Tender For Ht Interlinking With Covered Conductor - Kingston To Kollaikkal Under Es Chathannoor, chathannoor-Kerala

Tender For Ht Interlinking With Covered Conductor - Kingston To Kollaikkal Under Es Chathannoor-2 Pin Insulator 11Kv Composite Polymeric 3 Disc Insulator 11 Kv Composite Polymeric - Covered Conductor 4 Lightning Arrester 9 Kv 5 Ka Composite Type 5 Cable End Termination Kit 11Kv Xlpe 3X70 Sqmm ( Outdoor ) 6 Dead End Clamp Assembly ( Anchoring Assembly ) For Covered Conductor Up To 95 Sq.Mm 7 Mid Span Joint For 70 Sq.Mm -Ht Covered Conductor ( Compression Type ) 8 Covered Conductor Ht 70 Sqmm 9 Wedge Connector For Ht Covered Conductor 10 Insulator Tie For Covered Conductor 11 Mid Span Joint Set For Covered Conductor Ht 12 Insulation Piercing Connector Set For Covered Conductor Ht 13 Labour 14 Stringing Of One Km 3 Ph 11Kv Line With Xlpe Insulated Acsr Raccoon 15 Providing Bridging At Cut Points For 3 Ph 11Kv Line With Xlpe Insulated Acsr Raccoon 16 Loading Ht Psc Pole From The Stacking Place And Unloading The Same At Work Site ( Transport By Vehicle ) . 17 Loading Ht A Type Pole From The Stacking Place And Unloading The Same At Work Site ( Transport By Vehicle ) . 18 Transporting Poles By Hired Vehicle To A Distance Upto 5Km And Carrying Upto 4 Poles Excluding Loading & Unloading. 19 Drilling Hole Of Various Sizes On Existing Channel / Cross Arm. 20 Cutting Channel / Cross Arm / Angle Iron Into Two Pieces. 21 Transferring Lt 3Ph 4 / 5 Wire Oh Line To Newly Erected Ht / Lt Pole And Refitting All Items To The New Pole. 22 Dismantling And Reconnecting Sph Service Connection From The Oh Line Incl. Lowering Down The Wp Portion. 23 Dismantling And Reconnecting 3Ph Service Connection From The Oh Line Incl. Lowering Down The Wp Portion. 24 Fitting One No. Section Fuse On Lt Line With Dropping Cables, Crimping Sockets, Connecting With Bolt & Nut Etc. 25 Fitting And Erecting One Ht Psc Pole In Position Incl. Fitting Cross Arm, Digging & Backfilling Pit, Drawing Earth Leads. 26 Fitting And Erecting One Ht A Type Pole In Position Incl. Fitting Cross Arm, Digging & Backfilling Pit, Drawing Earth Leads. 27 Fitting And Erecting One Ht Dp Using Psc Pole In Position Incl. Fitting 2 Channel Cross Arms, Digging & Backfilling Pit, Drawing Earth Leads. 28 Fitting And Erecting One Ht Dp Using A Type Pole In Position Incl. Fitting 2 Channel Cross Arms, Digging & Backfilling Pit, Drawing Earth Leads. 29 Fitting And Providing One Ht Stay For 11Kv Pole Incl. Digging & Backfilling Pit. 30 Fitting And Providing One Strut Using Ht Psc Pole Incl. Digging & Backfilling Pit. 31 Fitting And Providing One Ht Fly Stay For 11Kv Pole Using Ht Psc Pole Incl. Digging & Back Filling Pits. 32 Providing One Earth Using Earth Pipe Incl. Digging A Separate Pit At Standard Distance Away From The Pole / Structure & Backfilling. 33 Providing One Driven Earth Using Gi Earth Pipe At Standard Distance Away From The Pole / Structure In Loose Soil. 34 Additional Rate For Excavation Of One Earth Pit ( 2.5M Depth ) In Laterite. 35 Providing One Coil Earth Using Gi Earth Wire, Digging A Separate Pit At Standard Distance Away From The Pole / Structure & Backfilling. 36 Fitting One Set Ab Switch And Giving Connection 37 Conveyance Of One Km 11Kv Line Materials From Section Store / Stacking Place To The Work Site ( Excluding Poles ) . 38 Fitting One Additional 75X40mm. 1.8M Channel Cross Arm In Existing Single Pole Incl. Conveyance Of Materials. 39 Fitting One Additional 2.4M / 3M Channel Cross Arm ( 75X40x6mm ) , In Existing 11Kv Dp Incl. Conveyance Of Materials. 40 Dismantling ( Without Damage ) One Lt Psc / Rcc Pole After Disconnecting Stays, Strut Etc. And Stacking The Same. 41 Dismantling ( Without Damage ) One Lt Psc / Rcc Strut Pole Incl. Removal Of Clamps And Stacking. 42 Additional Rate For Refitting / Redoing One Shackle Set And Reshackling One Span While Renewing Any Type Of Pole. 43 Transferring Lt Sph 2 / 3 Wire Oh Line To Newly Erected Ht / Lt Pole And Refitting All Items To The New Pole. 44 Dismantling One Ordinary Street Light / Cfl / Led Fitting From Existing Pole And Refitting The Same On Newly Erected Pole And Reconnecting. 45 Cutting Trees Beyond 60Cm But Upto And Incl. 120Cm Girth, Cutting Of Trunks / Branches, Removing The Root Completely And Stacking. 46 Providing Concrete Muffing ( 0.45X0.45X1.5M ) Inclusive Of Cost Of All Material ( As Per Specification ) . 47 Stringing One Km Lt 3Ph 5 Wire Line ( Rabbit For Ph And Weasel For N&St.Main ) Incl. Fitting Cross Arms Etc. Removing Touchings And Conveyance Of Materials.

INR 5900 /-

INR 50000.0 /-

INR 18.06 Lakhs /-

Name of Work: HT INTERLINKING WITH COVERED CONDUCTOR - KINGSTON TO KOLLAIKKAL under ES Chathannoor

Sl. No.	Item Description
1	MATERIALS
2	Pin Insulator 11kV Composite Polymeric
3	Disc insulator 11 kV composite polymeric - covered conductor
4	LIGHTNING ARRESTER 9 kV 5 KA COMPOSITE TYPE
5	CABLE END TERMINATION KIT 11kV XLPE 3X70 Sqmm(Outdoor)
6	Dead End Clamp Assembly ( Anchoring Assembly) for Covered Conductor Up to 95 Sq.mm
7	Mid Span Joint for 70 Sq.mm -HT Covered Conductor (Compression Type)
8	Covered Conductor HT 70 sqmm
9	Wedge connector for HT Covered conductor
10	Insulator Tie for Covered Conductor
11	Mid span Joint Set for covered conductor HT
12	Insulation Piercing Connector Set for Covered Conductor HT
13	LABOUR
14	Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon
15	Providing bridging at Cut points for 3 PH 11kV line with XLPE Insulated ACSR Raccoon
16	Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).
17	Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).
18	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.
19	Drilling hole of various sizes on existing Channel/Cross Arm.
20	Cutting Channel/Cross Arm/Angle Iron into two pieces.
21	Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
22	Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.
23	Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.
24	Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
25	Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & backfilling pit, drawing earth leads.
26	Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & backfilling pit,drawing earth leads.
27	Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & backfilling pit, drawing earth leads.
28	Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & backfilling pit, drawing earth leads.
29	Fitting and providing one HT Stay for 11kV pole incl. digging & backfilling pit.
30	Fitting and providing one Strut using HT PSC pole incl. digging & backfilling pit.
31	Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.
32	Providing one Earth using earth pipe incl. digging a separate pit at standard distance away from the pole/structure & backfilling.
33	Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil.
34	Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.
35	Providing one Coil Earth using GI earth wire, digging a separate pit at standard distance away from the pole/structure & backfilling.
36	Fitting one set AB switch and giving connection
37	Conveyance of one km 11kV line materials from section store/stacking place to the work site (excluding poles).
38	Fitting one Additional 75x40mm. 1.8m Channel cross arm in existing single pole incl. conveyance of materials.
39	Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.
40	Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.
41	Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.
42	Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.
43	Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
44	Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.
45	Cutting trees beyond 60cm but upto and incl. 120cm girth, cutting of trunks/branches, removing the root completely and stacking.
46	Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).
47	Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. Fitting cross arms etc. removing touchings and conveyance of materials.