Assam Rifles-AR has published Tender For Special Repair/Periodical Services Of Existing Single Men Barrack , Type-2, Type-3, Type-4 And Type-5 Qtrs At Key Location Plan Of Assam Rifles Modi. Submission Date for this Tender is 16-10-2023. Barrack Tenders in Tengnoupal Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART - I (Repair of buildings) |
| 2 | Demolishing cement concrete richer mix manually/ by mechanical means including disposal of material within 50 m lead. |
| 3 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 4 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) in retaining walls, parapets, bed blocks, anchor blocks, plain window sills, sunken floor etc, up to floor five level. |
| 5 | Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) in retaining walls, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floor etc, up to floor five level. |
| 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados cover 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, With cement mortar 1:4 (1cement: 4 coarse sand) including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 m lead up to 10m height. |
| 9 | M/L for Cement concrete flooring with 1:2:4,up to 40 mmthick using to 20 mm size stone aggregate including finished with a floating coat of neat cement. Complete work. |
| 10 | Distempering with 1st quality acrylic distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primer on New surfaces, two or more coats complete. |
| 11 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 12 | Distempering with 1st quality acrylic distemper of approved brand and manufacture to give an even shade on old surface one or more coats on Old work including removing dry or oil bound distemper and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete work. |
| 13 | M&L for finishing walls with Premium Acrylic Smooth exterior paint one or more coats and including with Removing dry Old painted surfaces and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete work. |
| 14 | M/L for painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coat on old surfaces. |
| 15 | M/L for Renewing 4mm thick float glass panes with putty and nails wherever necessary including racking out old putty complete. |
| 16 | Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. |
| 17 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitered at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 18 | Providing and fixing 30 mm thick factory made solid/Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitered and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced byinserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. "U" cleats. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, including ISI marked aluminium butt hinges with necessary screws, complete as per manufacturer"s specification and direction of Engineer-in-charge. |
| 19 | Providing and fixing 125mm long aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 20 | Providing and fixing 150x10mmaluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 21 | Demolishing R.C.C. work manually/ by mechanical means including cutting/stacking of steel bars make the surface smooth and disposal of unserviceable material within 50 m lead as per direction of Engineer - in- charge complete. |
| 22 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge |
| 23 | M/L for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work complete. |
| 24 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 25 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for wash basin, WC and geyser points of approved quality. |
| 27 | Providing and fixing in position UPVC full bore P/S trap with 50mm water seal (IS:14735) of the following size. Making proper connection with solvent cement with 110mm "L" bend complete all as specified. |
| 28 | Providing and fixing 125 mm nominal dia with 25 mm waste hole PTMT grating of approved quality and colour complete. |
| 29 | Providing and fixing in repair G.I. pipes 15mm dia nominal bore complete with G.I. fittings and clamps, i/c cutting and making good the walls etc complete all as specified. |
| 30 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 (with 20mm graded stone aggregate), foundation concrete 1:4:8 (with 40mm graded stone aggregate), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neatcement and making channels in cement concrete 1:2:4 with 20mm graded stone aggregate finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). |
| 31 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design bricks of class designation 7.5 complete. |
| 32 | SCHEDULE ‘A’ PART - II (Internal Electrifications) |
| 33 | S&F for point wiring with PVC cashing capping ,with modular type switch wiring for light /ceiling fan/exhaust fan/ call bell point/ 5amp point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate phenolic laminated sheet, suitable size GI box and earthing the point with 1.5 sqmm . FR PVC insulated copper conductor single core cable ect. as required group A. |
| 34 | S&F for Angle/Batten holder for LED, metal cased body of brass with back plate suitable fitting. |
