Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement plaster in any descriptionon brick or stone wall etc incl racking outjoints.hacking for key scrubbing down with water etc.,complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced) not exc 15cm thick inground floor and paving (below or above ground level) completeall as specified and directed. |
| 3 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed by Engr-in-Charge. |
| 4 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed by Engr-in-Charge. |
| 5 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 6 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 7 | Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 8 | Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 9 | Taking down old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses all as directed by the Engineer-in-Charge. |
| 11 | Dismantling unframed timber scantling 40 Sqcm and over in section, in any position all as specified and directed by Engr-in-Charge. |
| 12 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation oards/slabs/blankets, any thickness, including cover filletsall as specified |
| 13 | Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials. |
| 14 | Material and labour for 20 mm thick rendering in cement mortar (1:4), in two layers, each 10 mm thick, to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture\"s instructions), finished rendering surface even and smooth(without using extra cement),complete all as specified and as directed.(Note :Water proofing compound to be measured and paid separately as \"Supply only\") |
| 15 | M&L for application of damp proof painting in two layers as per manufacturers instruction in wall and ceiling surface including preparation of surface (by brooming down or steel wire brushung,scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified. Make: Smart care damp block-2K of Asian paints/Dampstop paint of berger paint. |
| 16 | M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 17 | M&L for 10 mm thick rendering in cement mortar (1:4)to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 18 | M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 19 | M&L At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same,complete all as specified and directed. |
| 20 | S&F in repair 35mm precast cement concrete type B0 1:2:4 using (12.5mm graded stone aggregate louvers and jallies including all mouldings set in CM 1:4, complete all as specified and directed. |
| 21 | S&F Decorative ornamentalPre-cast Reinforced Cement Concrete type B0 (1:2:4) using 20 mm graded railing/parapet post of size 150mm x150mm at base andtop and 100mm dia at mid -section, of height 630mm . Set in cement mortar (1:4) including taking down old unserviceable post complete all as specified and as directed.Note: Reinforcement work shall deemed to be included in the unit quoted rate. |
| 22 | M&Lfor PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor, complete all as specified and directed. |
| 23 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete,all as specified and directed. |
| 24 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement, complete all as specified and directed. |
| 25 | M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed. |
| 26 | M&L designer cement concrete tile of size 150mm x 75mm x 18 mm thick (with rainbow polymer based continuous tiles) in verticale surface such as skarting, dado laid over and including 10 mm thick screed bed in cement mortar 1:3 set and jointed in cement sulrry and pointed in white or colured cement to match the surfaces complete all as specified and directed.(Make: Ultra tiles, Model: EDEN or equivalent model in other approved make specified in tender) |
| 27 | M&L Pre Polished Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neatwith grey cement pigmentslurry in floorsincluding 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified anddirected. |
| 28 | M&L forheavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified anddirected.(MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender) |
| 29 | Supply and laying 60mm thick factory made chamfered edge precast glazed cement concrete paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.(NOTE: Cost of sand cushioning is deemed to be included in the quoted rates) |
| 30 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 31 | S&F as in repairRCPC (Reinforced Cement Polymer Concrete) grating slab on size 1200mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge |
| 32 | S&F as in repairRCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge |
| 33 | S&F as in repairRCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge |
| 34 | M&Lforapplying one coat of white wash with brush on old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 35 | All as per item No.34 above, but on Ceilings |
| 36 | M&Lforapplying one coat of oil bound distemper with roller on old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 37 | All as per item No.36 above, but on Ceilings |
| 38 | M&Lforapplying two coats of oil bound distemper with roller to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 39 | All as per item No.389 above, but on Ceilings |
| 40 | M&L for complete removal of existing treatment of old wall surface, applying 1 to 2mm thick BIRLA/JK water proof wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer with rollercomplete all as directed by Engr-in-charge. |
| 41 | M&Lforapplying one coat of plastic emulsionpaint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 42 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over 1 to 2 mm thick plaster of Paris complete all as specified and directed by Engineer -in-Charge. |
| 43 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer, complete all as specified and directed by Engineer -in-Charge. |
| 44 | M&Lforapplying one coat of cement base paint with brush on old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 45 | M&Lforapplying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 46 | M&Lforapplying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 47 | M&Lforapplying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 48 | Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed. |
| 49 | Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying two coat of exterior emulsion paint weather coat over one coat of primer over wall care putty avg thickness 1-2 mm, complete all as specified and as directed. |
| 50 | M&L for applying one coat of varnishing on old treatedwooden surfaces of any description over 10 cm width or girth including cleaning and preparation all as specified and directed by Engr-in-Charge. |
| 51 | M&L Cleaning of floor with water & polishing with mansion polish complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L for brick work using old size sub class \"B\" bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed by Engr-in-Charge. |
| 53 | M&L brick work using old size sub class \"B\" bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed by Engr-in-Charge. |
| 54 | M&Lfor Waterproof (elastic and breathable) film coating in two layer (as per manufacturer instruction) ,patch repair of Damp & repaired walls over old or new plastered surfaces of walls including preparations of wall complte all as directed byEngineer -in-Charge.(Make: Sureseal, Berger, Dr Fixit etc.,) |
| 55 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6, complete all as directed. |
| 56 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed. |
| 57 | Material and labour for 300mm X 450mm X 7mm thickdecorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge. |
| 58 | Supply and fix vitrified tiles(light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmas in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 15 mm screed bed in CM (1:6), complete all as directed. |
| 59 | Supply and fix vitrified tiles (light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed. |
| 60 | Supply and fix vitrified tiles(dark shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 15 mm screed bed in CM (1:6) complete all as directed. |
| 61 | Supply and fix vitrified tiles ( dark shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed. |
| 62 | S&F20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing overand including 20mm screed bed in CM(1:6) completed all as directed. |
| 63 | S&F20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing overand including 10mm rendering in CM(1:3) completed all as directed. |
| 64 | M&L preparation of surfaces and pasting of wall paper of any design/ pattern/ shade, complete all as specified and approved by GE of Brand Nilaya of Make- Asian or equivalent in other approved makes of Nerolac/Berger. |
| 65 | Supply and fixing 2nd class hard woodplain solid straight chowkats and frames,wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and as directed by Engineer-in-charge. |
| 66 | Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick, complete all as specified and directed. |
| 67 | S&F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 . |
| 68 | supply & fixing 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with cmmercial face veneers, fitted to chowkats complete all as specified and as directed by Engineer-in-charge. |
| 69 | supply & fixing 30 mm thick 2nd class harrd wood skelton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of menbers of shutters as specified in SSR Part-I, Section 8.24(b) and as directed by Engineer-in-charge. |
| 70 | S&F 30 mm thick 2nd class harrd wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for ecuring glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 71 | S&F1st class hard wood 35 mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for ecuring glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 72 | S& F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge. |
| 73 | S&F Aluminium door frame and operable shutter, windows and partitions and ventalators with one or more rebates including jointing cleat for fixing etc , complete all as specified and as directed. |
| 74 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 75 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 76 | Supply and fixing 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge |
| 77 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repaircomplete all as specified and as directed. |
| 78 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC \"C\" Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed. |
| 79 | S&F instainless steel wire cloth of 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge. |
| 80 | M&Lforpreparation ofnew untreated wooden surfaces of any description,not otherwise describedover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer -in-Charge. |
| 81 | Supply & fixing 100mm stainless steel butt hinges(medium weight) cold rolled complete all as directed by Engineer-in-charge. |
| 82 | Supply & fixing 75mm stainless steel butt hinges(medium weight) cold rolled complete all as directed by Engineer-in-charge. |
| 83 | Supply & fixing 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) make: Alans/Classic all as directed by Engineer-in-charge. |
| 84 | Supply & fixing extruded aluminium alloy handle fabricated type anodised 100 mm size (ISI marked) make: Alans/Classic all as directed by Engineer-in-charge. |
| 85 | S&F 150mm long aluminium anodised handles (fabricated type) ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed by Engr-in-Charge. |
| 88 | S&F 3mm thick plain sheet glass ordinery quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F 4.8mm thick plain sheet glass ordinery quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F in repairs stainless steel wire cloth of 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge. |
| 91 | M&L in repairs 0.9mm thick decorative laminate type-1 (sunmica) of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer\"s instruction complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F mortice lock in repairs vertical type 100mm dia size 6 leversof make: Godrej/Link/Harison complete all as specified and directed. |
| 93 | S&F in repairs coat hooks, solid body 175mm (six points) to 250mm of aluminium body and fixedcomplete all as specified and directed by Engr-in-Charge. |
| 94 | S&Fin repairs 40mm dia cup board knobs, fancy type all as specified and directed by Engineer-in-Charge. |
| 95 | S&Fin repair Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F 2nd class hard wood timber wrought and fixed as in framedscantling over 40 Sqcm in section all as directed by Engr-in-Charge. |
| 97 | S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section,wrought , cross sectional area exc 6 Sq cm but n exc 13 Sq cm,secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engr-in-Charge. |
| 98 | S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section,wrought , cross sectional area exc 3 Sq cm but n exc 6 Sq cm,secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engr-in-Charge. |
| 99 | S&F in repair rubber gasket of size 50mm X 6mm sutaible for air sealings of aluminium/wooden door, window etc. complete all as directed by the Engr-In-Charge |
| 100 | S&F in repair 12mm thick plywood grade BWR type B-B fixed with screws to timber frame works all as directed by the Engr-in-Charge.(Make : Greenply / Kitply / Alishan or equivalent as approved by Accepting Officer) |
| 101 | S&F in repair 6mm thick plywood grade BWR type B-B fixed with screws to timber frame works as all as directed by the Engr-in-Charge.(Make : Greenply / Kitply / Alishan or equivalent as approved by Accepting Officer) |
| 102 | S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etcall as directed by the Engr-in-Charge.(Make : Greenply / Kitply / Alishan or equivalent as approved by Accepting Officer) |
| 103 | S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheetinghaving 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 smallstiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof completeall as specified and directed. |
| 104 | All as per Item No. 54 above, but 0.50 mm thick colouredplain galvalume sheet as in ridge/valley gutter of roof. |
| 105 | S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap as in roof, wall fixed with L-type or J- type or crancked hook bolts in lieu screw complete all as directed by the Engr-in-Charge |
| 106 | S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm. |
| 107 | S&F in repairs 450 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt. |
| 108 | S&F in repairs 600 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt. |
| 109 | S&F in repairs 300 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts. |
| 110 | S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140mm fixed in flooras in repair complete all as specified and as directed. |
| 111 | M&L mild steel rolled sections as in main and cross beams,angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410- W (Gde- E- 250) quality- A made to required shape and size, welded at joints complete all as specified and directed |
| 112 | S&F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge. |
| 113 | S&F0.56 mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutter, drip and staight flashingetc complete all as specified and as directed. |
| 114 | Supply and Fixing PVC solid wall lining consisting of 5 mm thick plain colourPVC sheet used inclusive of solven tcementand fixing atsite on PVC frame as per manufacturer’s specification and instruction) directed by the Engineer-in-Charge. |
| 115 | Supply and Fixing PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall paneling inclusive of fixing as in grid / frame on wall at a distance .6m horizontal & vertical for wall lining/paneling as per specification of manufacturer and as directed by the Engineer-in-Charge. |
| 116 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. |
| 117 | S&F cast type ,polished bright brass handles 100mm long complete all as directed by the Engineer-in-Charge. |
| 118 | S&F in repairs continuous (piano) hinges mild steel bright finish width of flap 30mm when opened complete all as directed by the Engineer-in-Charge. |
| 119 | S&F in repairs4 levers brass body, lock ,drawer graded 1 size 50 mm, complete all as directed by the Engineer-in-Charge. |
| 120 | S&F in repairs aluminium \"E\" channel for sliding drawer shutter of cub board in two way 300 mm long complete all as directed by the Engineer-in-Charge. |
| 121 | S&F in repairs 100 mm double action spring hinges ( Hydraulic hinges) brass with phosphor bronze wire spring , bright polished complete all as directed by the Engineer-in-Charge. |
| 122 | S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod withfixing brackets, stops, rollers etc.,asdirected by Engr-in-Charge. |
| 123 | S&F in repairs fancy type metal finish curtain bracket fixed to walls,complete all as specified and directed by Engr-in-Charge. |
| 124 | M&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in repair,all as specified and as directed |
| 125 | S&F 10 to 12 mm thick gypsum board false ceiling including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mmwith web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board scrrewed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces, complete all as specified and directed. |
| 126 | Supply and fixed in repairs 100mm wide decorative corner bead ( of approvrd design) made of plaster of paris, fixed with screws all as specified and as directed by Engineer - in - charge |
| 127 | Removal of existing water proof treatment of any description including cement plaster carefully from the surfaces cleaning and scrubbing down with water complete all as specified and as directed. |
| 128 | M&L for Providing, cement concrete, Type B1, 1:2:4 ( 20mm aggregate) in roof kerbs or mud stops,padding, rounded or chamfered on edges on existing roof( with proper slope) including preparing of roof slab complete all as directed by Engineer - in - charge . |
| 129 | M&L rendering 10 mm thick screed bed on concrete surface in CM (1:4) & water proofing compound mixed with @ 3% finished fair and even,complete all as specified and as directed. ( Note -W.P.C. shall be measured and paid separetly . ) |
| 130 | M&L for water proofing treatment on existing cleaned RCC roof with following specification and manufacturer Instruction complete all as specified as directed.(a) Applying bitumen primer conferming to IS-3384-1986 over the cleaned plaster surfaces as per IS-3067-1966.(b) Applying alayer of APP based polymeric membrane 3.0mm thick (minimum) weighing 3.0 Kilogram per sqm (reinforced with polyster non oven fabric weighing not less than 160 Gmss per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction.(c) applying one coat of aluminium paint @ 0.10 Litre per Sqm Over APP based Polymeric membrane. |
| 131 | Supply only integral water proofing compound all as specified and as directed. |
| 132 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 133 | S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.(MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002) orequivalent model in JAQUAR / CERA / HINDWARE) |
| 134 | S&F in repair various china coloured flat back wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling,CP bottle trap bracket, 32mm dia PVC waste pipe including taking down/out unserviceable Wash Hand Basin and making all necessary connections as di rected by Engr-in-Charge. Model : VENICE N / CERA, Model: CONCORD / HINDWARE, Model: NEO LARGO / Jaquar, Model: ARIA) |
| 135 | S&F in repair various china white flat back wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling,CP bottle trap bracket, 32mm dia PVC waste pipe and making all necessary connections, fixed as directed by Engr-in-Charge Model : VENICE N / CERA, Model: CONCORD / HINDWARE, Model: NEO LARGO / Jaquar, Model: ARIA) |
| 136 | Supply and fixvitreous china wash basin, white, counter top, size 450 x 400mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .(Make : Jaguar or equivalent as approved by Accepting Officer). |
| 137 | S&Fin repair Chromium plated brassAngular stop cock, fancy type,concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed.(Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) orequivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) |
| 138 | Supply and fix, as in repair, 15 mm bore bib taps, fancy type, chromium plated long neckcast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.(Make : Jaguor or equivalent as approved by Accepting Officer). |
| 139 | Supply and fixed fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete al as specified and directed .(Make : Jaguar or equivalent as approved by Accepting Officer). |
| 140 | S&F in repair Chromium plated brassWall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216) orequivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) |
| 141 | S&F in repair Chromium plated brassWall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022)orequivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE)NOTE: Telephone shower shall be measured and paid seperately. |
| 142 | S&F fancy type chromium plated telephonic hand shower with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed.(Make : PARRYWARE, Cat No: T9983A1/ Ess Ess, Cat No: HS 105) / PRAYAG, cat No: BHS-91S/ CERA, Cat No: F7030502 / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR) |
| 143 | S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directted by Engr-in-Charge.(MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS) orequivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) |
| 144 | S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed.(Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1/ CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) orequivalent model in JAQUAR / CERA / HINDWARE / PARRAYWARE) |
| 145 | S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed.(Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 orequivalent model in JAQUAR / PARRAYWARE) |
| 146 | S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003) |
