket of size 190 mm x 100 mm of cross section 35 mm x 17 mm x 1 mm at each corner, Single piece extruded 5 mm thick solid PVC Lock rail size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 156 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screw of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacture\"s specification and direction of Engineer-in- charge. |
| 11 | Providing and fixing cup bord shutter 25mm thick, with Pre-laminated flat pressed three layer partical board or gradded wood partical board IS:12823 marked, exterior grade ( Grade I Type II), having one side decorative laminitation and other side blancing lamination, including llnd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screw and bright finished stainless piano hinges, complete as per direction of the Engineer in charge. |
| 12 | Fixing chowkhats in existing opening including embedding chowkhats in floor or wall cutting masonary for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 20 mm nominal size ),painting two coats of approved wood presevative to sides of chowkhats and making good the damage towall and floor as required complete,including disposal of rubbish to the dumping ground within 50 m lead . - Door chowkhats |
| 13 | -do-but window chowkhats |
| 14 | Taking out door,window and clerestory windows and clerestory window shutters wood including stacking within 50 meters lead of area 3 sq. metres and below |
| 15 | -do- but of area beyond 3 sq. metres |
| 16 | Dismantling stone slab flooring laid in cement morter including stacking of serviceable material and disposal of unserviceable material within 50 m lead. |
| 17 | Providing and fixing wash basin with C.I bracket,15 mm C.P brasspillar taps,32 mm C.P brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls white Vitreous China Wash basin size 630 x 450 nn with pairs of 15 mm C.P brass pillar taps. |
| 18 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen sink as per IS :13983 with C.I bracket and stainless steel plug 40 mm, including painting of fittings and bracket,cutting and making good the wall 510 x 1040 mm bowl depth 225 mm. |
| 19 | Providing and fixing P.V.C wast pipe for sink or wash basin including P.V.C wast fittings complete 32 mm dia. |
| 20 | SCHEDULE `A\" PART -II (ELECTRIFICATION WORK) RE-WIRING T-V ACCN AND SM BK, 8 AR (CHASSAD) Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor SC cable and 1\"5 sqmm FRLS PVC insulated copper conductor SC cable as earth wire in existing surface/recessed steel/PVC conduit incl dismantling as required Group C. |
| 21 | Wiring for light /power plug with 2 x 4 sqmm FRLS PVC insulated copper conductor SC cable in surface/recessed steel conduit alongwith 1 No. 4 sqmm FRLS PVC insulated copper conductor SC for loop earthing as required. |
| 22 | Supply and fixing following piano type switch/socket on the existing switch box/cover incl connections etc as required -5/6 amps switch |
| 23 | - do- but 15/16 amps switch |
| 24 | - do- but 6 Pin 5/6 amps socket outlet |
| 25 | - do- but 6 Pin 15/16 amps socket outlet |
| 26 | Supply and fixing PVC batten/angle/pendant holder incl connectionc etc as reqd |
| 27 | Supply and fixing LED bulb 7/9 W incl connectionc etc as reqd |
| 28 | Supply and fixing LED tube set 18/20 W incl connectionc etc as reqd |
| 29 | Supplying and fixing 3 pin, 5 A ceiling rose on the exisitng juction box/wooden block incl connections etc as reqd. |
| 30 | Supplying and fixing incl testing, commissioing of ceiling Fan 1200 mm incl wiring the down rod of standard length (upto 30 cm) with 1.5 sqmm FRLS PVC insualeted copper conductor SC cable etc as reqd. |
| 31 | Supplying and fixing incl testing, commissioing of exhaust fan 300/350 mm with 1.5 sqmm FRLS PVC insualeted copper conductor SC cable etc as reqd. |
| 32 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incl painting etc as reqd -250mmx300mm x 100 mm deep |
| 33 | - do- but 200mmx250 mm x 100 mm deep |
| 34 | - do- but 100 mm x 100 mm x 60 mm deep |
| 35 | Supplying and fixing call bell/buzzar suitable for single phase 230 V incl bell push, complete as reqd. |
| 36 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, \"C\" curve, MCB for inductive load of SP in the exisitng MCB DB complete with connections, testing and commissioning etc as reqd : |
| 37 | Supplying and fixing 63 A rating, double pole, 240 V, Isolator in the existing MCB DB complete with connections, testing and commissioining etc as reqd. |
| 38 | Supplying and fixing 12 ways, double door, single pole and neutral , sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neatral bus bar, earth bar, din bar, interconnections , powder painted incl earthing etc as reqd (But w/o MCB/Isolator). |
| 39 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric powre cable (heavy duty) with stranded aluminium conductor, 11000 volts grade of size 3 core 35 sqmm |
| 40 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick incl accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with charcoal/coke and salt as reqd. |
| 41 | Supplying and laying 6 SWG GI wire at 0.50 mtr below ground level for conductor earth electrode incl connection/termination with GI thimble etc as reqd. |
| 42 | Supplying and fixing on load changeover switch 415 V in sheet metal enclosure 4 pole of capacity 63 Amp |
| 43 | SCHEDULE `A\" PART -III (ELECTRIFICATION WORK) RE-WIRING OF MD ACCN 35 AR, SOMSAI Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic aminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Make : Havells/Ancher/Rich/ V-Guard equivelent ISI Mark as per direction of Engr-in-charge (a) Tube light - 86 (b) Hoder -248 (c) Fancy light - 80 (d) Bulk head - 60 (e) Fan - 86 (f) Exhust fan - 30 (g) Call Bell -30 (h) 5 A Socket (on the same bd) - 68 |
| 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Make : Havells/Ancher/Rich/ V-Guard equivelent ISI Mark as per direction of Engr-in-charge |