| 35 | S&F for concealed power plug wiring with PVC conduit (2x2.5 sqmm+1 X 2.5 sq. mm earth wire) FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with earthing the point with 1.5 sqmm . |
| 36 | S&F for modular type 6 amp switch & socket 3 pin outlet including connections etc complete wk. |
| 37 | S&F for concealed power plug wiring with PVC conduit (2x4 sqmm) FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with earthing the point with 1.5 sqmm . |
| 38 | S&F for modular type 16 amp switch & socket 6pin outlet including connections ect complete work. |
| 39 | S&F for modular plate along with GI box 4 modular base & cover plate for modular switches in recess ect. Complete work. |
| 40 | M/L for ceiling rose, surface bakelite, 65x50 mm, two to three terminals. |
| 41 | S&F for modular type electronic fan regulator on the existing modular plate switch box including connections etc complete work. |
| 42 | Installation, testing and commissioning of ceiling fan including wiring the down rods with 1.5 sqmm FR PVC insulated copper conductor single core cable etc complete work. |
| 43 | M&L for Fan hooks made out of 16mm dia MS Rod |
| 44 | S/F MCB single pole 32 amps rating, 240/415 volts, circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 45 | - Ditto - but MCB single pole 32 amps with neutral . |
| 46 | S/F DBS sheet metal enclosures for MCB to be used 2 + 6 way, Single door with bus bar. |
| 47 | Supply & installation, testing and commissioning of 63 amp DP MCB isolator. |
| 48 | Supply & installation, testing and commissioning of earthing with G.I. earth plate 600X600X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required etccomplete work. |
| 49 | Supply & installation 25mmx5mm GI earth strip in and on surfaces for connection including soldering etc complete work. |
| 50 | M/L for twin core PVC insulated sheathed copper conductor 2x2.5 sq mm + 1x2.5 Sqmm earth wire in PVC casing capping in Sub Main. |
| 51 | Supply & Fixing of fluorescent tube light fitting 1 tube (1x36w) industrial batten type, powder coated top cover including electronic chock, bipin holder, elect complete fitting 4” long excepts tube rod of standard make including provn of cable from ceiling rose a connect ect (Havells/Bajaj/Philips). |
| 52 | SCHEDULE ‘A’ PART - III (Repair of Septic Tank) |
| 53 | Earth work in excavation in trenches not exe 1.50 m deep and wide and getting out hard/ dense soil |
| 54 | - Ditto-but beyond 1.50 m depth and upto 3.00 mtr |
| 55 | M/L for PCC (1:4:8) type D2 in fdn filling and mass concrete |
| 56 | M/L for PCC (1:2:4) type B2 50 MM thick with 3% WPC |
| 57 | Returning filling in incl. spreading, leveling, watering and well ramming in layers. |
| 58 | Removing excavated materials not exe. 50 mtr and depositing where directed |
| 59 | M/L brick work in CM 1:4 (1 cement : 4 coarse sand) with sub class "B" bricks. |
| 60 | M/L for RCC (1:2:4) type B1 in baffle wall |
| 61 | M/L for RCC(1:2:4)type B1 in cover slab |
| 62 | M/L for precast RCC 1:2:4 manhole cover, set in cement sand mortar 1:4 (1 cement : 4 coarse sand). |
| 63 | Use and wastage of form to soffits of cover slab, fair finished. |
| 64 | - Ditto - but sides of cover slab |
| 65 | - Ditto-but to sides of baffle wall. |
| 66 | Providing and fixing of Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level of TMT bar. |
| 67 | Providing and fixing soil, waste and vent pipes 75mm dia Sand cast iron S&S pipe with vent cowl. |
| 68 | Providing, laying and jointing glazed stoneware pipes 150 mm diameter including testing of joints etc. complete in any length for inlet and outlet |
| 69 | M/L for 20 m thick cement plaster in CM 1:3 (1 cement : 3 coarse sand) internally with 3% WPC & floating coat of neat cement finiing. |
| 70 | M/L -ditto- but 15mm thick in CM 1:4 |
| 71 | Supply only water proofing compound |
| 72 | SCHEDULE ‘A’ PART - IV (Repair/Periodical Services of Type -II, Type-III, Type - IV and Type - V quarters) |
| 73 | Materials and labour for white washing two or more coats with lime to give an even shade on old work. |
| 74 | Materials and labour for Distempering with 1st quality acrylic distemper of approved brand and manufacture to give an even shade on old surface one or more coats on old work including removing dry or oil bound distemper and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete work. |
| 75 | M&L for finishing walls with Premium Acrylic Smooth exterior paint one or more coats and including with Removing dry old painted surfaces and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc, 1st Quality of approved make complete work. |
| 76 | M&L for painting with plastic emulsion paint of approved brand and manufacture to give an even shade on old surface one or more coats on old work including removing old layer of existing paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete work. |
| 77 | M/L for painting with synthetic enamel paint of 1st quality approved brand and manufacture of required colour to give an even shade, one or more coat on old surfaces. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
