|
| 1 | Supply of 12.50 meter High mast lighting system with its accessordes. Mast staff shall be in two scetions with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanlsed Confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 87S. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 Construction), tralling cable, double drum winch Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrlcally & its cantrol gear (Make of Gear Box: New Allen Berry works / Chandra Gear / Elecon Engineering/ Shanti Engineering) boxes and lightning finish. The mast shall have an integral power tool installed inside the base compartment for its operatlon along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundatlon Bolt, Nut, Washer, and common Template all complete. Luminaire wiring materials not included in this Item (Make: Bajaj/ Transralil/ Utkarsh/ BPP/ Skipper) |
| 2 | Civil foundation work for erection of high mast tower by earth work in excavation of faundatdon trench approx area 1.80m x 1.80m x 1.80m reinforced steel used in foundation 10 mm tor at base and 12mm tor in pedestal as per direction of E.I.C including removing spoils and neccessary trimming the site of trench Ieveling dressing and bottom after that picked jhama bricks solling and dressing bed levelling and filling joints after that disributíon rod proper size stirrups, binder etc and vertically MS rod 12 mm dia foundatlon not less than 8 nos and levellng rod by 8 min dia tor rod 8 inch apart incl. binding with 16 SWG black anneals wire steel shutering and place ment of not less than 8 nos (55 mm dia X 1400 mm long) Foundation bolt with anchor plate of strength and ready mix concrete of M20 grade with graded stone chips 20 mm as per IS 10262 and IS 456 (proportion 1:1.5:3) complete and water regidity next 7 days considering the safe soil bearing capadty and fully decorative with ceremic tiles as per site condittion as per manufacturers design. (charges for concrete scheme board may be included) |
| 3 | Supplying, fitting and fixing stainless steel railing consists of 38 mm dia and 900 mm height vertical balustrade at every two alternative steps, 50 mm dia top rail 3 (three) nos 19 mm dia horizontal Stainless steel pipe and base/cover plate with Stainless steel GRADE 304 containing 7.5 % nickle (interior Grade) Brushed/ Mat finish, complete as Per direction of the Engineer-in-charge. Weight of Stainless Steel raling per metre 6.5 Kg (approx) In gound floor |
| 4 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 noS. of key stones (10 mm) fixed with ?raldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required Lo match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout mtlerials etc. |
| 5 | Erection, testing & commissioning of up to 12.0/ 12.5/ 16.0 meter high mast on the existing civil foundation by bolts with suitable tools, tackles, machines, crane support etc, all complete, as per direction of the ElC |
| 6 | Supplying, fitting & fixing of outstand mounted feeder pillar box cover by 14 SWG CRCA sheet dead front with hinge type double door locking arrangencnt, overall approx dimension 1.00m x 0.75m fabrlcated from 2mm thick MS plate fixing with suitable cement concrete foundation etc. complete with 63 amps FP MCB, 40 amps FP Contractor (L&T make), astronomical timer switch (Cabtree / L&T make), Iron clad busbar chamber on angle iron frame incl. earthing attachment, Toggle switch for Auto/Manual function and necessary wiring with 7x 18 copper wire for wiring as required. |
| 7 | Supply & Fixing of LED Aviation light luminaries of type BGAV 302 LED, comprising of alunminium housing with palycarbonnate enclosure (Make Bajaj) |
| 8 | Supply of 160 watt, 230V AC, 50hz LED flood light Luminaries (IP-65) cheap per luminary made by Cree/Nichla/Osram etc. 130 lms/w, 230v power supply. P.F. 0.9, more than 50000 hrs of life span for LED, color temperature : cool white> 6500k with al die cast fixtuIe; Lux: 30 lm at 20m Make: Philips/Bajaj float light for Bajajmodel may be (Type Turbo Flood light BARFAG 160 Watt LED, Product Code- 169642)/ Magic Qubo with 5 years warranty. |
| 9 | Fixing only flood light with suitable clamps for monting on pole/ mast tower or similar structure. |
| 10 | Supplying of 4 core 16 sqmmXLPE (Armoured) aluminium cable (Havels/ Gloster make) as per IS-7098 part-I for underground trench below 1.00 mtr from GL and mending good damages covering the same by filling with sand atleast 0.50 mtr. |
| 11 | Supplying of 25mm heavy gauge Polythene Pipe. |
| 12 | Laying of one No. cable upto 35 sqmn in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos bricks per metre, induding filling the space between the brick & cable and also the trench with shiited soil, leveling up and restoing surface duly rammed. |
| 13 | Supplying and fixing compression type gland complete with brass glad, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cables as below :For 4 core 16 sq. Mm. |
| 14 | Finishing the end of following XLPE/PVC armoured cables by crimping method incL. supplylng and fixing solderless socket (Dowels make). tapes, anticorrosive paste & Jointing materials : For 4 core 16 sq Mm |
| 15 | Supply and fixing medium gauge Gl pipe (ISl medium) protectlon with necessary fittings and jointing materials as required 50 mm dia. |
| 16 | Excavation of soil for installation of earth electrode and filling and ramming (a) for soft soil. |
| 17 | Earthing with 50 mm dia Gl pipe 3.64mm thick x 3.04 Mts long and 1x4 SWG CI (Hot Dip) wire (4 Mts. Long ), 13 mm dia x 80 mn long GI bolts, double nuts, double washers incl. S & F 15 mm dia Gl pipe protectlon (1 Mts. Long ) to be filled with bitumen partly under the ground level and partly above ground level driven to be average depth of 3.65 Mts below the ground level as below (a) by TATA-Medium GI plpe. |
| 18 | WBSEDCL Connection including all charges (Ancillary) |
| 19 | Transpotation cost of HMT along with 6 Nos. 150 W LED Flood light fitting with each complete with all accessories including timer switch with foundauon erection & commissioning cabling including feeder pillar box to execution site from manufarturers unit. |
| 20 | Sub Total |
| 21 | GST 18% |
| 22 | CESS 1% |