Military Engineer Services-MES has published Tender For Special Repair To Bldg No P 54 Or Bathroom And Mes Instln Under Ge I Gos. Submission Date for this Tender is 12-10-2023. Building Work Tenders in gopalpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each(without taking off shutters from the frames) complete all as specified and as directed |
| 2 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 3 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 4 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 5 | S&F for 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed |
| 6 | S&F100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 7 | S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed. |
| 8 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 9 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 10 | M&L for painting steel and iron surfaces ofsteel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed. |
| 11 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) andfinished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 13 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 andfinished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 14 | M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed |
| 15 | Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed |
| 16 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 18 | M&L for preparaion of newly plasteredsurfaces of walls andfinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and as directed. |
| 19 | M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 20 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 21 | M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 22 | M&LPCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed |
| 23 | S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed |
| 24 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 25 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed |
| 26 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed. |
| 27 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed |
| 28 | M&L for hardcore of broken stone or boulders guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 29 | M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 31 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coatof cement mortar in 1:4 complete all as specified and as directed |
| 32 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 33 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 34 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 35 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 36 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 37 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 38 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 39 | S&F for110 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 40 | S&F for75 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 41 | Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 42 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 43 | Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 44 | Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 45 | S&F for 25mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 46 | S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 47 | S&F for25mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 48 | S&F for20mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 49 | S&F for 25mm CPVC Brass thread union complete all as specified and as directed. |
| 50 | S&F for 20mm CPVC Brass thread union complete all as specified and as directed. |
| 51 | S&F for 25mm CPVC ball valve complete all as specified and as directed. |
| 52 | S&F for 25mm CPVC tank adopter complete all as specified and as directed. |
| 53 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 54 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 55 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed. |
| 56 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 57 | M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed |
| 58 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ove 15mm thick screed bed in cement mortar (1:6) and complete all as specified and as directed |
| 59 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 60 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed |
| 61 | Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed. |
| 62 | S&F for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 63 | S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 64 | M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 65 | S&F in repairs white vitreous china squatting pan orissa pattern of size 580mmx440 mm white, with integral foot rests connected with"P" or "S" trap and flushing pipe and taking out old WC & connections complete all as specified and as directed |
| 66 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed |
| 67 | S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 68 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe andflush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed |
| 69 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 70 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate)complete all as specified and as directed |
| 71 | S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed |
| 72 | M&L PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed. |
| 73 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed |
| 74 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 75 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 76 | M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed |
| 77 | S&F for Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 78 | S&F for soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 79 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered "Hot" or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 80 | S&F for Brass chromium plated shower rose 125 mm sizefixing to steel pipe or union complete all as specified and as directed |
| 81 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed. |
| 82 | S&F in repairs 15mmstop valves(concealed type),cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 83 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 84 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 85 | S&F for rolled mild steel in steel worktubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 86 | S&F for Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed |
| 87 | S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty or fixed with beads in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 88 | S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. |
| 89 | S&F 15mm dia Angle Stop Cock with wall flange all as specified and directed. (Cat Part No G1807A1) complete all as specified and as directed. |
| 90 | Supply and fixed PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sinkcomplete all as specified and as directed. |
| 91 | Material, T&P and labour for cleaning of manhole using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed. |
| 92 | M&L for removing sludge from septic tanks using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 including removal of sludge water mechanically and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelinesas per Rule 5 and protective gear and safety devicescomplete all as specified and as directed. |
| 93 | Material, T&P and labour for cleaning of gully traps, Nahni traps, chamber etc using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed. |
| 94 | M&L for cleaning of sewage line of any size of dia bore with cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and dispose of the night soil/sludge outside MD land unprohibited by any authority and following the statutory law / guidelinesas per Rule 5 and protective gear and safety devicescomplete all as specified and as directed. |
| 95 | M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing old tarfelt, bituminous compound, cement mortar including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b)M&L for 15 mm thick cement mortar with WPC in 1:4over PCC when concrete is green. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric(weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above.Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:-Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab. |
| 96 | Supply,Install,Testing and Commissioning of SOLAR WATER SYSTEM (Evacuated Tube Collector) based on direct transferring of heat of capacity of 500LPD complete all as specified and directed. Make: TATA SOLAR/Jackson |
| 97 | M & L forangle iron framed works by welding angle iron of size 50x50x6mm and 6mm MS Sheets of Fe-410 W (Gde-E-250) qualtiy - B,all as specified and as directed including applying synthetic enamel paint two coats over a coat of red oxide primer complete all as specified and directed |
| 98 | Material and labour for PCC 1:5:10 type E2 using 40mm graded stone agrregate as in Foundation,filling and mass concrete , complete all as specified and directed. |
| 99 | Supply and fixing to walls and ceilings or laid on floor Galvanised steel (Gl) tubing "Medium grade" with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, shortpieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) with complete with clips, wall hooks, wooden plugs & including cutting, screwing, making forged bends on piping as required. insertion of connectors where required or directed.including cutting through walls, floors, etc. and their making good all as specified and as directed for15mm bore pipe Make : Jindal/TATA |
| 100 | All as per item no. 99 but 20mm bore . |
| 101 | S&F Gun-metal, globe or gate valves 15 mm dia with iron wheel head, screwed both ends for iron pipe , complete all as specified and directed. Make: Zoloto/Kirloskar |
| 102 | S&F Gun-metal, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 103 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket of capacity complete with one single pole MCB of capacity 240 volts 20 amp c , complete all as specified and directed. Make; Havells/L&T/Indo asia |
| 104 | Supply only Heating element with rubber washer ("O" ring) cap 3 KW. (triangular /round ) any type, complete all as specified and directed. Make-Make- Theetta, Micron., DasPass |
| 105 | Supply only Foaming insulator for Solar water heater out let pipe line all as specified and directed. |
| 106 | Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders, brackets, bulkhead fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc, complete all as specified and directed. |
| 107 | M&L for point wiringfor One light point controlled by one, one way switch with 1.5Sqmmcopper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and includingconcealed in PVC conduit 20 mm dia ISI marked orsuitable size(as per conductor run) with all fittings/ accessories and including PVCinsulated electric cable1100 volts 1.5 Sqmm ( multi-stranded)copperconductor single core( Green colour)cable as continuous earth wire connected to common earth dollyby providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for one light point/bell point etc controlled by one, one way switch complete and making good the disturbed surfaces with cement work/putty as per existing including colour/white wash/distemper to match with existing same, complete all as specified and directed. |
| 108 | All as per item no. 107 but forOne fan/exhaust fan point controlled by one, one way switch |
| 109 | M&L for Switch piano flush button5 Amps, complete all as specified and directed. |
| 110 | Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals/ PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed . |
| 111 | Supply and fixing for sub main wiring two single core PVC insulatedand unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing capingwith 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiringcomplete all as directed. Note : two run 6sqmm and one run of earth wire 4sqmm and PVC conduit will be measured as one length. |
| 112 | Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed. Make; L&T/Schnider |
| 113 | Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 4 way (Double door) with 200 amp rated bus bar all as specified and directed. Make; L&T/Schnider |
| 114 | S&F Isolator DP 40A, 240 volts completeall as specified and directed Make; L&T/Schnider |
| 115 | S&F MCB SP up to 40 Amp, 240 volt completeall as specified and directed |
| 116 | Material and labour for PVC rectangularblock of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet completeall as specified and directed |
| 117 | S & F LED light fitting 1 x 10 Watt T5 Alumniumbatten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincl taking down the old USNV completeall as specified and directed Make; Philips/Havells/Surya |
| 118 | S &F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete all as specified and directed. Make; Philips/Havells/ Surya |
| 119 | Supply and fixing exhaust fan300 mm sweep, 1400 RPMwith louver complete all as specified and directed. Make; Polycab/Usha |
| 120 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on complete all as specified and directed. |
| 121 | Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out pole foundation/cable trench complete all as specified and directed. |
| 122 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 123 | Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 124 | Supply and providing sand cushioning with dry clean sand 8 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments. |
| 125 | Supply and laying Fly ash bricksin trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed. |
| 126 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables of size 10sqmm 2core heavy duty 1100 volts grade, with stranded aluminium conductor with all fixing & connecting accessories such as aluminium cable lugs, cable gland, nut, bolts, washer etccomplete all as specified and directed:- Make; Polycab/havells |
| 127 | Supply,installation, commissioningand testing of factory made CPRI approved out doorcubical type Panel Box totally enclosed over all size not less than 1500 x600x.1400 mm (LXBXH) fabricated with3.15mm thickCRCA sheet (Heavy duty) over a frame of 45x45x6 mm angle iron and mounted onplatformdust & vermin proof, IP-65 protection,back side openable,fixed with nuts & bolts and front side openable withhinged shutterand locking arrangementforMCCBs double door powder coatedboth internallyand externallysuitable for 415 V,AC, 50 HZ, 3 Phase, 4 wire system by means of copper bus bar of suitable size duly wrapped with coloured insulating tape/ sleevesmounted on porcelain insulators with provision of fixing MCCBs necessary inter connections with copper strips of suitable sizeduly wrapped with coloured insulating tape/ sleevesmounted on porcelain insulators andproviding following switch gearincludingconnection with all incoming/outgoingcables ofdifferent size duly crimping with suitable size copper lugs complete including taking out old unsv ItemNote : Drawing shall be got approved by Engr-in-charge before manufacturing of the LT panel. INCOMING: (a)Moulded case circuit breakers(AC 415) MCCB current rating 250 Amp-01 Nos,4 pole, breaking capacity Icu at 415 Volt, 25 KA , 50Hz with extended terminals adjustable microprocessor release industrialtype, adjustable thermal ( 40% - 100%) & adjustable magetic (6-10 times) Make: Schneider/L&T/HavellsOUTGOING:-(a) Supply and fix Thermal Magnetic release,MCCB 200 Amps 415 Volts=01 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items.Make: Schneider/L&T/Havells(b) Supply and fix Thermal Magnetic release,MCCB 100 Amps 415 Volts=05 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items. Make: Schneider/L&T/Havells(c) Supply and fix Thermal Magnetic release,MCCB 63 Amps 415 Volts=05 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items. (d) S&F 32Amps 10 KA Mcb complete all as specified. Make :Schneider/L&T/Havells(e) 1 No.Multifunctional Digital Voltmeter 0-500Volt with selector switch(f) 1 No. Multifunctional Digital Ampere meter 0-250 A with selector switch with CT"s.(g)LEDPhase (RYB) indicator lamp -01 Set (Set of three) |
| 128 | Supply,installation, commissioningand testing of factory made CPRI approved out doorcubical type Panel Box totally enclosed over all size not less than 1200 x600x.1400 mm (LXBXH) fabricated with3.15mm thickCRCA sheet (Heavy duty) over a frame of 45x45x6 mm angle iron and mounted onplatformdust & vermin proof, IP-65 protection,back side openable,fixed with nuts & bolts and front side openable withhinged shutterand locking arrangementforMCCBs double door powder coatedboth internallyand externallysuitable for 415 V,AC, 50 HZ, 3 Phase, 4 wire system by means of copper bus bar of suitable size duly wrapped with coloured insulating tape/ sleevesmounted on porcelain insulators with provision of fixing MCCBs necessary inter connections with copper strips of suitable sizeduly wrapped with coloured insulating tape/ sleevesmounted on porcelain insulators andproviding following switch gearincludingconnection with all incoming/outgoingcables ofdifferent size duly crimping with suitable size copper lugs complete including taking out old unsv Item Note : Drawing shall be got approved by Engr-in-charge before manufacturing of the LT panel. INCOMING: (a)Moulded case circuit breakers(AC 415) MCCB current rating 250 Amp-01 Nos,4 pole, breaking capacity Icu at 415 Volt, 25 KA , 50Hz with extended terminals adjustable microprocessor release industrialtype, adjustable thermal ( 40% - 100%) & adjustable magetic (6-10 times)Make- Havells/C&S /LegrandOUTGOING:- (a) Supply and fix Thermal Magnetic release,MCCB 160 Amps 415 Volts=01 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items.Make Schneider / L&T/Havells(b) Supply and fix Thermal Magnetic release,MCCB 100 Amps 415 Volts=01 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items.Make Schneider / L&T/Havells (c) Supply and fix Thermal Magnetic release,MCCB 63 Amps 415 Volts=01 nos4 pole 16 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items.Make Schnider / L&T/Havells (d) 1 No.Multifunctional Digital Voltmeter 0-500Volt with selector switch (e) 1 No. Multifunctional Digital Ampere meter 0-250 A with selector switch with CT"s. (f)LEDPhase (RYB) indicator lamp -01 Set (Set of three) |
| 129 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to galvanised iron strip 32mm X 6mm (as earth lead strip), by means of bolt, nuts, check nuts and washer of GI and GI strip protected by provision of GI pipe light grade, 40mm bore upto test point including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25 x 25 x 3 mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metres long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection to earth test point complete all as specified and directed. NOTE :- Item of earthing includes the cost of 7.5 metre long galvanised iron strip 32mm X 6mm size and protection pipe of 40 mm bore galvanised iron light grade. |
| 130 | Supply and fix Thermal Magnetic release,MCCB 400 Amps 415 Volts,4 pole 36 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required fitting items Including taking down old unserviceable Mccb"s complete all as specified and directed.Mak: Schneider L&T/Havells. |
| 131 | Supply and fix Thermal Magnetic release,MCCB 250 Amps 415 Volts,4 pole 36 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required fitting items Including taking down old unserviceable MCCB complete all as specified and directed. Make Schneider / L&T/Havells. |
| 132 | Supply and fix Thermal Magnetic release,MCCB 160 Amps 415 Volts,4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required fittings items Including Taking down old unservicable MCCB complete all as specified and directed.Make Scheider /L&T/Havells. |
| 133 | Supply and fix Thermal Magnetic release,MCCB 125 Amps 415 Volts,4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required fittings items Including Taking down old unservicable MCCB complete all as specified and directed. Make Schneider L&T/Havells. |
| 134 | Supply and fix Thermal Magnetic release,MCCB 100 Amps/80 Amps/63 Amps 415 Volts,4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items Including Taking down old unservicable Mccb"scomplete all as specified and directed.Make Schneider /L&T/Havells |
| 135 | Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps complete all as specified and directed. Make: L&T/Havells/Schneider |
| 136 | Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps complete all as specified and directed. Make: L&T/Havells/Schneider |
| 137 | Supply and fixing install new wall split unit indoor / outdoor of capacity 1.5 TR complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories i.e necessary copper tube as per site requirement Heavy duty MS stand for outdoor unit indoor unit plug top holefastners, necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units drain pipe from indoor unit to outside bldg with minimum 5 star rating complete all as specified and directed. Make :- Dalkin/ Carrier/ Hitachi/ O-Genaralor any approved make. |
| 138 | Supply and fix Voltage stabilizer for automatic operation single phase digital display type, naturally air cooled indoor type & designed for input variation between 130 volts to 280 volts without voltage stabilized at 20 volts with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed. Make :-Sen & Pandit / V-Guard/ Vinitec Electronic or any approved make. |
| 139 | M&L for sub main wiring complete with 2 run of 6sqmm single core copper conductor (ISI marked) cable 1100 volts grade, ISI marked, FRLSH type (conforming to IS-694/1990 as amended ) PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade (MMS) with all connected accessories such as bend, Tee, Elbow, Short pieces etc concealed in wall / roofs/ floors and including one run of 4 sqmm singlecore copper conductor cable flexible, PVC insulated, unsheathed, multi stranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note :- Two run of 6 sqmm single core copper conductor cable as each continually and one run of PVC condut shall be measured as one unit. |
| 140 | Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps 10 KA ‘C series, 230 Volts 50Hz suitable for AC’s Geysers completed all as specified and directed. Make :- Legrand / hager / Havells or as equivalent approved make. Make:- (1) PVC copper conductor cable FRLSH type Finolex / Havells / RR Kable / Polycab. (2)PVC conduit (MMS) PVC casing caping& Accessories ISI Maked – Presto Plast / Finolex/ Kalinga Gold / Plaza / AKG Plastics Pvt Ltd. |
| 141 | M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, ISI marked, FRLSH type (conforming to IS-694/1990 as amended ) PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade (MMS) with all connected accessories such as bend, Tee, Elbow, Short pieces etc concealed in wall / roofs/ floors and including one run of 4 sqmm singlecore copper conductor cable flexible, PVC insulated, unsheathed, multi stranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note :- Two run of 4 sqmm single core copper conductor cable as each continually and one run of PVC condut shall be measured as one unit. Make:- (1) PVC copper conductor cable FRLSH type Finolex / Havells / RR Kable / Polycab. (2)PVC conduit (MMS) PVC casing caping& Accessories ISI Maked – Presto Plast / Finolex/ Kalinga Gold / Plaza / AKG Plastics Pvt Ltd. |
| 142 | Supply and fix and sheet metal enclosure, with acrylic type double door, 240 vols AC, SPN, DB 4 way, flush mounting with 100 amps copper busbar, neutral bar , earth bar and MCB incomer, MCB SPN/ DP, and MCB SP as outgoning for IP 43 & IP54 DBs Protection and including removing old unserviceable DBs making good the disturbed surface to match with existing surface and colour shade complete all specified and as directed. Make :- Legrand cat No. 5076 204way of equivalent in ABB / Havells. |
| 143 | Supply & fix MCB SPN 6 to 32 Amps 10 KA, “C” series , AC240 Volts 50Hz ISI marked and complete all as specified and directed. Make:- Legrand / ABB/ Havells or as approved make. |
| 144 | Supply & fix MCB SPN 40 to 63 Amps 10 KA, “C” series , AC240 Volts 50Hz ISI marked and complete all as specified and directed. Make:- Legrand / ABB/ Havells or as approved make |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
