Tender For Sitc Of 20 Mtr High Mast At Various Palces In Municipal Area Reni Alwar, alwar-Rajasthan

Supply, installation, testing, commissioning Of 20 Mtr High Mast At Various Places In Municipal Area Reni Alwar , Supply, Erection Testing And Commissioning Of High Mast Lighting System (As Per Cp3-Trt/1996Ofile,Uk)Consisting Oftotally Hotdipgalvanisedby Single Dipped Method High Mast, Lantern Carriage Suitable For Up To 12 Nos Luminaries,Mastheadassembly,Two Nos Aviation Obstructionneon Lights, Double Drum Type Self Sustaining Winch, Integral Power Tool( Winch Motor With Control Circuit) Hot Dipped Galvanised Heavy Duty Pipe Lightening Finial,Suitableropes Andccfoundationofm-15Gradecompleteas Required. Themastis Constructedfrommildsteelplates(As Perbs-En 10025)Cut And Foldedtoformapolygonalsection,Telescopicjointedandweldingasperbs 5135. The Complete Work Shall Be Supervised And Certified By The Manufacturers For Satisfactory Supply, Erection, Testing And Commissioning Of High Mast. With All Accessories, Which Also Includs Internal Electrical Cable And Panel With Foundation, Erection & Commissioning Excluding Luminaries And Lamps 20-0Mtr Hm (In 2 Section) Group 1 , P & F Of Ip-66 Protected High Power Led Flood Light System With Extruded Aluminiumhousing , Toughened Glass Diffuser With Suitable Lenses On Led To Achieve Various Beam Angles, 350 Volt, 50Hz, Of High Power Led Lamps Supplied With Pre Wired Cable Of 1 Mtr. Integrated Driver Shall Be High Efficiency Having Efficiency More Than 85 % And In Compliance To Iec Standards. System Life Of 50000 Burning Hours With 70 % Of Initial Lumen Be Maintained. Light Output In Red , Green , Blue, Cool White Or Warm White Colour As Per Engineers Choice. Fixtures Shall Be Ce Compliance. (Group-1) High Power Led Flood Light 350Wattgr-1 , P&F Of Ip 55 Protected Light Controlled Switch Based On Infrared Sensing And Daylight With Built In Over Load Protection Timer To Switch Off At Preselecteedtime .Switch Shall Have 7 Days Power Backup Without Hampering Of Present Time Over Ride Facility For Maintence Purpose . Suitable For 15 Kw Load (Three Phase ) Including Contractor Mcb Cable Glands Terminal Block And Locking. , Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor Isi Marked Is:694) Of 1.1 Kv Grade And Approved Make In Existing Surface Or Recessed Conduit/Casing Capping Including Making Connections Etc. As Required. 4X 2.5 Sq.Mm. , Flexible Copper Conductor Isi Marked (Is:694) Of 1.1 Kv Grade And Approved Make In Existing Surface Or Recessed Conduit/Casing Capping Including Making Connections Etc. As Required. 4 X 16.0 Sq.Mm. , Supply& Fixng Earth Wire And Strip In Horizontal Or Vertical Run In Ground/Surface/Recess Including Riveting/Soldering Saddles Making Conection Etc. As Require 6 Swg Copper Wire , Providing And Fixing In Position Lightening Arrester Set Complete With 600Mm X 600Mm X 6Mm Thick G.I. Earthing Plate Embedded Below Ground In Earthling Pit At 3.5 Metre Depth, G.I. Strip Of Size 25Mmx5mm Thick From Earthing Plate To Top Of Over Head Tank, G.I. Finial Made Of Gi Bar 25Mm Dia And 2M Long Fixed On Top Of Oh Tank And Connected To Gi Strip. The Earthling Set Shall Comply Of Is:3043 Complete In All Respect As Per Specification And The Direction Of The Engineer , S & Laying Following Size ‘B’ Class G.I. Pipe Confirming To Is: 1239 P-1 (1990) With Accessories For Laying Earth Conductor/ Strip/ Cable In Ground/ Surface/ Recess As Required. 50 Mm Dia , P & F Of Aviation Obstruction Light Luminaire Comprising Of Yellow Painted Die Cast Aluminium Alloy Housing, Built In 75 Va Step Up Transformer, Heat Resistant Clear Glass Cover, Neon Spiral Lamp Complete In All Respect , Providing And Laying Un-Reinforced, Dowel Jointed, Plain Cement Concrete Mix In Pavement Over A Prepared Sub Base With 43 Grade Cement, Coarse And Fine Aggregate Conforming To Is: 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Primer, Joint Sealant, Debonding Strip, Dowel Bar, Tie Rod, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades Complete As Per Drawing And As Per Clause 602, 112 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. , Prestressed /Reinforced Cement Concrete With Separating, Cleaning, Straightening And Cutting Of Bars , Providing And Fixing Structural Steel Frame (For Dry Cladding With 30 Mm Thick Gang Saw Cut With Machine Cut Edges Sand Stone) On Walls At All Heights Using M.S. Square/ Rectangular Tube In The Required Pattern As Per Architectural Drawing Including Cost Of Cutting, Bending, Welding Etc. The Frame Work Shall Be Supported In Wall With The Help Of Ms Brackets/ Lugs Of Angle Iron/ Flats Etc. Which Shall Be Welded To The Frame And Embedded In Brick Wall With Cement Concrete Block 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size) Of Size 300X230x300mm Including Cost Of Necessary Centring And Shuttering And With Approved Expansion Hold Fasteners On Cc/Rcc Surface Including Drilling Necessary Holes. Approved Cramps/ Pins Etc. Shall Be Welded To The Frame Work To Support Stone Cladding The Steel Work Will Be Given A Priming Coat Of Zinc Primer As Approved By Engineer-In-Charge And Painted With Two Or More Coats Of Epoxy Paint (Shop Drawings Shall Be Submitted By The Contractor To The Engineer-In-Charge For Approval Before Execution). The Frame Work Shall Be Fixed In True Horizontal & Vertical Lines/Planes. (Only Structural Steel Frame Work Shall Be Measured For The Purpose Of Payment, Stainless Steel Cramps Shall Be Paid For Separately And Nothing Extra Shall Be Paid

INR 1000 /-

INR 116840.0 /-

INR 58.42 Lakhs /-

Name of Work: SITC OF MTR HIGH MAST AT VARIOUS PALCES AT MUNICIPAL AREA RENI (ALWAR)

Sl. No.	Item Description
1	Supply, erection testing and commissioning of high mast lighting system (as per CP3-TRT/1996ofILE,UK)consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries,mastheadassembly,two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial,suitableropes andCCfoundationofM-15gradecompleteas required. Themastis constructedfrommildsteelplates(as perBS-EN 10025)cut and foldedtoformapolygonalsection,telescopicjointedandweldingasperBS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps 20-0Mtr HM (in 2 section) Group 1
2	P & F of IP-66 protected high power LED flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 350 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumen be maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixtures shall be CE compliance. (Group-1) High power LED flood light 350wattGR-1
3	P&F of IP 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . Suitable for 15 kw load (three phase ) including contractor MCB cable glands terminal block and locking.
4	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4x 2.5 sq.mm.
5	flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4 x 16.0 sq.mm.
6	Supply& Fixng earth wire and strip in horizontal or vertical run in ground/surface/recess including riveting/soldering saddles making conection etc. as require 6 SWG copper Wire
7	Providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick G.I. earthing plate embedded below ground in earthling pit at 3.5 metre depth, G.I. strip of size 25mmx5mm thick from earthing plate to top of Over head tank, G.I. Finial made of GI bar 25mm dia and 2m long fixed on top of OH tank and connected to GI strip. The earthling set shall comply of IS:3043 complete in all respect as per specification and the direction of the Engineer
8	S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required. 50 mm dia
9	P & F of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 VA step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect
10	Providing and laying un-reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
11	Prestressed /Reinforced cement concrete with separating, cleaning, straightening and cutting of bars
12	Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of "ZINC" primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid