Military Engineer Services-MES has published Tender For Repair To Floor, Wall, Roof, Joinery Work, Tiling, False Ceiling, Plaster Work Etc, At Alwaye And Repair To Street Light, Security Light, Fire Fighting And Fire Alarm System, Lt Ug Cable, Dg Set, Pumps, Panel, Transformer And Allied Works. Submission Date for this Tender is 16-10-2023. Alarm Systems Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Material & Labour for water proofing treatment to existing RCC roof slab including preparation of surfaces parapet comprising with the following course of treatment/ specification from bottom to top as in repair :- (a) Applying oil bound bituminous primer @ 0.20 kg/Sqm, over plastered surfaces of roof including parapet surfaces. (b) Providing and laying 3 mm thick APP modified water proofing membrane, weight not less than 2.5 Kg per Sqm, reinforced with non woven polyester fabric of weight not less 150 Gms per Sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 800N/Sqcm, tearing strength of 180N by torch -on-application including minimum 10cm side over lap & 15cm end laps. (c) Applying a coat of blown grade hot bitumen 90/15 over the membrane @1.20kg/Sqm. (d) Over the membrane finishing with solar reflective bituminous aluminium paint @ 0.10kg/Sqm. |
| 2 | Material & Labour for 10 mm thick plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane,add WPC @3% of cement weight including WPC, finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Polymeric membrane will be measured and paid separately) |
| 3 | Material & Labour for preparation of existing flat or sloped roof surfaces & wall surfaces including racking out with loose dust ,grease old flake and chips etc and rrack filling with Dr Fixit Crack "X" paste and wet the wall/roof surfaces prior to coating to Dr Fixit prime seal (50% Dilution) and ensure dry for 4 to 5 hour as per Manufacture instructions and finishing the roof/sloped surfaces gaps, undulations filled with Cement Mortar in 1:4 or along with PCC type 1:2:4 B-0 complete all as directed by Engineer in Charge. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thicknesses, including Nainital or similar pattern roof covering nails etc complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Supply & Fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer in Charge. |
| 6 | Dismantling of floor hearth and wall tilling including mortar bedding removing serviceable tiles to store and rubbish off the premises as directed by the Engineer-in-Charge. |
| 7 | Material & Labour for Acid resistant tiles 15mm thick for floor & wall of up to vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over 15mm thick screed in cement mortar (1:4) and pointed with epoxy grouted with suitable pigment (mixed with white cement) to match the colour of tiles as in floor, skirting /dado etc complete all as specified and directed. |
| 8 | Material & Labour for matt finished ceramic coloured tiles 9 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor including 15mm thick screed bed in CM 1:6 set and jointed and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 9 | All as per above Item No 8 but except tiles of any size (refixing in existing tiles with complete cleaning) complete all as specified and as directed by the Engineer-in-Charge |
| 10 | Material & Labour for non skid ceramic coloured tiles 9 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm in floor including 15mm thick screed bed in CM 1:6 set and jointed and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 11 | Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor including 15mm thick screed bed in CM 1:6 set and jointed and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 12 | Material & Labour for ceramic coloured glazed tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting/dado with and including 10mm thick backing coat in CM 1:4 set and jointed and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 13 | Complete removal of existing white cement tiles joints and applying epoxy filler with pigments in all tiled joints with necessary fillers with pigments etc complete all as specified and as directed by Engineer in Charge. (Note: - Tiled Sqm area to be measured for payment purpose) |
| 14 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry bedded in any mortar complete all as specified. |
| 15 | Material & Labour for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified. |
| 16 | Dismantling Single layer Mangalore pattern or similar tiles in roofing bedded in lime or cement mortar including removal of vegetation nails etc complete all as specified and as directed by Engineer in Charge. |
| 17 | Material & Labour for Roof tiles, Mangalore pattern, interlocking at side joints, laid over tiling for eaves tiles or verges, including necessary scaffolding etccomplete all as specified and as directed by Engineer in Charge |
| 18 | All as per Item No 17 but except Tiles ( Refixing in existing tiles) complete all as specified and as directed by Engineer in Charge. |
| 19 | Material & Labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed. |
| 20 | Supply and fix in repair to (Dismantling timber scantling in any position with nails etc) 2nd class hard wood clean sawn, as in scantling in work complete all as specified and directed. |
| 21 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 22 | Supply & Fix structural steel work in tubular trusses and as in purlin, rafter etc on roof including special shaped washer etc or including butt welded tubes conforming to IS:1161-1979 grade St-240 complete all as specified and as directed. |
| 23 | Supply & Fixing Light coloured hollow PVC ceiling of minimum 1.0mm thick with necessary frame work with necessary fixtures fixed as a slope or flat false ceiling including necessary, supporting hangers ,brackets etc for securing frame work to ceiling for suspended grid shall be provided as per Room Size requirement including all fittings complete all as specified and directed. |
| 24 | Fixing only (Any type) in Existing False ceiling with board and snap grid with repairs complete all as specified and as directed by Engineer in Charge |
| 25 | Taking down eaves gutters and rainwater pipes, drain pipes etc(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified |
| 26 | Supply & Fix PVC (SWR or Drain) pipes 110mm bore, single socketed, in any length, with rubber ringsfixed with necessary clamps complete all as specified and as directed. |
| 27 | Supply & Fix PVC (SWR or Drain) pipes 75mm bore, single socketed, in any length, with rubber ringsfixed with necessary clamps complete all as specified and as directed. |
| 28 | Supply & Fix 100mm to 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 29 | Supply & Fix 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 30 | Supply & Fix PVC (SWR) floor trap upto 75mm outlet, plain with grating including jointing with solvent cement including set with Cement Mortar (1:4) complete all as specified. |
| 31 | Supply & Fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. |
| 32 | Supply & Fix in repair to vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 33 | Supply & Fix Vitreous China wash down water closet pan(European type) with P or S trap, snow white or whitecolour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat coveras in repair completeall as specified and directed. |
| 34 | Supply & Fix Vitreous china wash hand basin white flat back of size 550x400 mm ,including brackets, waste coupling and waste pipe, or fixed with existing platform surfaces with sealant with white cement etc completeall as specified and directed. |
| 35 | Supply & Fix in repair to half stall urinal Vitreous China urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, including provision of CP urinal spreader etc complete all as specified and directed. |
| 36 | Taking down & Fixing in same position only with repair toany type ofVitreous China urinals (Urinal, bowl type or half stall pattern,) basin only including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed. |
| 37 | Supply & Fix in repairs, PVC valve less,10 litre capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 38 | Supply & Fix in repair PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed |
| 39 | Supply & Fix in repair to Grating round 140 mm size of PTMT/CP (Minimum weight 50gms) complete all as specified and as directed |
| 40 | Supply & Fix in repair to Plastic water closet seat for EWC /Angelo Indian type, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 41 | Supply & Fix in repair to Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed |
| 42 | Supply & Fix in sealing for (M seal with adhesives) metal area not exceeding 3 Sqcm, sheets bottom surface in roof, water tank, sheet, cladding gaps filling etc for arresting rain water complete all as specified and as directed |
| 43 | Supply & Fix 1mm thick stainless steel sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 44 | Supply & Fix 1mm thick stainless steel sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 45 | Supply & Fix 1000 Litres capacity Rotational mould polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position including taking down unserviceable tank complete all as specified and directed. |
| 46 | Disconnecting existing tanksexceeding500 litre Capacity but not exceeding 1000 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc, and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 47 | Supply and fix in repairs in in trenches/walls/ceiling high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 16 mm dia complete all as specified and directed. |
| 48 | All as per item No 47 here-in-before but of size 20mm dia |
| 49 | Supply & Fix in repair to CP 15mm bore Bib taps, Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer in Charge. |
| 50 | Supply & Fix in repair to 15mm bore CP fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified directed. |
| 51 | Supply & Fix in repair to 15mm bore fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified directed. |
| 52 | Supply & Fix in repair to 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed(Minimum weight for 15mm-142gms) complete all as specified directed. |
| 53 | Supply & Fix in repair to 15mm bore swan neck type Sink tap Fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified directed. |
| 54 | Supply and fix in repairs CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe including necessary fittings and taking down old one complete all specified and directed. |
| 55 | All as per item No. 54 above but of size 16 mm dia. |
| 56 | Supply & Fix in repair to Swivel shower of PTMT with Shower arm 195mm long with bend of 45 degree any colour for fixing with 15mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer in Charge. |
| 57 | Taking down and refixing with repair in existing Wash basins any type , Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing & supply and waste pipe complete all as specified and as directed |
| 58 | Supply & Fix in repair in 32mm bore Waste coupling with waste pipe of PTMT (half or full threaded, Minimum weight 45gms) for HWB ,Sink , etc complete all as specified and as directed by Engineer in Charge |
| 59 | Cleaning and preparing the surfaces of MS steel section and welding in repairs up to metal 10mm thickness with all necessary cleans, welded together in broken sections with necessary repairs complete all as specified and as directed by Engineer in Charge |
| 60 | Supply & Fix Powder coated Anodised aluminium window and ventilator shutters with complete accessories, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed. |
| 61 | Supply & Fix powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 62 | Repairs only in aluminium windows of area not exceeding 1.0 Sqm in each shutter of any type including replacement of beading, hinges, bolts, handles etc, as per existing type and re-fixing the same opening complete all as specified |
| 63 | Taking down shutters exceeding 1 Sqm not exceeding 2 Sqm each and re fixing with same opening after Re securing or easing & adjusting/cutting with a required repair complete all as specified and as directed by Engineer in Charge. |
| 64 | Taking down shutters not exceeding 1 Sqm each and re fixing with same opening after Re-securing or easing &adjusting /cutting with a required repair complete all as specified and as directed by Engineer in Charge. |
| 65 | Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each with shutter (without taking off Shutter) including windows , doors fixed portion etc complete all as specified and as directed by Engineer in Charge. |
| 66 | Taking down shutters not exceeding 1.0 Sqm Each. |
| 67 | Taking down shutters exceeding 1.0 Sqm but not exceeding 2.0 Sqm Each. |
| 68 | Material & Labour for 30 mm thick well seasoned 2nd class hard wood glazed and skeleton shutters as peropen rebated and prepared to receive glass, gauge etc without sash bar, edge of framing plain chamfered or rounded mitered beads for securing glass any numbers as specified in clause 8.24 (a) of MES Schedule Part-I Section-8 complete all as specified and directed. |
| 69 | Material & Labour for 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed. |
| 70 | Material & Labour for2nd class hard wood well seasoned plain solid straight chowkhats framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in wall complete all as specified and directed. |
| 71 | Supply & Fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 72 | Supply & Fix aluminium alloy wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered complete all as specified and directed. |
| 73 | Supply & Fix in repair to aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered complete all as specified and directed. |
| 74 | Hacking out old broken glass (any thickness, size, quality) from wooden frames, glazed with putty or fixed with beads complete as directed by EIC. |
| 75 | Supply & Fix 4mm thick sheet glass selected quality and glazing with oil putty/beading in squares or rectangular in squares not exceeding 0.5 Sqm each pane complete all as specified and directed |
| 76 | Material & Labour for 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed by Engineer in Charge. |
| 77 | Supply & Fix in repair to 20mm dia powder coated aluminium curtain Rod fixed with brackets, Knobs, finial of 2 pieces (Each side) with necessary screws, plugs etc, as in repair complete all as specified and as directed by Engineer in Charge. |
| 78 | Supply & Fix 18 to 19mm thick pre-laminated particle board (including dismantling), flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cupboard shutter, shelves etc, including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & french polishing to edging complete all as specified. |
| 79 | Supply & Fix300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to shutter with screw complete all as specified and directed. |
| 80 | Supply & Fix 100 mm long aluminiumanodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 81 | Supply & Fix 75 mm long aluminiumanodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 82 | Supply & Fix 100 mm long aluminium anodised door handle cast type fixed to shutter with screw complete all as specified and directed. |
| 83 | Supply & Fix Stainless Steel butt hinges 75mm long cold rolled medium weight complete all as specified and as directed. |
| 84 | Supply & Fix Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified. |
| 85 | Supply & Fix in repair to 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 86 | Supply & Fix aluminium extruded body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 87 | Supply & Fix Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,MS stay shall be provided at the bottom to steady the frame as in repair (includingtaking Down unserviceable old PVC /UPVC/FRP Door shutters), complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 88 | Material & Labour for factory made solid single extruded panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gape inside for top rail and bottom rail: paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed PVC the style & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. |
| 89 | Demolition of brick work/solid block workbuilt in cement mortar including all quoins, pillars etc, complete all as specified and as directed |
| 90 | Material & Labour for Pre-cast cement concrete block masonry with solid block type C1, (1:3:6) (20 mm graded aggregate) setting in Cement Mortar 1:6 complete all as specified and directed. |
| 91 | Material & Labour for precast cement concrete solid building block or slabs type C1, 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in Cement Mortar 1:4 complete all as specified and directed. |
| 92 | Taking down cement plaster or brick or stone wall including raking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 93 | Material & Labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on walls finished even and smooth without using extra cement complete all as specified and directed. |
| 94 | Material & Labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on walls even and smooth without using extra cement complete all as specified and directed. |
| 95 | Material & Labour for two coats Distempering with 1st class quality acrylic distemper (ready mixed) on new work having VOC content less than 50 gms/litre, of required shade and colour complete as per manufacturer"s specification complete all as specified and as directed |
| 96 | Material and Labour for preparation of new plastered surfaces of wall and applying priming coat of exterior primer applied @ 2.20 kg/10 sqm andfinishing walls with two coat of Acrylic Smooth exterior paint of required shade @ 1.67 litre/10 sqm complete as per manufacturer"s specification complete all as specified and as directed. |
| 97 | Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exceeding 10 cm width or girth after preparation of surfaces complete all as specified and as directed |
| 98 | Material and Labour for applying one coats of synthetic enamel paint over old wooden surfaces exceeding 10 cm width or girth after preparation of old surfaces complete all as specified and as directed |
| 99 | Applying greasing / Oiling and aligning in existing Steel Rolling shutters in any height and width with smooth workable/rolling conditions as in Rolling Shutters without taking offshutters complete all as specified and directed. |
| 100 | Demolition of unreinforced cement concrete of any description complete all as specified and directed. |
| 101 | Material & Labour for Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate in roof and parapet wall junction, post hole filling, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, filling rails embedded section ,hold fast etc including form work complete all as specified and as directed |
| 102 | Material & Labour for 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, floor and paving etc, surfaces finished of concrete flooring with including provision of necessary construction joints complete all as specified and directed. |
| 103 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, laying of pipes etc or for shaft wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in Soft/loose soil complete all as specified and as directed. |
| 104 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in Hard/dense soil complete all as specified and as directed. |
| 105 | Removing excavated surplus materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 106 | Supply and spreading River sand Dry cushioning to cable in trenches complete all as specified and as directed by the Engineer-in-Charge. |
| 107 | Supply & lay un reinforced pre cast concrete cable cover class LV type 1 flat size 250mmx150mmx40mm for protection of cable complete all as specified and directed. |
| 108 | Supply, laying for replacement of unserviceable underground LT cable 1100 Volts grade heavy duty electric cable XLPE outer sheathing with aluminium conductor, Armoured confirming to IS-7098 Part-I (1988) with latest amendments of size 16 Sqmm x 4 core including taking out old unserviceable cable complete all as specified and directed. |
| 109 | Ditto as per item No 108 above but of LT Cable 35 Sqmm x 3.5 core. |
| 110 | Material and Labour for servicing of HT VCBs, 11 KV 400/630 Amp capacity, indoor type by drawing out breaker assay from panel, cleaning/decarbonizing the contact points by suitable means, applying petroleum jelly, lubrication, adjust the trolley in and out mechanism and moving parts, testing of all tripping system and device, internal wiring circuit etc, tightening of all connections, replacement of HRC fuse (if any found unserviceable ) engage the VCB with the supply system and testing for smooth function complete all as directed. |
| 111 | Material and Labour for calibration of protective relays both 02 Nos over current and 01 No earth fault relay of IDMT or any other type by using relay injection kit and re-set timing and tripping current according to the connected load all as directed. |
| 112 | Supply and filling of new transformer oil having di-electric strength not less than 45 KV complete all as directed. |
| 113 | Material and labour for filtration of insulating oil of transformer, voltage stabilizer’s etc in situation to bring the brake down value of oil not less than 40 KV at 2.5 mm gap all as specified and directed by Engineer-in-Charge including topping up of oil upto required level at different location. |
| 114 | Supply and replacing breather assembly of transformer with new silica gel suitable for any make of transformer of capacity 200 KVA complete as specified. |
| 115 | Comprehensive maintenance to APFC Panel indoor/outdoor including replacement of burnt out bakelite fuse of suitable size or capacitors of various sizes 5/10/20 KVAR and MCBs of any sizes as specified and directed. Note: - All accessories required to be replaced will be measured and paid separately as supply only. |
| 116 | Supply only power capacitor (MPP) in existing capacitor bank of capacity 5 KVAR as specified. |
| 117 | Supply & Fix in repair MCCB 415V 3 phase 50 HZ, 250 Amps 3 pole of breaking capacity 35 KA with adjustable thermal magnetic release setting. |
| 118 | Supply & Fix in repair MCCB 415V 3 phase 50 HZ, 250 Amps 4 pole of breaking capacity 35 KA with adjustable thermal magnetic release setting. |
| 119 | Supply & Fix new generation, energy saving environment friendly, long life LED Street light 60 watt made up of pressure die cast aluminium housing with high power LEDs and secondary lenses with IP 66 protection. System efficacy > 110/120 Lumen Per Watt with 10kv built in surge protection device including taking down old one complete all as specified and directed. |
| 120 | Routine servicing, maintenance of DG Set 62.50 KVA, 6/4 cylinder/DG pump of any make to be carried out including supply & replacement of lubricating oil filter elements, fuel filter elements, air cleaner element inner & outer with necessary "O" ring, Engine oil, making good any leakages of oil, greasing the shaft fan motor, bearings and testing complete all as directed by Engineer-in-Charge. Note: - Engine oil shall be measured and paid separately other parts are to be included in the quoted rates. |
| 121 | Removing the old engine oil from the diesel engine sump of various DG Sets, cleaning the oil sump thoroughly, supply and fill new engine oil multi grade OMD-110/20W 40/SAE 40 in replacement of old engine oil complete all as specified and directed. |
| 122 | Supply and fill coolant for radiator. |
| 123 | Replacement of water pump suitable for 62.50 KVA DG Set by removing/dismantling fan drive assembly, water hose connection and belt including replacement of fan hub bearing and shaft and testing the same after re-fixingcomplete all as directed by Engineer-in-Charge. |
| 124 | Supply & fix in repair AVR unit suitable for 62.5 KVA DG set as per existing make and model. |
| 125 | Material & Labour for overhauling and calibration of fuel injection pump (FIP) for 6/4 cylinder engine 1500 RPM including replacing injector nozzle, steel fuel pipe for FIP to injector, piston spring, worn out nuts and bolts and washers gasket, re-fixing and testing on full load after completion for DG Set 62.50 KVA complete all as directed by Engineer-in-Charge. |
| 126 | Supply & replace by pass flexible pipe suitable for 62.50 KVA Generator set. |
| 127 | Supply & replace fan belt suitable for 62.50 KVA capacities Generator set. |
| 128 | Material & Labour for dismantling of self starter 12/24V from engine and transporting to workshop for repair, opening cleaning and replacing defective bushes, bendix pinion ball bearing, plunger assembly, solenoid switch, carbon brushes, brush spring including varnishing of coils heating, drying etc for DG Set 6.50 KVA complete all as directed. |
| 129 | Servicing of DG Panel, cleaning checking of electric connections, replacing defective components, meter, relays, indicating lamps and all other control systems for the proper functioning of the panel of DG Set 62.50 KVA complete all as directed. |
| 130 | Supply & laying in replacement Galvanised steel tubing of size 40 mm bore, light grade to be fixed on walls or laid under roads for passing cables complete as specified and as directed. |
| 131 | Material & Labour for Earthing complete with GI Steel earth plate electrode 600X600X6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth wire of size 4 mm, dia by means of bolts, nuts, check soldered and riveted to earth plate. Earth wire will be protected by using 40mm dia bore GI pipe light grade. The earthing includes PCC Pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 metres etc complete all as shown in electrical plate No. 3 of SSR Part-I 2009, connected to earthing test point all as specified or indicated including testing on completion including dismantling old one. |
| 132 | Ditto all as per item No 131 but using galvanised Earth plate of 600 x600x6mm with iron strip 25x4mm as earthing lead |
| 133 | Material & Labour for cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm including dismantling old one complete all as specified and directed. |
| 134 | Material & Labour for cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm including dismantling old one complete all as specified and directed. |
| 135 | Material & Labour for heat shrinkable jointing kit straight through joint suitable for LT indoor/outdoor cable end terminal joint (epoxy joints) any type suitable for aluminium conductor cable of size 10 Sqmm to 95 Sqmm 3.5/4 core complete all as specified and directed. |
| 136 | Material & Labour for removing complete covers of the LT Panel board, Cleaning the bus bars with CTC solution, removing the carbon deposits, rust particles etc, tightening the bus bars, bolts, nuts including replacing with required new bolts, nuts, insulating the exposed portion with insulating tapes and replacing the damaged insulators/Hylem sheets etc and re-fixing the covers and testing complete all as specified and directed. |
| 137 | Supply and fix in repair Earthing pit cover made out of CI/MS sheet not less than 6 mm thick as per existing shape and size complete all as specified and directed. |
| 138 | Supply & Fixing addressable manual call point resettable type complete. |
| 139 | Supply and laying of Fire Alarm Cable 2 core FRLS armoured copper cable of 1.5 Sqmm complete all as specified and directed. |
| 140 | Supply, installation, Testing and commissioning of Detectors complying with and type certified to EN-45 addressable type multisensory detector with heat and smoke combination with base complete all as specified and directed. |
| 141 | Comprehensive maintenance of addressable fire alarm system installed at CNAI functionality of all components, cleaning all device , replacement of defective spares / components, comprising of following all as specified and directed :- Make : Morely. (a) Microprocessor based control Panel 2 Loop - 01 No. (b) Electronic siren - 02 Nos (c) Manual call points - 6 Nos. (d) Repeater Panels - 02 Nos. (e) 36 AH Battery - 02 Nos |
| 142 | Material & Labour for cleaning inside RCC UG SUMP of 100000 Litres capacity (at NAE) by removing dirt, sediments, silts, algae etc from internal bottom and wall surfaces of tank using suitable brushes, applying bleaching powder and other cleaning agents as required including writing capacity of tank, date of cleaning and next due date of cleaning on outside the tank using the synthetic enamel paint complete all as specified and directed. |
| 143 | Supply & Fix cast iron body sluice valve heavy duty class PN 1.6 flanged ends any pattern with head wheels & brass spindle ISI marked confirming to IS-14846 of 2000 for 150 mm bore pipe with jointing material, flanged joints, rubber gaskets 6 mm thick, MS wedge nuts & bolts, washers 10 mm thick including dismantling old one complete all as directed. |
| 144 | Cutting of existing cast iron pipe line of up to 150mm bore in position for inserting CI/DI Special such as tees, bend, collar, tail piece etc for fixing of sluice valves/ for branch connection etc. |
| 145 | Supply and fixing up to 150mm dia bore DI/CI special such as bends, tees collars tail pieces confirming to IS-9523 flanged type complete all as specified and directed. |
| 146 | Supply & Fix CI foot valve of 150 mm dia confirming to IS- 4038 complete fixed on suction pipe of pump all as directed |
| 147 | Supply and install fully star delta starter with single phase protection features in sheet steel enclosure type MN motor rating AC 415 Volts, 50 Hz, 3 phase of capacity 10 to 15 HP complete all as specified and directed. |
| 148 | Supply, laying and testing ductile iron pipe flanged 150mm bore spigot class K-9 as per IS-8329 with inside cement lined complete with nut, bolts, packing etc complete all as specified and directed. |
| 149 | Supply & Fix 500 litres capacity Rotational moulded polyethylene water storage tanks (ISI marked) (Cylindrical; vertical with closed top) hoisted & fixed in position including taking down the unserviceable old one complete all as specified and as directed. |
| 150 | Material & Labour for Non return valve 1.6 PN completed confirming to IS 1969 double flanged and drilled including bolts, nuts, washers, gaskets etc complete and dismantling of old one of size 150 mm dia completed all as directed by Engineer-in-Charge. |
| 151 | Supply & Fix Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard completed all as directed |
| 152 | Supply and fix Hydrant valve single headed completed all as directed |
| 153 | Supply and fix Hose reel drum 30 metre completed all as directed |
| 154 | Supply and fix outdoor type, weather proof cable junction box of size not less than 205 x 255 x 112mm, IP-65 suitable to terminate up to 25 Sqmm 4 core and 2 core cables including dismantling old one complete all as specified and directed. |
| 155 | Amount of Credit Schedule shall be deducted to arrive the Contract Sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
