Military Engineer Services-MES has published Tender For Special Rep To Building No T-1 &T-2 Near Beacher Road Under Ge Dehradun.. Submission Date for this Tender is 23-10-2023. Building Work Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-10-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugate ted, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based tile profile corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering,ridge, cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed. |
| 4 | Dismantling of wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 5 | S&F formild steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240complete all as specified and directed. |
| 6 | M&L for applying two coats of synthetic enamel paint onnew or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed. |
| 7 | M&L for non skid/mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mmthick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 8 | M&L for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existingtiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 9 | M&L for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existingwall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 10 | M&L for vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor / skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specifiedand directed. |
| 11 | M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors,skirting etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling old unserviceable tiles complete all as specified and directed. |
| 12 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed. |
| 14 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed. |
| 15 | M&L for 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified and directed. |
| 16 | M&L for 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite and demolition of existing stonecomplete all as specified |
| 17 | M&L for heavy duty dura stone Skid proof vitrifiedcolouredceramic tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 18 | Taking down shutter of any description, exc. 1 Sqm but n. exc. 2 Sqm each and removing from site complete all as specified |
| 19 | Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 20 | All as per item No 19 here in above but exc. 1.5 Sqm and not exceeding 4 Sqm each complete. |
| 21 | S & F second class hardwood (Golden Teak) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 22 | S & F 35mm thick IInd class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified and directedin SSR Pt I-2009 section 8 clause 8.24 (a). |
| 23 | M&L for 35mm thick 1st class teakwood plain fancy, framedpaneled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 25 | S&F factory made 100% solid wood plastic composite (WPC) door frame of size 125 mm x 65 mm x 50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. |
| 26 | S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified. |
| 27 | S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. |
| 28 | "S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 29 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 30 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed. |
| 31 | S&F in repair for powder coated aluminium window alloy coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type with aluminium sections as per series -A (15mm)3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4m thick , fixed with glazing clips, rubber beading / gasket anodised beading, srew and lock type handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed.shutter Top & bottom size :37.50x15x1.60mm, shuter inner lock size 37.50x15x1.60mm, chowkhat bottom size 50.30x26x1.20mm, chowkhat top & size 50x30x26x1.00mm and making good of wall surface with matching to existing surfaces, including grill with frame fixed to by means stainless steel screws complete all as specified and directed. |
| 32 | S&F in repair for powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fitting, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old/ ventilator and making good of wall surface to match with existing surface complete all as specified and directed. :-aluminium section shall be of size as given below: Frame:- 44.5x44.5mmx 1.08mm thick, Top/ bottom rails and middle / side stylesof shutter - 44.5x 44.5 mm x 1.08 mm thick Including Glass: 5 mm thick frostedglass fixed with rubber gasket with aluminium beading, necessary aluminium beading, wire gauge including aluminium grill with frame fixed to by means stainless steel screwscomplete all as specified and directed. |
| 33 | S&F in repair for powder coated aluminium partition (fixed) made out of aluminium powder coated section 83x 44.45 x 2.00 mm including 5mm thick glass/ACP sheet complete with rubber packing /aluminum beading etc including dismantling of existing structure complete all as specified and directed. |
| 34 | S&F in repair aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one door closer,one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Titz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper panel and partly paneled with 12 mm thick both side laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw,complete all as specified and directed.at site. Chowkhat frame : 101.60x44.45x1.60mm, Shutter vertical style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm |
| 35 | S&F in repair 12mmthick toughened glass door of size as required at site includingof coating ofwork film as required on one side including two Nos handle,one lock, double action floor spring hydraulically regulated made up of minimum 1.25 thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy suitable for toughened glass door upto 80 Kg weight, with top and bottom SS pivot, having corrosion resistance galvanized steel housing, High grade cast iron mechanism body with SS cover plate, other parts made of MS, heavy duty, ISI markedand other accessories complete for hanging door completeall as specified and directed |
| 36 | S&F factory fabricated steel window with side hung shutter ( double shutter) external shutter shall be provided glazing bar and internal shutter shall be without glazing bar ( mosquito proofing) steel window provided with box type hinges, guard bar/grill 10mm square bar shall be provided in external frame, 2 nos peg stay shall be provide with external shutter, 2 nos MS handle shall be provide each shutter, steel window shall be provide with shop coat painting before fixing, all welding shall be flush butt welded, steel window shall be procured from IS approved manufacture, including taking down old steel window complete all as specified and directed.Note :-Sample and design of steel window shall be approved by Garrison Engineer before execution of work |
| 37 | S &F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified and directed. |
| 38 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 39 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 40 | S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 42 | M&L for mild steelframed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering.doors, etc to be prepared for hanging or sliding complete all as specified and directed. |
| 43 | S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified and directed. |
| 44 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 45 | S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and directed. |
| 46 | S & F stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified and directed. |
| 47 | S & F stainless steel butt hinges, medium weight 75 mm long one piece and fixed with screws/welded to frame,complete all as specified and directed. |
| 48 | S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame,complete all as specified and directed. |
| 49 | S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame,complete all as specified and directed. |
| 50 | S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame,complete all as specified and directed. |
| 51 | S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed. |
| 52 | S & F in 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed. |
| 53 | S & F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed. |
| 54 | S&F in repair factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cilica ply 18mm thick and fixed with frame.The thickness of shutter is edges painted by matching colour of PVC lining ofplain/prelim coloured PVC sheet using etc complete as per manufacture specification. |
| 55 | All as per ser item No 54 here-in-above but 12mm thick as in cupboard drawer, complete all as specified. |
| 56 | S & F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed. |
| 57 | S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degreefor kitchen cabinet shutters stainless steel complete all as specified and directed. |
| 58 | S & F100 mm long Extruded Brass handles, fabricated type, polishedcomplete all as specified and directed. |
| 59 | S&F cup board / drawer knob of stainless steel with matt finish fixed with screw, complete all as specified and directed. |
| 60 | S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 61 | S&F multipurpose lock with double keys, suitable for cup board door/ drawer, complete all as specified and directed. |
| 62 | S&F hasp and staple 100mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 63 | S&F telescopic type ball bearing slide & runner, suitable for drawers complete all as specified and directed. |
| 64 | S&F stainless steel handle fancy type 100 mm size for kitchen cabinet shutters complete all as specified and directed. |
| 65 | Supply and fixing PVC sheet wall paneling of thickness 5 mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners.The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for aesthetic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall, complete all as specified and directed. |
| 66 | S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends as per approved sample complete all as specified and directed. |
| 67 | S & F in repairs venetian blinds roller type, made out of fabric cloth of approved printed and exclusive shade, fixed as per the instructions of manufacturers and all as specified. |
| 68 | M&L for applying two coats of Synthetic paint on newwooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified |
| 69 | M&L for preparation of old painted surfaces of wood &wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified |
| 70 | M&Lfor RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja, cover slab and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed. |
| 71 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT)complete all as specified and directed. |
| 72 | M&L Form work for RCC Slab any description such as kitchen slab, roof, chajja, colums, lintel, floor etc. complete all as specified and directed. |
| 73 | Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed. |
| 74 | Taking up or down steel tubing and connection incl removal from site bore of pipe 20mmcomplete all as specified and directed. |
| 75 | S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed. |
| 76 | All as per item No 75 above but 20mm dia bore. |
| 77 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 78 | Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 79 | S&F in repair sinksmade of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or includingcantilever brackets of suitable angle iron,CP brass waste coupling,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 80 | S & F in repairs, vitreous Chinawash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed. |
| 81 | S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 82 | S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 83 | S&F in repair vitreous china Wash Basin counter Top of size 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed. |
| 84 | S&F in repair brass chromium platedoverhead shower with shower arm complete all as specified and directed. |
| 85 | S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 86 | S&F in repair 15mm bore Bib taps long bodycast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 87 | S&F 15mm bore chromium plated fancy type two way bib tap ofcast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed. |
| 88 | S&F in repair CP Health Faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 89 | Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed. |
| 90 | S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provision with connecting legs & flanges complete all as specified and directed. |
| 91 | S&F in repair 15mm dia CP brass chromium plated Central hole basin mixer with accessories in wash basin for fixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified and directed. |
| 92 | S&F in repair looking mirrorin size (450 X 600mm) mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed. |
| 93 | S&F 5mm thick Fancy type looking mirror fixedto wall with teakwood beading complete all as specified and directed. |
| 94 | S&F of heavy dutyfancy type 6-8 lever mortice lock vertical type 100mm size, 3 pin with two keys with SS natural matt finish body with SS matt finish lock handles, complete all as directed. |
| 95 | S&F in repair 20mm dia brass chromium plated tubularTowel Rail 600mm Long,Stainless Steel complete all as specified and directed. |
| 96 | S&F in repair 32 mm Waste fittings /coupling brass, chromium plated forwash hand basin, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed. |
| 97 | Supply and fix in repair 32 mm dia PVC waste pipe forWHBand sink 90 cm long with union, complete all as specified and directed. |
| 98 | S&F in repair soap dispenser with glass bottle complete all as specified and directed. |
| 99 | S&F in repair Tumbler Holder complete all as specified and directed. |
| 100 | S&F in repairs vitreous chinaware wash downwater closet pan (Pedestal pattern) fancy type including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings "P" or "S" trap complete all as specified and directed. |
| 101 | S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres triple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 102 | S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres triple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 103 | S &Fball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed. |
| 104 | Providing & fixing false ceiling Perforated Acoustic GYPboardtile Ivory paintedDesigner(High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or Electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross "T" of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c toform a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main "T", bottom exposed width of 15mm of all "T"" sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per directed. |
| 105 | S&F Gypsum False ceiling comprising of 12 mm thick particle board / Gypsum board medium density, flat pressed single layer type or three layer type / Gypsum board placed on and including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( n.exc 1.2 m length) of 0.55 thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete making good disturbed wall surfaced with POP and oil emulsion distemper two coats complete all as specified and directed. |
| 106 | M&L formaking20-25 mm thick POP moulding/cornices of size exc 75mm but nexc 150 mm of approved design including two coats of plastic emulsion paint complete all as specified and directed. |
| 107 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed. |
| 108 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimeter in soft/loose soil complete all as specified and directed. |
| 109 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 110 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed. |
| 111 | S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’complete all as specified and directed. |
| 112 | M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 113 | M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed. |
| 114 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified |
| 115 | M&L forPCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified and directed. |
| 116 | M&L for Cement concrete 1:2:4 B-0(using 12.5 mm graded stone aggregate) in coping, bed plates and chamfered angles and throating etc complete all as specified and directed. |
| 117 | Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 118 | M&L for brick work with sub class "B"brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 119 | M&L for brick work with sub class "B"brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wallincluding demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 120 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 121 | M&L for 15 mm thick rendering on brick work or concrete surfacein cement mortar 1:6, surface finished even and fair complete all as specified and directed. |
| 122 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair Complete all as specified |
| 123 | M&L for preparation of newly plastered surfaces of wall / ceilingand applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 124 | M&L for preparing of old plastered and un plastered surfaces of wall, ceilingand applying two coats of distemper oil emulsion complete all asspecified & directed. |
| 125 | M&L for two coat weather coat exterior emulsion paint/ Apex ultima paint any tint over a coat of primeron walls/chajja, roof facia (projected portion) etc including complete removal of old existing treatment from wall up to plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plasteredsurfaces finally rubbed and smooth with sand paper complete all as specified and directed. Note : The work will be carried out up to double storey building the rate of scaffolding is included in this item also. |
| 126 | M&L for preparation of decorated surfaces and applying two coat of interior plastic emulsion paint on wall/ceiling complete all as specified and directed. |
| 127 | M&L for applying interior grade wall care putty 1mm thick to make the surface smooth complete all as specified and directed. |
| 128 | M&L for applying POP putty of 1mm thickness over plastered surface to prepare the surface even and smoothcomplete all as specified and directed. |
| 129 | M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1mm thick to make the surface smooth complete all as specified and directed. |
| 130 | M&L for textured paint and applying 3 coats of plastic emulsion paint over a coat of oilbased primer and 2 coats of chalk whitening and designing as texture paint with any colour/any texture complete all as specified and directed. |
| 131 | Taking down PVC/ AC/Salt glazed ware pipes and fittings for 110mmbore complete all as specified and directed. |
| 132 | S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed. |
| 133 | S & F in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed. |
| 134 | S & F in repair110 mm bore UPVC (SWR) bend with oval access door ,"T" socket reducer etc complete all as specified and directed. |
| 135 | S & F in repair75 mm bore UPVC (SWR) bend with oval access door ,"T" socket reducer etc complete all as specified and directed. |
| 136 | S & F in repairPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed. |
| 137 | M&L forsalt glazed stone ware gully traps square or roundedmouthed type ‘P’ of size 150x150mm embedded in PCC with necessary brick work . plastering etc and connecting to pipe complete all as specified and directed. |
| 138 | S & F in repairPVC(SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed. |
| 139 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 140 | M&L for Machine pressed any tint prepolished designer precast concrete factory made interlocking paver block with gray cement & pigment of any shape and size confirming to IS 15658-2006 of 60-80 mm thickness, M-35 Grade including dismantling existing tile any type complete all as specified and directed. |
| 141 | M&L for sand filling 20mm thick under floors or in foundations including watering and consolidation under interlocking tiles sand cushion complete all as specified and directed. |
| 142 | M&L for PCC 1:2:4 type B-1( using 20mm graded aggregate ) as in copping, Kneelers, apex stones bed plates, Kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 143 | S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 144 | S&F decorative wall mounting made out of polycarbonate suitable for and including retrofit 9 watts LED bulb complete all as specified and directed. |
| 145 | S&F LED tube light fitting batten type with extruded alluminium body and polycarbonate diffuser all in one single phase 22/20 Wwith lamp6500/4000 K complete pre-wired all accessories complete all as specified and directed. |
| 146 | Supply, fixing, connecting and testing of30 watt LED building security light luminaries with min 10 KV surge protector die cast alluminium housing LDR sensor for automatic operation complete suitable for and including bracket 32 mm GI pipe bend to shape including clamp fastener, bolts, nuts & washers of min 1.2 Mtr including grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified and directed. |
| 147 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 148 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 149 | S&F post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 150 | S&F in repair round shaped LED down lights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 151 | S & FLamp holder polycarbonate insulated body, with back plate with and including LED lamp retrofit 9/10 watts complete all as specified and directed. |
| 152 | M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLSun sheathed multi stranded copper conductor drawn in and includingnon metallic rigid PVC concealed conduit of med gradeof suitable size with all fittings and accessories including factory made MS pressedmodular metal flush boxes with zinc coated duly concealed in wall including required as per site requirementfor mounting modular switches, sockets fan regulators etcincluding continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed. |
| 153 | (a) One light point/ Fan point controlled by one, one way switch |
| 154 | (c) One bell point controlled by one-one way switch. |
| 155 | (d) One three pin 5 Amp socket on same board with other switches. |
| 156 | (e) One three pin 5 Amp socket on independent board |
| 157 | All as per item No 152.00 above here in but with 2.5 Sqmm. (nominal area) cable for phase & neutralfor one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor up to common earth & connected to earth dolly complete all as specified and directed. |
| 158 | Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good to any disturbed surfaces of walls floors etc. as per existing specification complete all as specified and directed. |
| 159 | Supply and fixing decorative polycarbonate modular white frame for fixing of switches and cover plate suitable for 8/12 modules 3 row and blanking plate if any required for spare module complete all as specified and directed. |
| 160 | All as per item No 155 here and above but 6 module. |
| 161 | All as per item No 155 here and above but 3 module complete |
| 162 | All as per item No 155 here and above but 1 or 2 module complete |
| 163 | S&F Modular switch 1 way 06 amp single pole complete all as specified and directed. |
| 164 | S&F Modular switch 1 way 16 amp single pole complete all as specified and directed. |
| 165 | S & F of modular socket outlet 16A-5 pin combined of 02 module complete all as specified and directed. |
| 166 | S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed. |
| 167 | S & of moduar bell push 6 Amp 1 module complete all as specified and directed. |
| 168 | S & F of modular fan step regulator120 W-2 module complete all as specified and directed. |
| 169 | S & F calling bell, AC 230 Volt single polecomplete all as specified and directed. |
| 170 | Supply and fixing Ceiling rose,three terminal ISI marked surface Bakelite suitable for batten fitting complete all as specified and directed. |
| 171 | Taking down sub main wiring of any size any type and in any position metallic/non metallic PVC conduit of wooden batten and making good the disturbed surface complete all as specified and directed. |
| 172 | M&Lfor sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected up to DB complete all as specified and directed. |
| 173 | M&L for Distribution boardVertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process.The DBs shall be of IP 43 protection including taking out old unserviceable distribution board complete all as specified and directed. |
| 174 | M&L for Distribution boardSPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed. |
| 175 | Supply and fixing of MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and including spreader link kit complete suitable for fixing as incoming in polycarbonate bus bar complete all as specified and directed. |
| 176 | S & FMCB SP 6 to 40 Amp, 240 Volts, "C" curve having breaking capacity 10 KA, complete all as specified and directed. |
| 177 | S & Fisolator SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA. complete all as specified and directed. |
| 178 | S&F in replacement MCB DBOXX combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C seriessuitable for AC/geyser etc complete all as specified & directed. |
| 179 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc complete all as specified & directed. |
| 180 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 of sweep 300mm including necessary nuts, bolts, and making hall or wooden frame to fix the same all as specified and directed. |
| 181 | Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 182 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified & directed. |
| 183 | Excavation in trenches n exc. 1.5 m wide and n" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 184 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. |
| 185 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified & directed. |
| 186 | Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid |
| 187 | Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B" designation 75 complete all as specified and directed and testing on completion complete all as specified and directed. |
| 188 | S&F tube "Light" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