| 147 | Supply & fix, as in repairs, brass cromium plated over head shower roses125 mm size with or without swivel joint, including fixing to steel pipe or union all as specified and direcetd(Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051)orequivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) |
| 148 | S&F in repair Aluminium body ( extruded section ) door closer hydraulically regulated, designation No 3 , universal type suitable for door shutters of 851 to 1000 mmm in width and weight between 61 to 80 kgas directed by the Engr-in-Charge.(Make : Godrej, Cat No. 1938 or equivalent as approved by Accepting Officer). |
| 149 | S&F in repairs, Tubular towel rail (premium quality), 20mm dia,600 mm long between flanges including brass chromium plated, complete all as specified and directed.(MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 /HINDWARE, Cat No: F840013 ) orequivalent model in JAQUAR / CERA / HINDWARE/ PARRAYWARE) |
| 150 | S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12) orequivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) |
| 151 | S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittingsincluding taking down existing water closet complete all as specified and directed.(Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION orequivalent model in JAQUAR) |
| 152 | S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) white including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittingsincluding taking down existing water closet complete all as specified and directed.(Make :CERA, Model : CALIBRE / ASIAN PAINTS, Model: PRIMUS / JAQUAR, Model: CONTINENTAL / HINDWARE, Model: ALPHA S 220 / PARRYWARE, Model: INDUS) |
| 153 | S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as directed by the Engr-in-Charge . |
| 154 | Supply and fixing chromium plated toilet tumbler holder in repairs (including with tumbler and chromium plated wall flange), fixing with stainless steel screws complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaguar cat No. CAN 1141 N or its equivalent in make. ESS-ESS / ESSCO) |
| 155 | S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed.(Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)orequivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) |
| 156 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and as diretced. Make : Ess Ess, Cat No AC207or equivalent. |
| 157 | S&F in repair corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102 orequivalent model in JAQUAR / CERA / HINDWARE/ PARRAYWARE) |
| 158 | S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed(Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)orequivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) |
| 159 | S&F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed. |
| 160 | S&F in repair 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed. |
| 161 | S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with \"P\" or \"S\" trap front or back inlet, fixing bolts(except flushing cistern and flush pipe) incl plastic water closet seat cover (coloured) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK) |
| 162 | Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.(MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON) |
| 163 | Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.(MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON |
| 164 | S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handleincluding Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed.(MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER) |
| 165 | S&F Shower panels silver strand with and hand shower 6 horizontal massage body jets with over head shower incl taking down old onecomplete all specified and as directed. Make: Parryware (Code No. C-847G99) orequivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) |
| 166 | S&F in repair Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355mm x 165 mm for Kitchen or Laboratory with Plugs, Washers,Brass chromium plated Waste Fitting 32mm dia,PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.Make : NIRALI/ Prayagor equivalent ). |
| 167 | S&F in repair coloured( any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed by Engr-in-Charge. |
| 168 | All as per item No.167 above, but white seat cover for EWC |
| 169 | S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed.(Make : PARRYWARE, Cat No: E8300 orequivalent model in JAQUAR / CERA / HINDWARE) |
| 170 | S&F in repairs stainless steel round grating 150mm dia complete all as specified and directed by Engr-in-Charge. |
| 171 | S&F 20 mm dia Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brassferrule and fixed, complete all as specified and directed. |
| 172 | S&F 25 mm dia Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brassferrule and fixed, complete all as specified and directed. |
| 173 | M&L for Disconnecting existing water tanks capacity exc 250 ltr n exc 500 ltr , setting aside (or lowering if required) for cleaning,repairs, leaning, etc. and hoisting using cleaning agents (chemical coumpound) if required all as specified and directed. |
| 174 | M&L for Disconnecting existing water tanks capacity exc 500 ltr n exc 1000 ltr , setting aside (or lowering if required) for cleaning,repairs, leaning, etc. and hoisting using cleaning agents (chemical coumpound) if required all as specified and directed. |
| 175 | M&L for Disconnecting existing water tanks capacity exc 1000 ltr n exc2000 ltr , setting aside (or lowering if required) forcleaning,repairs, leaning, etc. and hoisting using cleaning agents (chemical coumpound) if required all as specified and directed. |
| 176 | Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