| 45 | Supply, Installation, testing and commissioning of 1200mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.Make : Havells/Bajaj/Polar equivelent ISI Mark as per direction of Engr-in-charge |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Make : Havells/Ancher/Rich/ V-Guard equivelent ISI Mark as per direction of Engr-in-charge |
| 47 | Supply, Installation, testing and commissioning of 1200mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.Make : Havells/Bajaj/Polar equivelent ISI Mark as per direction of Engr-in-charge |
| 48 | Supply, Installation, testing and commissioning of 250mm sweep exhust fan, with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.Make : Havells/Bajaj/Polar equivelent ISI Mark as per direction of Engr-in-charge |
| 49 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Make: Havells/Ancher equivelent ISI Mark as per direction of Engr-in-charge |
| 50 | Supplying and fixing brass batten/ angle holder including connection etc. as required. Make: Havells/Ancherequivelent ISI mark as per direction of Engr-in-charge |
| 51 | Installation, testing and commissioning of pre-wired, LED tube light 30w compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 52 | Supply, Installation ,Testing, Commissioning of LED fency light per fitting, complete with all accessories including connections etc. as required Make : Havells/Bajaj/Standard equivelent ISI mark as per direction of Engr-in-charge |
| 53 | Supply, Installation ,Testing, Commissioning of LED Bulk head light per fitting, complete with all accessories including connections etc. as required Make : Havells/Bajaj/Standard equivelent ISI mark as per direction of Engr-in-charge |
| 54 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Make: Havells/Ancher/Bajaj equivelent ISI Mark as per direction of Engr-in-charge |
| 55 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make: Havells/Ancher equivelent ISI Mark as per direction of Engr-in-charge. |
| 56 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 57 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch Make: Havells/Ancher equivelent ISI Mark as per direction of Engr-in-charge. |
| 58 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 A switch Make: Havells/Ancher equivelent ISI Mark as per direction of Engr-in-charge. |
| 59 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 A socket outlet Make: Havells/Ancher equivelent ISI Mark as per direction of Engr-in-charge. |
| 60 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet. Make: Havells/ Ancher equivelent ISI Mark as per direction of Engr-in-charge. |
| 61 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Bell push. Make: Havells/Ancher equivelent ISI mark as per direction of Engr-in-charge. |
| 62 | Supplying and fixing Single pole 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells/Ancher/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 63 | Supplying and fixing 25 A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells/Ancher/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 64 | Supplying and fixing 40 A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells/Ancher/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 65 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door |
| 66 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB Distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door |
| 67 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 68 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 69 | Providing and fixingcapacity 32 A TP&N TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. |
| 70 | Providing and fixingcapacity 100 A TP&N TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. |
| 71 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core for service connection. (Note:Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.) |
| 72 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core for Genr connection (Note:Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.) |
| 73 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3½ core for service connection. (Note:Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.) |
| 74 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core for service connection. (Note:Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.) |
| 75 | Providing and fixingcapacity 100 A, 4 way Busbar chambers (wall mounted) inside the existing panel board with ISI marked including drilling holes in cubicle panel, making connections, etc. Make: Havells/Ancher/L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 76 | Supplying and fixing double pole 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells/Ancher/L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 77 | Supplying and fixing double pole 63 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells/Ancher/L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. Make: Havells/Ancher//L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 78 | Supply and fixing 4 Pole MCCB160 Amp, 50 Hz, 415 V with rupturing capacity 35 KA. Make: Havells/ Ancher//L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 79 | Supply and fixing 4 Pole MCCB200 Amp, 50 Hz, 415 V with rupturing capacity 35 KA. Make: Havells/ Ancher//L&T/Legrand equivelent ISI mark as per direction of Engr-in-charge. |
| 80 | Supply and fixing 63 A/415V Kit Kat Rewirable (Porcelain Fuse carrier & Base) specification : IS 2086 Make : Havellas ISI mark. |
| 81 | Supply and fixing 100 A/415V Kit Kat Rewirable (Porcelain Fuse carrier & Base) specification : IS 2086 Make : Havellas ISI mark. |
| 82 | Supply and fixing 200 A/415V Kit Kat Rewirable (Porcelain Fuse carrier & Base) specification : IS 2086 Make : Havellas ISI mark. |
| 83 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 2 X 10 sq. mm (19mm) |
| 84 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV, 3½ X 35 sq. mm (32mm) |
| 85 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm |
| 86 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm |
